Palladium Complexes of N-Methylcorroles.

Alkylation of one of the inner-core nitrogen atoms is one possible approach to obtain dianionic corrole ligands, suitable for the coordination of divalent metal ions, such as PdII . Inner-core N-methylation can be obtained by treating the corrole with CH3 I, but the reaction conditions should be optimized to limit the formation of the dimethylated derivative. Two regioisomers, the N-21 and the N-22 methyl derivatives are obtained from the reaction, with the first product achieved in a higher amount. Structural characterization of the reaction products evidenced the distortion induced by the introduction of the methyl groups; the N-methylcorroles are chiral compounds, and the enantiomers were separated by chromatography, with their absolute configuration assigned by ECD computation. Palladium insertion was achieved in the case of monosubstituted corroles, but not with the dimethylated macrocycle; X-ray characterization of the complexes showed the distortion of the macrocycles. The Pd complexes do not show luminescence emission, but are able to produce singlet oxygen upon irradiation. The PdII complexes were also inserted in human serum albumin (HSA) and dispersed in water; in this case, the protein protects the corroles from photobleaching, and a switch from the type II to the type I mechanism in reactive oxygen species (ROS) production is observed.

Controlling Electronic Events Through Rational Structural Design in Subphthalocyanine-Corrole Dyads: Synthesis, Characterization, and Photophysical Properties.

Porphyrinoids are considered perfect candidates for their incorporation into electron donor-acceptor (D-A) arrays due to their remarkable optoelectronic properties and low reorganization energies. For the first time, a series of subphthalocyanine (SubPc) and corrole (Cor) were covalently connected through a short-range linkage. SubPc axial substitution strategies were employed, which allowed the synthesis of the target molecules in decent yields. In this context, a qualitative synthetic approach was performed to reverse the expected direction of the different electronic events. Consequently, in-depth absorption, fluorescence, and electrochemical assays enabled the study of electronic and photophysical properties. Charge separation was observed in cases of electron-donating Cors, whereas a quantitative energy transfer from the Cor to the SubPc was detected in the case of electron accepting Cors.

Exploring the Association of Electron-Donating Corroles with Phthalocyanines as Electron Acceptors.

Electron-donating corroles (Cor) were integrated with electron-accepting phthalocyanines (Pc) to afford two different non-covalent Cor ⋅ Pc systems. At the forefront was the coordination between a 10-meso-pyridine Cor and a ZnPc. The complexation was corroborated in a combination of NMR, absorption, and fluorescence assays, and revealed association with binding constants as high as 106  m-1 . Steady-state and time-resolved spectroscopies evidenced that regardless of exciting Cor or Pc, the charge-separated state evolved efficiently in both cases, followed by a slow charge-recombination to reinstate the ground state. The introduction of non-covalent linkages between Cor and Pc induces sizeable differences in the context of light harvesting and transfer of charges when compared with covalently linked Cor-Pc conjugates.

The Difficult Marriage of Triarylcorroles with Zinc and Nickel Ions.

The coordination chemistry of corrole has witnessed a great improvement in the past few years and its Periodic Table has been widened to be so large that it is compared with that of porphyrins. However, Ni and Zn ions, commonly used with porphyrins for both synthetic and theoretical purposes, are sparsely reported in the case of corroles. Here, we report synthetic protocols for preparing Ni and Zn triarylcorrole complexes. In the case of Zn, the preliminary oxidation of the free base corrole in DMSO to the neutral corrole radical is a necessary step to obtain the coordination of the metal ion, because the direct reaction led to the formation of an open-chain tetrapyrrole. The Ni complex could be directly obtained by heating the free base corrole and Ni(II) salt to 100 °C in a DMSO solution containing FeCl3. The non-innocent nature of the corrole ligand for both complexes has been elucidated by EPR, and in the case of the Zn derivative the first spectroelectrochemical characterization is presented.

Advances in Optical Sensors for Persistent Organic Pollutant Environmental Monitoring.

Optical chemical sensors are widely applied in many fields of modern analytical practice, due to their simplicity in preparation and signal acquisition, low costs, and fast response time. Moreover, the construction of most modern optical sensors requires neither wire connections with the detector nor sophisticated and energy-consuming hardware, enabling wireless sensor development for a fast, in-field and online analysis. In this review, the last five years of progress (from 2017 to 2021) in the field of optical chemical sensors development for persistent organic pollutants (POPs) is provided. The operating mechanisms, the transduction principles and the types of sensing materials employed in single selective optical sensors and in multisensory systems are reviewed. The selected examples of optical sensors applications are reported to demonstrate the benefits and drawbacks of optical chemical sensor use for POPs assessment.

Panchromatic Light Harvesting and Stabilizing Charge-Separated States in Corrole-Phthalocyanine Conjugates through Coordinating a Subphthalocyanine.

Owing to the electron-donating and -accepting nature of corroles (Corr) and phthalocyanines (Pc), respectively, we designed and developed two novel covalently linked Corr-Pc conjugates. The synthetic route allows the preparation of the target conjugates in satisfying yields. Comprehensive steady-state absorption, fluorescence, and electrochemical assays enabled insights into energy and electron-transfer processes upon photoexcitation. Coordinating a pyridine-appended subphthalocyanine (SubPc) to the Pc of the conjugate sets up the ways and means to realize the first example of an array composed by three different porphyrinoids, which drives a cascade of energy and charge-transfer processes. Importantly, the SubPc assists in stabilizing the charge-separated state, that is, one-electron oxidized Corr and the one electron-reduced Pc, upon photoexcitation by means of a reductive charge transfer to the SubPc. To the best of our knowledge, this is the first case of an intramolecular oxidation of a Corr within electron-donor-acceptor conjugates by means of just photoexcitation. Moreover, the combination of Corr, Pc, and SubPc guarantees panchromatic absorption across the visible range of the solar spectrum, with the SubPc covering the "green gap" that usually affects porphyrinoids.

A Leopard Cannot Change Its Spots: Unexpected Products from the Vilsmeier Reaction on 5,10,15-Tritolylcorrole.

The reaction of 5,10,15-tritolylcorrole with 3-dimethylaminoacrolein (3-DMA) and POCl3 gives a further example of the rebel reactivity of this contracted macrocycle. While no evidence was obtained for the formation of the expected ß-acrolein corrole, the inner core substituted N21,N22-3-formylpropylcorrole and the 10-acrolein isocorrole were the reaction products. By increasing the temperature or the amount of the Vilsmeier reagent, the 10-isocorrole became the unique reaction product. The formation of the isocorrole by electrophilic attack of the Vilsmeier reagent to the 10-position of the corrole is unprecedented in the porphyrinoids field and it could pave the way for a novel route to the preparation of stable isocorroles.

Porphyrinoids for Chemical Sensor Applications.

Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

ß-Acrolein-Substituted Corroles: A Route to the Preparation of Functionalized Polyacrolein Microspheres for Chemical Sensor Applications.

An efficient ß-functionalization of [5,10,15-tris-(4-methylphenyl)corrolato]cobalt derivatives through a Vilsmeier-type reaction allows the introduction of an acrolein substituent, which is subsequently copolymerized with pure acrolein. The obtained hybrid microspheres are exploited as nanogravimetric chemical sensors. The sensing properties of the developed sensors are tested through exposure to different volatile organic compounds chosen as model analytes. The results show improved sensor sensitivity of the resulting devices for all the tested analytes with respect to sensors functionalized with either corrole or polyacrolein. The enhanced properties are attributed to the accurate and tunable merging of the properties of both exploited materials.

A Highly Emissive Water-Soluble Phosphorus Corrole.

The synthesis, spectroscopic, and optical properties of the water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole have been investigated. The compound was prepared by adopting a novel strategy for the corrole sulfonation, leading to the regioselective isomer in an almost quantitative yield. The phosphorus coordination has a key role in determining the corrole substitution pattern, limiting the formation of poly-substituted species, which affected the reaction of the corrole free base. The resulting complex shows excellent optical properties in terms of emission quantum yield, also in polar protic solvents, including water. 31 P NMR spectroscopy in CD3 OD indicates that the P sulfonate complex has been isolated in a hexacoordinated geometry with two different ligands (L1=-OH, L2=-OCH3 ), and it is prone to axial ligand exchange with methanol, with no evidence of intermediate pentacoordinated species. The morphological characterization of thin layers of the P corrole deposited onto an Au(111) surface showed that the addition of an intermediate layer of reduced graphene oxide allows for a better control of corrole aggregation, inducing also transformation of the Au(111) reconstructed surface.

Extending the corrole ring conjugation: preparation of ß,ß'-fused 2,3-[1',2'-b]pyrazinocorroles.

A novel method for the preparation of corroles with ß-fused pyrazino rings was developed, exploiting a one-pot reaction of 2,3-diaminocorroles (or 2,3,17,18-tetraaminocorroles) with different diones; a variety of π-extended corroles were obtained in moderate yields as copper complexes, which can then be demetallated to give the corresponding free base in good yields.

5,10,15-Triferrocenylcorrole Complexes.

Complexes of 5,10,15-triferrocenylcorrole were synthesized from the crude free-base corrole product obtained by the reaction of ferrocenyl aldehyde and pyrrole. Direct formation of the complex in this manner leads to an increase of the reaction yield by protecting the corrole ring toward oxidative decomposition. The procedure was successful and gave the expected product in the case of the copper and triphenylphosphinecobalt complexes, but an unexpected result was obtained in the case of the nickel derivative, where metal insertion led to a ring opening of the macrocycle at the 5 position, giving as a final product a linear tetrapyrrole nickel complex bearing two ferrocenyl groups. The purified 5,10,15-triferrocenylcorrole complexes have been fully characterized by a combination of spectroscopic methods, electrochemistry, spectroelectrochemistry, and density functional theory calculations. Copper derivatives of 10-monoferrocenyl- and 5,15-diferrocenylcorrole were prepared to investigate how the number and position of the ferrocenyl groups influenced the spectroscopic and electrochemical properties of the resulting complexes. A complete assignment of resonances in the (1)H and (13)C NMR spectra was performed for the cobalt and nickel complexes, and detailed electrochemical characterization was carried out to provide additional insight into the degree of communication between the meso-ferrocenyl groups on the conjugated macrocycle and the central metal ion of the ferrocenylcorrole derivatives.

New example of hemiporphycene formation from the corrole ring expansion.

The reaction of 5,10,15-tris(4-tert-butylphenyl)corrole with 2,3-bis(bromomethyl)-5,6-dicyanopyrazine provides a new example of corrole ring expansion to a hemiporphycene derivative. The ring expansion is regioselective, with insertion of the pyrazine derivative at the 5-position of the corrole ring, affording the corresponding 5-hemiporphycene. Different macrocyclic products accompany formation of the 5-hemiporphycene, depending on the reaction experimental conditions. Br-substitued 5-hemiporphycenes and the 2-Br substituted corrole were obtained in 1,2,4-trichlorobenzene, while in refluxing toluene traces of an inner core substituted corrole were observed together with a significant amount of the unreacted corrole. These results provide an important indication of the reaction pathway. The coordination behavior of the 5-hemiporphycene, together with detailed electrochemical characterization of the free-base and some metal complexes, provides evidence for the reactivity of the peripheral pyrazino group.

Phenyl derivative of iron 5,10,15-tritolylcorrole.

The phenyl-iron complex of 5,10,15-tritolylcorrole was prepared by reaction of the starting chloro-iron complex with phenylmagnesium bromide in dichloromethane. The organometallic complex was fully characterized by a combination of spectroscopic methods, X-ray crystallography, and density functional theory (DFT) calculations. All of these techniques support the description of the electronic structure of this phenyl-iron derivative as a low-spin iron(IV) coordinated to a closed-shell corrolate trianion and to a phenyl monoanion. Complete assignments of the (1)H and (13)C NMR spectra of the phenyl-iron derivative and the starting chloro-iron complex were performed on the basis of the NMR spectra of the regioselectively ß-substituted bromo derivatives and the DFT calculations.

Interaction of tricationic corroles with single/double helix of homopolymeric nucleic acids and DNA.

In this manuscript a multitechnique approach is proposed to characterize the interaction between new tri-N-methylpyridyl corrole (TMPC) and its germanium(IV) derivative (GeTMPC), with single- and double-stranded nucleic acid homopolymers and calf thymus DNA. The specificity of each spectroscopic technique has been exploited to analyze the different aspects of corrole binding. Noteworthy, this approach allows us to distinguish between H aggregation of TMPC in the presence of polyriboadenilic acid (poly(rA)) and J aggregates in the presence of polyribocytidinic acid (poly(rC)) as well as to identify the formation of GeTMPC dimers in the presence of single-stranded poly(rA) and pseudointercalation with single-stranded poly(rC).

Aluminum, gallium, germanium, copper, and phosphorus complexes of meso-triaryltetrabenzocorrole.

5,10,15-Triaryltetrabenzocorrole complexes of aluminum, gallium, germanium, and phosphorus were synthesized by coordination of these metal ions in the preformed triaryltetrabenzocorrole macrocycle, opening a way to the investigation of different metal complexes. The UV-vis spectra of these derivatives exhibit a red shift and broadening of all absorption bands because of the π-extended aromatic system and distortion of the molecular framework. The electrochemical and photophysical behaviors of the free base and the metal complexes of meso-triaryltetrabenzocorrole were investigated and characterized.

Synthesis and characterization of functionalized meso-triaryltetrabenzocorroles.

5,10,15-Triaryltetrabenzocorroles functionalized with different electron-withdrawing groups on the ß,ß'-fused rings have been prepared by a cross-coupling Heck procedure between octabrominated copper corrole and a terminal alkene bearing electron-withdrawing moieties. The spectroscopic characterization of these complexes showed red-shifted UV-vis absorption bands characterized by a significant band broadening. The same feature was observed in the case of NMR spectra, where low-resolution groups of signals were observed. This behavior derives from a strong tendency of these macrocycles to aggregate in solution, as has been demonstrated by an (1)H NMR study performed on one of these tetrabenzocorroles. The influence of the substituents on the fused benzene ring on the properties of the tetrabenzocorroles was investigated by electrochemistry and spectroelectrochemistry, and comparisons were made between properties of the newly synthesized compounds and those of the tetrabenzocorroles reported earlier in the literature.

ß-Pyrazino-fused tetrarylporphyrins.

A novel method for the preparation of ß-fused porphyrin dyads was developed that exploits a one-pot reaction of 2,3-diaminoporphyrins with diethyl oxalate. This approach provides good yields of the zinc ß-fused dyad and the corresponding free-base, opening the way for preparation of several metal derivatives to permit modulation of optoelectronic characteristics for commercial applications.

5- and 10-oxocorroles from ß-octaalkylcorroles.

The reaction of Zn ions with ß-octaalkylcorroles leads to the air oxidation of the macrocycle, with the formation of a mixture of 5- and 10-oxocorroles. Spectroscopic characterization confirms the antiaromatic character of these macrocycles. A simple synthetic protocol opens the way for more detailed studies of oxocorrole chemistry.

ß-Nitro derivatives of iron corrolates.

Two different methods for the regioselective nitration of different meso-triarylcorroles leading to the corresponding ß-substituted nitrocorrole iron complexes have been developed. A two-step procedure affords three Fe(III) nitrosyl products-the unsubstituted corrole, the 3-nitrocorrole, and the 3,17-dinitrocorrole. In contrast, a one-pot synthetic approach drives the reaction almost exclusively to formation of the iron nitrosyl 3,17-dinitrocorrole. Electron-releasing substituents on the meso-aryl groups of the triarylcorroles induce higher yields and longer reaction times than what is observed for the synthesis of similar triarylcorroles with electron-withdrawing functionalities, and these results can be confidently attributed to the facile formation and stabilization of an intermediate iron corrole π-cation radical. Electron-withdrawing substituents on the meso-aryl groups of triarylcorrole also seem to labilize the axial nitrosyl group which, in the case of the pentafluorophenylcorrole derivative, results in the direct formation of a disubstituted iron µ-oxo dimer complex. The influence of meso-aryl substituents on the progress and products of the nitration reaction was investigated. In addition, to elucidate the most important factors which influence the redox reactivity of these different iron nitrosyl complexes, selected compounds were examined by cyclic voltammetry and thin-layer UV-visible or FTIR spectroelectrochemistry in CH(2)Cl(2).