Sustainable Silk-Based Particulate Systems for the Controlled Release of Pharmaceuticals and Bioactive Agents in Wound Healing and Skin Regeneration.

The increasing demand for innovative approaches in wound healing and skin regeneration has prompted extensive research into advanced biomaterials. This review focuses on showcasing the unique properties of sustainable silk-based particulate systems in promoting the controlled release of pharmaceuticals and bioactive agents in the context of wound healing and skin regeneration. Silk fibroin and sericin are derived from well-established silkworm production and constitute a unique biocompatible and biodegradable protein platform for the development of drug delivery systems. The controlled release of therapeutic compounds from silk-based particulate systems not only ensures optimal bioavailability but also addresses the challenges associated with conventional delivery methods. The multifaceted benefits of silk proteins, including their inherent biocompatibility, versatility, and sustainability, are explored in this review. Furthermore, the intricate mechanisms by which controlled drug release takes place from silk-based carriers are discussed.

Recycling of polypropylene by supercritical carbon dioxide for extraction of contaminants from beverage cups. A comparison with polyethylene terephthalate and polylactic acid.

BACKGROUND: EU policies towards a circular economy address plastic packaging as one of the significant concerns and sets ambitious recycling targets. Polyolefins (POs) cannot be recycled for food contact using conventional polyethylene terephthalate (PET) recycling approaches. Thermal degradation prevents the use of high temperatures and, consequently, decontamination of POs may be insufficient when using lower temperatures. Polypropylene (PP) beverage cups were decontaminated using supercritical fluid extraction with carbon dioxide (scCO2 ). Decontamination efficiencies (DEs) of selected markers were determined in challenge tests following European Food Safety Authority guidelines. The effects of time (10-60 min) for PET, polylactic acid (PLA), and PP and temperature (60-80 °C) for PP were studied at constant pressure. The physical properties, sensorial properties, and overall migration of treated scCO2 PP were analysed and compared with virgin PP. RESULTS: PP showed the highest average DE, and PET the lowest, for all the surrogates and in all time conditions. A relative increase in the DE with the increase in process time, particularly for PET and to some extent for PLA, was seen. For PP, no significant impact of time and temperature was observed under the conditions tested. The DE of volatile surrogates was higher than that of semi-volatiles. Results indicate that the scCO2 treatment did not affect the physical and sensorial properties, nor the overall migration of PP, although it contributes to a considerable reduction in extractable n < C24 alkanes. CONCLUSIONS: Results indicate that scCO2 can be used to decontaminate post-consumption PP beverage cups with higher DEs than those for PET and PLA, applying mild processing conditions. © 2022 Society of Chemical Industry.

New prospects in skin regeneration and repair using nanophased hydroxyapatite embedded in collagen nanofibers.

This study reflects an exploitation of a composite matrix produced by electrospinning of collagen and electrospraying of nanophased hydroxyapatite (nanoHA), for skin regeneration applications. The main goal was to evaluate the effect of nanoHA, as source of localized calcium delivery, on human dermal fibroblasts, keratinocytes, and human mesenchymal stem cells (hMSCs) growth, proliferation, differentiation, and extracellular matrix production. This study revealed that calcium ions provided by nanoHA significantly enhanced cellular growth and proliferation rates and prevented adhesion of pathogenic bacteria strains typically found in human skin flora. Moreover, hMSCs were able to differentiate in both osteogenic and adipogenic lineages. Rat subcutaneous implantation of the membranes also revealed that no adverse reaction occurred. Therefore, the mechanically fit composite membrane presents a great potential to be used either as cell transplantation scaffold for skin wound regeneration or as wound dressing material in plastic surgery, burns treatment or skin diseases.

Bioaerogels: Promising Nanostructured Materials in Fluid Management, Healing and Regeneration of Wounds.

Wounds affect one's quality of life and should be managed on a patient-specific approach, based on the particular healing phase and wound condition. During wound healing, exudate is produced as a natural response towards healing. However, excessive production can be detrimental, representing a challenge for wound management. The design and development of new healing devices and therapeutics with improved performance is a constant demand from the healthcare services. Aerogels can combine high porosity and low density with the adequate fluid interaction and drug loading capacity, to establish hemostasis and promote the healing and regeneration of exudative and chronic wounds. Bio-based aerogels, i.e., those produced from natural polymers, are particularly attractive since they encompass their intrinsic chemical properties and the physical features of their nanostructure. In this work, the emerging research on aerogels for wound treatment is reviewed for the first time. The current scenario and the opportunities provided by aerogels in the form of films, membranes and particles are identified to face current unmet demands in fluid managing and wound healing and regeneration.

Expanding the boundaries of silk sericin biomaterials in biomedical applications.

Silk sericin (SS) has a long history as a by-product of the textile industry. SS has emerged as a sustainable material for biomedical engineering due to its material properties including water solubility, diverse impact on biological activities including antibacterial and antioxidant properties, and ability to promote cell adhesion and proliferation. This review addresses the origin, structure, properties, extraction, and underlying functions of this protein. An overview of the growing research studies and market evolution is presented, along with highlights of the most common fabrication matrices (hydrogels, bioinks, porous and fibrous scaffolds) and tissue engineering applications. Finally, the future trends with this protein as a multifaceted toolbox for bioengineering are explored, along with the challenges with SS. Overall, the present review can serve as a foundation for the creation of innovative biomaterials utilizing SS as a fundamental building block that hold market potential.

Expanding the Potential of Self-Assembled Silk Fibroin as Aerogel Particles for Tissue Regeneration.

A newly produced silk fibroin (SF) aerogel particulate system using a supercritical carbon dioxide (scCO2)-assisted drying technology is herein proposed for biomedical applications. Different concentrations of silk fibroin (3%, 5%, and 7% (w/v)) were explored to investigate the potential of this technology to produce size- and porosity-controlled particles. Laser diffraction, helium pycnometry, nitrogen adsorption-desorption analysis and Fourier Transform Infrared with Attenuated Total Reflectance (FTIR-ATR) spectroscopy were performed to characterize the physicochemical properties of the material. The enzymatic degradation profile of the SF aerogel particles was evaluated by immersion in protease XIV solution, and the biological properties by cell viability and cell proliferation assays. The obtained aerogel particles were mesoporous with high and concentration dependent specific surface area (203-326 m2/g). They displayed significant antioxidant activity and sustained degradation in the presence of protease XIV enzyme. The in vitro assessment using human dermal fibroblasts (HDF) confirm the particles' biocompatibility, as well as the enhancement in cell viability and proliferation.

3D-Printed PLA Medical Devices: Physicochemical Changes and Biological Response after Sterilisation Treatments.

Polylactic acid (PLA) has become one of the most commonly used polymers in medical devices given its biocompatible, biodegradable and bioabsorbable properties. In addition, due to PLA's thermoplastic behaviour, these medical devices are now obtained using 3D printing technologies. Once obtained, the 3D-printed PLA devices undergo different sterilisation procedures, which are essential to prevent infections. This work was an in-depth study of the physicochemical changes caused by novel and conventional sterilisation techniques on 3D-printed PLA and their impact on the biological response in terms of toxicity. The 3D-printed PLA physicochemical (XPS, FTIR, DSC, XRD) and mechanical properties as well as the hydrophilic degree were evaluated after sterilisation using saturated steam (SS), low temperature steam with formaldehyde (LTSF), gamma irradiation (GR), hydrogen peroxide gas plasma (HPGP) and CO2 under critical conditions (SCCO). The biological response was tested in vitro (fibroblasts NCTC-929) and in vivo (embryos and larvae wild-type zebrafish Danio rerio). The results indicated that after GR sterilisation, PLA preserved the O:C ratio and the semi-crystalline structure. Significant changes in the polymer surface were found after HPGP, LTSF and SS sterilisations, with a decrease in the O:C ratio. Moreover, the FTIR, DSC and XRD analysis revealed PLA crystallisation after SS sterilisation, with a 52.9% increase in the crystallinity index. This structural change was also reflected in the mechanical properties and wettability. An increase in crystallinity was also observed after SCCO and LTSF sterilisations, although to a lesser extent. Despite these changes, the biological evaluation revealed that none of the techniques were shown to promote the release of toxic compounds or PLA modifications with toxicity effects. GR sterilisation was concluded as the least reactive technique with good perspectives in the biological response, not only at the level of toxicity but at all levels, since the 3D-printed PLA remained almost unaltered.

Exploring Silk Sericin for Diabetic Wounds: An In Situ-Forming Hydrogel to Protect against Oxidative Stress and Improve Tissue Healing and Regeneration.

Chronic wounds are one of the most frequent complications that are associated with diabetes mellitus. The overproduction of reactive oxygen species (ROS) is a key factor in the delayed healing of a chronic wound. In the present work, we develop a novel in situ-forming silk sericin-based hydrogel (SSH) that is produced by a simple methodology using horseradish peroxidase (HRP) crosslinking as an advanced dressing for wound healing. The antioxidant and angiogenic effects were assessed in vitro and in vivo after in situ application using an excisional wound-healing model in a genetically-induced diabetic db/db mice and though the chick embryo choriollantoic membrane (CAM) assay, respectively. Wounds in diabetic db/db mice that were treated with SSH closed with reduced granulation tissue, decreased wound edge distance, and wound thickness, when compared to Tegaderm, a dressing that is commonly used in the clinic. The hydrogel also promoted a deposition of collagen fibers with smaller diameter which may have had a boost effect in re-epithelialization. SSH treatment slightly induced two important endogenous antioxidant defenses, superoxide dismutase and catalase. A CAM assay made it possible to observe that SSH led to an increase in the number of newly formed vessels without inducing an inflammatory reaction. The present hydrogel may result in a multi-purpose technology with angiogenic, antioxidant, and anti-inflammatory properties, while advancing efficient and organized tissue regeneration.

In Situ Forming Silk Sericin-Based Hydrogel: A Novel Wound Healing Biomaterial.

In situ cross-linked hydrogels have the advantage of effectively fulfilling the wound in its shape and depth. Amongst the new generation of natural-based biopolymers being proposed for wound care and skin regeneration, silk sericin is particularly interesting due to its exceptional properties such as biocompatibility, biodegradability, and antioxidant behavior, among others. In this study, a new enzyme-mediated cross-linked hydrogel composed of silk sericin is proposed for the first time. The developed hydrogel cross-linking strategy was performed via horseradish peroxidase, under physiological conditions, and presented gelling kinetics under 3 min, as demonstrated by its rheological behavior. The hydrogels presented a high degree of transparency, mainly due to their amorphous conformation. Degradation studies revealed that the hydrogels were stable in phosphate buffer solution (PBS) (pH 7.4) for 17 days, while in the presence of protease XIV (3.5 U/mg) and under acute and chronic physiological pH values, the stability decreased to 7 and 4 days, respectively. During protease degradation, the present sericin hydrogels demonstrated antioxidant activity. In vitro studies using an L929 fibroblast cell line demonstrated that these hydrogels were noncytotoxic, promoting cell adhesion and massive cell colonization after 7 days of culture, demonstrating that cells maintained their viability and proliferation. In addition, the application of sericin-based hydrogel in an in vivo diabetic wound model validated the feasibility of the in situ methodology and demonstrated a local anti-inflammatory effect, promoting the healing process. This study presents a simple, fast, and practical in situ approach to produce a sericin-based hydrogel able to be applied in low exudative chronic wounds. Moreover, the study herein reported fosters the valorization of a textile industrial by-product by its integration in the biomedical field.

Phthalic anhydride esterified chicha gum: characterization and antibacterial activity.

The objective of this research was to modify chicha gum with phthalic anhydride to obtain a new biologically active material. The chemical modification of the gum structure was proven through FTIR, elemental analysis, XRD, TG, and DSC. The derived materials demonstrated excellent inhibitory effect against P. aeruginosa and K. pneumoniae species (rating 100% inhibition) and could also inhibit Escherichia coli growth. The best antimicrobial activity observed for the derivatives suggests that chicha gum hydrophobization due to the addition of phthalic groups improved the interaction of these derivatives with bacterial cell wall components. On the other hand, the derivatives increased CC50 in macrophages but did not present acute toxicity or hemolytic activity, indicating that they are promising for use in prophylaxis or treatment of infections caused by Gram-negative bacteria.

Glycerylphytate crosslinker as a potential osteoinductor of chitosan-based systems for guided bone regeneration.

Chitosan-based membranes are promising systems for guided bone regeneration. In this work, we used glycerylphytate as ionic crosslinker and osteinductor compound for the fabrication of chitosan membranes as supports for human mesenchymal stem cells. Three different glycerylphytate-crosslinked membranes were developed by changing the crosslinker concentration, from 2.5-10 wt-%, respect to chitosan. Physico-chemical characterization in terms of composition, morphology, and thermal behavior was further analyzed. Swelling degree, crosslinking density, and crosslinker release showed a glycerylphytate content-dependent behavior. Glycerylphytate suggested to improve osteointegration ability of chitosan surfaces by the formation of apatite-like aggregates after incubation in body simulated fluid. Stem cells cultured on the membranes increased their viability over time, and the incorporation of glycerylphytate improved osteogenic and osteoinductivity potential of chitosan by increasing calcium deposition and alkaline phosphatase (ALP) activity on cultured stem cells. These results demonstrated a potential application of glycerylphytate-crosslinked chitosan systems for promising bone tissue regeneration.

Modified chicha gum by acetylation for antimicrobial and antiparasitic applications: Characterization and biological properties.

It was developed a material to act as an antimicrobial and antiparasitic agent through a modification reaction in the gum structure extracted from the plant Sterculia striata. This material was characterized, the oxidant activity was evaluated and the antimicrobial activity against Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium and Klebsiella pneumoniae was investigated, in addition to the effect against Leishmania amazonensis, testing its acute toxicity and its cytotoxicity in human cells. Characterization techniques proved the success of chemical modification. The modification led to an increase in antioxidant activity, with excellent antibacterial activity, reaching almost 100% inhibition for P. aeruginosa and S. Typhimurium, and inhibitory effect above 70% against L. amazonensis, with an affinity far superior to the parasite than macrophages. The derivative showed no acute toxicity, it was non-hemolytic, increased cell viability in macrophages and fibroblasts, and stimulated cell proliferation of keratinocytes, thus being a strong candidate to be used as an antimicrobial and antiparasitic agent in biomedical applications.