Effect of umbilical cord mesenchymal stem cell-derived mitochondrial transplantation on ischemia-reperfusion injury in a rat model.

BACKGROUND: Despite advancements in reconstructive procedures, ischemia-reperfusion (I/R) injury remains a significant challenge in reconstructive surgery, with mitochondrial dysfunction playing a pivotal role. Mitochondrial transplantation has emerged as a promising therapeutic strategy to address this issue. This study aims to evaluate the impact of umbilical cord mesenchymal stem cell-derived mitochondrial transplantation on skin flap I/R models in rats. MATERIAL AND METHODS: Twenty male rats underwent I/R injury on skin flaps, with or without mitochondrial transplantation administered via intravenous or subcutaneous routes. Analysis encompassed histopathology, inflammatory, apoptotic, oxidative stress, and hypoxia markers. RESULTS: Results revealed a reduction in inflammation, apoptosis, oxidative stress, and hypoxia in the transplantation group compared to controls. CONCLUSION: The findings suggest that umbilical cord mesenchymal stem cell-derived mitochondrial transplantation shows promise in enhancing flap viability and attenuating I/R injury, offering valuable insights for improved outcomes in reconstructive surgery. However, further exploration in larger animal models and refinement of delivery methods and dosage are warranted to fully elucidate its clinical translatability.

Aesthetic doctors' perception and attitudes toward tolerance in botulinum toxin.

BACKGROUND: Botulinum toxin is a crucial therapeutic tool with broad indications in both cosmetic and medical fields. However, the expanding cosmetic use and increased dosages of botulinum toxin have raised concerns about resistance, making it essential to study the awareness and management practices among healthcare professionals. METHODS: A survey was conducted among clinical physicians using botulinum toxin. The study investigated their experiences, awareness, and management practices related to toxin resistance. Real-time mobile app-based surveys were administered to clinicians attending the 45th International Academic Conference of the Korean Academy of Laser and Dermatology (KALDAT) on December 3, 2023. RESULTS: Among 3140 participants, 673 clinical physicians completed the survey. Of these, 363 clinicians (53.9%) reported experiencing botulinum toxin resistance. Regarding the resistance rate, 59.4% indicated less than 1%, 36% reported approximately 1%-25%, and 95.4% reported less than 25%. Efforts to prevent resistance included maintaining intervals of over 3 months (54.8%), using products with lower resistance potential (47.0%), employing minimal effective doses (28.2%), and minimizing re-administration (14.9%). CONCLUSION: In the South Korean aesthetic medicine community, a majority of clinical physician's report encountering botulinum toxin resistance. Given the potential loss of various benefits associated with resistance, there is a need to establish appropriate guidelines based on mechanistic studies and current status assessments. Educating clinicians on applicable guidelines is crucial.

Pushing the Boundaries of Multicomponent Alloy Nanostructures: Hybrid Approach of Liquid Phase Separation and Selective Leaching Processes.

ConspectusAlloying, or mixing of multiple metallic elements, is the classical way of novel materials development since the Bronze age. Increased numbers of principal elements expand the compositional space for alloy design vastly, leading to nearly endless possibilities of unexpected and unique materials properties. In contrast to bulk alloying processes represented by casting of molten metal mixtures, the fabrication of multicomponent alloy (MCA) nanostructures such as nanoparticles and nanofoams with more than three elements is often challenging, and a few methodologies for directly synthesizing alloy nanostructures up to denary systems have been suggested recently. However, forming alloy nanoparticles inside another metal matrix, instead of inside aqueous media in wet-chemical synthesis, is a fairly well understood strategy in terms of physical metallurgy. Extracting those alloy nanophases from the matrix could provide an alternative way to fabricate novel MCA nanostructures.In this Account, we describe a hybrid approach of metallurgical bottom-up and chemical top-down processes for fabricating MCA nanostructures including nanoparticles and nanofoams. The former utilizes a liquid-state phase separation process that resembles "oil and water" but occurs at the nanoscale due to thermodynamic mixing relations among alloying elements and a rapid quenching process. Thermodynamic prediction of the immiscible boundary in a temperature-composition space (miscibility gap) plays a key role in designing precursor alloys for MCA nanostructures. Selective leaching, the chemical top-down process for extracting the alloy nanostructures from the precursors, uses the chemical reactivity difference between the embedded nanostructures and the matrix phase against a certain chemical solution. We discuss here that the precise control of alloy composition and cooling rate based on thermodynamic assessments enables researchers to prepare phase-separating precursor alloys for fabricating both nanoparticles and nanofoams with a broad size range from a few nanometers to a few hundred nanometers. Depending on the alloy systems, the atomic structure of alloy nanostructures could be controlled from fully amorphous to nanocrystalline and even to quasicrystalline structure. We demonstrate how the different sizes of alloy nanostructures fabricated by a single hybrid procedure can be effectively exploited for investigating size-dependent physical properties. The future and potential research directions for this hybrid approach are also briefly discussed. This unique approach for fabricating nanosized alloys provides an extended methodology to discover novel metallic nanomaterials with promising properties in diverse compositional spaces of MCA systems.

Overlapping Intravelar Veloplasty Improves the Speech Outcomes in Submucous Cleft Palate.

BACKGROUND: Submucous cleft palate (SMCP) is a subgroup of cleft palate that can present as velopharyngeal insufficiency due to muscle displacement. The pharyngeal flap and Furlow palatoplasty have been introduced to correct SMCP patient with velopharyngeal insufficiency. However, pharyngeal flap and Furlow palatoplasty can occur various complications. We consider the overlapping intravelar veloplasty (IVVP) can overcome these complications. Therefore, we present the speech outcomes of overlapping IVVP for the treatment of patients with SMCP. METHODS: We retrospectively reviewed 12 patients with SMCP underwent overlapping IVVP between April 2016 and October 2018. The patients who underwent speech evaluation, nasometry, and nasoendoscopy before and after surgery and who were followed up for >18 months were enrolled in this study. RESULTS: The average age of the patients was 5 years (range, 3-11 years) and the postoperative follow-up period ranged from 18 to 24 months (mean, 20 months). The preoperative perceptual speech evaluation was moderate and the postoperative evaluation was normal ( P < 0.01). The preoperative and postoperative nasalance scores obtained using a nasometer were 37.00 and 12.50, respectively, ( P < 0.01). Preoperative and postoperative velopharyngeal movements were grades 3 and 0, respectively, ( P < 0.01). CONCLUSIONS: Our study showed that overlapping IVVP could provide successful correction of velopharyngeal insufficiency in patients with SMCP, including relatively old patients.

Comparative Analysis of Sterile Freeze-Dried Versus Sterile Pre-Hydration Acellular Dermal Matrix in Implant-Based Breast Reconstruction.

INTRODUCTION: Implant-based breast reconstruction currently represents the most popular form of breast reconstruction. Acellular dermal matrix (ADM) is a biological scaffold which is used for inferolateral implant coverage in implant-based breast reconstruction. There are two types in the way when using ADM, freeze-dried type and pre-hydrated type. In this study, we focused on complication and aesthetic outcome resulting from freeze-dried type or pre-hydrated type. PATIENTS AND METHOD: Through retrospective chart review, we analysed 78 patients (using 26 freeze-dried type, 52 pre-hydrated type, MegaDerm; L&C BIO, Seongnam, Korea) from January 2016 to February 2019. Complications such as skin inflammation, wound dehiscence, skin necrosis, infection, nipple-areolar necrosis were assessed with medical chart review with post-operative photographic findings by two independent assessors. Drainage amount of operative site and retention period of drainage was checked. Assessment for aesthetic outcome categorized into five parts, shape, volume, symmetry, nipple-areolar complex and scar. Two independent assessors undertook visual analogue scale of 1 (very dissatisfied) to 5(very satisfied) at 1 year after the surgery. And the symmetry of breast was evaluated subjectively by the patient for the same scale. If the implant was removed, aesthetic outcome assessment has not been implemented. RESULTS: In aesthetic assessment, the category of shape assessed by clinician and symmetry assessed by patient showed higher in pre-hydrated type group with significant differences. In the pre-hydrated type group, the other aesthetic outcomes including the categories of shape, size, symmetry and texture were not statistically significant, but higher. In complication, the result showed no significant difference between the two groups. In addition, there was no difference in the amount of drainage. CONCLUSIONS: Pre-hydrated type ADM is designed to be softer than freeze-dried type. We could predict pre-hydrated type would provide better texture of breast. Indeed, in this study, the shape showed better in pre-hydrated group, which was related to the nature of texture. Also, it also showed better results in the volume, symmetry, nipple-areolar complex and scar and may be related to skin thickness or remaining soft tissue after mastectomy procedure. In future studies, it should be conducted with consideration of post-mastectomy factors. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Improvement in linear depressed atrophic scar using 755-nm picosecond alexandrite laser vs. ablative fractional carbon dioxide laser.

ABBREVIATIONS: AFL = ablative fractional laser, CO2= carbon dioxide, LiOB = laser-induced optical breakdown, PIH = postinflammatory hyperpigmentation, mVSS = Modified Vancouver scar scale.

Effectiveness of Absorbable Plates for the Treatment of Nasal Septal Cartilage Fractures.

BACKGROUND: Nasal bone fractures are the most common type of facial fracture. Nasal bone fractures often occur in combination with septal cartilage fractures, because the nasal septal cartilage acts as a vertical strut and provides structural support for the nose and bilateral nasal airway. However, the treatment for nasal septal cartilage fracture remains controversial, and if untreated, nasal septal cartilage fracture can lead to various complications, such as nasal obstruction and posttraumatic nasal and septal deformity. This study aimed to evaluate the effectiveness and safety of our procedure in which septal cartilage fractures were treated with septoplasty using an absorbable plate as an internal splint. METHODS: Between January 2017 and November 2020, 21 patients with nasal septal cartilage fractures were treated with septoplasty using an absorbable plate as an internal splint. The severity of the septal cartilage fracture was graded from 0 to 3 according to the computed tomography septal grading system. The numeric graded scale of nasal septal cartilage fracture was evaluated preoperatively and 6 months postoperatively using a computed tomography scan. RESULTS: Of 21 patients with septal cartilage fractures, 12 were treated with a polycaprolactone (PCL) mesh plate, and 9 were treated with a polydioxanone (PDS) plate. In the PDS plate group, the preoperative numeric scale of nasal septal cartilage fracture was 2.50 (2.00-3.00), whereas the postoperative numeric scale was 1.00 (1.00-1.25, P = 0.023). In the PCL mesh plate group, the preoperative numeric scale of nasal septal cartilage fracture was 2.00 (2.00-3.00), whereas the postoperative numeric scale was 1.00 (1.00-1.50, P = 0.034). The effectiveness of the PCL mesh plate and that of the PDS plate group according to the septal grading scale were 1.45 (SD, 0.522) and 1.18 (SD, 0.603), respectively. However, these differences were not statistically significant. CONCLUSIONS: Our study shows that septoplasty using absorbable plates provides satisfactory and safe clinical outcomes in patients with nasal septal cartilage fractures.

Speech Outcomes of Treatment for Velopharyngeal Insufficiency: Combined Use of an Overlapping Intravelar Veloplasty and Dynamic Sphincter Pharyngoplasty.

BACKGROUND: Velopharyngeal insufficiency involving a large velopharyngeal gap and poor lateral wall movement is referred to as a "black hole" and remains a challenging problem for cleft surgeons. The effect of the pharyngeal flap on this form of velopharyngeal insufficiency is still debatable because a wide pharyngeal flap is associated with a high incidence of airway obstruction. The present study aimed to evaluate the speech outcomes of combined overlapping intravelar veloplasty and dynamic sphincter pharyngoplasty for the treatment of velopharyngeal insufficiency. METHODS: Between March 2016 and June 2019, 15 patients with velopharyngeal insufficiency were treated with a combination of overlapping intravelar veloplasty and dynamic sphincter pharyngoplasty. Preoperative speech evaluation was performed on the basis of perceptual speech evaluation, nasometry, and nasoendoscopy. Postoperative speech evaluation using the same approach as that used preoperatively was performed after completion of speech therapy. RESULTS: All 15 patients achieved satisfactory velopharyngeal port closure and speech phonation after completion of speech therapy. No additional procedures were performed to improve velopharyngeal port closure and speech production. The preoperative and postoperative results of perceptual speech evaluation, nasometry, and nasoendoscopy evaluation were significantly different (P < 0.01). CONCLUSION: Combined treatment with overlapping intravelar veloplasty and dynamic sphincter pharyngoplasty can correct the velopharyngeal insufficiency "black hole" with highly reliable results and minimal risk of airway obstruction.

Medial Epicanthoplasty With the Classic and Modified Skin Redraping Method: A Retrospective Case Control Study.

ABSTRACT: The skin redraping method for medial epicanthoplasty is characterized by some shortcomings which warrants modification. In this study, clinical data of 193 patients who underwent medial epichanthoplasty by the modified skin redraping technique or the classic skin redraping technique were reviewed retrospectively. The patients underwent operation between May 2018 and June 2020 and were followed up for not less than 6 months. Interepicanthal distance, interpupillary distance, patient satisfaction, and postoperative complications were evaluated. In terms of interepicanthal distance/inter-pupillary distance ratio ( P > 0.05) and satisfaction score ( P = 0.759), the modified skin redraping technique and the classic skin redraping technique were similar. In the classic skin redraping group, there were 3 cases of visible scarring in the lower eyelid, corresponding to significantly more cases than in the modified skin redraping group (n = 0, P < 0.001). There were more out-fold cases in the modified skin redraping group (76/90) than in the classic skin redraping group (17/88) ( P < 0.001). Utilizing the modified skin redraping medial epicanthoplasty can prevent medial hooding of the upper eyelid, reduce the probability of visible scarring, and produce more out-fold with concurrent double eyelidplasty compared with classic skin redraping epicanthoplasty. Level of evidence: IV.

Development of a Multi-Layer Marking Toolkit for Layout-Printing Automation at Construction Sites.

In this study, the development of a multi-layer marking toolkit was investigated to improve construction quality and mitigate the problem of irregular designs in the layout-printing work performed at construction sites. The quality of conventional layout-printing work is dependent on the skill of the worker, and construction quality can suffer owing to inconsistencies in drawings resulting from human error. In this study, these problems were analyzed, and a construction-site-layout-marking toolkit apparatus and mechanical unit, with a structure that allowed for multi-layer installation for automated implementation at construction sites, were developed. The marking toolkit and mechanical unit with the multi-layer structure were developed in a modular form so that each module can operate independently. Furthermore, each module was developed in manual mode to improve the system by acquiring information on the movement of the marking toolkit and multi-layer structure. Additionally, data on the layout-printing method was developed by connecting the system via Ethernet and operating a wireless joystick. Finally, experiments were performed on a road surface covered with B4 paper and concrete panels to confirm the operational feasibility of the system, which was developed to operate manually.

Comparison of Effectiveness and Safety of a Botulinum Toxin Monotherapy and a Combination Therapy with Hyaluronic Acid Filler for Improving Glabellar Frown.

BACKGROUND: Among numerous cosmetic procedures for face rejuvenation performed all over the world, botulinum toxin type A (BoNT-A) for wrinkles is one of the most widely practiced procedures. However, for severe frowns, the application of botulinum toxin is often insufficient. In this study, the effects of hyaluronic acid filler combination therapy and the BoNT-A alone were evaluated. METHODS: Forty subjects with 2 or higher points (moderate to severe) of a facial wrinkle scale (FWS) when frowning in the glabellar area were assigned to 2 group: Botulinum toxin type A monotherapy group and a combination regimen of the toxin and hyaluronic acid filler group. Subjects visited outpatient department every 4 weeks until 28 weeks after the injection, and the assessment of the efficacy using FWS, subject satisfaction at both resting and maximum frowning and safety analysis were performed. RESULTS: Subjects of both group was administered 18U of BoNT-A and the subjects of the combination group received additional 0.45mL of hyaluronic acid filler regimen. Both at rest and maximum frown, the combination group scored lower FWS than the toxin and showed significance in the week-20 and week-28. And at final visit, subject satisfaction score of the combination was higher than that of toxin group. CONCLUSION: For patients with moderate to severe glabellar frown, the combined administration of BoNT-A and hyaluronic acid filler could be a considerable treatment for improving wrinkles. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Nasal Reconstruction of a Frontonasal Dysplasia via Septal L-Strut Reconstruction Using Costal Cartilage.

OBJECTIVE: Frontonasal dysplasia (FND) is a rare congenital condition. Its major features include hypertelorism, a large and bifid nasal tip, and a broad nasal root. We present our technique of septal L-strut reconstruction using costal cartilage. DESIGN: Retrospective review from June 2008 and August 2017. METHODS: Under general anesthesia, 6 patients with FND underwent septal reconstruction using costal cartilage via open rhinoplasty. We reconstructed the nasal and septal cartilaginous framework by placing columellar struts and cantilever-type grafts. RESULTS: The patients ranged in age from 6 to 13 years old. All were female. The follow-up period ranged from 8 months to 2 years; we encountered no postoperative complications (infection, nasal obstruction, or recurrence). All patients were satisfied with their nasal appearance. CONCLUSIONS: Although the results were not entirely satisfactory from an esthetic point of view, we found that FND can be treated via septal reconstruction with costal cartilage and that the clinical outcomes are reliable and satisfactory. Our approach is a useful option for FND patients.

Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility.

Metallic alloys containing multiple principal alloying elements have created a growing interest in exploring the property limits of metals and understanding the underlying physical mechanisms. Refractory high-entropy alloys have drawn particular attention due to their high melting points and excellent softening resistance, which are the two key requirements for high-temperature applications. Their compositional space is immense even after considering cost and recyclability restrictions, providing abundant design opportunities. However, refractory high-entropy alloys often exhibit apparent brittleness and oxidation susceptibility, which remain important challenges for their processing and application. Here, utilizing natural-mixing characteristics among refractory elements, we designed a Ti38V15Nb23Hf24 refractory high-entropy alloy that exhibits >20% tensile ductility in the as-cast state, and physicochemical stability at high temperatures. Exploring the underlying deformation mechanisms across multiple length scales, we observe that a rare ß'-phase plays an intriguing role in the mechanical response of this alloy. These results reveal the effectiveness of natural-mixing tendencies in expediting high-entropy alloy discovery.

A Validated Grading Scale for Downturned Oral Commisure in Asian Faces.

BACKGROUND: Downturned oral commissures develop gradually with aging. Tools have been developed to evaluate the marionette line or the lower face. However, there is no validated and reproducible tool to evaluate the progress after oral commissure treatment in clinical practice. OBJECTIVE: The authors aimed to develop a scoring system to evaluate therapeutic interventions for downturned oral commissures and to verify its reliability, reproducibility, and clinical significance. METHODS AND MATERIALS: In the Scale Development Group, the Delphi method was used to establish a 5-graded scoring system to evaluate oral commissure position. The scoring system was applied to 50 participants. The authors recorded and compared the intrarater agreement, interrater agreement, and significance of the grade-dependent scale. RESULTS: Delphi analysis of the scoring system verified the grade description adequacy. Intrarater agreement showed almost perfect agreement, and the intraclass correlation coefficient of the interrater agreement had a significantly higher agreement rate. The differences between the clinical grades were significant. CONCLUSION: The Hugel Downturned Oral Commissure Scale is precise, reproducible, and reflective of the clinical differences for downturned oral commissure. Its novelty lies in the use of specific angles and ratio. This scale has clinical trial potential owing to its standardized and quantitative assessment.

Aesthetic Nasal Lobule Correction Using a Three-Dimensional Printed Polycaprolactone Implant.

ABSTRACT: Nasal tip plasty is a surgery that determines important rhinoplasty outcomes. A variety of autologous and alloplastic implants are utilized in this procedure, including 1 synthetic material known as polycaprolactone (PCL). This study provides background on the ready-made three-dimensional printed PCL implant for nasal lobule correction, before discussing the usefulness and effectiveness of the implant. A total of 23 patients who visited our hospital between January 2018 and January 2020 were evaluated in this study. We used 3 types of PCL implant to get an ideal shape for the nasal tip: tipball (globular shape), droneball (rugby ball shape), and dumbbell (dumbbell shape). The authors compared nasolabial angle and tip projection at the preoperative and postoperative period via photographic anthropometric analysis. In 4 patients, we also examined the dead space between the implant and soft tissue via ultrasonography. The follow-up period averaged 9.5 months and no serious complications were found after surgery. The nasolabial angle and tip projection had an average postoperative increase of 6.4° and 0.044, respectively. Ultrasonography revealed the attachment of the implant at the insertion site and no dead space was found. This is the first attempt to apply a ready-made three-dimensional printed PCL implant to a nasal lobule correction procedure. As the implant was easy to use and showed good results, it may be useful for aesthetic purposes in future nasal tip plasty procedures.

The Effectiveness of Early Combined CO2 Ablative Fractional Laser and 595-nm Pulsed Dye Laser Treatment After Scar Revision.

ABSTRACT: Scars are significant complications of wound healing and associated with negative physical, psychological, and cosmetic effects. Scar revision and laser treatment have been used over the past century to improve many different types of scars. Here, we evaluated the effectiveness of early combined carbon dioxide ablative fractional laser (AFL) and pulsed dye laser (PDL) treatment after scar revision. Fourteen patients who underwent scar revision were enrolled. All patients were treated with both a 10,600-nm AFL and a 595-nm PDL commencing 2 weeks after scar revision and continuing at 4-week intervals for a total of 4 treatments. Vancouver Scar Scale scores were evaluated before treatment and 5 months after the final treatment. All Vancouver Scar Scale scores improved significantly except that of scar height. We encountered no adverse complications (wound disruption, or hyper- or hypopigmentation) during follow-up. Early combined carbon dioxide AFL and PDL treatment after scar revision effectively and safely minimized scar formation.

The Effects of Alar Base Augmentation in Secondary Unilateral Cleft Lip Nasal Deformity.

ABSTRACT: In unilateral cleft lip and palate patients, the alar base is displaced inferoposterolaterally due to the depression of the pyriform aperture in the cleft side, and the drooping of the nostril rim is provoked by displacement of the alar base. This study was conducted between May 1998 and December 2012. In total, 82 patients with secondary unilateral cleft lip nasal deformities were treated using alar base augmentation. The patients were divided into two groups according to the degree of their preoperative alar base asymmetry. Patients with alar base asymmetry <3 mm were treated with a soft tissue augmentation procedure. Those with alar base asymmetry >3 and <6 mm were treated with a bony augmentation procedure. Soft tissue augmentation was conducted in 42 patients, and bony augmentation was conducted in 40 patients. In the soft tissue augmentation group, the degree of alar base asymmetry was improved from 2.42 ±â€Š0.38 mm preoperatively to 0.45 ±â€Š0.21 mm postoperatively (P  < 0.05). In the bony augmentation group, the degree of alar base asymmetry was improved from 4.33 ±â€Š0.50 mm preoperatively to 0.81 ±â€Š0.20 mm postoperatively (P  < 0.05). In the amount of alar base augmentation, there were statistically significant differences between the soft tissue augmentation group and the bony augmentation group (P  < 0.05). This clinical study shows that secondary cleft lip nasal deformities can be corrected with alar base augmentation using soft tissue and bony augmentation and that these procedures can provide reliable, satisfactory, and safe clinical outcomes.

Calcaneal fracture: results of earlier rehabilitation after open reduction and internal fixation.

INTRODUCTION: This study aimed to analyze the clinical and radiological outcomes of early weight-bearing and rehabilitation after open reduction and internal fixation (OR/IF) of calcaneal fracture. MATERIALS AND METHODS: This retrospective study was conducted on 78 patients with unilateral calcaneal fracture who underwent OR/IF. A mean follow-up period was 45.8 months (range 12-135). Two weeks after surgery, the range of motion (ROM) exercise was started, brace or heel off shoe was applied, and forefoot weight-bearing was allowed. Four weeks after surgery, tolerable weight-bearing ambulation without crutch was allowed. When the patient was not walking, the braces were removed to perform peritalar ROM exercises. Radiologic evaluation was performed by measuring the Böhler angle and incongruency of the subtalar joint surface. Paley grade was used to assess traumatic arthritis. Clinical evaluation was performed by measuring the foot and ankle outcome score (FAOS) and ankle ROM. RESULTS: The mean postoperative Böhler angle was 31.7° (P < 0.001) at 2 weeks, 31.2° at 3 months, and 30.1° at the last (P = 0.4). The average Paley grade of the subtalar OA was 1.12. CT imaging revealed that the average step-off of the subtalar joint was 1.26 mm in coronal and 0.84 mm in sagittal. The average ROM results were as follows (contralateral, affected side): there was no significant difference in dorsiflexion [16.9° vs. 16° (P = 0.6)], whereas plantarflexion and inversion were significantly decreased [39.5° vs. 35.3° (P = 0.049) and 50.5° vs. 34.8° (P = 0.04)]. The average FAOS score was 86.1 points, and the highest score was "function" (mean 92.5 points). CONCLUSIONS: Earlier rehabilitation after OR/IF is recommended for the treatment of calcaneal fracture.

Volumetric Evaluation of Dead Space in Ischial Pressure Injuries Using Magnetic Resonance Imaging: A Case Series.

OBJECTIVE: To establish a preoperative evaluation procedure by measuring the volume of dead space using MRI in patients with ischial pressure injuries. METHODS: Patients with spinal cord injury and ischial pressure injuries who underwent treatment between August 2016 and November 2019 were included in the study. Preoperative MRI scan was conducted on all patients. The volume estimation and three-dimensional (3D) reconstruction were performed based on MRI data using a 3D Slicer. Based on the resulting volume, a muscle flap that could fit the dead space was selected. Surgery was performed with the selected muscle flap, and a fasciocutaneous flap was added, if necessary. RESULTS: A total of eight patients with ischial pressure injuries were included in the study. The mean patient age was 59.0 ± 11.0 years. The mean body mass index was 26.62 ± 3.89 kg/m2. The mean volume of dead space was 104.75 ± 81.05 cm3. The gracilis muscle was the most selected muscle flap and was used in four patients. In five of eight cases, a fasciocutaneous flap was used as well. The mean follow-up period was 16 months, and by that point, none of the patients evinced complications that required surgery. CONCLUSIONS: To the authors' knowledge, this is the first report on volumetric evaluation of dead space in ischial pressure injuries. The authors believe that the 3D reconstruction process would enable adequate dead space obliteration in ischial pressure injuries. The authors propose that preoperative MRI scans in patients with ischial pressure injury should become an essential part of the process.

A comparative study of intraoral versus retromandibular approach in the management of subcondylar fracture.

BACKGROUND: The purpose of this study was to compare the outcomes and effectiveness between intraoral approach and retromandibular approach for treatment of subcondylar fracture of mandible. METHODS: Between March 2011 and October 2013, 24 patients with subcondylar fractures of the mandible were treated by a single surgeon with an intraoral approach using an angulated screwdriver (n = 14) or by another surgeon using a retromandibular approach (n = 10). The interincisal distance was measured 1 week (T0), 6 weeks (T1), 3 months (T2), and 6 months (T3) postoperatively. We also compare the average operation time and the cost of operation between the two groups. RESULTS: At 6 months postoperatively, all 24 patients achieved satisfactory ranges of temporomandibular joint movement, with an interincisal distance > 40 mm without deviation and with stable centric occlusion. The intraoral group had the median interincisal distance of 14 mm at T0, 38 mm at T1, 42.5 mm at T2, and 43 mm at T3, while the retromandibular group had that of 15, 29, 35, and 42.5 mm respectively. There was no statistically significant difference between the intraoral and the retromandibular group at T0 and T4. However, significant differences were noted T1 and T2 (p < 0.01). The differences of average operation time between the intraoral (81 min) and retromandibular group (45 min) were statistically significant (p < 0.01). The cost of an operation was 369.96 ± 8.14 (United States dollar [USD]) in intraoral group and was 345.48 ± 0.0 (USD) in retromandibular group. The differences between the two groups were statistically significant (p < 0.01). CONCLUSION: In open reduction of a subcondylar fracture of the mandible, a intraoral approach using an angulated screwdriver is superior to the retromandibular approach in terms of interincisal distance, although the operation time is longer.