Eco-conception of Highly Salt-Tolerant Alkyl Ether Carboxylate Hydrotropes with a Glyceryl Spacer.

New alkyl ether carboxylates with a glyceryl spacer instead of ethylene glycol units have been synthesised using environmentally friendly methodology. A cascade synthesis of acetalisation and hydrogenolysis was developed to obtain products containing an alkyl chain linked to a glycerol unit bearing a polar carboxylate head. These products were methylated by using trimethyl phosphate to observe the influence of a free or methoxylated alcohol on the physicochemical properties. Finally, saponification gave the carboxylate anionic group of the new hydrotropes. Studying the amphiphilicity, the tolerance to sodium and calcium ions, and the solubilising power of these bio-based ionic/nonionic hydrotropes has shown that they exhibit significantly improved application properties compared to similar petro-based hydrotropes.

The Salinity-Phase-Inversion method (SPI-slope): A straightforward experimental approach to assess the hydrophilic-lipophilic-ratio and the salt-sensitivity of surfactants.

HYPOTHESIS: The salinity at which the dynamic phase inversion of the reference system C10E4/n-Octane/Water occurs in the presence of increasing amounts of a test surfactant S2 provides quantitative information on the hydrophilic/lipophilic ratio and on the sensitivity to NaClaq of S2. EXPERIENCES: The Salinities causing the Phase Inversion (SPI) of the reference system mixed with 12 ionic and 10 nonionic well-defined surfactants are determined in order to quantify the contributions of the nature of the polar head and of the alkyl chain length. FINDINGS: The SPI varies linearly upon the addition of S2. The slope of the straight variation with the molar fraction of S2 is called the "SPI-slope". It quantifies the hydrophilic/lipophilic ratio of S2 in saline environment and its salt-sensitivity with respect to the reference surfactant C10E4. The SPI-slopes of C12 surfactants bearing different polar heads are found to decrease in the following order: C12NMe3Br > C12E8 > C12E7 ≥C12SO3Na ≈ C12COONa ≥ C12SO4Na > C12E6 > C12E5 > C12E3. This classification is different from that obtained when the phase inversion is caused by a change in temperature (PIT-slope method) because the addition of NaCl in significant amounts (3 to 10 wt%) partially screens the ionic heads and diminishes their apparent hydrophilicities. A simple model, valid for all types of nonionic surfactants, is developed on the basis of the HLDN equation (Normalized Hydrophilic-Lipophilic Deviation) to express the SPI-slope as a function of the hydrophilic/lipophilic ratio (PACN2) and the salinity coefficient (δ2) of S2. All studied surfactants are positioned on a 2D map according to the values of their SPI-slope and their PIT-slope to graphically highlight their hydrophilic/lipophilic ratio and their salt-sensitivity. Finally, a linear model connecting the PIT-slope and the SPI-slope is derived for nonionics, emphasizing that the thermal partitioning of C10E4 towards n-octane is much greater in the PIT-slope than in the SPI-slope experiments.

Salt-tolerance of alkyl-glyceryl ether carboxylates hydrotropes and surfactants. Dramatic effect of the methylation of the glyceryl spacer.

HYPOTHESIS: The insertion of polyether spacers between the anionic head and the alkyl chain of ionic surfactants significantly improves their salt-tolerance. The aim of this work is to study whether the petro-based polyethoxy spacer can be replaced by a glyceryl ether group for high salinity applications. EXPERIMENTS: A series of amphiphilic sodium salts of alkyl glyceryl ether carboxylates are synthesized with different alkyl chain lengths from 4 to 12 and various spacers between the glyceryl and the carboxylate groups. Their aggregation behavior is studied by tensiometry and their amphiphilicities are assessed by the PIT-slope method. The dramatic effect of the methylation of the glyceryl spacer on the salt-tolerance is highlighted, and rationalized by DFT calculations and molecular dynamics. FINDINGS: In contrast to the corresponding sodium soap, n-C6H13-CO2Na, and to the non-methylated counterpart, the sodium salt of 1-pentyl-3-methyl glyceryl ether methylene carboxylate ([5.0.1]-CH2CO2Na) exhibits an excellent salt-tolerance since it remains water-soluble with NaCl or CaCl2 concentrations greater than 20 wt% at 25 °C. Amphiphiles with short alkyl chains (

Hexahydrofarnesyl as an original bio-sourced alkyl chain for the preparation of glycosides surfactants with enhanced physicochemical properties.

Five new bio-based surfactants have been synthetized by coupling hexahydrofarnesol with mono and di-saccharides. Hexahydrofarnesol (3,7,11-trimethyl-dodecan-1-ol) is a by-product of the industrial production of farnesane, a sustainable aviation fuel obtained by a fermentation process from sugar feedstocks. Using hexahydrofarnesol as the lipophilic starting material allows obtaining 100% bio-based surfactants while valorizing an industrial by-product. Moreover, the C15-branched alkyl chain brings unique properties to the surfactants. This paper presents a physicochemical characterization of these new surfactants including their behaviors in water (water solubility, critical micellar concentration and surface tension) and in oil/water systems (interfacial tension against model oil and ternary phase behavior). Their hydrophilicities have been determined thanks to the PIT-slope method and compared to the ones of standard surfactants with linear alkyl chains, in order to distinguish the contributions of the sugar polar heads and of the branched hexahydrofarnesyl lipophilic chain. This novel class of surfactants combines the properties of sugar-based surfactants (low sensitivity to temperature and salinity, ability to form Winsor III microemulsion systems over a wide range of salinity), along with specificities linked to the branched alkyl chain (lower Krafft temperature, low surface tension).

Use of the normalized hydrophilic-lipophilic-deviation (HLDN) equation for determining the equivalent alkane carbon number (EACN) of oils and the preferred alkane carbon number (PACN) of nonionic surfactants by the fish-tail method (FTM).

The standard HLD (Hydrophilic-Lipophilic-Deviation) equation expressing quantitatively the deviation from the "optimum formulation" of Surfactant/Oil/Water systems is normalized and simplified into a relation including only the three more meaningful formulation variables, namely (i) the "Preferred Alkane Carbon Number" PACN which expresses the amphiphilicity of the surfactant, (ii) the "Equivalent Alkane Carbon Number" EACN which accurately reflects the hydrophobicity of the oil and (iii) the temperature which has a strong influence on ethoxylated surfactants and is thus selected as an effective, continuous and reversible scanning variable. The PACN and EACN values, as well as the "temperature-sensitivity-coefficient"τ of surfactants are determined by reviewing available data in the literature for 17 nonionic n-alkyl polyglycol ether (CiEj) surfactants and 125 well-defined oils. The key information used is the so-called "fish-tail-temperature" T* which is a unique data point in true ternary CiEj/Oil/Water fish diagrams. The PACNs of CiEj surfactants are compared with other descriptors of their amphiphilicity, namely, the cloud point, the HLB number and the PIT-slope value. The EACNs of oils are rationalized by the Effective-Packing-Parameter concept and modelled thanks to the COSMO-RS theory.

Using the dynamic Phase Inversion Temperature (PIT) as a fast and effective method to track optimum formulation for Enhanced Oil Recovery.

HYPOTHESIS: The attainment of ultralow interfacial tensions between crude oil and injected aqueous surfactant mixtures is a prerequisite for an effective chemical Enhanced Oil Recovery (EOR). The dynamic Phase Inversion Temperature (PIT) of SOW emulsified systems is very close to the "optimum temperature" currently identified with equilibrated SOW systems. Therefore, the PIT could be a tool to track the "optimum formulation" and determine EACN of crude oils. Additionally, the PIT-slope method could be used to characterize EOR surfactants. EXPERIMENTS: The PIT of 3% C10E4/crude oils/water emulsions are compared to the PIT for n-alkanes in order to estimate crude oils EACN. The "PIT-slope" method is applied to different non-ionic and ionic extended EOR surfactants to assess their amphiphilicity. The conductivity profiles of different EOR surfactants/crude oil/NaCl(aq) emulsions at fw = 0.5 are determined at different salinities. FINDINGS: Considering the PIT shifts and shapes, it is possible to infer relevant information on the crude oil such as precise EACN and relationships between optimum salinity and temperature. The "PIT-Slope method" allows ranking EOR surfactants according to their amphiphilicity. Mixing both results allows a faster determination of key parameters used in EOR compared to studies with equilibrated system.

Catastrophic Emulsion Inversion Process of Highly Viscous Isosorbide Biobased Polyester Monitoredin situ by Torque and Light Backscattering.

Highly viscous hydrophobic isosorbide biobased polyester O/W emulsions are prepared through catastrophic phase inversion. The process is followed in situ with two different methods: torque and light backscattering (LBS). Considering high viscosity of the system, only discontinuous conductivity monitoring is performed for comparison. Torque and LBS allow to highlight the emulsion inversion point (EIP) with relatively close water weight fraction values (fw≈0.20). The torque and LBS signals are rather noisy before inversion (evolution of different structures) and more smooth after phase inversion (continuous aqueous phase). Torque gives a more macroscopic information, representative of the global state of the dispersion. Consistent conductivity and torque measurements suggest indeed an inversion pathway through multiple o/W/O emulsions leading to multiple complex structures before getting continuous aqueous final emulsion. This hypothesis is confirmed with continuous LBS monitoring and microscopic observations. LBS signal seems more complete because it combines the information of conductivity and torque and allows to clearly follow in situ the inversion from the beginning to the end of the process.

Carnitine alkyl ester bromides as novel biosourced ionic liquids, cationic hydrotropes and surfactants.

HYPOTHESIS: In contrast to anionic and nonionic amphiphilic substances, bio-based cationic ones are very rare. Cationic amphiphiles are mostly based on quaternary ammonium, pyridinium or imidazolium groups that are either badly biodegradable or have toxic residues even after degradation. In the search for green alternatives to cationic hydrotropes and amphiphiles, natural l-carnitine could be a promising candidate for a cationic headgroup. EXPERIMENTS: By esterification of carnitine in one step and with low cost, cationic molecules with alkyl chain length of n=2-14 could be obtained. Their thermal properties, aggregation behaviour and cytotoxicity were determined. Hydrophobic compounds were solubilized in their aqueous solutions and the PIT-slope method was applied to determine a relative hydrophilicity. FINDINGS: It was found that some pure carnitine ester bromides were liquid at room temperature and thus can be classified as ionic liquids. They are highly water-soluble, and in aqueous solutions, they showed hydrotrope or surfactant behaviour depending on their alkyl chain length. Their high hydrotropic efficiency was demonstrated by solubilizing Disperse Red 13, while also biomolecules, like vanillin, could be dissolved in reasonable amounts. In all tests, they performed at least as good as the tested reference substances, while showing similar cytotoxicity towards human skin keratinocytes, thus demonstrating their potential as green functional amphiphilic molecules of positive charge.

Structure-interfacial properties relationship and quantification of the amphiphilicity of well-defined ionic and non-ionic surfactants using the PIT-slope method.

The Phase Inversion Temperature of a reference C10E4/n-Octane/Water system exhibits a quasi-linear variation versus the mole fraction of a second surfactant S2 added in the mixture. This variation was recently proposed as a classification tool to quantify the Hydrophilic-Lipophilic Balance (HLB) of commercial surfactants. The feasibility of the so-called PIT-slope method for a wide range of well-defined non-ionic and ionic surfactants is investigated. The comparison of various surfactants having the same dodecyl chain tail allows to rank the polar head hydrophilicity as: SO3Na⩾SO4Na⩾NMe3Br>E2SO3Na≈CO2Na⩾E1SO3Na⩾PhSO3Na>Isosorbide(exo)SO4Na≫IsosorbideendoSO4Na≫E8⩾NMe2O>E7>E6⩾Glucosyl>E5⩾Diglyceryl⩾E4>E3>E2≈Isosorbide(exo)>Glyceryl>Isosorbide(endo). The influence on the surfactant HLB of other structural parameters, i.e. hydrophobic chain length, unsaturation, replacement of Na(+) by K(+) counterion, and isomerism is also investigated. Finally, the method is successfully used to predict the optimal formulation of a new bio-based surfactant, 1-O-dodecyldiglycerol, when performing an oil scan at 25 °C.

Classification of ester oils according to their Equivalent Alkane Carbon Number (EACN) and asymmetry of fish diagrams of C10E4/ester oil/water systems.

The phase behavior of well-defined C10E4/ester oil/water systems versus temperature was investigated. Fifteen ester oils were studied and their Equivalent Alkane Carbon Numbers (EACNs) were determined from the so-called fish-tail temperature T* of the fish diagrams obtained with an equal weight amount of oil and water (f(w)=0.5). The influence of the chemical structure of linear monoester on EACN was quantitatively rationalized in terms of ester bonds position and total carbon number, and explained by the influence of these polar oils on the "effective" packing parameter of the interfacial surfactant, which takes into account its entire physicochemical environment. In order to compare the behaviors of typical mono-, di-, and triester oils, three fish diagrams were entirely plotted with isopropyl myristate, bis (2-ethylhexyl) adipate, and glycerol trioctanoate. When the number of ester bonds increases, a more pronounced asymmetry of the three-phase body of the fish diagram with respect to T* is observed. In this case, T* is much closer to the upper limit temperature Tu than to the lower limit temperature Tl of the three-phase zone. This asymmetry is suggested to be linked to an increased solubility of the surfactant in the oil phase, which decreases the surfactant availability for the interfacial pseudo-phase. As a consequence, the asymmetry depends on the water-oil ratio, and a method is proposed to determine the fw value at which T* is located at the mean value of Tu and Tl.