Athermal, fabrication-tolerant Si-SiN FIR filters for a silicon photonics foundry platform.

A means of athermalizing unbalanced Mach-Zehnder interferometers on a 300 mm silicon photonics foundry platform utilizing Si and SiN layers to produce the path imbalance is demonstrated. This technique can be applied to all other forms of finite impulse response filters, such as arrayed waveguide gratings. Wafer scale performance of fabricated devices is analyzed for their expected performance in the target application: odd-even channel (de)-interleavers for dense wavelength division multiplexing links. Finally, a method is proposed to improve device performance to be more robust to fabrication variations while simultaneously maintaining athermality.

Effects of nonlinear loss in high-Q Si ring resonators for narrow-linewidth III-V/Si heterogeneously integrated tunable lasers.

High-Q Si ring resonators play an important role in the development of widely tunable heterogeneously integrated lasers. However, while a high Q-factor (Q > 1 million) is important for ring resonators in a laser cavity, the parasitic high-power density in a Si resonator can deteriorate the laser performance at high power levels due to nonlinear loss. Here, we experimentally show that this detrimental effect can happen at moderate power levels (a few milliwatts) where typical heterogeneously integrated lasers work. We further compare different ring resonators, including extended Si ring resonators and Si3N4 ring resonators and provide practical approaches to minimize this effect. Our results provide explanations and guidelines for high-Q ring resonator designs in heterogeneously integrated tunable lasers, and they are also applicable for hybrid integrated butt-coupled lasers.

2 λ switch.

We demonstrate an elastic multi-wavelength selective switch with up to two wavelength switching capability per crosspoint. We fabricated the switch in a silicon photonics foundry and demonstrated a 17 nm tuning range for ring resonators, with a mean path loss of 2.43 dB. This is a 70% reduction in path loss as compared to previous generations, and we demonstrate a high-speed pulse-amplitude-modulation-4 transmission at 111 Gbps through different paths of the switch.

Multi-wavelength selective crossbar switch.

Here we demonstrate an 8x4 multi-wavelength selective ring resonator based crossbar switch matrix implemented in a 220-nm silicon photonics foundry for interconnecting electronic packet switches in scalable data centers. This switch design can dynamically assign up to two wavelength channels for any port-port connection, providing almost full connectivity with significant reduction in latency, cost and complexity. The switch unit cell insertion loss was measured at 0.8 dB, with an out-of-band rejection of 32 dB at 400 GHz channel separation. All the ring resonator heaters were thermally tuned, with heaters controlled by a custom 64-channel DAC driver. Detailed measurements on the whole switch showed standard deviation of 2 dB in losses across different paths, standard deviation of 0.33 nm in resonant wavelength and standard deviation of 0.01 nm/mW in ring heater tuning efficiency. Data transmission experiments at 40 Gbps showed negligible penalty due to crosstalk paths through the switch.

On-chip wavelength locking for photonic switches.

We present an on-chip wavelength reference with a partial drop ring resonator and germanium photodetector. This approach can be used in ring-resonator-based wavelength-selective switches where absolute wavelength alignment is required. We use the temperature dependence of heater resistance as a temperature sensor. Additionally, we discuss locking speed, statistical variation of heater resistances, and tuning speed of the switches.