Knowledge and opinions of French dental students related to caries risk assessment and dental sealants (preventive and therapeutic).

OBJECTIVES: A national questionnaire study was performed to document knowledge and opinions of French dental students (FDSs) about minimal intervention (MI) in dentistry especially caries risk assessment (CRA) and dental sealants (DSs). MATERIALS AND METHODS: A questionnaire was administered to the fifth-year dental FDSs (n = 1370) from the 16 French dental schools. Descriptive and statistical analyses were performed. RESULTS: The response rate was 84.5%. A large majority of respondents (87.8%) linked MI with minimally invasive dentistry and 77.4% considered MI as a concept based on prevention. About 80% stated they use CRA in clinical practice, mostly without any specific form. If 80.4% of the respondents would base their treatment plans on CRA, only 55.1% would regularly plan preventive regimens according to individual risk level. However, while 96.6% declared they perform preventive DSs, only 44.3% considered therapeutic sealants as a routine treatment. Although 75.1% of FDSs stated that they had sufficient learning and training related to CRA, 55.9% thought that they need further education about preventive and therapeutic DSs. CONCLUSION: Although FDSs seem to be aware of the importance of CRA and preventive strategies, this study shows the need to harmonize the teaching in cariology according to the latest European recommendations. CLINICAL RELEVANCE: A national questionnaire study showed variability towards knowledge and opinions of FDSs related to MI in cariology. This may impact care provisions in their future professional life showing the urgent need to harmonize the teaching of MI in cariology in France.

Influence of Filler Composition on the Refractive Index of Four Different Enamel Shades of Composite Resins.

AIM AND OBJECTIVE: The purpose of this study was to measure the refractive index of four commercially available enamel resin composites, using optical coherence tomography (OCT) and their relationship with the atomic composition of the composite resin fillers utilizing an energy-dispersive X-ray fluorescence spectrometer (EDX). MATERIALS AND METHODS: Four different enamel composites, namely Enamel HRi color UE3, Enamel HFO color GE3, Vit-l-escence color Pearl Frost, and Amelogen Plus color Enamel White were tested. For each composite, disks with different thicknesses were fabricated and then light-cured according to the manufacturer's instructions. The disks were then stored in deionized water under 36.5 °C for at least 7 days. Each of the samples from the four different groups was measured in five distinctive points to analyze the optical and physical length using optical coherence tomography (OCT). Elemental analysis of all four different enamel shades of the composite was done using an EDX. RESULTS: The filler contents showed interesting differences in elemental composition and concentration; however, Si seemed to be a common filler component. The HRi composite presented a distinctive composition compared to other materials and was the only composite that showed a smaller percentage of SiO2, and also was the only composite that contained compounds, such as P2O5, ZnO, CaO, La2O3, and V2O5. The optical coherence tomography analysis showed the refractive index values of all tested enamel composites. Among the four different enamel composite resins tested, the enamel HRi composite demonstrated the most ideal refractive index to mimic natural enamel. CONCLUSION: The enamel HRi composite demonstrated a distinctive filler composition and this could be the main reason behind its higher refractive index. Nonetheless, it remains unclear how much of an impact this feature has in the final esthetic outcome of anterior composite restorations, where many other optical phenomena are also important. CLINICAL SIGNIFICANCE: The clinical success of any esthetic restorative procedure depends on diagnosing the proper treatment plan and also on executing this treatment with the right materials. On direct esthetic restorations, knowing the optical properties of such materials is fundamental, as they should be able to replicate both natural enamel and dentin. How to cite this article: Beolchi RS, Mehta D, Pelissier B, et al. Influence of Filler Composition on the Refractive Index of Four Different Enamel Shades of Composite Resins. J Contemp Dent Pract 2021;22(5):557-561.

Advances in light-curing units: four generations of LED lights and clinical implications for optimizing their use: Part 2. From present to future.

UNLABELLED: The first part of this series of two described the history of light curing in dentistry and developments in LED lights since their introduction over 20 years ago. Current second- and third-generation LED light units have progressively replaced their halogen lamp predecessors because of their inherent advantages. The background to this, together with the clinical issues relating to light curing and the possible solutions, are outlined in the second part of this article. Finally, the innovative features of what may be seen as the first of a new fourth-generation of LED lights are described and guidance is given for the practitioner on what factors to consider when seeking to purchase a new LED light activation unit. CLINICAL RELEVANCE: Adequate curing in depth is fundamental to clinical success with any light-activated restoration. To achieve this goal predictably, an appropriate light source needs to be combined with materials knowledge, requisite clinical skills and attention to detail throughout the entire restoration process. As dentists increasingly use light-cured direct composites to restore large posterior restorations they need to appreciate the issues central to effective and efficient light curing and to know what to look for when seeking to purchase a new light-curing unit.

Three generations of LED lights and clinical implications for optimizing their use. 1: from past to present.

In the present era of adhesive dentistry light-curing units are essential pieces of surgery equipment for everyday practice. The success and longevity of light-activated resin sealants, photo-cured restorations and orthodontic treatments are related to the efficacy of the light-curing process. Energy efficient blue LED lights are rapidly replacing their halogen lamp predecessors as the standard light source. Manufacturers are producing materials with different initiators and not all of these materials can be properly polymerized with blue LED lights.

Knowledge and Opinions of French Dental Students Toward Occlusal and Proximal Restorative Thresholds.

PURPOSE: To investigate the practices, knowledge and opinions of French dental students (FDSs) in various domains of minimal intervention (MI) in cariology. MATERIALS AND METHODS: A cross-sectional, questionnaire-based study was conducted in spring 2018 among all fifth-year French dental students (FDSs) from the 16 French dental schools. The present article focuses on restorative management. Statistical analyses (descriptive, chi-squared) were performed. RESULTS: The response rate was 84.5%. Overall, 97.4% of respondents would have operatively intervened for proximal and 83% for occlusal carious lesions, respectively, while non-or micro-invasive intervention would have been possible. Interestingly, 15% would completely open the occlusal fissures. For both occlusal and proximal lesions requiring a restoration, composite resin was indicated by over 95% of the respondents. In a clinical case, 51.6% of FDSs who rightly diagnosed an enamel carious lesion would operatively intervene. When FDSs could not diagnose the type of carious lesions, a high proportion of invasive actions were also reported (40%). FDSs who read scientific articles were more likely to consider the high importance of not filling sound teeth unnecessarily (p = 0.033). CONCLUSION: FDSs do not have sufficient awareness of MI guidelines regarding occlusal and proximal restorative thresholds. Efforts are required in dental schools to teach FDSs to postpone invasive/restorative strategies to later stages of carious progression. There is a need to strengthen prevention techniques and non-invasive options in the teaching of MI in cariology.

An Unusual Cause of Sepsis: Infected Iliofemoral Junction False Aneurysm following Extracorporeal Membrane Oxygenation.

The article presents an unusual cause of sepsis happening several weeks after heart transplant (infected iliofemoral junction false aneurysm) requiring iliofemoral reconstruction with arterial homograft by both retroperitoneal and inguinal approaches combined with Sartorius myoplasty.

Changes in irradiance and energy density in relation to different curing distances.

The present study aimed to assess the influence of curing distance on the loss of irradiance and power density of four curing light devices. The behavior in terms of power density of four different dental curing devices was analyzed (Valo, Elipar 2, Radii-Cal, and Optilux-401) using three different distances of photopolymerization (0 mm, 4 mm, and 8 mm). All devices had their power density measured using a MARC simulator. Ten measurements were made per device at each distance. The total amount of energy delivered and the required curing time to achieve 16 J/cm(2) of energy was also calculated. Data were statistically analyzed with one-way analysis of variance and Tukey's tests (p < 0.05). The curing distance significantly interfered with the loss of power density for all curing light devices, with the farthest distance generating the lowest power density and consequently the longer time to achieve an energy density of 16 J/cm(2) (p < 0.01). Comparison of devices showed that Valo, in extra power mode, showed the best results at all distances, followed by Valo in high power mode, Valo in standard mode, Elipar 2, Radii-Cal, and Optilux-401 halogen lamp (p < 0.01). These findings indicate that all curing lights induced a significant loss of irradiance and total energy when the light was emitted farther from the probe. The Valo device in extra power mode showed the highest power density and the shortest time to achieve an energy density of 16 J/cm(2) at all curing distances.

Changes in irradiance and energy density in relation to different curing distances

The present study aimed to assess the influence of curing distance on the loss of irradiance and power density of four curing light devices. The behavior in terms of power density of four different dental curing devices was analyzed (Valo, Elipar 2, Radii-Cal, and Optilux-401) using three different distances of photopolymerization (0 mm, 4 mm, and 8 mm). All devices had their power density measured using a MARC simulator. Ten measurements were made per device at each distance. The total amount of energy delivered and the required curing time to achieve 16 J/cm2 of energy was also calculated. Data were statistically analyzed with one-way analysis of variance and Tukey’s tests (p < 0.05). The curing distance significantly interfered with the loss of power density for all curing light devices, with the farthest distance generating the lowest power density and consequently the longer time to achieve an energy density of 16 J/cm2 (p < 0.01). Comparison of devices showed that Valo, in extra power mode, showed the best results at all distances, followed by Valo in high power mode, Valo in standard mode, Elipar 2, Radii-Cal, and Optilux-401 halogen lamp (p < 0.01). These findings indicate that all curing lights induced a significant loss of irradiance and total energy when the light was emitted farther from the probe. The Valo device in extra power mode showed the highest power density and the shortest time to achieve an energy density of 16 J/cm2 at all curing distances.