Real-Time Monitoring of the Evaporation and Fission of Electrospray-Ionized Polystyrene Beads and Bacterial Pellets at Elevated Temperatures.

This study uses real-time monitoring, at microsecond time scales, with a charge-sensing particle detector to investigate the evaporation and fission processes of methanol/micrometer-sized polystyrene beads (PS beads) droplets and bacterial particles droplets generated via electrospray ionization (ESI) under elevated temperatures. By incrementally raising capillary temperatures, the solvent, such as methanol on 0.75 µm PS beads, experiences partial evaporation. Further temperature increase induces fission, and methanol molecules continue to evaporate until PS ions are detected after this range. Similar partial evaporation is observed on 3 µm PS beads. However, the shorter period of the fission temperature range is necessary compared to 0.75 µm PS beads. For the spherical-shaped bacterium, Staphylococcus aureus, the desolvation process shows a similar fission period as compared to 0.75 µm PS beads. Comparably, the rod-shaped bacteria, Escherichia coli EC11303, and E. coli strain W have shorter fission periods than S. aureus. This research provides insights into the evaporation and fission mechanisms of ESI droplets containing different sizes and shapes of micrometer-sized particles, contributing to a better understanding of gaseous macroion formation.

Rapid Quantification of Polyhydroxybutyrate Polymer from Single Bacterial Cells with Mass Spectrometry.

Polyhydroxyalkanoate (PHA) is one of the biocompatible and biodegradable plastics that can be produced and accumulated as granules inside microorganisms. In this study, a new approach to rapidly quantify a short-chain-length PHA, polyhydroxybutyrate (PHB), produced from genetically engineered Escherichia coli containing phaCAB is presented. The mass of each bacterial cell was measured using a laser-induced radio frequency (rf) plasma charge detection quadrupole ion trap mass spectrometer (LIRFP CD QIT-MS), and then, the PHB contents were determined by calculating the change in cellular mass. The quantitative results showed that the PHB contents measured by LIRFP CD QIT-MS were consistent with those by reference analysis, gas chromatography (GC). The PHB content of each bacterial sample can be obtained within 20 min from sampling using LIRFP CD QIT-MS while GC analysis takes 2 days. In addition, LIRFP CD QIT-MS does not use any hazardous chemicals in cellular mass quantification as compared to GC. This indicates that LIRFP CD QIT-MS has potential in routine monitoring of PHB production.

Ionization of Submicrometer-Sized Particles by Laser-Induced Radiofrequency Plasma for Mass Spectrometric Analysis.

A laser-induced rf plasma (LIRFP) ion source was developed to ionize submicrometer-sized particles for the first time. The LIRFP ion source can increase the charge of those particles to several thousand charges via charge exchange reactions so that those particles can be trapped and analyzed with a charge detection quadrupole ion trap-mass spectrometer (CD QIT-MS). Different reagent gases for charge exchange reaction were investigated, viz. argon, nitrogen, oxygen, methane, helium, krypton, xenon, argon/methane (with ratios of 10:1 and 2:1), argon/nitrogen (with a ratio of 1:1), nitrogen/oxygen (10:1), krypton/methane (10:1), and air. The average charge of 0.75 µm polystyrene particles could reach 1631 using an argon/methane mixture with a ratio of ∼10:1. The average charges for freeze-dried Escherichia coli EC11303, Escherichia coli strain W, and Staphylococcus aureus were 842, 1112, and 971, respectively, with a mass-to-charge ratio ( m/ z) range from 107 to 108; and the average masses were 3.5 × 1010 Da, 6.0 × 1010 Da, and 5.6 × 1010 Da, respectively. The average mass and charge of the vaccinia virus were ∼9.1 × 109 Da and ∼708 with a m/ z of ∼107. This LIRFP CD QIT-MS method was rapid with only 20 min for each sample measurement.

Development of Visible-Wavelength MALDI Cell Mass Spectrometry for High-Efficiency Single-Cell Analysis.

Mass is a fundamental physical property of an individual cell, from which is revealed the cell growth, cycle, and activity. Taking advantage of cell mass spectrometry (CMS), accurate mass measurement of a charged single cell has been achieved. However, with the increasing demand for high-efficiency single-cell analysis in biology, the limited throughput and inefficient cell desorption/ionization of the CMS inevitably become important issues. To address the challenge, a state of the art visible-wavelength matrix assisted laser desorption/ionization (MALDI) CMS was developed. The employed transmission mode laser ablation and fast evaporation sample preparation enabled the visible-wavelength MALDI to be soft enough and to generate intact charged cells for mass measurement. By using resorufin as matrix, ten sorts of cells, viz., red blood cells (RBCs), Jurkat (JK), CCRF-CEM, SNU-5, BGC-803, MCF-7, L-O2, 293T, Hep G2, and A549 cells, have been successfully analyzed. It was found that the desorption/ionization efficiency of visible-wavelength MALDI was at least 3-fold higher than that of conventional laser-induced acoustic desorption (LIAD) and relevant to the suspension/adherent property of analyzed cells. Based on the measured mass, different cell types in either the individual or mixed state can be differentiated successfully.

Quantitative assessment of protein adsorption on microparticles with particle mass spectrometry.

In this paper, particle mass spectrometry (PMS), which consists of an aerodynamic desorption/ionization (AD) source, a quadrupole ion trap (QIT) mass analyzer, and a charge detector, was exploited to characterize the protein adsorption on microparticles based on the mass variations of microparticles before and after protein adsorption. This method is simple and has low sample cost. Importantly, its mass resolution is good enough to distinguish the microparticles with and without protein. For the adsorption of bovine serum albumin (BSA) on 3 µm porous poly styrene-divinylbenzene (poly S-DVB), the minimum mass increase that can be resolved by PMS corresponds to 128 fg (1.8 ng/cm(2)) or 1.17 × 10(6) BSA molecules on each poly S-DVB particle. With PMS, the adsorption process of BSA on poly S-DVB spheres was successfully characterized, and the obtained maximum adsorption capacity qm and dissociation constant Kd were consistent with that determined by the conventional depletion method. In addition, the influence of surface modification of silica particles on the enzyme immobilization was evaluated. Compared with C4 (propyldimethylsilane), C8 (octyldimethylsilane), and Ph (phenyldimethylchlorosilane), the CN (cyanoethyldimethylchlorosilane) functionalized silica particles were screened to be most beneficial for the immobilization of both lysozyme and trypsin.

Measuring masses of large biomolecules and bioparticles using mass spectrometric techniques.

Large biomolecules and bioparticles play a vital role in biology, chemistry, biomedical science and physics. Mass is a critical parameter for the characterization of large biomolecules and bioparticles. To achieve mass analysis, choosing a suitable ion source is the first step and the instruments for detecting ions, mass analyzers and detectors should also be considered. Abundant mass spectrometric techniques have been proposed to determine the masses of large biomolecules and bioparticles and these techniques can be divided into two categories. The first category measures the mass (or size) of intact particles, including single particle quadrupole ion trap mass spectrometry, cell mass spectrometry, charge detection mass spectrometry and differential mobility mass analysis; the second category aims to measure the mass and tandem mass of biomolecular ions, including quadrupole ion trap mass spectrometry, time-of-flight mass spectrometry, quadrupole orthogonal time-of-flight mass spectrometry and orbitrap mass spectrometry. Moreover, algorithms for the mass and stoichiometry assignment of electrospray mass spectra are developed to obtain accurate structure information and subunit combinations.

Fluorescent nanodiamond immunosensors for clinical diagnostics of tuberculosis.

Fluorescent nanodiamonds (FNDs) are carbon nanoparticles containing a dense ensemble of nitrogen-vacancy defects as color centers. These centers have exceptional photostability and unique quantum properties, making them useful for ultrasensitive biosensing applications. This work employed FNDs conjugated with antibodies as magneto-optical immunosensors for tuberculosis (TB) diagnostics using competitive spin-enhanced lateral flow immunoassay (SELFIA). ESAT6 (6-kDa early secretory antigenic target) of Mycobacterium tuberculosis is a clinical marker of TB. We evaluated the assay's performance using the recombinant ESAT6 antigen and its antibodies noncovalently coated on FNDs. A detection limit of ∼0.02 ng mL-1 was achieved with the lateral flow membrane strip pre-structured with a narrow channel of 1 mm width. Adopting a cut-off value of 24.0 ng mm-1 for 100-nm FNDs on the strips, the method detected 49 out of 50 clinical samples with Mycobacterium tuberculosis complexes. In contrast, none of the assays for 10 clinical samples with non-tuberculous mycobacteria (NTM) isolates exhibited the presence of ESAT6. These results suggest that the SELFIA platform is applicable for TB detection and can differentiate TB from NTM infections, which also affect the human respiratory system. The FND-enabled immunosensing techniques are versatile and promising for early detection of TB and other diseases, opening a new avenue for biomedical applications of carbon-based nanomaterials.

Enhancing the sequence coverage of nanodiamond-extracted early secretory proteins from the Mycobacterium tuberculosis complex.

The unambiguous identification of protein species requires high sequence coverage. In this study, we successfully improved the sequence coverage of early secretory 10 kDa cell filtrate protein (CFP-10) and 6 kDa early secretory antigenic target (ESAT-6) proteins from the Mycobacterium tuberculosis complex (MTC) in broth culture media with the use of the 4-chloro-α-cyanocinnamic acid (Cl-CCA) matrix. Conventional matrices, α-cyano-hydroxy-cinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB), were also used for comparison. After nanodiamond (ND) extraction, the sequence coverage of the CFP-10 protein was 87% when CHCA and DHB matrices were used, and the ESAT-6 protein was not detected. On the other hand, the sequence coverage for ND-extracted CFP-10 and ESAT-6 could reach 94% and 100%, respectively, when the Cl-CCA matrix was used and with the removal of interference from bovine serum albumin (BSA) protein and α-crystallin (ACR) protein. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) was also adopted to analyze the protein mass spectra. A total of 6 prominent ion signals were observed, including ESAT-6 protein peaks at mass-to-charge ratios (m/z) of ∼7931, ∼7974, ∼9768, and ∼9813 and CFP-10 protein peaks at m/z of ∼10 100 and ∼10 660. The ESAT-6 ion signals were always detected concurrently with CFP-10 ion signals, but CFP-10 ion signals could be detected alone without the ESAT-6 ion signals. Furthermore, the newly found ESAT-6 peaks were also confirmed using a Mag-Beads-Protein G kit with an ESAT-6 antibody to capture the ESAT-6 protein, which was also consistent with the sequence coverage analysis.

Ambient aerodynamic desorption/ionization method for microparticle mass measurement.

An ambient desorption/ionization method, named aerodynamic desorption (AD), was proposed for the in situ rapid mass measurement of microparticles. The AD method exploited the discontinuous atmospheric pressure interface (DAPI) to generate a pulsed airflow, which was used to desorb the microparticles under atmospheric pressure. Various microparticles, e.g., bacteria, cell, polystyrene, synthetic diamond, and silica particles, with different size and surface component were successfully desorbed. Similar to that in the conventional laser-induced acoustic desorption (LIAD) method, these microparticles were desorbed as precharged ions in the AD process and the charge number was largely relevant to the particle size. However, compared with LIAD, the sensitivity of the AD method was higher. A lower concentration of particles was required for the analysis. In addition, the construction and sampling process of AD source were much simpler. All types of liquid, solid, or/and gaseous samples can be directly sampled under ambient condition. As a demonstration of this AD method, the in situ mass analysis of red blood cells (RBCs) and E. coli bacteria were carried out using a homemade ambient AD mass spectrometer consisting of AD source, QIT mass analyzer, and charge detector. Their mass and mass distributions were obtained successfully.

Game-theory-based search engine to automate the mass assignment in complex native electrospray mass spectra.

Electrospray ionization coupled to native mass spectrometry (MS) has evolved into an important tool in structural biology to decipher the composition of protein complexes. However, the mass analysis of heterogeneous protein assemblies is hampered because of their overlapping charge state distributions, fine structure, and peak broadening. To facilitate the mass analysis, it is of importance to automate preprocessing raw mass spectra, assigning ion series to peaks and deciphering the subunit compositions. So far, the automation of preprocessing raw mass spectra has not been accomplished; Massign was introduced to simplify data analysis and decipher the subunit compositions. In this study, we develop a search engine, AutoMass, to automatically assign ion series to peaks without any additional user input, for example, limited ranges of charge states or ion mass. AutoMass includes an ion intensity-dependent method to check for Gaussian distributions of ion series and an ion intensity-independent method to address highly overlapping and non-Gaussian distributions. The minimax theorem from game theory is adopted to define the boundaries. With AutoMass, the boundaries of ion series in the well-resolved tandem mass spectra of the hepatitis B virus (HBV) capsids and those of the mass spectrum from CRISPR-related cascade protein complex are accurately assigned. Theoretical and experimental HBV ion masses are shown in agreement up to ~0.03%. The analysis is finished within a minute on a regular workstation. Moreover, less well-resolved mass spectra, for example, complicated multimer mass spectra and norovirus capsid mass spectra at different levels of desolvation, are analyzed. In sum, this first-ever fully automatic program reveals the boundaries of overlapping ion peak series and can further aid developing high-throughput native MS and top-down proteomics.

Development of a linear ion trap mass spectrometer capable of analyzing megadalton MALDI ions.

Detecting megadalton matrix-assisted laser desorption/ionization (MALDI) ions in an ion trap mass spectrometer is a technical challenge. In this study, megadalton protein and polymer ions were successfully measured by MALDI linear ion trap mass spectrometer (LIT-MS) for the first time. The LIT-MS is comprised of a Thermo linear ion trap mass analyzer and a highly sensitive charge-sensing particle detector (CSPD). A newly designed radio frequency (rf) scan mode with dipolar resonance ejection techniques is proposed to extend the mass range of LIT-MS up to one million Thomson (Th). We analyze high mass ions with mass-to charge (m/z) ratios ranging from 100 kTh to 1 MTh, including thyroglobulin, alpha-2-macroglobulin, immunoglobulins (e.g., IgG and IgM), and polymer (∼ 940 kTh) ions. Besides, it is also very challenging for ion trap mass spectrometry to detect megadalton ions at low concentrations. By adopting high affinity carboxylated/oxidized detonation nanodiamonds (oxDNDs) to enrich IgM molecules and form antibody-nanodiamond conjugates, we have successfully reached âˆ¼ 5 nM (5 µg/mL) concentration which is better than that by the other techniques.

Detonation nanodiamonds for rapid detection of clinical isolates of Mycobacterium tuberculosis complex in broth culture media.

Routinely used molecular diagnostic methods for mycobacterium identification are expensive and time-consuming. To tackle this problem, we develop a method to streamline identification of Mycobacterium tuberculosis complex (MTBC) in broth culture media by using detonation nanodiamonds (DNDs) as a platform to effectively capture the antigen secreted by MTBC which is cultured in BACTEC MGIT 960, followed by the analysis of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS). The 5 nm DNDs can capture the MTBC secretory antigen without albumin interference. With on diamond digestion, we confirm the DND captured antigen is cell filtrate protein 10 (CFP-10) because its Mascot analysis shows a score of 68. The dot blotting method further verifies a positive reaction with anti-CFP-10, indicating that CFP-10 is secreted in the medium of mycobacterium growth indicator tube (MGIT) and captured by DNDs. The minimal CFP-10 protein detection limit was 0.09 µg/mL. Furthermore, our approach can avoid the false-positive identification of MTBC by immunological methods due to cross-reactivity. Five hundred consecutive clinical specimens subjected to routine mycobacteria identification in hospital were used in this study, and the sensitivity of our method is 100% and the specificity is 98%. The analysis of each MTBC sample from culture solution can be finished within 1 h and thus shortens the turnaround time of MTBC identification of gold standard culture methods. In sum, DND MALDI-TOF MS for the detection of MTBC is rapid, specific, safe, reliable, and inexpensive.

The development of charge detection-quadrupole ion trap mass spectrometry driven by rectangular and triangular waves.

In this article, the charge detection quadrupole mass spectrometry (CD-ITMS) driven by rectangular and triangular waveforms (rect-CD-ITMS and tri-CD-ITMS) was developed for the characterization of microparticles. Since the frequency scan of rectangular and triangular waveform could be realized easier than that of sinusoidal waveform, this research intends to provide simpler operation modes for CD-ITMS. In order to demonstrate the feasibility of rect-CD-ITMS and tri-CD-ITMS, the discharge onset voltage, ejection point of analyzed particles, and the achieved mass resolution were analyzed and compared with the case in conventional sinusoidal CD-ITMS (sin-CD-ITMS). The results indicated that the rect-CD-ITMS and tri-CD-ITMS can work well for the mass measurement of microparticles by using frequency scan. Identical mass resolutions were achieved under the same root mean square (RMS) voltage of different waveforms. The mass resolution was further improved by increasing the applied voltage and signal-to-noise ratio (S/N) of charge detector. Moreover, the rect-CD-ITMS and tri-CD-ITMS were applied to characterize red blood cells (RBCs). According to the obtained mean masses and mass distributions, normal and anemic RBCs were distinguished successfully.

Interpreting the charge state assignment in electrospray mass spectra of bioparticles.

In electrospray ionization mass spectra of heterogeneous protein complexes and other bioparticles, accurate mass determination is often hampered by the inaccuracy in determination of the charge states for individual signals. Here, we describe an algorithm that automatically minimizes the standard deviation in a series of related ion peaks with varying numbers of charges. The algorithm assumes that the mass is invariant and allows the determination of the correct charge state in a peak series. The analysis results in a periodic pattern, which can be interpreted as a harmonic oscillator, when the minimum standard deviation of a charge state series is found. We observed that a mass resolution of much less than 1000 in the acquired mass spectra is sufficient to achieve a correct charge state assignment. Moreover, the boundaries of mixed species can be identified by examining the loss of periodicity in the pattern of the analysis. We tested our algorithm successfully on novel spectra and on spectra reported in the literature with sample masses up to several million Dalton, e.g., viral particles, polyethylene glycol polymers, and polystyrene nanoparticles.

Characterization of column packing materials in high-performance liquid chromatography by charge-detection quadrupole ion trap mass spectrometry.

This article reports an application of charge-detection quadrupole ion trap mass spectrometry (CD-ITMS) to characterize the column packing materials in high-performance liquid chromatography (HPLC). Both the mean mass and the mass distribution of the packing materials are obtained and used to calculate the specific surface area of unbonded silica, the carbon load of the bonded silica, and their particle size distributions. The obtained specific surface areas and carbon loads are consistent with those measured independently by nitrogen sorption and elemental analysis respectively, whereas the derived size distributions show better resolution than that measured by a laser particle size analyzer. Furthermore, we evaluate the uniformity of particle size, which is the key parameter for column efficiency of the liquid chromatography by analyzing the mass distribution of the packing materials at the top and bottom of the column. A broader mass distribution, which yields decreased column efficiency, is observed for the column top because of the excessive use of the column. Our results suggest that CD-ITMS can serve as an alternative means for the characterization of the packing materials in HPLC and is potentially useful for column quality control.

Characterization of bioparticles using a miniature cylindrical ion trap mass spectrometer operated at rough vacuum.

A miniature cylindrical ion trap mass spectrometer (CIT-MS) equipped with an inexpensive mechanical pump was constructed, and used to measure the masses of cells and microparticles generated by laser induced acoustic desorption ionization. Compared with a previous lab scale quadrupole ion trap mass spectrometer (QIT-MS), the novel miniature CIT-MS had smaller volume (the radius r(0)=5 mm), simpler ion trap fabrication and overall instrument construction, required a lower trapping voltage, and reduced the weight, power and cost of the instrument. The CIT-MS was calibrated using standard polystyrene beads of 2.982 µm diameter. The CIT-MS was used to measure the total dry weight of human red blood cells (RBCs) from a healthy female adult (2.12×10(13) Da) and a patient with anemia (1.35×10(13) Da). The coefficient of variance (CV) for the healthy individual was 21% and that for the patient was 30.4%. The CIT-MS was also applied to guinea pig RBCs and the total dry weight was determined as 1.34×10(13) Da with a CV of 37.9%. These measurements are consistent with previous QIT-MS measurements. The new miniaturized instrument has potential for applications in field-portable, biological and aerosol analysis.

Redox chemistry in thin layers of organometallic complexes prepared using ion soft landing.

Soft landing (SL) of mass-selected ions is used to transfer catalytically-active metal complexes complete with organic ligands from the gas phase onto an inert surface. This is part of an effort to prepare materials with defined active sites and thus achieve molecular design of surfaces in a highly controlled way. Solution-phase electrochemical studies have shown that V(IV)O(salen) reacts in the presence of acid to form V(V)O(salen)(+) and the deoxygenated V(III)(salen)(+) complex-a key intermediate in the four electron reduction of O(2) by vanadium-salen. In this work, the V(V)O(salen)(+) and [Ni(II)(salen) + H](+) complexes were generated by electrospray ionization and mass-selected before being deposited onto an inert fluorinated self-assembled monolayer (FSAM) surface on gold. A time dependence study after ion deposition showed loss of O from V(V)O(salen)(+) forming V(III)(salen)(+) over a four-day period, indicating a slow interfacial reduction process. Similar results were obtained when other protonated molecules were co-deposited with V(V)O(salen)(+) on the FSAM surface. In all these experiments oxidation of the V(III)(salen)(+) product occurred upon exposure to oxygen or to air. The cyclic regeneration of V(V)O(salen)(+) upon exposure to molecular oxygen and its subsequent reduction to V(III)(salen)(+) in vacuum completes the catalytic cycle of O(2) reduction by the immobilized vanadium-salen species. Moreover, our results represent the first evidence of formation of reactive organometallic complexes on substrates in the absence of solvent. Remarkably, deoxygenation of the oxo-vanadium complex, previously observed only in highly acidic non-aqueous solvents, occurs on the surface in the UHV environment using an acid which is deposited into the inert monolayer. This acid can be a protonated metal complex, e.g. [Ni(II)(salen) + H](+), or an organic acid such as protonated diaminododecane.

Comparison of Postoperative Acute Kidney Injury Between Laparoscopic and Laparotomy Procedures in Elderly Patients Undergoing Colorectal Surgery.

OBJECTIVES: Postoperative acute kidney injury (AKI) has an unfavorable impact on both short-term and long-term outcomes. The aim of this retrospective study was to compare the incidence of postoperative AKI between laparoscopic and laparotomy procedures in elderly patients undergoing colorectal surgery. METHODS: Medical records of elderly (65 y and older) patients who underwent colorectal cancer surgery between May 2016 and July 2018 at our tertiary hospital were reviewed. Patients with Union Internationale Contre le Cancer (UICC) stage II and III colorectal cancer, without neoadjuvant treatment, were divided into laparoscopic procedure group and laparotomy group. AKI, determined by the Acute Kidney Injury Network criteria, was compared between the 2 groups, before and after propensity matching. Multivariable analysis was made to identify independent risk factors of AKI. RESULTS: In all, 285 patients met the study inclusion criteria. Postoperative AKI occurred only in 16 patients from the laparotomy group (n=212). The incidence of AKI was significantly lower in the laparoscopic procedure group (n=73) compared with the laparotomy group (0% vs. 7.5%; P=0.015). Seventy-three patients who underwent laparoscopic surgery were matched with 73 of 212 patients who underwent open surgery, by using propensity score analysis, and the incidence of AKI in the 2 groups was similar (0% vs. 8.3%; P=0.028). Multivariable analysis showed that intraoperative metaraminol dose >1 mg (odds ratio=2.742, P=0.042) is an independent risk factor for postoperative AKI. CONCLUSION: In elderly patients, the incidence of AKI after colorectal cancer surgery is lower in the laparoscopic procedure group, maybe related to hemodynamic stability and less vasoconstriction.

Ion soft landing using a rectilinear ion trap mass spectrometer.

A new ion soft landing instrument has been built for the controlled deposition of mass selected polyatomic ions. The instrument has been operated with an electrospray ionization source; its major components are an electrodynamic ion funnel to reduce ion loss, a 90-degree bent square quadrupole that prevents deposition of fast neutral molecules onto the landing surface, and a novel rectilinear ion trap (RIT) mass analyzer. The ion trap is elongated (inner dimensions: 8 mm x 10 mm x 10 cm). Three methods of mass analysis have been implemented. (i) A conventional mass-selective instability scan with radial resonance ejection can provide a complete mass spectrum. (ii) The RIT can also be operated as a continuous rf/dc mass filter for isolation and subsequent soft landing of ions of the desired m/ z value. (iii) The 90-degree bent square quadrupole can also be used as a continuous rf/dc mass filter. The mass resolution (50% definition) of the RIT in the trapping mode (radial ion ejection) is approximately 550. Ions from various test mixtures have been mass selected and collected on fluorinated self-assembled monolayers on gold substrates, as verified by analysis of the surface rinses. Desorption electrospray ionization (DESI) has been used to confirm intact deposition of [Val (5)]-Angiotensin I on a surface. Nonmass selective currents up to 1.1 nA and mass-selected currents of up to 500 pA have been collected at the landing surface using continuous rf/dc filtering with the RIT. A quantitative analysis of rinsed surfaces showed that the overall solution-to-solution soft landing yields are between 0.2 and 0.4%. Similar experiments were performed with rf/dc isolation of both arginine and lysine from a mixture using the bent square quadrupole in the rf/dc mode. The unconventional continuous mass selection methods maximize soft landing yields, while still allowing the simple acquisition of full mass spectra.

Forced dried droplet method for MALDI sample preparation.

A forced dried droplet method (FDD) is developed to overcome the drawbacks of the conventional dried-droplet (DD) method for matrix assisted laser desorption/ionization (MALDI) sample preparation. The crystals produced by the DD method are heterogeneous and irregularly distributed, and thus many methods have tried to solve the problems. However, most of them spend more time or need additional instruments to generate homogeneous microcrystals. The FDD sample preparation method can produce uniform microcrystals with homogeneous size distribution in few minutes without additional instruments. Stirring the sample spot solution (an agitation process) with a pipette tip can change the crystal size distribution which is observed by the microscope. Mass spectrometric analysis shows that the smaller the crystal size is, the better the ion signal intensity is. The formation of microcrystals can be explained with the effective rate of secondary nucleation. The relative standard deviation (RSD) of the FDD method is ∼16% which is comparable to the two-layer (TL) method and is better than the DD method.