Acceleration of radiative recombination for efficient perovskite LEDs.

The increasing demands for more efficient and brighter thin-film light-emitting diodes (LEDs) in flat-panel display and solid-state lighting applications have promoted research into three-dimensional (3D) perovskites. These materials exhibit high charge mobilities and low quantum efficiency droop1-6, making them promising candidates for achieving efficient LEDs with enhanced brightness. To improve the efficiency of LEDs, it is crucial to minimize nonradiative recombination while promoting radiative recombination. Various passivation strategies have been used to reduce defect densities in 3D perovskite films, approaching levels close to those of single crystals3. However, the slow radiative (bimolecular) recombination has limited the photoluminescence quantum efficiencies (PLQEs) of 3D perovskites to less than 80% (refs. 1,3), resulting in external quantum efficiencies (EQEs) of LED devices of less than 25%. Here we present a dual-additive crystallization method that enables the formation of highly efficient 3D perovskites, achieving an exceptional PLQE of 96%. This approach promotes the formation of tetragonal FAPbI3 perovskite, known for its high exciton binding energy, which effectively accelerates the radiative recombination. As a result, we achieve perovskite LEDs with a record peak EQE of 32.0%, with the efficiency remaining greater than 30.0% even at a high current density of 100 mA cm-2. These findings provide valuable insights for advancing the development of high-efficiency and high-brightness perovskite LEDs.

Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures.

Light-emitting diodes (LEDs), which convert electricity to light, are widely used in modern society-for example, in lighting, flat-panel displays, medical devices and many other situations. Generally, the efficiency of LEDs is limited by nonradiative recombination (whereby charge carriers recombine without releasing photons) and light trapping1-3. In planar LEDs, such as organic LEDs, around 70 to 80 per cent of the light generated from the emitters is trapped in the device4,5, leaving considerable opportunity for improvements in efficiency. Many methods, including the use of diffraction gratings, low-index grids and buckling patterns, have been used to extract the light trapped in LEDs6-9. However, these methods usually involve complicated fabrication processes and can distort the light-output spectrum and directionality6,7. Here we demonstrate efficient and high-brightness electroluminescence from solution-processed perovskites that spontaneously form submicrometre-scale structures, which can efficiently extract light from the device and retain wavelength- and viewing-angle-independent electroluminescence. These perovskites are formed simply by introducing amino-acid additives into the perovskite precursor solutions. Moreover, the additives can effectively passivate perovskite surface defects and reduce nonradiative recombination. Perovskite LEDs with a peak external quantum efficiency of 20.7 per cent (at a current density of 18 milliamperes per square centimetre) and an energy-conversion efficiency of 12 per cent (at a high current density of 100 milliamperes per square centimetre) can be achieved-values that approach those of the best-performing organic LEDs.

The origins of dual-peak emission and anomalous exciton decay in 2D Sn-based perovskites.

Two-dimensional (2D) Sn-based perovskites exhibit significant potential in diverse optoelectronic applications, such as on-chip lasers and photodetectors. Yet, the underlying mechanism behind the frequently observed dual-peak emission in 2D Sn-based perovskites remains a subject of intense debate, and there is a lack of research on the carrier dynamics in these materials. In this study, we investigate these issues in a representative 2D Sn-based perovskite, namely, PEA2SnI4, through temperature-, excitation intensity-, angle-, and time-dependent photoluminescence studies. The results indicate that the high- and low-energy peaks originate from in-face and out-of-face dipole transitions, respectively. In addition, we observe an anomalous increase in the non-radiative recombination rate as temperature decreases. After ruling out enhanced electron-phonon coupling and Auger recombination as potential causes of the anomalous carrier dynamics, we propose that the significantly increased exciton binding energy (Eb) plays a decisive role. The increased Eb arises from enhanced electronic localization, a consequence of weakened lattice distortion at low temperatures, as confirmed by first-principles calculations and temperature-dependent x-ray diffraction measurements. These findings offer valuable insights into the electronic processes in the unique 2D Sn-based perovskites.

Unraveling the Origin of Long-Lifetime Emission in Low-Dimensional Copper Halides via a Magneto-optical Study.

The origin of the long lifetime of self-trapped exciton emission in low-dimensional copper halides is currently the subject of extensive debate. In this study, we address this issue in a prototypical zero-dimensional copper halide, Cs2(C18)2Cu2I4-DMSO, through magneto-optical studies at low temperatures down to 0.2 K. Our results exclude spin-forbidden dark states and indirect phonon-assisted recombination as the origin of the long photoluminescence lifetime. Instead, we propose that the minimal Franck-Condon factor of the radiative transition from excited states to the ground state is the decisive factor, based on the transition probability analysis. Our findings offer insights into the electronic processes in low-dimensional copper halides and have the potential to advance the application of these distinctive materials in optoelectronics.

Dual Channel Emissions of Kasha and Anti-Kasha from a Single Radical Molecule.

Stable open-shell luminescent radicals have recently attracted much attention due to their unique luminescence properties. However, a radical molecule with both Kasha and anti-Kasha doublet emission properties has not been reported. Herein, we have successfully synthesized a stable chlorine-substituted Chichibabin's hydrocarbon, TTM-TTM, along with its mono-radical counterpart, TTM-HTTM. The emission of TTM-TTM follows Kasha's rule in the near infrared region. However, TTM-HTTM shows dual channel doublet emissions of Kasha and anti-Kasha. Remarkably, these two types of emission compete dynamically in both solution and condensed states. Our findings provide valuable insights into the rational design and discovery of stable radicals that possess distinctive luminescent properties, thus broadening the horizons of luminescent materials research.

A Highly Luminescent Metallo-Supramolecular Radical Cage.

Luminescent metal-radicals have recently received increasing attention due to their unique properties and promising applications in materials science. However, the luminescence of metal-radicals tends to be quenched after formation of metallo-complexes. It is challenging to construct metal-radicals with highly luminescent properties. Herein, we report a highly luminescent metallo-supramolecular radical cage (LMRC) constructed by the assembly of a tritopic terpyridinyl ligand RL with tris(2,4,6-trichlorophenyl)methyl (TTM) radical and Zn2+. Electrospray ionization-mass spectrometry (ESI-MS), traveling-wave ion mobility-mass spectrometry (TWIM-MS), X-ray crystallography, electron paramagnetic resonance (EPR) spectroscopy, and superconducting quantum interference device (SQUID) confirm the formation of a prism-like supramolecular radical cage. LMRC exhibits a remarkable photoluminescence quantum yield (PLQY) of 65%, which is 5 times that of RL; meanwhile, LMRC also shows high photostability. Notably, significant magnetoluminescence can be observed for the high-concentration LMRC (15 wt % doped in PMMA film); however, the magnetoluminescence of 0.1 wt % doped LMRC film vanishes, revealing negligible spin-spin interactions between two radical centers in LMRC.

A Highly Stable Organic Luminescent Diradical.

It is very challenging to obtain stable room-temperature luminescent open-shell singlet diradicals. Herein we report the first stable Müller's hydrocarbon TTM-PhTTM with luminescent properties. Variable-temperature electron paramagnetic resonance spectroscopy measurements and theoretical calculations show that TTM-PhTTM has an open-shell singlet ground state with a diradical character of 90 %. Because of a small singlet-triplet energy gap, the open-shell singlet ground state can be thermally excited to a triplet state. TTM-PhTTM shows room-temperature deep-red emission in various solutions. Unusually high stability of TTM-PhTTM was also observed owing to effective steric hindrance and spin delocalization. Our results are beneficial to the rational design and discovery of more stable luminescent diradical materials.

Understanding the luminescent nature of organic radicals for efficient doublet emitters and pure-red light-emitting diodes.

The doublet-spin nature of radical emitters is advantageous for applications in organic light-emitting diodes, as it avoids the formation of triplet excitons that limit the electroluminescence efficiency of non-radical emitters. However, radicals generally show low optical absorption and photoluminescence yields. Here we explain the poor optical properties of radicals based on alternant hydrocarbons, and establish design rules to increase the absorption and luminescence yields for donor-acceptor-type radicals. We show that non-alternant systems are necessary to lift the degeneracy of the lowest energy orbital excitations; moreover, intensity borrowing from an intense high-lying transition by the low-energy charge-transfer excitation enhances the oscillator strength of the emitter. We apply these rules to design tris(2,4,6-trichlorophenyl)methyl-pyridoindolyl derivatives with a high photoluminescence quantum yield (>90%). Organic light-emitting diodes based on these molecules showed a pure-red emission with an over 12% external quantum efficiency. These insights may be beneficial for the rational design and discovery of highly luminescent doublet emitters.

Achieving High Efficiency at High Luminance in Fluorescent Organic Light-Emitting Diodes through Triplet-Triplet Fusion Based on Phenanthroimidazole-Benzothiadiazole Derivatives.

Achieving high efficiency at high luminance is one of the most important prerequisites towards practical application of any kind of light-emitting diode (LED). Herein, we report highly emissive organic fluorescent molecules based on phenanthroimidazole-benzothiadiazole derivatives capable of maintaining high external quantum efficiency (EQE) at high luminance enabled by triplet-triplet fusion (TTF) in doped organic LEDs. The PIBzP-, PIBzPCN-, and PIBzTPA-based devices showed EQEs of 8.27, 9.15, and 8.64 %, respectively, at luminance of higher than 1000 cd m-2 , with little efficiency roll-off.

Surface-Plasmon-Enhanced Perovskite Light-Emitting Diodes.

Perovskite light-emitting diodes (PeLEDs) have attracted considerable attention because of their potential in display and lighting applications. To promote commercialization of PeLEDs, it is important to improve the external quantum efficiency of the devices, which depends on their internal quantum efficiency (IQE) and light extraction efficiency. Optical simulations have revealed that 20-50% of the light generated in the device will be lost to surface plasmon (SP) modes formed in the metal/dielectric interfaces. Therefore, extracting the optical energy in SP modes to the air will greatly increase the light extraction efficiency of PeLEDs. In addition, the SPs can accelerate radiative recombination of the emitter via near-field effects. Thus, the IQE of a PeLED can also be enhanced by SP manipulation. In this review, first, general concepts of the SPs and how they can enhance the efficiency of LEDs are introduced. Then recent progresses in SP-enhanced emission of perovskite films and LEDs are systematically reviewed. After that, the challenges and opportunities of the SP-enhanced PeLEDs are shown, followed by an outlook of further development of the SPs in perovskite optoelectronic devices.

High stability and luminescence efficiency in donor-acceptor neutral radicals not following the Aufbau principle.

With their unusual electronic structures, organic radical molecules display luminescence properties potentially relevant to lighting applications; yet, their luminescence quantum yield and stability lag behind those of other organic emitters. Here, we designed donor-acceptor neutral radicals based on an electron-poor perchlorotriphenylmethyl or tris(2,4,6-trichlorophenyl)methyl radical moiety combined with different electron-rich groups. Experimental and quantum-chemical studies demonstrate that the molecules do not follow the Aufbau principle: the singly occupied molecular orbital is found to lie below the highest (doubly) occupied molecular orbital. These donor-acceptor radicals have a strong emission yield (up to 54%) and high photostability, with estimated half-lives reaching up to several months under pulsed ultraviolet laser irradiation. Organic light-emitting diodes based on such a radical emitter show deep-red/near-infrared emission with a maximal external quantum efficiency of 5.3%. Our results provide a simple molecular-design strategy for stable, highly luminescent radicals with non-Aufbau electronic structures.

Metal-promoted intermolecular electron transfer in tetrathiafulvalene-thiacalix[4]arene conjugates and tetrachlorobenzoquinone.

In this work, two series of tetrathiafulvalene (TTF) and thiacalix[4]arene (TCA) conjugates (TTF-TCA) were designed by CuAAC click reactions. The results obtained from NMR and (1)H NMR NOE indicated that their conformations of thiacalix[4]arene framework may prefer to 1,3-alternate. The cyclic voltammograms of four TTF-TCA compounds containing electroactive TTF units were provided. Meanwhile, their intermolecular electron-transfer (ET) behaviors with tetrachlorobenzoquinone (Q) mediated by different metal ions, Sc(3+), Pb(2+), Ag(+), Cd(2+), and Zn(2+), in CH3CN-CH2Cl2 (V/V = 1:1) solution were studied and analyzed via UV-vis spectroscopy. It was determined that intermolecular ET between each TTF-TCA and Q ensemble was not observed without introduction of the metal ions mentioned above. The added specified metal ions most likely induced the intermolecular ET between TTF-TCA and Q ensemble, and the effects of Sc(3+) functions were the most imperative. The intermolecular ET also proved to be reliant on the structure of TTF-TCA, where TTF-TCA 7a and 7b were more effective than TTF-TCA 6a and 6b. The difference may be credited to TTF-TCA 7a or 7b possessing two independent TTF pendants and providing a more synergic coordination among the TTF radical cation and Q radical anion with a metal ion.

Organic Light-Emitting Diodes Using a Neutral π†Radical as Emitter: The Emission from a Doublet.

Triplet harvesting is a main challenge in organic light-emitting devices (OLEDs), because the radiative decay of the triplet is spin-forbidden. Here, we propose a new kind of OLED, in which an organic open-shell molecule, (4-N-carbazolyl-2,6-dichlorophenyl)bis(2,4,6-trichlorophenyl)methyl (TTM-1Cz) radical, is used as an emitter, to circumvent the transition problem of triplet. For TTM-1Cz, there is only one unpaired electron in the highest singly occupied molecular orbital (SOMO). When this electron is excited to the lowest singly unoccupied molecular orbital (SUMO), the SOMO is empty. Thus, transition back of the excited electron to the SOMO is totally spin-allowed. Spectral analysis showed that electroluminescence of the OLED originated from the electron transition between SUMO and SOMO. The magneto-electroluminescence measurements revealed that the spin configuration of the excited state of TTM-1Cz is a doublet. Our results pave a new way to obtain 100% internal quantum efficiency of OLEDs.

Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes.

Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.

The Role of Solution Aggregation Property toward High-Efficiency Non-Fullerene Organic Photovoltaic Cells.

In organic photovoltaic cells, the solution-aggregation effect (SAE) is long considered a critical factor in achieving high power-conversion efficiencies for polymer donor (PD)/non-fullerene acceptor (NFA) blend systems. However, the underlying mechanism has yet to be fully understood. Herein, based on an extensive study of blends consisting of the representative 2D-benzodithiophene-based PDs and acceptor-donor-acceptor-type NFAs, it is demonstrated that SAE shows a strong correlation with the aggregation kinetics during solidification, and the aggregation competition between PD and NFA determines the phase separation of blend film and thus the photovoltaic performance. PDs with strong SAEs enable earlier aggregation evolutions than NFAs, resulting in well-known polymer-templated fibrillar network structures and superior PCEs. With the weakening of PDs' aggregation effects, NFAs, showing stronger tendencies to aggregate, tend to form oversized domains, leading to significantly reduced external quantum efficiencies and fill factors. These trends reveal the importance of matching SAE between PD and NFA. The aggregation abilities of various materials are further evaluated and the aggregation ability/photovoltaic parameter diagrams of 64 PD/NFA combinations are provided. This work proposes a guiding criteria and facile approach to match efficient PD/NFA systems.

Carrier Dynamics Determines the Optimization Strategies of Perovskite LEDs and PVs.

Metal halide perovskites have advanced greatly in both light-emitting diodes (LEDs) and photovoltaics (PVs) through delicate device engineering. The optimization strategies of perovskite LEDs and PVs have been demonstrated to be quite different. Here, we show that this dissimilarity in device fabrications can be well understood based on the analysis of carrier dynamics in LEDs and PVs.

A highly efficient open-shell singlet luminescent diradical with strong magnetoluminescence properties.

Developing open-shell singlet (OS) diradicals with high luminescent properties and exceptional single-molecule magnetoluminescence (ML) performance is extremely challenging. Herein, we propose a concept to enhance luminescent efficiency by adjusting the donor conjugation of OS diradicals, thereby achieving a highly luminescent diradical, DR1, with outstanding stability and making it a viable option for use in the emitting layer of organic light-emitting diodes (OLEDs). More importantly, the 0.5 wt%-DR1 doped film demonstrates significant single-molecule magnetoluminescence (ML) properties. A giant ML value of 210% is achieved at a magnetic field of 7 T, showing the great potential of DR1 in magneto-optoelectronic devices.

Conductivity-enhanced porous N/P co-doped metal-free carbon significantly enhances oxygen reduction kinetics for aqueous/flexible zinc-air batteries.

Heteroatom-doped metal-free carbon catalysts for oxygen reduction reactions have gained significant attention because of their unusual activity and economic cost. Here, a novel N/P co-doped porous carbon catalyst (NPPC) with a high surface area for oxygen reduction reaction (ORR) is constructed by a facile high-temperature calcination method employing ZIF-8 as the precursor and red phosphorus as the phosphorus source. In particular, ZIF-8 is firstly calcined to obtain N-doped carbon (NC) followed by further calcination with red phosphorus to obtain NPPC. Ultraviolet photoelectron spectroscopy (UPS) analysis shows that the ultra-low amount of P doping could significantly decrease the work function from 4.32 to 3.86 eV. The resultant catalyst exhibits a promising electrocatalytic activity with a half-wave potential (E1/2) of 0.87 V and a limiting current density (JL) of 5.15 mA cm-2. Besides, it also shows improved catalytic efficiency and excellent durability with a negligible decay of JL after 2000 CV cycles. Moreover, aqueous and solid-state flexible zinc-air batteries (ZAB) using the catalyst show a promising application potential. This work provides new insight into developing P/N-doped metal-free carbon ORR catalysts.

Indirect Bandgap Emission of the Metal Halide Perovskite FAPbI3 at Low Temperatures.

In this work, we provide a picture of the band structure of FAPbI3 by investigating low-temperature spin-related photophysics. When the temperature is lower than 120 K, two photoluminescence peaks can be observed. The lifetime of the newly emerged low-energy emission is much longer than that of the original high-energy one by two orders of magnitude. We propose that Rashba effect-caused spin-dependent band splitting is the reason for the emergence of the low-energy emission and verify this using the magneto-optical measurements.