Nuclear excitation functions of proton-induced reactions (Ep = 35 - 90 MeV) from Fe, Cu, and Al.

Fe, Cu, and Al stacked foils were irradiated by 90 MeV protons at the Los Alamos Neutron Science Center's Isotope Production Facility to measure nuclear cross sections for the production of medically relevant isotopes, such as 52gMn, 54Mn, 48Cr, 55Co, 58mCo and 57Ni. The decay of radioactive isotopes produced during irradiation was monitored using high-purity germanium gamma spectroscopy over the months following irradiation. Proton fluence was determined using the natAl(p,x)22Na, natCu(p,x)62Zn natCu(p,x)65Zn, and natCu(p,x)56Co monitor reactions. Calculated cross sections were compared against literature values and theoretical TALYS predictions. Notably this work includes the first reported independent cross section measurements of natCu(p,x)58mCo and natCu(p,x)58gCo.

Developing the 134Ce and 134La pair as companion positron emission tomography diagnostic isotopes for 225Ac and 227Th radiotherapeutics.

Developing targeted α-therapies has the potential to transform how diseases are treated. In these interventions, targeting vectors are labelled with α-emitting radioisotopes that deliver destructive radiation discretely to diseased cells while simultaneously sparing the surrounding healthy tissue. Widespread implementation requires advances in non-invasive imaging technologies that rapidly assay therapeutics. Towards this end, positron emission tomography (PET) imaging has emerged as one of the most informative diagnostic techniques. Unfortunately, many promising α-emitting isotopes such as 225Ac and 227Th are incompatible with PET imaging. Here we overcame this obstacle by developing large-scale (Ci-scale) production and purification methods for 134Ce. Subsequent radiolabelling and in vivo PET imaging experiments in a small animal model demonstrated that 134Ce (and its 134La daughter) could be used as a PET imaging candidate for 225AcIII (with reduced 134CeIII) or 227ThIV (with oxidized 134CeIV). Evaluating these data alongside X-ray absorption spectroscopy results demonstrated how success relied on rigorously controlling the CeIII/CeIV redox couple.

A reverse 230U/226Th radionuclide generator for targeted alpha therapy applications.

PURPOSE: Thorium-226 (half-life 30.6 m) is a radionuclide of interest for use in targeted alpha therapy applications. Due to its short half-life, 226Th must be provided through a radionuclide generator system from its parent 230U (20.8 d). Furthermore, as the half-life of 226Th is very short, it should be provided in a form that is directly amenable to use in biomedical applications. METHODS: A reverse radionuclide generator system was developed employing a DGA extraction chromatography column. A 230U/226Th parent/daughter solution in equilibrium is added to a DGA column in >6 M HCl. The parent 230U is eluted first in 0.1 M HNO3 followed by elution of 226Th in 0.1 M citrate buffer pH 5. RESULTS: Thorium-226 was recovered from the radionuclide generator column with >96% yield. Greater than 99.5% of the 230U parent was isolated for reuse in the generator. Long term evaluation over six weeks demonstrated consistent supply of 226Th with greater than 99.5% radionuclidic purity. The only contaminant found in the final product was 230U (<0.5%). CONCLUSIONS: The reverse radionuclide generator described herein was shown to be a feasible method for providing 226Th in high yield, purity and in a chemical form that is amenable for direct use in biomedical applications.

Large-Scale Production of 119mTe and 119Sb for Radiopharmaceutical Applications.

Radionuclides find widespread use in medical technologies for treating and diagnosing disease. Among successful and emerging radiotherapeutics, 119Sb has unique potential in targeted therapeutic applications for low-energy electron-emitting isotopes. Unfortunately, developing 119Sb-based drugs has been slow in comparison to other radionuclides, primarily due to limited accessibility. Herein is a production method that overcomes this challenge and expands the available time for large-scale distribution and use. Our approach exploits high flux and fluence from high-energy proton sources to produce longer lived 119mTe. This parent isotope slowly decays to 119Sb, which in turn provides access to 119Sb for longer time periods (in comparison to direct 119Sb production routes). We contribute the target design, irradiation conditions, and a rapid procedure for isolating the 119mTe/119Sb pair. To guide process development and to understand why the procedure was successful, we characterized the Te/Sb separation using Te and Sb K-edge X-ray absorption spectroscopy. The procedure provides low-volume aqueous solutions that have high 119mTe-and consequently 119Sb-specific activity in a chemically pure form. This procedure has been demonstrated at large-scale (production-sized, Ci quantities), and the product has potential to meet stringent Food and Drug Administration requirements for a 119mTe/119Sb active pharmaceutical ingredient.

Simultaneous Separation of Actinium and Radium Isotopes from a Proton Irradiated Thorium Matrix.

A new method has been developed for the isolation of 223,224,225Ra, in high yield and purity, from a proton irradiated 232Th matrix. Herein we report an all-aqueous process using multiple solid-supported adsorption steps including a citrate chelation method developed to remove >99.9% of the barium contaminants by activity from the final radium product. A procedure involving the use of three columns in succession was developed, and the separation of 223,224,225Ra from the thorium matrix was obtained with an overall recovery yield of 91 ± 3%, average radiochemical purity of 99.9%, and production yields that correspond to physical yields based on previously measured excitation functions.

Evaluation of nitrogen-rich macrocyclic ligands for the chelation of therapeutic bismuth radioisotopes.

INTRODUCTION: The use of α-emitting isotopes for radionuclide therapy is a promising treatment strategy for small micro-metastatic disease. The radioisotope (213)Bi is a nuclide that has found substantial use for targeted α-therapy (TAT). The relatively unexplored aqueous chemistry of Bi(3+), however, hinders the development of bifunctional chelating agents that can successfully deliver these Bi radioisotopes to the tumor cells. Here, a novel series of nitrogen-rich macrocyclic ligands is explored for their potential use as Bi-selective chelating agents. METHODS: The ligands, 1,4,7,10-tetrakis(pyridin-2-ylmethyl)-1,4,7,10-tetraazacyclododecane (L(py)), 1,4,7,10-tetrakis(3-pyridazylmethyl)-1,4,7,10-tetraazacyclododecane (L(pyd)), 1,4,7,10-tetrakis(4-pyrimidylmethyl)-1,4,7,10-tetraazacyclododecane (L(pyr)), and 1,4,7,10-tetrakis(2-pyrazinylmethyl)-1,4,7,10-tetraazacyclododecane (L(pz)), were prepared by a previously reported method and investigated here for their abilities to bind Bi radioisotopes. The commercially available and commonly used ligands 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) and N-[(R)-2-amino-3-(p-isothiocyanato-phenyl)propyl]-trans-(S,S)- cyclohexane-1,2-diamine-N,N,N',N",N"-pentaacetic acid (CHX-A''-DTPA) were also explored for comparative purposes. Radio-thin-layer chromatography (TLC) was used to measure the binding kinetics and stabilities of the complexes formed. The long-lived isotope, (207)Bi (t(1/2)=32 years), was used for these studies. Density functional theory (DFT) calculations were also employed to probe the ligand interactions with Bi(3+) and the generator parent ion Ac(3+). RESULTS: In contrast to DOTA and CHX-A''-DTPA, these nitrogen-rich macrocycles selectively chelate Bi(3+) in the presence of the parent isotope Ac(3+). Among the four tested, L(py) was found to exhibit optimal Bi(3+)-binding kinetics and complex stability. L(py) complexes Bi(3+) more rapidly than DOTA, yet the resulting complexes are of similar stability. DFT calculations corroborate the experimentally observed selectivity of these ligands for Bi(3+) over Ac(3+). CONCLUSION: Taken together, these data implicate L(py) as a valuable chelating agent for the delivery of (213)Bi. Its selectivity for Bi(3+) and rapid and stable labeling properties warrant further investigation and biological studies.