Double-cavity cucurbiturils: synthesis, structures, properties, and applications.

Double-cavity Q[n]s are relatively new members of the Q[n] family and have garnered significant interest due to their distinctive structures and novel properties. While they incorporate n glycoluril units, akin to their single-cavity counterparts, their geometry can best be described as resembling a figure-of-eight or a handcuff, distinguishing them from single-cavity Q[n]s. Despite retaining the core molecular recognition traits of single-cavity Q[n]s, these double-cavity variants introduce fascinating new attributes rooted in their distinct configurations. This overview delves into the synthesis, structural attributes, properties, and intriguing applications of double-cavity Q[n]s. Some of the applications explored include their role in supramolecular polymers, molecular machinery, supra-amphiphiles, sensors, artificial light-harvesting systems, and adsorptive separation materials. Upon concluding this review, we discuss potential challenges and avenues for future development and offer valuable insights for other scholars working in this area with the aim of stimulating further exploration and interest.

In Situ Photogenerated Radicals of Hydroxyl Substituted Pyrene-Based Triphenylamines with Enhanced Transport and Free Doping/Post-Oxidation for Efficient Perovskite Solar Cells.

The high-performance hole transporting material (HTM) is one of the most important components for the perovskite solar cells (PSCs) in promoting power conversion efficiency (PCE). However, the low conductivity of HTMs and their additional requirements for doping and post-oxidation greatly limits the device performance. In this work, three novel pyrene-based derivatives containing methoxy-substituted triphenylamines units (PyTPA, PyTPA-OH and PyTPA-2OH) are designed and synthesized, where different numbers of hydroxyl groups are connected at the 2- or 2,7-positions of the pyrene core. These hydroxyl groups at the 2- or 2,7-positions of pyrene play a significantly role to enhance the intermolecular interactions that are able to generate in situ radicals with the assistance of visible light irradiation, resulting in enhanced hole transferring ability, as well as an enhanced conductivity and suppressed recombination. These pyrene-core based HTMs exhibit excellent performance in PSCs, which possess a higher PCE than those control devices using the traditional spiro-OMeTAD as the HTM. The best performance can be found in the devices with PyTPA-2OH. It has an average PCE of 23.44% (PCEmax = 23.50%), which is the highest PCE among the reported PSCs with the pyrene-core based HTMs up to date. This research offers a novel avenue to design a dopant-free HTM by the combination of the pyrene core, methoxy triphenylamines, and hydroxy groups.

Phenanthrothiophene-Triazine Star-Shaped Discotic Liquid Crystals: Synthesis, Self-Assembly, and Stimuli-Responsive Fluorescence Properties.

Lipophilic biphenylthiophene- and phenanthrothiophene-triazine compounds, BPTTn and CPTTn, respectively, were prepared by a tandem procedure involving successive Suzuki-Miyaura coupling and Scholl cyclodehydrogenation reactions. These compounds display photoluminescence in solution and in thin film state, solvatochromism with increasing solvent's polarity, as well as acidochromism and metal ion recognition stimuli-responsive fluorescence. Protonation of BPTT10 and CPTT10 by trifluoroacetic acid results in fluorescence quenching, which is reversibly restored once treated with triethylamine (ON-OFF switch). DFT computational studies show that intramolecular charge transfer (ICT) phenomena occurs for both molecules, and reveal that protonation enhances the electron-withdrawing ability of the triazine core and reduces the band gap. This acidochromic behavior was applied to a prototype fluorescent anti-counterfeiting device. They also specifically recognize Fe3+ through coordination, and the recognition mechanism is closely related to the photoinduced electron transfer between Fe3+ and BPTT10/CPTT10. CPTTn self-assemble into columnar rectangular (Colrec) mesophase, which can be modulated by oleic acid via the formation of a hydrogen-bonded supramolecular liquid crystal hexagonal Colhex mesophase. Finally, CPTTn also form organic gels in alkanes at low critical gel concentration (3.0 mg/mL). Therefore, these star-shaped triazine molecules possess many interesting features and thus hold great promises for information processing, liquid crystal semiconductors and organogelators.

Double Cross-Linked Hydrogel Dressings Based on Triblock Copolymers Bearing Antifreezing, Antidrying, and Inherent Antibacterial Properties.

Bacterial infections typically invade the living tissue of wounds, thereby aggravating the inflammatory response, delaying wound healing, or causing further complications. In this paper, the antibacterial hydrogel (PNVBA) with antifreezing and antidrying properties was prepared by a two-step method using N-isopropylacrylamide (NIPAM), 1-butyl-3-vinylimidazolium bromide (VBIMBr), and 3-acrylamidophenylboronic acid (AAPBA). PNVBA hydrogels exhibited a high adsorption capacity of 280 mg·g-1 for bovine serum albumin (BSA) and can adhere to the surface of different materials through ion-dipole or hydrogen-bonding interactions. Meanwhile, the PNVBA hydrogels exhibited high viscoelasticity and good adhesion after freezing at -20 °C or heating at 70 °C for 24 h with a sterilizing rate of up to 98% against multidrug-resistant (MDR) Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA). Moreover, a survival rate of up to 90% after incubation with L929 cells over 24 h was observed. Therefore, this inherent antibacterial hydrogel can be used as an excellent alternative material for wound dressings.

Influence of Steric Effects on the Emission Behavior of Pyrene-Based Blue Luminogens.

Pyrene-based derivatives have been widely deployed in organic luminescent materials because of their bright fluorescence, high charge carrier mobility, and facile modification. Nevertheless, the fluorescence output of conventional pyrenes is prone to quenching upon aggregation due to extensive intermolecular π-π stacking interactions. To address this issue, a set of new Y-shaped pyrene-containing luminogens are synthesized from a new bromopyrene chemical precursor, 2-hydroxyl-7-tert-butyl-1,3-bromopyrene, where the bromo and hydroxyl groups at the pyrene core can be readily modified to obtain the target products and provide great flexibility in tuning the photophysical performances. When the hydroxy group at the 2-position of pyrene was replaced by a benzyl group, the steric hindrance of the benzyl group not only efficiently inhibits the detrimental intermolecular π-π stacking interactions but also rigidifies the molecular conformation, resulting in a narrow-band blue emission. Moreover, the TPE-containing compounds 2c and 3c possessed characteristic aggregation-induced emission (AIE) properties with fluorescence quantum yields of up to 66% and 38% in the solid state, respectively. Thus, this article has methodically investigated the factors influencing the optical behavior, such as intermolecular interactions, and the steric effects of the substituent group, thereby opening up the potential to develop narrow-band pyrene-based blue emitters for OLED device applications.

Pyrene-Based Deep-Blue Fluorophores with Narrow-Band Emission.

High-efficiency narrow-band luminescent materials have attracted intense interest, resulting in their great colorimetric purity. This has led to a variety of high-tech applications in high-definition displays, spectral analysis, and biomedicine. In this study, a rigid pyrene core was employed as the molecular backbone, and four narrow-band pyrene-based blue emitters were synthesized using various synthetic methods (such as Lewis-acid catalyzed cyclization domino reactions, Pd-catalyzed coupling reactions like Suzuki-Miyaura and Sonogashira). Due to the steric effect of the hydroxy group at the 2-position, the target compounds exhibit deep blue emission (<429 nm, CIEy < 0.08) with full width at half-maximum (FWHM) less than 33 nm both in solution and when solidified. The experimental and theoretical results indicated that the substituents at the 1- and 3-positions afford a large dihedral angle with the pyrene core, and the molecular motion is almost fixed by multiple intra- and intermolecular hydrogen bonding interactions in the crystallized state, leading to a suppression of the vibrational relaxation of the molecular structure. Moreover, we observed that the suppression of the vibrational relaxation in the molecular structures and the construction of rigid conjugated structures can help develop narrow-band organic light-emitting materials.

Stimuli-responsive mechanically interlocked molecules constructed from cucurbit[n]uril homologues and derivatives.

Cucurbit[n]uril supramolecular chemistry has developed rapidly since 2001 when different cucurbit[n]uril homologues (Q[n]) were successfully separated in pure form. The combination of Q[n] cavity size and various types of external stimuli has given birth to numerous types of Q[n]-based mechanically interlocked molecules (MIMs), including (pseudo)rotaxanes, catenanes, dendrimers and poly(pseudo)rotaxanes. In this review article, the important advances in the field of Q[n]-based MIMs over the past two decades are highlighted. This review also describes examples of heterowheel (pseudo)rotaxanes and poly(pseudo)rotaxanes involving Q[n]s, and reflects on the opportunities and challenges of constructing Q[n]-based stimuli-responsive MIMs.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application.

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

A Coumarin-Hemicyanine Deep Red Dye with a Large Stokes Shift for the Fluorescence Detection and Naked-Eye Recognition of Cyanide.

In this study, we synthesized a coumarin-hemicyanine-based deep red fluorescent dye that exhibits an intramolecular charge transfer (ICT). The probe had a large Stokes shift of 287 nm and a large molar absorption coefficient (ε = 7.5 × 105 L·mol-1·cm-1) and is best described as a deep red luminescent fluorescent probe with λem = 667 nm. The color of probe W changed significantly when it encountered cyanide ions (CN-). The absorption peak (585 nm) decreased gradually, and the absorption peak (428 nm) increased gradually, so that cyanide (CN-) could be identified by the naked eye. Moreover, an obvious fluorescence change was evident before and after the reaction under irradiation using 365 nm UV light. The maximum emission peak (667 nm) decreased gradually, whilst the emission peak (495 nm) increased gradually, which allowed for the proportional fluorescence detection of cyanide (CN-). Using fluorescence spectrometry, the fluorescent probe W could linearly detect CN- over the concentration range of 1-9 µM (R2 = 9913, RSD = 0.534) with a detection limit of 0.24 µM. Using UV-Vis spectrophotometry, the linear detection range for CN- was found to be 1-27 µM (R2 = 0.99583, RSD = 0.675) with a detection limit of 0.13 µM. The sensing mechanism was confirmed by 1H NMR spectroscopic titrations, 13C NMR spectroscopy, X-ray crystallographic analysis and HRMS. The recognition and detection of CN- by probe W was characterized by a rapid response, high selectivity, and high sensitivity. Therefore, this probe provides a convenient, effective and economical method for synthesizing and detecting cyanide efficiently and sensitively.

Pyrene-Based Cationic Fluorophores with High Affinity for BF4-, PF6-, and ClO4- Anions: Detection and Removal.

Anions play an indispensable role in the balance and regulation of the ecological environment and human health; however, excess anions can cause serious ecological and environment problems. Therefore, the detection and removal of excess anions in aqueous solution is not only a technological problem but also crucial for environmental protection. Herein, a set of water-soluble pyrene-based cationic fluorophores were synthesized, which exhibit high sensitivity for the detection of the anions BF4-, PF6-, and ClO4- via electrostatic interactions. Such fluorescent probes exhibit "turn-on" emission characteristics even at low concentrations of anions due to anion-π+ interactions. Moreover, these fluorescence probes act as efficient precipitating agents for the removal of the BF4-, PF6-, and ClO4- anions from an aqueous environment. This work opens up new avenues for future research on pyrene-based fluorophores as turn-on fluorescence probes for anion detection and as excellent precipitating agents in environmental settings.

New pyrrolo[3,2-b]pyrroles with AIE characteristics for detection of dichloromethane and chloroform.

Three new pyrrolo[3,2-b]pyrrole derivatives containing methoxyphenyl, pyrene or tetraphenylethylene (TPE) units (compounds 1-3) have been designed, synthesized and fully characterized. The aggregation-induced emission (AIE) properties of compounds 1-3 were tested in different water fraction (fw ) of tetrahydrofuran (THF). The pyrrolo[3,2-b]pyrrole derivative 3 containing TPE units exhibited typical AIE features with an enhanced emission (∼32-fold) in the solid state versus in solution; compounds 1 and 2 exhibited an aggregation-caused quenching effect. In addition, the steric and electronic effects of the peripheral moieties on the emission behavior, both in solution and in the solid state, have been investigated. Moreover, pyrrolo[3,2-b]pyrrole 1 exhibits high sensitivity and selectivity for dichloromethane and chloroform solvents, with the system displaying a new emission peak and fast response time under ultraviolet irradiation.

One-Pot Synthesis of Pyreno[2,1-b]furan Molecules with Two-Photon Absorption Properties.

The development of large π-conjugated polycyclic heteroaromatic materials is of immense interest, both in the academic as well as the industrial community. Herein, we present the efficient one-pot synthesis of novel pyreno[2,1-b]furan molecules from a newly designed intermediate, which display intense green emission (505-516 nm) in solution and a large red shift emission (625-640 nm) in the solid state, because of strong π-π stacking. More interestingly, the compounds exhibit novel two-photon absorption (TPA) properties, and the TPA cross-section (δ) value was increased to 533 GM by regulating the electronic effects of the substituents of the pyreno[2,1-b]furan molecules. This study not only offers a facile strategy for constructing new pyrene-fused luminescence materials with two-photon absorption properties but also provides a new chemical intermediate that opens up a new pathway to advanced materials.

Intermolecular Hydrogen-Bond-Assisted Solid-State Dual-Emission Molecules with Mechanical Force-Induced Enhanced Emission.

Hydrogen bonds not only play a crucial role in the life sciences but also endow molecules with fantastic physical and chemical properties, which help in the realization of their high-tech applications. This work presents an efficient strategy for achieving highly efficient solid-state dual-emission blue emitters with mechanical force-induced enhanced emission properties via intermolecular hydrogen bonds via novel pyrene-based intermediates, namely, 1,3,6,8-tetrabromo-2,7-dihydroxypyrene (1) and 1,3,6,8-tetrabromo-2-hydroxypyrene (2), prepared via hydroxylation and bromination of pyrene in high yields. Moreover, further use of a classical Pd-catalyzed coupling reaction affords new pyrene-based luminescent materials 3-5, which display high thermal stability (in range of 336-447 °C), blue emission (<463 nm), and high quantum yields in solution. Interestingly, with the monosubstituted hydroxyl (OH) or methoxy (OMe) group located at position 2 of pyrene, compounds 4a and 5 display exciting dual emission with mechanical force-induced enhanced emission properties, due to the presence of several hydrogen-bond interactions. Moreover, this series of compounds exhibits numerous advantages, for example, deeper blue emission with a narrower full width at half-maximum, a stronger steric effect, and higher hydrophilicity. Thus, these novel bromopyrene intermediates and related pyrene-based luminescent materials will pave the way for further exploration of novel organic solid-state luminescent materials for potential application in organic electronics, bioimaging, chemosensors, etc.

A New Cationic Fluorescent Probe for HSO3- Based on Bisulfite Induced Aggregation Self-Assembly.

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO3-, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.

Stimuli-Responsive Materials from Ferrocene-Based Organic Small Molecule for Wearable Sensors.

Stimuli-responsive crystals capable of energy conversion have emerged as promising materials for smart sensors, actuators, wearable devices, and robotics. Here, a novel ferrocene-based organic molecule crystal (Fc-Cz) that possesses anisotropic piezoelectric, optical, and mechanical properties is reported. It is demonstrated that the new crystal Fc-Cz can be used as an ultrasensitive piezoelectric material in fabricating strain sensors. The flexible sensor made of crystal Fc-Cz can detect small strains/deformations and motions with a fast response speed. Analysis based on density functional theory (DFT) indicates that an external pressure can affect the dipole moment by changing the molecular configuration of the asymmetric single crystal Fc-Cz in the crystalline state, leading to a change of polarity, and thereby an enhanced dielectric constant. This work demonstrates a new artificial organic small molecule for high-performance tactile sensors, indicating its great potential for developing low-cost flexible wearable sensors.

An Air-Stable Organic Radical from a Controllable Photoinduced Domino Reaction of a Hexa-aryl Substituted Anthracene.

Air-stable organic radicals and radical ions have attracted great attention for their far-reaching application ranging from bioimaging to organic electronics. However, because of the highly reactive nature of organic radicals, the design and synthesis of air-stable organic radicals still remains a challenge. Herein, an air-stable organic radical from a controllable photoinduced domino reaction of a hexa-aryl substituted anthracene is described. The domino reaction involves a photoinduced [4 + 2] cycloaddition reaction, rearrangement, photolysis, and an elimination reaction; 1H/13C NMR spectroscopy, high resolution mass spectrometry, single-crystal X-ray diffraction, and EPR spectroscopy were exploited for characterization. Furthermore, a photoinduced domino reaction mechanism is proposed according to the experimental and theoretical studies. In addition, the effects of employing push and pull electronic groups on the controllable photoinduced domino reaction were investigated. This article not only offers a new blue emitter and novel air-stable organic radical compound for potential application in organic semiconductor applications, but also provides a perspective for understanding the fundamentals of the reaction mechanism on going from anthracene to semiquinone in such anthracene systems.

Lithiated Calix[n]arenes (n = 6 or 8): Synthesis, Structures, and Use in the Ring-Opening Polymerization of Cyclic Esters.

A variety of lithiated calix[n]arenes, for which n = 6 or 8, have been isolated, structurally characterized, and evaluated as catalysts for the ring-opening polymerization (ROP) of the cyclic esters ε-caprolactone (ε-CL), δ-valerolactone (δ-VL), and rac-lactide (r-LA). In particular, interaction of p-tert-butylcalix[6]areneH6 (L6H6) with LiOtBu in THF led to the isolation of [Li14(L6H)2(CO3)2(THF)6(OH2)6]·14THF (1·14THF), the core of which has a chain of five Li2O2 diamonds. Similar use of p-tert-butylcalix[8]areneH8 (L8H8) afforded [Li10(L8)(OH)2(THF)8]·7THF (2·7THF), where the core is composed of a six-rung Li-O ladder. Use of debutylated calix[8]areneH8 (deBuL8H8) led to an elongated dimer [Li18(deBuL8)2(OtBu)2(THF)14]·4THF (3·4THF) in which the calix[8]arenes possess a wavelike conformation forming bridges to link three separate LixOy clusters (where x and y = 6, ignoring the THF donor oxygens). Interaction of L8H8 with LiOH·H2O afforded [Li4(L8H4)(OH2)4(THF)6]·5.5THF (4·5.5THF), where intramolecular H-bond interactions involving Li, O, and H construct a cage in the core of the structure with six- and eight-membered rings. Lastly, addition of Me3Al to the solution generated from L8H8 and LiOtBu led to the isolation of [(AlMe2)2Li20(L8H2)2(OH2)4(O2-)4(OH)2(NCMe)12]·10MeCN (5·10MeCN) in which Li, O, Al, and N centers build a polyhedral core. These complexes have been screened for their potential to act as precatalysts in the ring-opening polymerization (ROP) of ε-CL, δ-VL, and r-LA. For the ROP of ε-CL, δ-VL, and r-LA, systems 1-4 exhibited moderate activity at 130 °C over 8 h. In the case of ROP using the mixed-metal (Li/Al) system 5, better conversions and high molecular weight polymers were achieved. In the case of the ROP of ω-pentadecalactone (ω-PDL), the systems proved to be inactive under the conditions employed herein.

Dynamic Coordination between a Triphenylamine-Functionalized Salicylaldehyde Schiff Base and a Copper(II) Ion.

The coordination between a ligand and a metal is a spontaneous and uncontrollable process. In this Article, we successfully observe the formation of metal coordination in a triphenylamine-functionalized salicylaldehyde Schiff base with a copper(II) ion. The ligand TPA-Py first reacts with Cu2+ in a stepwise process to afford the dynamic complex TPA-Py@Cu2+ ([ligand]:[Cu2+] = 1:1), which further reacts with an extra copper(II) ion to afford 2TPA-Py@4Cu2+ with the following stepwise (or cumulative) stability constants: K1 = 4.0694 × 103 and K2 = 1.0761 × 106, respectively. The entire metal coordination process can be visualized, and the coordination mode of the probe toward copper was further evaluated by ultraviolet-visible/fluorescence spectra, single-crystal X-ray diffraction, density functional theory calculations, high-resolution mass spectra, and nuclear magnetic resonance spectroscopic titrations. Compound TPA-Py exhibited excellent sensitivity and specificity toward copper(II) ions in THF/water media with a low limit of detection of 2.687 × 10-7 mol L-1. In addition, TPI-An-Py can be applied to the detection of Cu2+ in real samples with satisfactory recoveries in the range of 100-112% in lake water and 98-101% in tap water. This Article not only reports an excellent fluorescence probe for copper(II) ion detection but also presents an instance for more fully understanding the metal coordination process.

A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc.

A novel turn-on fluorescence probe L has been designed that exhibits high selectivity and sensitivity with a detection limit of 9.53 × 10-8 mol/L for the quantification of Zn2+. 1H-NMR spectroscopy and single crystal X-ray diffraction analysis revealed the unsymmetrical nature of the structure of the Schiff base probe L. An emission titration experiment in the presence of different molar fractions of Zn2+ was used to perform a Job's plot analysis. The results showed that the stoichiometric ratio of the complex formed by L and Zn2+ was 1:1. Moreover, the molecular structure of the mononuclear Cu complex reveals one ligand L coordinates with one Cu atom in the asymmetric unit. On adding CuCl2 to the ZnCl2/L system, a Cu-Zn complex was formed and a strong quenching behavior was observed, which inferred that the Cu2+ displaced Zn2+ to coordinate with the imine nitrogen atoms and hydroxyl oxygen atoms of probe L.

A 1-Hydroxy-2,4-Diformylnaphthalene-Based Fluorescent Probe and Its Detection of Sulfites/Bisulfite.

A novel 1-hydroxy-2,4-diformylnaphthalene-based fluorescent probe L was synthesized by a Knoevenagel reaction and exhibited excellent sensitivity and selectivity towards sulfite ions (SO32-) and bisulfite ions (HSO3-). The detection limits of the probe L were 0.24 µM using UV-Vis spectroscopy and 9.93 nM using fluorescence spectroscopy, respectively. Furthermore, the fluorescent probe L could be utilized for detection in real water samples with satisfactory recoveries in the range 99.20%~104.30% in lake water and 100.00%~104.80% in tap water by UV-Vis absorption spectrometry, and in the range 100.50%~108.60% in lake water and 102.70%~103.80% in tap water by fluorescence spectrophotometry.