RESUMO
Perovskite solar cells with an inverted architecture provide a key pathway for commercializing this emerging photovoltaic technology because of the better power conversion efficiency and operational stability compared with the normal device structure. Specifically, power conversion efficiencies of the inverted perovskite solar cells have exceeded 25% owing to the development of improved self-assembled molecules1-5 and passivation strategies6-8. However, poor wettability and agglomeration of self-assembled molecules9-12 cause interfacial losses, impeding further improvement in the power conversion efficiency and stability. Here we report a molecular hybrid at the buried interface in inverted perovskite solar cells that co-assembled the popular self-assembled molecule [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) with the multiple aromatic carboxylic acid 4,4',4â³-nitrilotribenzoic acid (NA) to improve the heterojunction interface. The molecular hybrid of Me-4PACz with NA could substantially improve the interfacial characteristics. The resulting inverted perovskite solar cells demonstrated a record certified steady-state efficiency of 26.54%. Crucially, this strategy aligns seamlessly with large-scale manufacturing, achieving one of the highest certified power conversion efficiencies for inverted mini-modules at 22.74% (aperture area 11.1 cm2). Our device also maintained 96.1% of its initial power conversion efficiency after more than 2,400 h of 1-sun operation in ambient air.
RESUMO
Halide perovskite-based resistive switching memory (memristor) has potential in an artificial synapse. However, an abrupt switch behavior observed for a formamidinium lead triiodide (FAPbI3)-based memristor is undesirable for an artificial synapse. Here, we report on the δ-FAPbI3/atomic-layer-deposited (ALD)-SnO2 bilayer memristor for gradual analogue resistive switching. In comparison to a single-layer δ-FAPbI3 memristor, the heterojunction δ-FAPbI3/ALD-SnO2 bilayer effectively reduces the current level in the high-resistance state. The analog resistive switching characteristics of δ-FAPbI3/ALD-SnO2 demonstrate exceptional linearity and potentiation/depression performance, resembling an artificial synapse for neuromorphic computing. The nonlinearity of long-term potentiation and long-term depression is notably decreased from 12.26 to 0.60 and from -8.79 to -3.47, respectively. Moreover, the δ-FAPbI3/ALD-SnO2 bilayer achieves a recognition rate of ≤94.04% based on the modified National Institute of Standards and Technology database (MNIST), establishing its potential in an efficient artificial synapse.
RESUMO
Marine organisms, such as sea urchins like Heliocidaris crassispina, produce bioactive substances with antimicrobial activity to protect themselves from the high density of microorganisms in their habitats. One such substance, Echinochrome A (Ech A), has been isolated from various sea urchins' shells and spines using strong acidic solutions and organic solvents. Ech A, however, has not been reported from the coelomic fluid of H. crassispina. In this study, we report the antimicrobial activity of H. crassispina coelomic fluid extract against various microbes, evaluating its potential for purifying potent antimicrobial materials. Upon confirming the extract as a promising source of antimicrobial materials, we isolated antimicrobial compounds from the extract. A series of HPLC steps were taken to purify antimicrobial materials from the H. crassispina coelomic fluid extract, resulting in the isolation of two single absorbance peaks showing antimicrobial activity against Staphylococcus aureus. One peak consisted of a single antimicrobial compound with a molecular weight (MW) corresponding to Ech A, while the other peak comprised five MWs inferred to be those of Ech A and its oxidative products. The elution of Ech A in two separate peaks may be attributable to the presence of Ech A's isomer, as reported in several previous studies. The use of the environmentally friendly extraction method in procurement of Ech A from the coelomic fluid would contribute to the implementation of risk-reducing extraction method for researchers studying Ech A from sea urchins.
Assuntos
Staphylococcus aureus , Animais , Staphylococcus aureus/efeitos dos fármacos , Anthocidaris/química , Anti-Infecciosos/farmacologia , Anti-Infecciosos/química , Ouriços-do-Mar/química , Cromatografia Líquida de Alta Pressão , Antibacterianos/farmacologia , Antibacterianos/química , NaftoquinonasRESUMO
Organic-inorganic perovskite materials have gradually progressed from single-junction solar cells to tandem (double) or even multi-junction (triple-junction) solar cells as all-perovskite tandem solar cells (APTSCs). Perovskites have numerous advantages: (1) tunable optical bandgaps, (2) low-cost, e.g. via solution-processing, inexpensive precursors, and compatibility with many thin-film processing technologies, (3) scalability and lightweight, and (4) eco-friendliness related to low CO2 emission. However, APTSCs face challenges regarding stability caused by Sn2+ oxidation in narrow bandgap perovskites, low performance due to V oc deficit in the wide bandgap range, non-standardisation of charge recombination layers, and challenging thin-film deposition as each layer must be nearly perfectly homogenous. Here, we discuss the fundamentals of APTSCs and technological progress in constructing each layer of the all-perovskite stacks. Furthermore, the theoretical power conversion efficiency (PCE) limitation of APTSCs is discussed using simulations.
RESUMO
Neuropeptides are small molecules that mediate intercellular signaling and regulate physiological processes. Starfish possess various myoactive neuropeptides, including starfish myorelaxant peptide (SMP) and a calcitonin-type peptide with apical muscle relaxing properties. In this study, we report the purification of a neuropeptide from starfish (Patiria pectinifera) pyloric caeca extract using high-performance liquid chromatography (HPLC) and an in vitro bioassay to screen for fractions and peptides with relaxing effects on P. pectinifera apical muscle preparations. A series of HPLC steps using reversed-phase and cation-exchange columns yielded a purified peptide with muscle-relaxing effects. The purified peptide's structure was determined by LC-MS and Edman degradation, revealing a pentapeptide with an amidated C-terminus (NGFFYamide) and a molecular mass of 646.2930â¯Da. This is the first report of NGFFYamide purification from P. pectinifera through biochemical methods. The nucleotide sequence encoding the NGFFYamide precursor was determined, showing the presence of a conserved neurophysin domain in the C-terminal region. RT-qPCR results confirmed high expression in radial nerves cord, consistent with previous findings on NG peptides in echinoderms. In vitro pharmacological studies on muscle preparations from P. pectinifera and Asterias amurensis revealed differential relaxing activity of NGFFYamide on apical muscles, while its effects on tube foot preparations were similar in both species. NGFFYamide also induced potent contraction in P. pectinifera cardiac stomach. Comparison of three NG peptides (NGFFYamide, NGFFFamide, and NGIWYamide) on P. pectinifera cardiac stomach revealed varying potency, suggesting class-specific receptor interactions. Tachyphylaxis was observed in P. pectinifera apical muscle but not in A. amurensis, warranting further investigation. Based on these results, it is plausible that NGFFYamide could be involved in regulating locomotion and feeding behavior in P. pectinifera, consistent with findings in Asterias rubens.
RESUMO
It is critical to design bifunctional passivation molecules to simultaneously passivate the charge transport layer and perovskite layer at the charge transport layer/perovskite interface in perovskite solar cells (PSCs). In this study, we investigate the effect of para-substituted benzoic acid with different Hammett constants (σ) on the photovoltaic performance of PSCs. Two passivation molecules 4-aminomethylbenzoic acid (4-AMBA) and 4-sulfamoylbenzoic acid (4-SABA) are used to passivate the SnO2 surface with carboxylic acid and the perovskite with para-substituent electron-donating -CH2NH2 (σ = ca. -0.02) and electron-withdrawing -SO2NH2 (σ = ca. +0.60). Compared with non-passivated PSC, the passivation improves the power conversion efficiency (PCE) mainly due to the increased open-circuit voltage (VOC) and fill factor (FF), where the -SO2NH2 substituent is better in improving the photovoltaic performance than the -CH2NH2 one. The trap density is more reduced and the charge extraction ability is more improved by 4-SABA than by 4-AMBA, which indicates that the weak electron-withdrawing nature of a para-substituent such as -SO2NH2 is better for the passivation of the bottom perovskite than a weak electron-donating -CH2NH2 substituent. Consequently, the passivation with 4-SABA enhances the PCE from 22.27% to 23.64%, along with improved long-term stability. This work highlights for the first time the role of the Hammett constant in the surface passivation of PSCs.
RESUMO
The organic molecular 2,2',7,7'-tetrakis(4,4'-dimethoxy-3-methyldiphenylamino)-9,9'-spirobifluorene (Spiro-MeOTAD) is known as a typical hole transport material in the development of an all-solid-state perovskite solar cell (PSC). Spiro-MeOTAD requires additives of lithium bifurflimide (LiTFSI) and 4-tert-butylpyridine (tBP) to increase the conductivity and solubility for enhancing the photovoltaic performance of PSCs. However, those additives have an adverse effect on the thermal stability. We report on the origin of instability of additive-containing Spiro-MeOTAD at 85 °C and the methodology to solve the thermal instability. We have found that the interaction of LiTFSI with the underneath perovskite surface facilitated by diffusive tBP is responsible for thermal degradation. Degasification of tBP from the Spiro-MeOTAD film is found to be the key to achieving thermally stable PSCs, where the optimal degassing process achieves 90% of the initial power conversion efficiency (PCE) at 85 °C after 1000 h.
RESUMO
Metal halide perovskite solar cells (PSCs) are infamous for their batch-to-batch and lab-to-lab irreproducibility in terms of stability and performance. Reproducible fabrication of PSCs is a critical requirement for market viability and practical commercialization. PSC irreproducibility plagues all levels of the community; from institutional research laboratories, start-up companies, to large established corporations. In this work, the critical function of atmospheric humidity to regulate the crystallization and stabilization of formamidinium lead triiodide (FAPbI3) perovskites is unraveled. It is demonstrated that the humidity content during processing induces profound variations in perovskite stoichiometry, thermodynamic stability, and optoelectronic quality. Almost counterintuitively, it is shown that the presence of humidity is perhaps indispensable to reproduce phase-stable and efficient FAPbI3-based PSCs.
RESUMO
High-purity precursor materials are vital for high-efficiency perovskite solar cells (PSCs) to reduce defect density caused by impurities in perovskite. In this study, we present aqueous synthesized perovskite microcrystals as precursor materials for PSCs. Our approach enables kilogram-scale mass production and synthesizes formamidinium lead iodide (FAPbI3) microcrystals with up to 99.996% purity, with an average value of 99.994 ± 0.0015%, from inexpensive, low-purity raw materials. The reduction in calcium ions, which made up the largest impurity in the aqueous solution, led to the greatest reduction in carrier trap states, and its deliberate introduction was shown to decrease device performance. With these purified precursors, we achieved a power conversion efficiency (PCE) of 25.6% (25.3% certified) in inverted PSCs and retained 94% of the initial PCE after 1000 hours of continuous simulated solar illumination at 50°C.