Mechanodegradation of Polymers: A Limiting Factor of Mechanochemical Activation in the Production of Amorphous Solid Dispersions by Cryomilling.

In this study, we report on the influence of mechanochemical activation on the chemical stability of amorphous solid dispersions made up of indomethacin and hydroxypropyl methyl cellulose (HPMC), poly(vinylpyrrolidone) (PVP), poly(vinylpyrrolidone vinylacetate) (PVPVA), or Soluplus. In agreement with our recently published work, all applied carriers were found to be prone to polymer degradation. Covalent bonds within the polymers were cleaved and mechanoradicals were generated. Furthermore, decomposition of indomethacin was also observed but occurred only in the presence of polymers. Hence, it is proposed that the generated mechanoradicals from the polymers are responsible for the chemical degradation of indomethacin. Our study also strongly suggests the existence of a critical polymer- and process-dependent molecular weight limit "M∞", below which only limited mechanodegradation takes place since the lower-molecular-weight polymer PVP K12PF had a less profound influence on the degradation of indomethacin in comparison to PVP K25.

Preparation of Amorphous Solid Dispersions by Cryomilling: Chemical and Physical Concerns Related to Active Pharmaceutical Ingredients and Carriers.

In this work, a chemical (and physical) evaluation of cryogenic milling to manufacture amorphous solid dispersions (ASDs) is provided to support novel mechanistic insights in the cryomilling process. Cryogenic milling devices are considered as reactors in which both physical transitions (reduction in crystallite size, polymorphic transformations, accumulation of crystallite defects, and partial or complete amorphization) and chemical reactions (chemical decomposition, etc.) can be mechanically triggered. In-depth characterization of active pharmaceutical ingredient (API) (content determination) and polymer (viscosity, molecular weight, dynamic vapor sorption, Fourier transform infrared spectroscopy, dynamic light scattering, and ANS and thioflavin T staining) chemical decomposition demonstrated APIs to be more prone to chemical degradation in case of presence of a polymer. A significant reduction of the polymer chain length was observed and in case of BSA denaturation/aggregation. Hence, mechanochemical activation process(es) for amorphization and ASD manufacturing cannot be regarded as a mild technique, as generally put forward, and one needs to be aware of chemical degradation of both APIs and polymers.

The influence of crushing amorphous solid dispersion dosage forms on the in-vitro dissolution kinetics.

Solid dosage forms of amorphous solid dispersions (ASDs) have rarely been assessed for their crushability, although it might possibly be a more frequent practice than thought to facilitate oral administration in several clinical conditions (e.g. dysphagia) when no oral liquids of the same drug are available. Nevertheless, there are concerns that contraindicate these formulations' modification by grinding. For example, amorphous-amorphous phase separation, induction of crystallization, decreasing particle sizes, etc. might occur during grinding without knowing the implications on bioavailability. Hence, in this study, Sporanox® (itraconazole), Intelence® (etravirine), Noxafil® (posaconazole) and Norvir® (ritonavir), were selected as "model" enabling formulations (based on ASD) to evaluate if this concern was justified. Their assessment in simple and biorelevant media by two-stage in-vitro drug-release testing was performed which resulted in strong suspicion that pulverization is contradicted for some of these formulations. Despite differences were observed, uncertainty remains on the clinical relevance of these data as by golden standard it should still be confirmed by bioequivalence trials.

Solid-state analysis of amorphous solid dispersions: Why DSC and XRPD may not be regarded as stand-alone techniques.

Amorphous solid dispersions (ASDs) are single-phase amorphous systems, where drug molecules are molecularly dispersed (dissolved) in a polymer matrix. The molecular dispersion of the drug molecules is responsible for their improved dissolution properties. Unambiguously establishing the phase behavior of the ASDs is of utmost importance. In this paper, we focused on the complementary nature of (modulated) differential scanning calorimetry ((m)DSC) and X-ray powder diffraction (XRPD) to elucidate the phase behavior of ASDs as demonstrated by a critical discussion of practical real-life examples observed in our research group. The ASDs were manufactured by either applying a solvent-based technique (spray drying), a heat-based technique (hot melt extrusion) or mechanochemical activation (cryo-milling). The encountered limiting factors of XRPD were the lack of sensitivity for small traces of crystallinity, the impossibility to differentiate between distinct amorphous phases and its impossibility to detect nanocrystals in a polymer matrix. In addition, the limiting factors of (m)DSC were defined as the well-described heat-induced sample alteration upon heating, the interfering of residual solvent evaporation with other thermal events and the coinciding of enthalpy recovery with melting events. In all of these cases, the application of a single analytical technique would have led to erroneous conclusions, whilst the combination of (m)DSC and XRPD elucidated the true phases of the ASD.

Drug-carrier binding and enzymatic carrier digestion in amorphous solid dispersions containing proteins as carrier.

In order to further explain the ability of gelatin 50PS and bovine serum albumin (BSA) to generate supersaturation of a series of poorly soluble drugs (carbamazepine, cinnarizine, diazepam, itraconazole, nifedipine, indomethacin, darunavir (ethanolate), ritonavir, fenofibrate, griseofulvin, ketoconazole, naproxen, phenylbutazone and phenytoin), drug-polymer binding was investigated using solution NMR and equilibrium dialysis experiments. Binding characteristics of the biopolymers were compared to those of PVP, PVPVA and HPMC. Since both biopolymers are prone to enzymatic digestion, we evaluated the influence of proteolytic enzymes like pepsin and pancreatin on the dissolution properties of poorly soluble compounds when formulated as amorphous solid dispersions with gelatin 50PS and BSA. Evidence is being presented that supports the importance of drug-polymer binding in inducing and stabilizing supersaturation of poorly soluble drugs and enhancing dissolution from ASDs. In fact, BSA displayed drug binding with nearly all tested model drugs while in case of gelatin 50PS binding was observed for 5 out of 12 drugs. Addition of pepsin or pancreatin during dissolution of the biopolymer-containing ASDs leads to a drop in the concentration of the drug pointing to enzymatic digestion of the gelatin and BSA. However, after digestion, these formulations still outperformed their crystalline counterparts.

Exploring the feasibility of the use of biopolymers as a carrier in the formulation of amorphous solid dispersions - Part I: Gelatin.

Biopolymers have rarely been used so far as carriers in the formulation of amorphous solid dispersions (ASD) to overcome poor solubility of active pharmaceutical ingredients (APIs). In an attempt to enlarge our knowledge on this topic, gelatin, type 50PS was selected. A screening study was initiated in which twelve structurally different poorly soluble biopharmaceutical classification system (BCS) Class II drugs (carbamazepine, cinnarizine, diazepam, itraconazole, nifedipine, indomethacin, darunavir (ethanolate), ritonavir, fenofibrate, griseofulvin, ketoconazole and naproxen) were selected for evaluation. Solid dispersions of five different drug loadings of these twelve compounds were prepared by lyophilization and evaluated for their solid state properties by mDSC and XR(P)D, and in vitro dissolution performance. Even without any process optimization it was possible to form either fully amorphous or partially amorphous systems, depending on the API and API to carrier ratio. Hence in this respect, gelatin 50PS behaves as any other carrier. Dissolution of the API from the solid dispersions significantly exceeded that of their crystalline counterparts. This study shows the potential of gelatin as a carrier to formulate amorphous solid dispersions.

Ability of gelatin and BSA to stabilize the supersaturated state of poorly soluble drugs.

Gelatin and bovine serum albumin (BSA), two readily available biopolymers, were examined for their effect on solubility and supersaturation of drugs because of their capacity to interact with drugs (e.g. via hydrogen bonding, van der Waals or electrostatic interactions, etc.). Carbamazepine, cinnarizine, diazepam, itraconazole, nifedipine, indomethacin, darunavir (ethanolate), ritonavir, fenofibrate, griseofulvin, ketoconazole and naproxen were selected accordingly as twelve structurally different model BCS Class II drugs. All selected drugs were evaluated for solubility and supersaturation in presence and absence of these two biopolymers in four media (purified water, FaSSIF, FaSSGF and FeSSIF) by means of the shake flask method for 48 h and solvent shift induced supersaturation, respectively. In ca. 75% of the supersaturation experiments with these two biopolymers, drug concentrations significantly different delete from solubility were observed with supersaturation factors (SF) varying between 1.28 and 7.89 (p ≤ 0.05) and between 1.16 and 20.51 (p ≤ 0.01). In order to make an estimation on the relevance of these results, a comparison with three commonly used (semi-) synthetic polymers (HPMC, PVP and PVPVA) was included in purified water. This showed that both biopolymers were at least as efficient as the (semi-) synthetic polymers in sustaining induced supersaturation as in ten out of twelve API comparable results were obtained.