Near thermal noise limit, 5W single frequency fiber laser base on the ring cavity configuration.

In this study, we present an ultralow noise single-frequency fiber laser operating at 1550 nm, utilizing a traveling-wave ring cavity configuration. The frequency noise of the laser approaches the thermal noise limit, achieving a white noise level of 0.025 Hz2/Hz, resulting in an instantaneous linewidth of 0.08 Hz. After amplification, the output power reaches 4.94 W while maintaining the same low white noise level as the laser oscillator. The integration linewidths of the laser oscillator and amplifier are 221 Hz and 665 Hz, respectively, with both exhibiting relative intensity noises that approach the quantum shot noise limit. To the best of our knowledge, this work shows the lowest frequency noise combined with relatively high power for this type of ring cavity fiber laser.

Widely-tunable all-fiber Tm doped MOPA with > 1†kW of output power.

In this paper, we report on a high-power and widely tunable thulium-doped fiber laser (TDFL) based on a monolithic master oscillator power amplifier (MOPA) system. The master oscillator is a Tm fiber ring laser incorporating a tunable bandpass filter to realize narrow linewidth and wavelength tunable operation. The MOPA generated 1010 W ∼1039 W of output power over a tuning range of 107 nm from 1943 to 2050nm with slope efficiencies of more than 51% and spectra linewidth of ∼0.5 nm. Power stability (RMS) in ∼10 min scale is measured to be ∼0.52%. A diffraction-limited beam quality factor M2 of ∼1.18 is measured at 920 W of laser output. Output power is pump-limited without the onset of parasitic oscillation or amplified spontaneous emission (ASE) even at the maximum power level. This is the first demonstration, to the best of our knowledge, on an all-fiber integrated wavelength-tunable TDFL at 2 µm with output power exceeding 1 kW.

High power Ho:Y2O3 ceramic laser with controllable output intensity profile at 2.1 µm.

We report on a high-power Ho:Y2O3 ceramic laser at 2.1 µm with controllable output beam profile ranging from LG01 donut, flat-top to TEM00 mode using a simple two-mirror resonator. In-band pumped at 1943nm using a Tm fiber laser beam shaped via a coupling optics comprising a capillary fiber and lens-combination to achieve distributed pump absorption in Ho:Y2O3 and hence selective excitation of the target mode, the laser yields 29.7 W of LG01 donut, 28.0 W of crater-like, 27.7 W of flat-top and 33.5 W of TEM00 mode output for absorbed pump power of 53.5 W, 56.2 W, 57.3 W and 58.2 W, respectively, corresponding to a slope efficiency of 58.5%, 54.3%, 53.8% and 61.2%. This is, to the best of our knowledge, the first demonstration of laser generation with continuously tunable output intensity profile at ∼2 µm wavelength region.

High power and efficient operation of a Ho:Y2O3 ceramic laser with over 210 W of output power at 2.1 µm.

We report on power scaling and efficient operation of a Ho:Y2O3 ceramic laser at 2.1 µm in-band pumped with an incoherently beam combined high power and narrow-linewidth Tm fiber source at 1931.2 nm. The 0.5 at.% Ho3+ doped Ho:Y2O3 ceramic is fabricated in-house with scattering loss of < 0.25% cm-1. Up to 210.5 W of continuous-wave output power has been generated at 2117 nm for 366 W absorbed pump power shaped with a one-dimensional top-hat profile, corresponding to a slope efficiency of 60.0% with respect to the absorbed pump power. A slope efficiency of 67.5% has been demonstrated with 160 W of output power using a circular beam pump configuration. Results presented in this work verify the superior power scaling capability of a Ho:Y2O3 ceramic laser with high efficiency at ∼2.1 µm.