RESUMO
Near-infrared (NIR) emitting phosphors draw much attention because they show great applicability and development prospects in many fields. Herein, a series of inverse spinel-type structured LiGa5O8 phosphors with a high concentration of Cr3+ activators is reported with a dual emission band covering NIR-I and II regions. Except for strong ionic exchange interactions such as Cr3+-Cr3+ and Cr3+ clusters, an intervalence charge transfer (IVCT) process between aggregated Cr ion pairs is proposed as the mechanism for the ~1210 nm NIR-II emission. Comprehensive structural and luminescence characterization points to IVCT between two Cr3+ being induced by structural distortion and further enhanced by irradiation. Construction of the configurational energy level diagram enabled elucidation of this transition within the IVCT process. Therefore, this work provides insight into the emission mechanism within the high Cr3+ concentration system, revealing a new design strategy for NIR-II emitting phosphors to promote its response.
RESUMO
Wadsley-Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium-molybdenum oxide shear phase (Nb, Mo)13 O33 with superior electrochemical Li-ion storage performance, including an ultralong cycling lifespan of at least 15000â cycles. During electrochemical cycling, a reversible single-phase solid-solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X-ray diffraction, with the valence and short-range structural changes of the electrode probed by in situ Nb and Mo K-edge X-ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in-depth understanding of how this stabilizes the oxide structure during cycling with implications for future long-life battery material design.
RESUMO
Existing lithium-ion battery technology is struggling to meet our increasing requirements for high energy density, long lifetime, and low-cost energy storage. Here, a hybrid electrode design is developed by a straightforward reengineering of commercial electrode materials, which has revolutionized the "rocking chair" mechanism by unlocking the role of anions in the electrolyte. Our proof-of-concept hybrid LiFePO4 (LFP)/graphite electrode works with a staged deintercalation/intercalation mechanism of Li+ cations and PF6 - anions in a broadened voltage range, which was thoroughly studied by ex situ X-ray diffraction, ex situ Raman spectroscopy, and operando neutron powder diffraction. Introducing graphite into the hybrid electrode accelerates its conductivity, facilitating the rapid extraction/insertion of Li+ from/into the LFP phase in 2.5 to 4.0 V. This charge/discharge process, in turn, triggers the in situ formation of the cathode/electrolyte interphase (CEI) layer, reinforcing the structural integrity of the whole electrode at high voltage. Consequently, this hybrid LFP/graphite-20% electrode displays a high capacity and long-term cycling stability over 3,500 cycles at 10 C, superior to LFP and graphite cathodes. Importantly, the broadened voltage range and high capacity of the hybrid electrode enhance its energy density, which is leveraged further in a full-cell configuration.
RESUMO
Oxides composed of an oxygen framework and interstitial cations are promising cathode materials for lithium-ion batteries. However, the instability of the oxygen framework under harsh operating conditions results in fast battery capacity decay, due to the weak orbital interactions between cations and oxygen (mainly 3d-2p interaction). Here, a robust and endurable oxygen framework is created by introducing strong 4s-2p orbital hybridization into the structure using LiNi0.5 Mn1.5 O4 oxide as an example. The modified oxide delivers extraordinarily stable battery performance, achieving 71.4 % capacity retention after 2000â cycles at 1â C. This work shows that an orbital-level understanding can be leveraged to engineer high structural stability of the anion oxygen framework of oxides. Moreover, the similarity of the oxygen lattice between oxide electrodes makes this approach extendable to other electrodes, with orbital-focused engineering a new avenue for the fundamental modification of battery materials.
RESUMO
Portable near-infrared (NIR) light sources are in high demand for applications in spectroscopy, night vision, bioimaging, and many others. Typical phosphor designs feature isolated Cr3+ ion centers, and it is challenging to design broadband NIR phosphors based on Cr3+-Cr3+ pairs. Here, we explore the solid-solution series SrAl11.88-xGaxO19:0.12Cr3+ (x = 0, 2, 4, 6, 8, 10, and 12) as phosphors featuring Cr3+-Cr3+ pairs and evaluate structure-property relations within the series. We establish the incorporation of Ga within the magentoplumbite-type structure at five distinct crystallographic sites and evaluate the effect of this incorporation on the Cr3+-Cr3+ ion pair proximity. Electron paramagnetic measurements reveal the presence of both isolated Cr3+ and Cr3+-Cr3+ pairs, resulting in NIR luminescence at approximately 650-1050 nm. Unexpectedly, the origin of broadband NIR luminescence with a peak within the range 740-820 nm is related to the Cr3+-Cr3+ ion pair. We demonstrate the application of the SrAl5.88Ga6O19:0.12Cr3+ phosphor, which possesses an internal quantum efficiency of â¼85%, a radiant flux of â¼95 mW, and zero thermal quenching up to 500 K. This work provides a further understanding of spectral shifts in phosphor solid solutions and in particular the application of the magentoplumbites as promising next-generation NIR phosphor host systems.
RESUMO
Single-phase perovskite oxides that contain nonprecious metals have long been pursued as candidates for catalyzing the oxygen evolution reaction, but their catalytic activity cannot meet the requirements for practical electrochemical energy conversion technologies. Here a cation deficiency-promoted phase separation strategy to design perovskite-based composites with significantly enhanced water oxidation kinetics compared to single-phase counterparts is reported. These composites, self-assembled from perovskite precursors, comprise strongly interacting perovskite and related phases, whose structure, composition, and concentration can be accurately controlled by tailoring the stoichiometry of the precursors. The composite catalyst with optimized phase composition and concentration outperforms known perovskite oxide systems and state-of-the-art catalysts by 1-3 orders of magnitude. It is further demonstrated that the strong interfacial interaction of the composite catalysts plays a key role in promoting oxygen ionic transport to boost the lattice-oxygen participated water oxidation. These results suggest a simple and viable approach to developing high-performance, perovskite-based composite catalysts for electrochemical energy conversion.
RESUMO
Spinel LiNi0.5 Mn1.5 O4 (LNMO) is a promising cathode candidate for the next-generation high energy-density lithium-ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site-selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd 3 â¾ m structure. This site-selective doping not only suppresses unfavorable two-phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg-doped LNMOs exhibit extraordinarily stable electrochemical performance in both half-cells and prototype full-batteries with novel TiNb2 O7 counter-electrodes. This work pioneers an atomic-doping engineering strategy for electrode materials that could be extended to other energy materials to create high-performance devices.
RESUMO
Reaction of the chloranilate dianion with Y(NO3 )3 in the presence of Et4 N+ in the appropriate proportions results in the formation of (Et4 N)[Y(can)2 ], which consists of anionic square-grid coordination polymer sheets with interleaved layers of counter-cations. These counter-cations, which serve as squat pillars between [Y(can)2 ] sheets, lead to alignment of the square grid sheets and the subsequent generation of square channels running perpendicular to the sheets. The crystals are found to be porous and retain crystallinity following cycles of adsorption and desorption. This compound exhibits a high affinity for volatile guest molecules, which could be identified within the framework by crystallographic methods. In situ neutron powder diffraction indicates a size-shape complementarity leading to a strong interaction between host and guest for CO2 and CH4 . Single-crystal X-ray diffraction experiments indicate significant interactions between the host framework and discrete I2 or Br2 molecules. A series of isostructural compounds (cat)[MIII (X-an)2 ] with M=Sc, Gd, Tb, Dy, Ho, Er, Yb, Lu, Bi or In, cat=Et4 N, Me4 N and X-an=chloranilate, bromanilate or cyanochloranilate bridging ligands have been generated. The magnetic properties of representative examples (Et4 N)[Gd(can)2 ] and (Et4 N)[Dy(can)2 ] are reported with normal DC susceptibility but unusual AC susceptibility data noted for (Et4 N)[Gd(can)2 ].
RESUMO
The interdependent effects of temperature and guest uptake on the structure of the ultramicroporous metal-organic framework [Cu3 (cdm)4 ] (cdm=C(CN)2 (CONH2 )- ) were explored in detail by using in situ neutron scattering and density functional theory calculations. The tetragonal lattice displays an anisotropic thermal response related to a hinged "lattice-fence" mechanism, unusual for this topology, which is facilitated by pivoting of the rigid cdm anion about the Cu nodes. Calculated pore-size metrics clearly illustrate the potential for temperature-mediated adsorption in ultramicroporous frameworks due to thermal fluctuations of the pore diameter near the value of the target guest kinetic diameter, though in [Cu3 (cdm)4 ] this is counteracted by a competing contraction of the pore with increasing temperature as a result of the anisotropic lattice response.
RESUMO
The mechanism of capacity fade of the Li2MnO3·LiMO2 (M = Li, Ni, Co, Mn) composite positive electrode within a full cell was investigated using a combination of operando neutron powder diffraction and transmission X-ray microscopy methods, enabling the phase, crystallographic, and morphological evolution of the material during electrochemical cycling to be understood. The electrode was shown to initially consist of 73(1) wt % R3Ì m LiMO2 with the remaining 27(1) wt % C2/m Li2MnO3 likely existing as an intergrowth. Cracking in the Li2MnO3·LiMO2 electrode particle under operando microscopy observation was revealed to be initiated by the solid-solution reaction of the LiMO2 phase on charge to 4.55 V vs Li(+)/Li and intensified during further charge to 4.7 V vs Li(+)/Li during the concurrent two-phase reaction of the LiMO2 phase, involving the largest lattice change of any phase, and oxygen evolution from the Li2MnO3 phase. Notably, significant healing of the generated cracks in the Li2MnO3·LiMO2 electrode particle occurred during subsequent lithiation on discharge, with this rehealing being principally associated with the solid-solution reaction of the LiMO2 phase. This work reveals that while it is the reduction of lattice size of electrode phases during charge that results in cracking of the Li2MnO3·LiMO2 electrode particle, with the extent of cracking correlated to the magnitude of the size change, crack healing is possible in the reverse solid-solution reaction occurring during discharge. Importantly, it is the phase separation during the two-phase reaction of the LiMO2 phase that prevents the complete healing of the electrode particle, leading to pulverization over extended cycling. This work points to the minimization of behavior leading to phase separation, such as two-phase and oxygen evolution, as a key strategy in preventing capacity fade of the electrode.
RESUMO
High-voltage spinel LiNi0.5Mn1.5O4 (LNMO) is considered a potential high-power-density positive electrode for lithium-ion batteries, however, it suffers from capacity decay after extended charge-discharge cycling, severely hindering commercial application. Capacity fade is thought to occur through the significant volume change of the LNMO electrode occurring on cycling, and in this work we use operando neutron powder diffraction to compare the structural evolution of the LNMO electrode in an as-assembled 18650-type battery containing a Li4Ti5O12 negative electrode with that in an identical battery following 1000 cycles at high-current. We reveal that the capacity reduction in the battery post cycling is directly proportional to the reduction in the maximum change of the LNMO lattice parameter during its evolution. This is correlated to a corresponding reduction in the MnO6 octahedral distortion in the spinel structure in the cycled battery. Further, we find that the rate of lattice evolution, which reflects the rate of lithium insertion and removal, is â¼9 and â¼10% slower in the cycled than in the as-assembled battery during the Ni(2+)/Ni(3+) and Ni(3+)/Ni(4+) transitions, respectively.
RESUMO
The development of cathode materials with high capacity and cycle stability is essential to emerging electric-vehicle technologies, however, of serious environmental concern is that materials with these properties developed so far contain the toxic and expensive Co. We report here the Li-rich, Co-free Li1+xMO2 (M = Li, Ni, Mn, Fe) composite cathode material, prepared via a template-free, one-step wet-chemical method followed by conventional annealing in an oxygen atmosphere. The cathode has an unprecedented level of cation mixing, where the electrochemically-active component contains four elements at the transition-metal (3a) site and 20% Ni at the active Li site (3b). We find Ni(2+)/Ni(3+)/Ni(4+) to be the active redox-center of the cathode with lithiation/delithiation occurring via a solid-solution reaction where the lattice responds approximately linearly with cycling, differing to that observed for iso-structural commercial cathodes with a lower level of cation mixing. The composite cathode has â¼75% active material and delivers an initial discharge-capacity of â¼103 mA h g(-1) with a reasonable capacity retention of â¼84.4% after 100 cycles. Notably, the electrochemically-active component possesses a capacity of â¼139 mA h g(-1), approaching that of the commercialized LiCoO2 and Li(Ni1/3Mn1/3Co1/3)O2 materials. Importantly, our operando neutron powder-diffraction results suggest excellent structural stability of this active component, which exhibits â¼80% less change in its stacking-axis than for LiCoO2 with approximately the same capacity, a characteristic that may be exploited to enhance significantly the capacity retention of this and similar materials.
RESUMO
Metal-organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu3(btb)2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE.
RESUMO
We report the magnetic structure of the two magnetically ordered phases of Co3(OH)2(C4O4)2, a coordination polymer that consists of a triangular framework decorated with anisotropic Co(II) ions. Neutron diffraction experiments allow us to confirm that the magnetic behavior changes upon dehydration and reveal the complex phase behavior of this system, relative to the hydrated compound Co3(OH)2(C4O4)2·3H2O. One phase is shown to display spin idle behavior, where only a fraction of the moments order at intermediate temperatures, while at the lowest temperatures the system orders fully, in this case with a net magnetic moment. This novel magnetic behavior is discussed within the framework of a simple Hamiltonian and representational analysis and rationalizes this multiphase behavior by considering the combination of frustration and anisotropy. The change in behavior on dehydration is also rationalized with respect to the changes in the single-ion anisotropy of the cobalt.
RESUMO
High-entropy oxides (HEOs) have aroused growing interest due to fundamental questions relating to their structure formation, phase stability, and the interplay between configurational disorder and physical and chemical properties. Introducing Fe(II) and Mn(II) into a rocksalt HEO is considered challenging, as theoretical analysis suggests that they are unstable in this structure under ambient conditions. Here, we develop a bottom-up method for synthesizing Mn- and Fe-containing rocksalt HEO (FeO-HEO). We present a comprehensive investigation of its crystal structure and the random cation-site occupancy. We show the improved structural robustness of this FeO-HEO and verify the viability of an oxygen sublattice as a buffer layer. Compositional analysis reveals the valence and spin state of the iron species. We further report the antiferromagnetic order of this FeO-HEO below the transition temperature ~218 K and predict the conditions of phase stability of Mn- and Fe-containing HEOs. Our results provide fresh insights into the design and property tailoring of emerging classes of HEOs.
RESUMO
Lithium-ion batteries power many portable devices and in the future are likely to play a significant role in sustainable-energy systems for transportation and the electrical grid. LiFePO(4) is a candidate cathode material for second-generation lithium-ion batteries, bringing a high rate capability to this technology. LiFePO(4) functions as a cathode where delithiation occurs via either a solid-solution or a two-phase mechanism, the pathway taken being influenced by sample preparation and electrochemical conditions. The details of the delithiation pathway and the relationship between the two-phase and solid-solution reactions remain controversial. Here we report, using real-time in situ neutron powder diffraction, the simultaneous occurrence of solid-solution and two-phase reactions after deep discharge in nonequilibrium conditions. This work is an example of the experimental investigation of nonequilibrium states in a commercially available LiFePO(4) cathode and reveals the concurrent occurrence of and transition between the solid-solution and two-phase reactions.
RESUMO
Because of its stability, nanosized olivine LiFePO(4) opens the door toward high-power Li-ion battery technology for large-scale applications as required for plug-in hybrid vehicles. Here, we reveal that the thermodynamics of first-order phase transitions in nanoinsertion materials is distinctly different from bulk materials as demonstrated by the decreasing miscibility gap that appears to be strongly dependent on the overall composition in LiFePO(4). In contrast to our common thermodynamic knowledge, that dictates solubility limits to be independent of the overall composition, combined neutron and X-ray diffraction reveals strongly varying solubility limits below particle sizes of 35 nm. A rationale is found based on modeling of the diffuse interface. Size confinement of the lithium concentration gradient, which exists at the phase boundary, competes with the in bulk energetically favorable compositions. Consequently, temperature and size diagrams of nanomaterials require complete reconsideration, being strongly dependent on the overall composition. This is vital knowledge for the future nanoarchitecturing of superior energy storage devices as the performance will heavily depend on the disclosed nanoionic properties.
RESUMO
The air-free reaction between FeCl(2) and H(4)dobdc (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) in a mixture of N,N-dimethylformamide (DMF) and methanol affords Fe(2)(dobdc)·4DMF, a metal-organic framework adopting the MOF-74 (or CPO-27) structure type. The desolvated form of this material displays a Brunauer-Emmett-Teller (BET) surface area of 1360 m(2)/g and features a hexagonal array of one-dimensional channels lined with coordinatively unsaturated Fe(II) centers. Gas adsorption isotherms at 298 K indicate that Fe(2)(dobdc) binds O(2) preferentially over N(2), with an irreversible capacity of 9.3 wt %, corresponding to the adsorption of one O(2) molecule per two iron centers. Remarkably, at 211 K, O(2) uptake is fully reversible and the capacity increases to 18.2 wt %, corresponding to the adsorption of one O(2) molecule per iron center. Mössbauer and infrared spectra are consistent with partial charge transfer from iron(II) to O(2) at low temperature and complete charge transfer to form iron(III) and O(2)(2-) at room temperature. The results of Rietveld analyses of powder neutron diffraction data (4 K) confirm this interpretation, revealing O(2) bound to iron in a symmetric side-on mode with d(O-O) = 1.25(1) Å at low temperature and in a slipped side-on mode with d(O-O) = 1.6(1) Å when oxidized at room temperature. Application of ideal adsorbed solution theory in simulating breakthrough curves shows Fe(2)(dobdc) to be a promising material for the separation of O(2) from air at temperatures well above those currently employed in industrial settings.
RESUMO
There are five filter-analyzer neutron spectrometers available worldwide for scientists to use in order to measure the vibrational density of states in various samples. While Taipan, the thermal spectrometer, has been operated as a triple-axis spectrometer at the Australian Centre for Neutron Scattering since 2010, a beryllium filter analyzer spectrometer was added in 2016. Due to the complex nature of the data post-processing, it has thus far been impossible to fully treat experimental data from scientific measurements taken over the last five years. We have successfully created a robust method of treating data from the Taipan filter-analyzer and present the method on three different samples. The data-treatment process includes correction for the non-linear energy variation of a particular monochromator, removal of higher-order wavelength contamination, and estimation of low-energy multiple-scattering. The steps described here can be utilized by all users of the Australian Nuclear Science and Technology Organisation "Be-filter"-past, present, and future.
RESUMO
An extended nitro-functionalised 1,2,4-triazole ligand has been used to induce considerable lattice distortion in a 2-D Hofmann framework material via competing supramolecular interactions. Single crystal X-ray diffraction analyses on [Fe3(N-cintrz)6(Pd(CN)4)3]·6H2O (N-cintrz: (E)-3-(2-nitrophenyl)acrylaldehyde) reveal a substantial deviation from a regular Hofmann structure, in particular as the intra- and inter-layer contacts are dominated by hydrogen-bonding interactions rather than the typical π-stacking arrays. Also, the 2-D Hofmann layers show an assortment of ligand conformations and local FeII coordination environments driven by the optimisation of competing supramolecular contacts. Temperature-dependent magnetic susceptibility measurements reveal a two-step spin crossover (SCO) transition. Variable temperature structural analyses show that the two crystallographically distinct FeII centres, which are arranged in stripes (2 : 1 ratio) within each Hofmann layer, undergo a cooperative HS â HS/LS â LS (HS = high spin, LS = low spin) transition without periodic spin-state ordering. The mismatch between crystallographic (2 : 1) and spin-state (1 : 1) periodicity at the HS : LS step provides key insight into the competition (frustration) between elastic interactions and crystallographically driven order.