Evaluation of the Milled and Three-Dimensional Digital Manufacturing, 10-Degree and 20-Degree Preparation Taper, Groove and Box Auxiliary Retentive Features, and Conventional and Resin-Based Provisional Cement Type on the Adhesive Failure Stress of 3 mm Short Provisional Crowns.

BACKGROUND This study evaluated the effects of milling (CADCAM), 3D printing, preparation taper angles (10-degree and 20-degree), auxiliary retentive features (groove and box), and provisional cement types (conventional and resin-based) on the adhesive failure stress of 3-mm short provisional crowns (PC). The research was motivated by the need to understand how digital dentistry technologies impact the retention and durability of provisional crowns. MATERIAL AND METHODS A total of 160 working models (3D-printed) and PCs [80 milled (CopraTemp)/80 printed (Asiga)] were fabricated from two 10- and 20-degree typodont master models and two 20-degree 3D-printed master models (groove and box), simulating a 3 mm high all-ceramic short PC. After provisional cementation with conventional (Kerr TempBond) and resin-based (ProviTemp) cements, 16 subgroups (n=10 each) underwent thermocycling (10 000 cycles; 5-55°C) and pull-off tests on a universal testing machine. Statistical analysis was performed using one-way ANOVA and post hoc Tukey test. RESULTS Conventional cement failed at lower stress for milled (47.68 to 73.54) and printed (48.40 to 77.91) as compared to resin cement for milled (104.2 to 137.27) and printed (184.85 to 328.84), respectively, with significant differences. Increased taper and groove decreased failure load except for the printed PC/resin cement combination. Use of proximal box preparation increased retention significantly. Except for 20-degree taper cemented with conventional cement, the differences in auxiliary retentive features for milled and printed provisional crowns were statistically significant at P≤0.05. CONCLUSIONS 3D-printed PC, resin-based cement, 10-degree taper, and proximal box preparation were associated with higher retention than milled, conventional cements, 20-degree taper, and vertical groove.

Gene sequencing applications to combat oral-cavity related disorders: a systematic review with meta-analysis.

Gene sequencing (GS) has numerous applications in combatting oral-cavity related disorders, including identifying genetic risk factors for diseases, developing targeted therapies, and improving diagnostic methods. It can help identify specific genetic mutations or variations that increase the risk of developing oral-cavity related disorders, such as oral cancer, periodontal disease, and cleft lip and palate. By the means of the following investigation, our primary objective was to assess the impact of GS technique in diagnosing and potentially treating diseases of the oral cavity by the means of a systematic review and meta-analysis. We commenced by defining the terms "gene sequencing," "oral cavity," and "disorders" as the important elements in our investigation's subject. Next, relevant databases like PubMed, Scopus, Embase, Web of Science, and Google Scholar were searched using keywords and synonyms for each concept, such as "genomic sequencing," "DNA sequencing," "oral health," "oral diseases," "dental caries," "periodontal disease," "oral cancer," and "salivary gland disorders." We combined several search terms, such as "gene sequencing AND oral disorders AND periodontal disease" or "oral cancer OR genomic sequencing," to further hone your search results using Boolean operators like "AND" and "OR." The oral cavity analysis obtained by CS in the selected articles revealed that most of the disorders were, in fact, a direct causal event influenced by the oral microbiome. Moreover, each sampled oral cavity evidenced a different microbial community, which predicted the precipitation of benign as well as malignant conditions, though not on a definitive basis. In the last ten years, genomic sequencing had advanced remarkably as majority of our selected studies observed, making it possible to diagnose and treat a variety of oral and maxillofacial disorders, including cancer. It was also used to ascertain a person's genetic make-up as well as to spot numerous genetic abnormalities that can predispose individuals to diseases. Understanding the different sequencing techniques and the resulting genetic anomalies may help with their clinical application and lead to an improvement in illness diagnosis and prognosis as a whole in the field of dentistry.

Sideways propelled bimetallic rods at the water/oil interface.

The motion of self-propelling microswimmers is significantly affected by confinement, which can enhance or reduce their mobility and also steer the direction of their propulsion. While their interactions with solid boundaries have already received considerable attention, many aspects of the influence of liquid-liquid interfaces (LLI) on active particle propulsion still remain unexplored. In this work, we studied the adsorption and motion of bimetallic Janus sideways propelled rods dispersed at the interface between an aqueous solution of hydrogen peroxide and oil. The wetting properties of the bimetallic rods result in a wide distribution of their velocities at the LLI. While a fraction of rods remain immotile, we note a significant enhancement of motility for the rest of the particles with velocities of up to 8 times higher in comparison to those observed near a solid wall. Liquid-liquid interfaces, therefore, can provide a new way to regulate the propulsion of bimetallic particles.

Developing High-Performance In-Plane Flexible Aqueous Zinc-Ion Batteries with Laser-Scribed Carbon-Supported All Electrodeposited Electrodes.

Developing high-performance, safer, and affordable flexible batteries is of urgent need to power the fast-growing flexible electronics market. In this respect, zinc-ion chemistry employing aqueous-based electrolytes represents a promising combination considering the safety, cost efficiency, and both high energy and high-power output. Herein, we represent a high-performance flexible in-plane aqueous zinc-ion miniaturized battery constructed with all electrodeposited electrodes, i.e., MnO2 cathode and zinc anode with polyimide-derived interdigital patterned laser-scribed carbon (LSC) as the current collector as well as the template for electrodeposition. The LSC possesses a cross-linked network of graphitic carbon sheet, which offers large surface area over low footprint and ensures active materials loading with a robust conductive network. The LSC with high zincophilic characteristic also offers dendrite-free zinc deposition with very low Zn2+ plating stripping overpotential. Benefitting from the Zn//MnO2-rich redox chemistry, the ability of the 3D LSC network to uniformly distribute reaction sites, and the architectural merits of in-plane interdigitated electrode configuration, we report very high capacity values of ∼549 mAh/g (or ∼523 µAh/cm2) and 148 mAh/g (or 140 µAh/cm2) at 0.1 A/g (0.095 mA/cm2) and 2 A/g (1.9 mA/cm2) currents, respectively. The device was also able to maintain a high capacity of 196 mAh/g (areal capacity of 76.19 µAh/cm2) at 1 A/g (0.95 mA/cm2) current after 1350 cycles. The flexibility of the device was demonstrated in polyacryl amide (PAM) gel polymer soaked with a 2 M ZnSO4 and 0.2 M MnSO4 electrolyte, which exhibited a comparable specific capacity of ∼102-110 mAh/g in flat condition and different bending (100° or 160° bending) conditions. The device does not use any conventional current collector, separator, and conductive or polymer additives. The overall process is highly scalable and can be completed in less than a couple of hours.

A massive, quiescent, population II galaxy at a redshift of 2.1.

Unlike spiral galaxies such as the Milky Way, the majority of the stars in massive elliptical galaxies were formed in a short period early in the history of the Universe. The duration of this formation period can be measured using the ratio of magnesium to iron abundance ([Mg/Fe]) in spectra, which reflects the relative enrichment by core-collapse and type Ia supernovae. For local galaxies, [Mg/Fe] probes the combined formation history of all stars currently in the galaxy, including younger and metal-poor stars that were added during late-time mergers. Therefore, to directly constrain the initial star-formation period, we must study galaxies at earlier epochs. The most distant galaxy for which [Mg/Fe] had previously been measured is at a redshift of z ≈ 1.4, with [Mg/Fe] = . A slightly earlier epoch (z ≈ 1.6) was probed by combining the spectra of 24 massive quiescent galaxies, yielding an average [Mg/Fe] = 0.31 ± 0.12 (ref. 7). However, the relatively low signal-to-noise ratio of the data and the use of index analysis techniques for both of these studies resulted in measurement errors that are too large to allow us to form strong conclusions. Deeper spectra at even earlier epochs in combination with analysis techniques based on full spectral fitting are required to precisely measure the abundance pattern shortly after the major star-forming phase (z > 2). Here we report a measurement of [Mg/Fe] for a massive quiescent galaxy at a redshift of z = 2.1, when the Universe was three billion years old. With [Mg/Fe] = 0.59 ± 0.11, this galaxy is the most Mg-enhanced massive galaxy found so far, having twice the Mg enhancement of similar-mass galaxies today. The abundance pattern of the galaxy is consistent with enrichment exclusively by core-collapse supernovae and with a star-formation timescale of 0.1 to 0.5 billion years-characteristics that are similar to population II stars in the Milky Way. With an average past star-formation rate of 600 to 3,000 solar masses per year, this galaxy was among the most vigorous star-forming galaxies in the Universe.

A clinical experience of thulium fibre laser in miniperc to dust with suction: a new horizon.

PURPOSE: To report safety and efficacy of mini-PCNL with suction attached to sheath combined with high-power Thulium Fibre laser (TFL). The secondary aim was to evaluate optimal laser settings for maximum stone dusting. MATERIALS AND METHODS: Prospective, single arm study was conducted from June 2019-December 2019 using miniPCNL with suction and TFL in 54 patients with renal stones < 3 cm. Stone fragments for each laser setting were independently retrieved and segregated according to size(< 1 mm,1-3 mm, > 3 mm) and weighed. Xray/CT scan imaging was performed in all patients within 48 h and 30 days to assess stone clearance. Optimal laser settings were evaluated for maximum dusting. RESULTS: Mean stone size was 18.32 ± 6.37 mm, volume was 2337.75 ± 1996.84mm3 and stone density was 1300.55 ± 435.32 HU. Total operative time was 39.85 ± 20.52 min, laser time was 10.08 ± 7.41 min and stone fragmentation rate was 5.02 ± 3.93 mm3/s. The procedure was completely tubeless in 37.04%, nephrostomy tube in 37.04% and DJ stent placed in 25.92%. Postoperatively, three patients had urinary infection (Clavien 2). Complete stone clearance at 48 h was achieved in 35 (64.8%) cases. 19 patients (35.2%) who had residual fragments at 48 h, had 100% clearance at one month on CT/Xray KUB. CONCLUSIONS: MiniPCNL using a nephrostomy sheath with suction along with high power Thulium Fibre Laser is safe and effective modality for lithotripsy. An initial laser setting of 0.2 J and 125-200 Hz was optimal for maximum dusting and simultaneous aspiration. Randomized comparative studies with other energy sources are being considered.

'Sweeping rods': cargo transport by self-propelled bimetallic microrods moving perpendicular to their long axis.

A possible application of self-propelling particles is the transport of microscopic cargo. Maximizing the collection and transport efficiency of particulate matter requires the area swept by the moving particle to be as large as possible. One such particle geometry are rods propelled perpendicular to their long axis, that act as "sweepers" for collecting particles. Here we report on the required Janus coating to achieve such motion, and on the dynamics of the collection and transport of microscopic cargo by sideways propelled Janus rods.

Size Distribution of Fragments by High-power Holmium Laser Lithotripsy in MiniPCNL with Suction.

PURPOSE OF REVIEW: Data are lacking on distribution of size of fragments created with the laser lithotripsy, stone density, and composition. Dust (< 1 mm) and small fragments (1-3 mm) may be too small to be efficiently removed with forceps compared to larger fragments (> 3 mm). We aim to report the size distribution of fragments formed during holmium laser lithotripsy. RECENT FINDINGS: One hundred ten patients with renal calculi < 3 cm underwent miniPCNL using ClearPetra sheath (Well Lead Medical Co., China) with controllable irrigation and suction system that minimizes fragment dispersion and maximizes fragment aspiration. Moses holmium laser (Lumenis INC, Israel) was used with predefined laser energy settings for lithotripsy. Proportion of fragment size < 1 mm was 46.36 ± 16.68%, 1-3 mm was 28.18 ± 10.01%, and > 3 mm was 25.19 ± 16.18% for the entire cohort. Complete stone clearance at 48 h was achieved in 77.3% cases. The remaining 22.7% patients had complete clearance at 1-month follow-up CT. In all the stone density, volume, and composition groups, majority of fragments created were either < 1 mm or 1-3 mm. Only 25% fragments were > 3 mm that would get aspirated out through the sheath with suction or could be retrieved with forceps. The combination of a high-power holmium laser and suction would help in complete stone clearance with effective aspiration of smaller stone fragments and dust simultaneously during lasing.

The Transcriptional Regulator SnoN Promotes the Proliferation of Cerebellar Granule Neuron Precursors in the Postnatal Mouse Brain.

Control of neuronal precursor cell proliferation is essential for normal brain development, and deregulation of this fundamental developmental event contributes to brain diseases. Typically, neuronal precursor cell proliferation extends over long periods of time during brain development. However, how neuronal precursor proliferation is regulated in a temporally specific manner remains to be elucidated. Here, we report that conditional KO of the transcriptional regulator SnoN in cerebellar granule neuron precursors robustly inhibits the proliferation of these cells and promotes their cell cycle exit at later stages of cerebellar development in the postnatal male and female mouse brain. In laser capture microdissection followed by RNA-Seq, designed to profile gene expression specifically in the external granule layer of the cerebellum, we find that SnoN promotes the expression of cell proliferation genes and concomitantly represses differentiation genes in granule neuron precursors in vivo Remarkably, bioinformatics analyses reveal that SnoN-regulated genes contain binding sites for the transcription factors N-myc and Pax6, which promote the proliferation and differentiation of granule neuron precursors, respectively. Accordingly, we uncover novel physical interactions of SnoN with N-myc and Pax6 in cells. In behavior analyses, conditional KO of SnoN impairs cerebellar-dependent learning in a delayed eye-blink conditioning paradigm, suggesting that SnoN-regulation of granule neuron precursor proliferation bears functional consequences at the organismal level. Our findings define a novel function and mechanism for the major transcriptional regulator SnoN in the control of granule neuron precursor proliferation in the mammalian brain.SIGNIFICANCE STATEMENT This study reports the discovery that the transcriptional regulator SnoN plays a crucial role in the proliferation of cerebellar granule neuron precursors in the postnatal mouse brain. Conditional KO of SnoN in granule neuron precursors robustly inhibits the proliferation of these cells and promotes their cycle exit specifically at later stages of cerebellar development, with biological consequences of impaired cerebellar-dependent learning. Genomics and bioinformatics analyses reveal that SnoN promotes the expression of cell proliferation genes and concomitantly represses cell differentiation genes in vivo Although SnoN has been implicated in distinct aspects of the development of postmitotic neurons, this study identifies a novel function for SnoN in neuronal precursors in the mammalian brain.

Nonmonotonic Stress Relaxation after Cessation of Steady Shear Flow in Supramolecular Assemblies.

Stress relaxation upon cessation of shear flow is known to be described by single-mode or multimode monotonic exponential decays. This is considered to be ubiquitous in nature. However, we found that, in some cases, the relaxation becomes anomalous in that an increase in the relaxing stress is observed. Those observations were made for physicochemically very different systems, having in common, however, the presence of self-associating units generating structures at large length scales. The nonmonotonic stress relaxation can be described phenomenologically by a generic model based on a redistribution of energy after the flow has stopped. When broken bonds are reestablished after flow cessation, the released energy is partly used to locally increase the elastic energy by the formation of deformed domains. If shear has induced order such that these elastic domains are partly aligned, the reestablishing of bonds gives rise to an increase of the overall stress.

Effects of particle stiffness on the extensional rheology of model rod-like nanoparticle suspensions.

The linear and nonlinear rheological behavior of two rod-like particle suspensions as a function of concentration is studied using small amplitude oscillatory shear, steady shear and capillary breakup extensional rheometry. The rod-like suspensions are composed of fd virus and its mutant fdY21M, which are perfectly monodisperse, with a length on the order of 900 nm. The particles are semiflexible yet differ in their persistence length. The effect of stiffness on the rheological behavior in both, shear and extensional flow, is investigated experimentally. The linear viscoelastic shear data is compared in detail with theoretical predictions for worm-like chains. The extensional properties are compared to Batchelor's theory, generalized for the shear thinning nature of the suspensions. Theoretical predictions agree well with the measured complex moduli at low concentrations as well as the nonlinear shear and elongational viscosities at high flow rates. The results in this work provide guidelines for enhancing the elongational viscosity based on purely frictional effects in the absence of strong normal forces which are characteristic for high molecular weight polymers.

Rheo-optical Analysis of Functionalized Graphene Suspensions.

Wet processing of graphene sheets is a potentially interesting route for the economically viable creation of graphene-based composites. In the present work, flow dichroism and small-angle light scattering are used to investigate the dispersion of functionalized graphene sheets in a suspension and their response to shear flow. In line with expectations from scaling theory at rest, the functionalized graphene sheets are present as Brownian flat sheets, and there is no evidence of significant crumpling. More surprisingly, we find that the rate-dependent orientation of these molecularly thin sheets can be described by numerical predictions for hard spheroidal sheets, making quantitative predictions of the flow-induced orientation possible. Further comparison of the flow-induced orientation of thick gold decahedra with the thin graphene sheets shows that, except for effects of polydispersity, the flow-induced orientation is predicted well quantitatively. Adequate prediction of the effects of flow on the orientation of graphene sheets makes it possible to design wet processed graphene-based composite materials.

Tumbling of Quantum Dots: Rheo-Optics.

Linear flow dichroism is shown to be a powerful tool to characterize the hydrodynamic dimensions of extremely small nonspherical colloids in solution. Dispersions of prolate and oblate quantum dots (QDs) are employed to investigate the validity of flow dichroism as a characterization tool. Shape-anisotropic QDs are important from an application perspective, where it is necessary to have a good knowledge of their hydrodynamic dimensions to predict and control their orientation during solution processing. Flow dichroism quantifies the tumbling motion of QDs in shear flow by optical means, which provides a characteristic signature of the particle shape, hydrodynamic friction, and size distribution. The effects of particle size and shape, size polydispersity, and shear rate on the temporal evolution of the flow-induced alignment are discussed in detail on the basis of numerical solutions of the Smoluchowski equation that describes the motion for the probability of the orientation of colloids in shear flow. It is shown that the combination of flow-dichroism experiments and the theoretical approach on the basis of the Smoluchowski equation provides a means to measure hydrodynamic aspect ratios and polydispersity, which for such small particles is not feasible with standard methods similar to light scattering. Flow dichroism will be useful not only for shape-anisotropic colloidal QDs, but also for other nanoscale systems.

High velocity dispersion in a rare grand-design spiral galaxy at redshift z = 2.18.

Although grand-design spiral galaxies are relatively common in the local Universe, only one has been spectroscopically confirmed to lie at redshift z > 2 (HDFX 28; z = 2.011); and it may prove to be a major merger that simply resembles a spiral in projection. The rarity of spirals has been explained as a result of disks being dynamically 'hot' at z > 2 (refs 2-5), which may instead favour the formation of commonly observed clumpy structures. Alternatively, current instrumentation may simply not be sensitive enough to detect spiral structures comparable to those in the modern Universe. At z < 2, the velocity dispersion of disks decreases, and spiral galaxies are more numerous by z ≈ 1 (refs 7, 13-15). Here we report observations of the grand-design spiral galaxy Q2343-BX442 at z = 2.18. Spectroscopy of ionized gas shows that the disk is dynamically hot, implying an uncertain origin for the spiral structure. The kinematics of the galaxy are consistent with a thick disk undergoing a minor merger, which can drive the formation of short-lived spiral structure. A duty cycle of <100 Myr for such tidally induced spiral structure in a hot massive disk is consistent with its rarity.

Case of Hallervorden-Spatz Syndrome: A Tale of Twin Sisters.

Hallervorden-Spatz syndrome, now known as pantothenate kinase-associated neurodegeneration (PKAN), is a rare autosomal recessive disorder that is characterized by cerebral iron deposition and leads to progressive extrapyramidal dysfunction and dementia. Most commonly seen in the first two decades of a person's life, it is a differential for patients presenting with atypical progressive extrapyramidal disorder and cognitive impairment. It is characterized by progressive degeneration of the basal ganglia, globus pallidus, and the reticular part of the substantia nigra due to iron accumulation. The characteristic MRI brain pattern of the disease shows the eye-of-the-tiger sign. We report cases of early onset PKAN in two sisters of the same family, in which diagnosis was based on clinical features, lab parameters, and MRI imaging findings. This report aims to differentiate PKAN from other static and progressive neurological illnesses.

Brain Abscess Secondary to Streptococcus Intermedius Following an EGD with Biopsy in a Patient with Eosinophilic Esophagitis.

Brain abscess is a rare complication of esophagogastro- duodenoscopy (EGD) with few reported cases in the literature. In this report, we discuss a patient presenting with altered mental status, headache, and dysarthria due to brain abscess caused by S. intermedius shortly after an EGD with an esophageal biopsy showing a new diagnosis of eosinophilic esophagitis. We highlight the rare association of EGD and brain abscess, and discuss the importance of prompt diagnosis and treatment.

Clinical and CBCT Assessment of Role of Bisphosphonate on Osteotomy Site and Implant Surface.

Objectives: To assess the role of bisphosphonate on osteotomy site and implant surface. Materials and Methods: Twenty patients with adequate width and height of edentulous space and a single missing posterior tooth between the ages of 25 and 55 were incorporated in this research. Ten participants received implant therapy alone; the other ten patients received implant therapy and bisphosphonate application to osteotomy site and the implant surface. Result: Changes in the crestal bone level were seen in both the study and control groups. At 1 year, crestal bone loss was less in the bisphosphonate-treated group than in the control group. Conclusion: The quantity of crestal bone loss was reduced when bisphosphonate (sodium alendronate) was applied locally near the implant and osteotomy site.

Estimation of Loss of Crestal Bone Around Dental Implants in Various Tissue Biotypes Using CBCT.

Objectives: To evaluate the loss of crestal bone height around dental implants placed in various tissue biotypes. Materials and Methods: 20 patients with single edentulous sites were allocated randomly, with 10 samples in each into Group I (implants were placed in thick tissue biotype) and Group II (implants were placed in thin tissue biotype). Baseline cone-beam computed tomography (CBCT) was performed after implant placement in both groups, and follow-up CBCT was taken at the time of cementation prior to occlusal loading to assess the crestal bone loss around the mesial and distal side of implants in both groups. Result: A significant loss of crestal bone at both the distal and mesial sides of the implants at the time of cementation was observed in both groups but Group II showed more crestal bone loss as compared to Group I. Conclusion: Mean crestal bone loss was more in Group II (thin tissue biotype) in comparison to Group I (thick tissue biotype). The thick biotype causes less crestal bone changes than the thin biotype, which evokes more loss of crestal bone during the period of peri-implant healing.

Efficacy, Safety, Pharmacokinetics, and Immunogenicity of DRL-Trastuzumab Versus Herceptin in Human Epidermal Growth Factor Receptor 2-Positive Metastatic Breast Cancer: A Randomized Controlled Trial.

PURPOSE: Dr Reddy's Laboratories Trastuzumab (DRL_TZ) is a biosimilar to Herceptin under development. The present study was conducted to evaluate efficacy, safety, pharmacokinetics (PKs), and immunogenicity of DRL_TZ in comparison with the reference medicinal product (RMP) along with concomitant weekly paclitaxel in patients with human epidermal growth factor receptor 2 (HER2)-positive metastatic breast cancer (MBC). METHODS: This was a randomized, double-blind study in female patients with HER2-positive MBC, randomly assigned in a 1:1 ratio to receive either DRL_TZ or the RMP, that is, an innovator product sourced from the European region, along with additional chemotherapy, as first-line treatment for up to 24 weeks. The primary end point was the best overall response rate (ORR) as per RECIST 1.1 criteria. Progression-free survival rate at 6 months (PFS6), safety, immunogenicity, and PK parameters were assessed as secondary end points. RESULTS: A total of 164 patients were randomly assigned to receive either DRL_TZ or the RMP. Best ORR in the per-protocol population was comparable, 91.9% (93.3% CI, 83.2 to 96.3) versus 82.1% (93.3% CI, 72.0 to 89.1) in DRL_TZ and RMP arms, respectively; the difference between the arms was 9.8% with a 93.3% CI of -1.3 to 20.8. The PFS6 rate, safety, PK profile, and antidrug antibody incidence were comparable. An additional 44 patients were recruited in the postrandomization phase, in an open-label manner, and started on DRL_TZ to generate more data on efficacy, safety, and immunogenicity. The additional data with DRL_TZ, when pooled, were similar to the RMP data. CONCLUSION: DRL_TZ was found to have similar efficacy and comparable safety, PK, and immunogenicity profiles as the RMP.

Msx1 Gene Variant - its Association in Isolated Hypodontia: A Case Control Genetic study!!!

INTRODUCTION: Non-syndromic tooth agenesis is a congenital anomaly with significant medical, psychological, and social ramifications. There is sufficient evidence to hypothesize that locus for this condition can be identified by candidate genes. AIM OF THE STUDY: The aim of this study was to test whether MSX1 671 T > C gene variant was involved in etiology of non-syndromic tooth agenesis in Raichur patients. MATERIALS AND METHODS: Blood samples were collected with informed consent from 50 subjects having non-syndromic tooth agenesis and 50 controls. Genomic deoxyribonucleic acid (DNA) was extracted from the blood samples, polymerase chain reaction (PCR) was performed, and restriction fragment length polymorphism (RFLP) was performed for digestion products that were evaluated. RESULTS: The results showed positive correlation between MSX1671 T > C gene variant and non-syndromic tooth agenesis in Raichur patients. CONCLUSION: MSX1 671 T > C gene variant may be a good screening marker for non-syndromic tooth agenesis in Raichur patients.