Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities.

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-ß-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21-26 mM phosphate-borate buffer pH 9.50-9.77; 65.0 mM sodium dodecyl sulfate; 0.25-1.29% v/v n-butanol; 21-26 mM dimethyl-ß-cyclodextrin; temperature, 22 °C; voltage, 23-29 kV. The method was validated and applied to ampoules drug products.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures' development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012-2022) on the applicability of CE methods in chiral drug impurity profiling.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review.

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

Liquid chromatographic/electrospray ionization quadrupole/time of flight tandem mass spectrometric study of polyphenolic composition of different Vaccinium berry species and their comparative evaluation.

Ultra-high-performance liquid chromatography coupled with high-resolution quadrupole-time of flight mass spectrometry with both negative and positive ionization was used for comprehensively investigating the phenolic and polyphenolic compounds in berries from three spontaneous or cultivated Vaccinium species (i.e., Vaccinium myrtillus, Vaccinium uliginosum subsp. gaultherioides, and Vaccinium corymbosum). More than 200 analytes, among phenolic and polyphenolic compounds belonging to the classes of anthocyanins, monomeric and oligomeric flavonols, flavanols, dihydrochalcones, phenolic acids, together with other polyphenolic compounds of mixed structural characteristics, were identified. Some of the polyphenols herein investigated, such as anthocyanidin glucuronides and malvidin-feruloyl-hexosides in V. myrtillus, or anthocyanindin aldopentosides and coumaroyl-hexosides in V. uliginosum subsp. gaultherioides and a large number of proanthocyanidins with high molecular weight in all species, were described for the first time in these berries. Principal component analysis applied on original LC-TOF data, acquired in survey scan mode, successfully discriminated the three Vaccinium berry species investigated, on the basis of their polyphenolic composition, underlying one more time the fundamental role of mass spectrometry for food characterization.

Analytical Quality by Design in pharmaceutical quality assurance: Development of a capillary electrophoresis method for the analysis of zolmitriptan and its impurities.

A fast and selective CE method for the determination of zolmitriptan (ZOL) and its five potential impurities has been developed applying the analytical Quality by Design principles. Voltage, temperature, buffer concentration, and pH were investigated as critical process parameters that can influence the critical quality attributes, represented by critical resolution values between peak pairs, analysis time, and peak efficiency of ZOL-dimer. A symmetric screening matrix was employed for investigating the knowledge space, and a Box-Behnken design was used to evaluate the main, interaction, and quadratic effects of the critical process parameters on the critical quality attributes. Contour plots were drawn highlighting important interactions between buffer concentration and pH, and the gained information was merged into the sweet spot plots. Design space (DS) was established by the combined use of response surface methodology and Monte Carlo simulations, introducing a probability concept and thus allowing the quality of the analytical performances to be assured in a defined domain. The working conditions (with the interval defining the DS) were as follows: BGE, 138 mM (115-150 mM) phosphate buffer pH 2.74 (2.54-2.94); temperature, 25°C (24-25°C); voltage, 30 kV. A control strategy was planned based on method robustness and system suitability criteria. The main advantages of applying the Quality by Design concept consisted of a great increase of knowledge of the analytical system, obtained throughout multivariate techniques, and of the achievement of analytical assurance of quality, derived by probability-based definition of DS. The developed method was finally validated and applied to the analysis of ZOL tablets.

The successful binomium of multivariate strategies and electrophoresis for the Quality by Design separation of a class of drugs: the case of triptans.

Quality by Design (QbD) approach was followed having as analytical target profile the determination of different antimigraine drugs (seven triptans, TRP) available on the market. Multivariate strategies were used for defining the design space and solvent-modified MEKC was the selected analytical method. The versatility of electrophoretic technique, allowing a fine modulation of experimental parameters, made it possible to define the design space (DS). The DS limited a suitable range of experimental parameters in which all possible combinations of variables led to an electrokinetic method able to determine all the considered analytes with a predefined quality. Design of experiments and risk analysis fully assisted the method development from the initial investigation of MEKC knowledge space to the DS definition and finally to the control strategy. Applying the working operative conditions, the baseline separation of TRP was obtained in less than 9 min. The method was finally used for the quantification of three TRP in different pharmaceutical products.

Fast analysis of glibenclamide and its impurities: quality by design framework in capillary electrophoresis method development.

A fast capillary zone electrophoresis method for the simultaneous analysis of glibenclamide and its impurities (I(A) and I(B)) in pharmaceutical dosage forms was fully developed within a quality by design framework. Critical quality attributes were represented by I(A) peak efficiency, critical resolution between glibenclamide and I(B), and analysis time. Experimental design was efficiently used for rapid and systematic method optimization. A 3(5)//16 symmetric screening matrix was chosen for investigation of the five selected critical process parameters throughout the knowledge space, and the results obtained were the basis for the planning of the subsequent response surface study. A Box-Behnken design for three factors allowed the contour plots to be drawn and the design space to be identified by introduction of the concept of probability. The design space corresponded to the multidimensional region where all the critical quality attributes reached the desired values with a degree of probability π ≥ 90%. Under the selected working conditions, the full separation of the analytes was obtained in less than 2 min. A full factorial design simultaneously allowed the design space to be validated and method robustness to be tested. A control strategy was finally implemented by means of a system suitability test. The method was fully validated and was applied to real samples of glibenclamide tablets.

Analytical quality by design in the development of a cyclodextrin-modified capillary electrophoresis method for the assay of metformin and its related substances.

Quality by Design (QbD) is a new paradigm of quality to be applied to pharmaceutical products and processes, recently encouraged by International Conference on Harmonisation guidelines. In this paper QbD approach was applied to the development of a CE method for the simultaneous assay of metformin hydrochloride (MET) and its main impurities. QbD strategy was focused on electrophoretic process understanding, and the analytical method was thoroughly evaluated by applying risk assessment and chemometric tools. Method scouting allowed CD-CZE based on the addition of carboxymethyl-ß-CD to Britton-Robinson acidic buffer to be chosen as operative mode. Seven critical process parameters (CPPs) were selected, related to capillary, injection, BGE and instrumental settings. The effect of the different levels of the CPPs on critical quality attributes (CQAs), e.g. critical resolution values and analysis time, was evaluated in a screening study. Response surface methodology led to draw contour plots and sweet spot plots. The definition of design space was accomplished by applying Monte-Carlo simulations, thus identifying by risk of failure maps a multivariate zone where the CQAs fulfilled the requirements with a selected probability. Finally, a control strategy was designed and the method was applied to a real sample of MET tablets.

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review.

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log KOW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.

Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling.

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

Optimization of hydrolysis conditions of amino acid analysis for UHPLC-UV antigens content determination: Bexsero vaccine a case study.

In the present study the compositional analysis of the amino acids released by the acidic hydrolysis of the vaccine antigens was approached as an alternative to the dye-binding methods, for improvement of the quality control. In particular, the Analytical Quality by Design principles were undertaken in optimizing the hydrolysis conditions of the antigens to be applied prior to the quantitation by UHPLC-UV. Bexsero was used as a case study; it is a recombinant meningococcal B vaccine and one of its critical quality attributes is the content of the three core protein antigens, namely Neisseria Heparin Binding Antigen, factor H binding protein and Neisseria adhesin A, in the final formulation. Conventionally, the proteins quantitation is carried out by dye-binding assays. Analytical Target Profile was defined as the accurate determination of amounts of the Bexsero antigens. The Critical Method Parameters were chosen by means of the cause-effect matrix. A Face Centered Design was used to select the experiments to investigate the process and finally a Method Operable Design Region with a risk of failure of 5% was defined. The selected working point for routine use was: hydrolysis time, 17 hrs; temperature, 112 °C; 6 M HCl volume, 300 µl; antioxidant 90% phenol volume, 5 µl.

Analysis of Volatile Hydrocarbons (Pentene Dimers and Terpenes) in Extra Virgin Olive Oil: Optimization by Response Surface Methodology and Validation of HS-SPME-GC-MS Method.

A head space-solid phase microextraction-gas chromatography-mass spectrometery (HS-SPME-GC-MS) method for the simultaneous analysis of pentene dimers from lipoxygenase (LOX) pathway, monoterpenes, and sesquiterpenes in extra virgin olive oil (EVOO) was proposed. A Doehlert design was performed; the conditions of the HS-SPME preconcentration step (extraction temperature, extraction time, sample amount, and desorption time) were optimized by response surface methodology, allowing defining the method operable design region. A quantitative method was set up using the multiple internal standard normalization approach: four internal standards were used, and the most suitable one was selected for area normalization of each external standard. The quantitative method was successfully validated and applied to a series of monocultivar EVOOs. This is the first paper in which a quantitative method using commercial standards has been proposed for the analysis of an important class of molecules of EVOO such as pentene dimers. The optimized method is suitable for routine analysis aimed at characterizing high quality EVOOs.

Innovative Reversed-Phase Chromatography Platform Approach for the Fast and Accurate Characterization of Membrane Vesicles' Protein Patterns.

Outer membrane vesicles (OMVs) have been widely explored to develop vaccine candidates for bacterial pathogens due to their ability to combine adjuvant properties with immunogenic activity. OMV expresses a variety of proteins and carbohydrate antigens on their surfaces. For this reason, there is an analytical need to thoroughly characterize the species expressed at their surface: we here present a simple and accurate reversed-phase ultrahigh-performance liquid chromatography (RP-UPLC) method developed according to quality by design principles. This work provides an analytical alternative to the classical sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) characterization. The higher selectivity and sensitivity of the RP-UHPLC assay allow for the identification of additional protein species with respect to SDS-PAGE and facilitate its precise relative abundance quantification. According to validation results, the assay showed high accuracy, linearity, precision, repeatability, and a limit of quantification of 1% for less abundant proteins. This performance paves the way for improved production campaign consistency while also being analytically simple (no sample pretreatment required), making it suitable for routine quality control testing. In addition, the applicability of the assay to a wider range of vesicle classes (GMMA) was demonstrated.

Application of quality by design to the development of analytical separation methods.

Recent pharmaceutical regulatory documents have stressed the critical importance of applying quality by design (QbD) principles for in-depth process understanding to ensure that product quality is built in by design. This article outlines the application of QbD concepts to the development of analytical separation methods, for example chromatography and capillary electrophoresis. QbD tools, for example risk assessment and design of experiments, enable enhanced quality to be integrated into the analytical method, enabling earlier understanding and identification of variables affecting method performance. A QbD guide is described, from identification of quality target product profile to definition of control strategy, emphasizing the main differences from the traditional quality by testing (QbT) approach. The different ways several authors have treated single QbD steps of method development are reviewed and compared. In a final section on outlook, attention is focused on general issues which have arisen from the surveyed literature, and on the need to change the researcher's mindset from the QbT to QbD approach as an important analytical trend for the near future.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e., octanol-water partition coefficient in the range -0.3 - 3.4). The novel thermally assisted on-line SPE approach was investigated in comparison to conventional room temperature desorption strategies based on the use of (i) an optimized elution gradient or (ii) organic desorption followed by post-cartridge dilution. The thermally assisted desorption strategy has been shown to be better performing and suitable for the development of a reliable and sensitive method for the analysis of the model group of analytes in urine and serum. In more detail, under the optimized experimental conditions, the proposed method provided negligible matrix effects in both biofluids for almost all target analytes. Moreover, method quantification limits were in the ranges 0.026-7.2 µg L-1 and 0.033-23 µg L-1 for urine and serum, respectively, i.e., comparable to or lower than those reported in methods previously published.

Millet Fermented by Different Combinations of Yeasts and Lactobacilli: Effects on Phenolic Composition, Starch, Mineral Content and Prebiotic Activity.

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: Saccharomyces boulardii (FPM1), Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius (FPM2) and Hanseniaspora uvarum plus Fructilactobacillus sanfranciscensis (FPM3). All the fermentation processes led to an increase in minerals. An increase was observed for calcium: 254 ppm in FPM1, 282 ppm in FPM2 and 156 ppm in the unfermented sample. Iron increased in FPM2 and FPM3 (approx. 100 ppm) with respect the unfermented sample (71 ppm). FPM2 and FPM3 resulted in richer total phenols (up to 2.74 mg/g) compared to the unfermented sample (2.24 mg/g). Depending on the microorganisms, it was possible to obtain different oligopeptides with a mass cut off ≤10 kDalton that was not detected in the unfermented sample. FPM2 showed the highest resistant starch content (9.83 g/100 g) and a prebiotic activity on Bifidobacterium breve B632, showing a significant growth at 48 h and 72 h compared to glucose (p < 0.05). Millet fermented with Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius can be proposed as a new food with improved nutritional properties to increase the quality of the diet of people who already use millet as a staple food.

Assessment of bioaccumulation of glyphosate and aminomethylphosphonic acid in marine mussels using capillary electrophoresis with light-emitting diode-induced fluorescence detection.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis). The method is based on the acidic hydrolysis of lyophilized tissue using 6 M HCl (oven at 110 °C for 22 h) to release the target analytes; their subsequent derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole, was found to be suitable for the sensitive fluorescence detection. To achieve optimum separation of the analytes from the matrix and degradation reagent interferences, the background electrolyte constituted by borate buffer (pH 9.2, 30 mM) was supplemented with 10 mM heptakis(2,6-di-O-methyl)-ß-cyclodextrin. The method was validated for linearity, precision, accuracy, robustness and sensitivity showing LOQ of 0.2 and 1.0 µg/g in fresh tissues, for AMPA and glyphosate, respectively; the recovery values ranged within 88.5 - 94.6% for glyphosate and 70.4 - 76.6% for AMPA. Experimental samples of Mediterranean mussels M. galloprovincialis treated with 100 µg/L or 500 µg/L of both glyphosate and AMPA, showed a dose dependent bioaccumulation of the compounds reaching maximum level of 77.0 µg/g and 11.3 µg/g of AMPA and glyphosate, respectively. The study demonstrates for the first time M. galloprovincialis as potential sentinel organisms for the environmental occurrence of these small amphoteric pollutants.

Quality by Design in optimizing the extraction of (poly)phenolic compounds from Vaccinium myrtillus berries.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices. Extraction time (Time, from 5 to 15 min), organic solvent type (OS type, methanol, ethanol and acetone), organic solvent percentage (OS%, from 50% to 90%), sample/extractant ratio (S/E ratio, from 0.025 to 0.1 g mL-1), and, only for MAE, extraction temperature (T, from 30 to 60°C), were selected as critical method parameters (CMPs). The spectrophotometric assays total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and radical scavenging activity (evaluated by the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH), the 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid), and the ferric reducing antioxidant power methods) were chosen as critical method attributes (CMAs). The screening procedure allowed for selecting UAE and methanol, while the other CMPs underwent further optimization through Response Surface Methodology. Target values for TSP, TMA and DPPH were selected and the method operable design region (MODR) was defined by means of Monte-Carlo simulations. The optimized conditions, with the corresponding MODR intervals in bracket, were the following: (i) Time, 17 min (15-23 min); OS%, 56% (44-59%); S/E ratio, 0.030 (0.022-0.034) g mL-1. Under these experimental conditions, CMAs values of the pooled sample were the following (n = 3): TSP=4433±176 mg (+)-catechin eq/100 g dry weight (d.w.); TMA=3575±194 mg cyanidin-3-glucoside eq/100 g d.w.; DPPH=273±5 µg DPPH inhib./mg d.w. The optimized extraction method was tested for matrix effect (ME%) in the UHPLC-MS/MS analysis of 15 anthocyanins and 20 non-anthocyanins individual (poly)phenols commonly found in bilberries, as well as for luteolin, sinapic acid, and pelargonidin-3-glucoside, absent in this fruit and therefore added to the extracts as surrogate standards for evaluating apparent recovery (AR%). |ME%| was in any case ≤ 23% and AR% of the surrogate standards in the range 91-95%, confirming the very good performances of the optimized extraction method.

Evaluation of the separation mechanism of electrokinetic chromatography with a microemulsion and cyclodextrins using NMR and molecular modeling.

Electrokinetic chromatography (EKC) allows the separation of closely related substances by the detection of fine effects in analyte-separation system interactions. With the goal of understanding the fine effects involved in separation using a dual cyclodextrin-microemulsion EKC system, an integrated study of NMR and molecular modeling was carried out. The above dual cyclodextrin-microemulsion system was previously used in the separation of clemastine and its related substances and was prepared by the addition of methyl-ß-cyclodextrin (MßCD) and heptakis(2,6-di-O-methyl)-ß-cyclodextrin (DMßCD) to an oil-in-water microemulsion. The use of DMßCD was shown to be essential in the separation of clemastine from one of its related substance (I(B) ). A molecular modeling study allowed the different affinities of clemastine and I(B) for the two cyclodextrins to be explained. Furthermore, rotating-frame Overhauser effect spectroscopy NMR experiments clearly indicated that besides the primary pseudostationary phase, namely the ionic microemulsion, cyclodextrins acted as a secondary pseudostationary phase. In addition, it was shown that inclusion complexation of sodium dodecyl sulfate (SDS) monomers into the cyclodextrins cavity occurs; differently, the oil (n-heptane) used in the preparation of microemulsion system resulted to be not included into the macrocycle cavity. These experimental results were supported by molecular modeling, which highlighted the preferential inclusion of SDS into DMßCD. On the basis of these results, it was confirmed that, besides its primary role as the ionic carrier in EKC, SDS is involved in inclusion equilibria toward CDs, which can be effective in increasing the system selectivity.

A simple and selective electrochemical magneto-assay for sea lice eDNA detection developed with a Quality by Design approach.

Environmental DNA (eDNA) is a novel, non-invasive sampling procedure that allows the obtaining of genetic material directly from environmental samples without any evidence of biological sources. The eDNA methodology can greatly benefit from coupling it to reliable, portable and cost-effective tools able to perform decentralized measurements directly at the site of need and in resource-limited settings. Herein, we report a simple method for the selective analysis of eDNA using a magneto-assay with electrochemical detection. The proposed method involves the polymerase chain-reaction (PCR) amplification of mitochondrial eDNA of parasitic Salmon lice (Lepeophtheirus salmonis), extracted from seawater samples. The eDNA sequence was targeted via sandwich hybridization onto magnetic beads and enzymatic labeling was performed to obtain an electroactive product measured by differential pulse voltammetry. Quality by Design (QbD), a recent concept of science- and risk-oriented quality paradigm, was used for the optimization of the different parameters of the assay. Response surface methodology and Monte Carlo simulations were performed to define the method operable design region. The optimized electrochemical magneto-assay attained a limit of detection of 2.9 amol µL-1 of the short synthetic sea louse DNA analogue (43 bp). In addition, robustness testing using a further experimental design approach was performed for monitoring eDNA amplicons. Seawater samples spiked with individuals of free-swimming L. salmonis copepodite stages and seawater collected from tanks with sea lice-infested fish were analyzed.