Clinical outcomes of 3-5 years follow-up of immediate implant placement in posterior teeth: a prospective study.

BACKGROUND: Immediate implant placement in posterior teeth has become popular in recent years. However, only a few studies focused on evaluating the long-term success of immediate implant placement. PURPOSE: To analyze the clinical outcomes of immediate implant placement in the posterior region with conventional loading with 3-5 years follow-up following the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference. METHOD: The study was done in 25 bone-level implants (Straumann® SLActive® bone level tapered implant, Straumann®, Basel, Switzerland) in 19 patients who underwent immediate implant placement in a posterior tooth with conventional loading with 3-5 years follow-up. The overall success and survival of these placements were evaluated following the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference using chart records, clinical examination, radiographic evaluation, and outcomes measurement. Patient satisfaction was evaluated by using a numeric rating scale. The biological and technical status, modified Pink Esthetic Score (mPES), complications, and marginal bone change were also evaluated. The analysis was done using SPSS version 21 (SPSS Inc., Chicago, IL, USA). The data were analyzed using a paired samples t-test. RESULTS: It was found that 24 out of the 25 (96%) dental implants survived for an average of 57 ± 8.07 months. All of the 24 surviving dental implants were considered an operational success. The average mPES was 9.75 ± 0.44. The major prosthetic complications seen were: (1) proximal contact loss (41.67%), (2) loosening of the screw (8.33%), and (3) cement debonding (4.17%). CONCLUSIONS: Immediate implant placement in a posterior tooth with conventional loading yields a predictable result with some complications. The most prominent complications were proximal contact loss, followed by loosening of the screw and cement debonding. The implant survival rate was 96% at a mean time follow-up of 4 years and 9 months.

Dental Luting Cements: An Updated Comprehensive Review.

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer's instructions for the thin cement-layer thickness are important for the long-term success of the restoration.

Graphene for Antimicrobial and Coating Application.

Graphene is a versatile compound with several outstanding properties, providing a combination of impressive surface area, high strength, thermal and electrical properties, with a wide array of functionalization possibilities. This review aims to present an introduction of graphene and presents a comprehensive up-to-date review of graphene as an antimicrobial and coating application in medicine and dentistry. Available articles on graphene for biomedical applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect. The selected articles were included in this study. Extensive research on graphene in several fields exists. However, the available literature on graphene-based coatings in dentistry and medical implant technology is limited. Graphene exhibits high biocompatibility, corrosion prevention, antimicrobial properties to prevent the colonization of bacteria. Graphene coatings enhance adhesion of cells, osteogenic differentiation, and promote antibacterial activity to parts of titanium unaffected by the thermal treatment. Furthermore, the graphene layer can improve the surface properties of implants which can be used for biomedical applications. Hence, graphene and its derivatives may hold the key for the next revolution in dental and medical technology.

Biomolecular and Biochemical Aspects of the Oral Cavity.

Recent advances in science, especially innovations in the field of biochemistry and materials science, greatly contribute to improvements in the prevention, diagnosis, and treatment of oral diseases [...].

Insights and Advancements in Biomaterials for Prosthodontics and Implant Dentistry.

It is always difficult to avoid subjectivism in the assessment of the properties of prosthodontics materials due to the ambiguity in the evaluation criteria of dental research [...].

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study.

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients' GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.

Comparison of Fracture Load of the Four Translucent Zirconia Crowns.

Recently, translucent zirconia has become the most prevalent material used as a restorative material. This study aimed to compare the crown fracture load of the four most common different translucent zirconia brands available in the market at 1.5 mm thickness. Standardized tooth preparations for a full ceramic crown were designed digitally with software (AutoCAD) by placing a 1.0 mm chamfer margin and 1.5 mm occluso-cervical curvature for the crown sample manufacturing. Stylized crowns were chosen to control the thickness of the crown. The axial and occlusal thickness were standardized to 1.5 mm thickness except at the central pit, which was 1.3 mm thick. The STL file for the tooth dies was prepared using software (3Shape TRIOS® Patient Monitoring, Copenhagen, Denmark). The tooth dies were printed with a resin material (NextDent Model 2.0, Vertex-Dental B.V., Soesterberg, The Netherlands) using a 3D printing software (3D Sprint® Client Version 3.0.0.2494) from a 3D printer (NextDent™ 5100, Vertex-Dental B.V., Soesterberg, The Netherlands). The printing layer thickness was 50 µm. Then, a total of twenty-eight (N = 28) stylized crowns were milled out of AmannGirrbach (Amann Girrbach GmbH, Pforzheim, Germany) (n = 7), Cercon HT (Dentsply Sirona, Bensheim, Germany) (n = 7), Cercon XT (Dentsply Sirona, Bensheim, Germany) (n = 7), and Vita YZ XT (Zahnfabrik, Bäd Sackingen, Germany) (n = 7). Following sintering the crowns, sandblasting was performed and they were bonded to the tooth dies with the resin cement (RelyX U-200, 3M ESPE, Seefeld, Germany) and permitted to self-cure under finger pressure for 6 min. The crowns were loaded on the occlusal surface in a universal testing machine (MTS Centurion) with a stainless-steel ball indenter (7 mm radius) with a loading rate of 1 mm/min to contact the stylized crowns on each of the four cusps until failure. A rubber sheet (1.5 mm thickness) was positioned between the crown and indenter, which helped with the load distribution. Statistical analysis was done using SPSS version 20 (IBM Company, Chicago, USA). The fracture loads were analyzed using Dunnett's T3 test, and the number of cracks was analyzed using the Mann-Whitney U test among the groups. The significant level was set at p value = 0.05. The mean fracture loads were 3086.54 ± 441.74 N, 4804.94 ± 70.12 N, 3317.76 ± 199.80 N, and 2921.87 ± 349.67 N for AmannGirrbac, Cercon HT, Cercon XT, and Vita YZ XT, respectively. The mean fracture loads for the surfaces with the greatest number of cracks (excluding the occlusal surfaces) were on the lingual surface for AmannGirrbach and Cercon HT, on the distal and mesial for Cercon XT, and on the buccal for Vita YZ XT. We found that the AmannGirrbach had the most overall cracks. Cercon XT had the greatest number of occlusal cracks and appeared to be the most shattered. Cercon HT had the least number of cracks. In conclusion, Cercon HT presented the best strength properties, the highest fracture load, and no visible cracks. AmannGirrbach presented the lowest strength properties.

Characteristics of Periodontal Tissues in Prosthetic Treatment with Fixed Dental Prostheses.

The objective of the present study was to investigate the effects of various types of fixed prostheses on periodontal tissues and explore the association of gingival biotype and gum recession in relation to prosthesis types. The study participants (N = 95) were divided into three groups based on the type of dental prosthesis: Group-I: cobalt-chrome (Co-Cr) ceramic prosthesis fabricated by the conventional method (n = 35); Group-II: consisted of patients with Co-Cr ceramic prostheses fabricated by a computer-aided design and computer aided manufacturing (CAD/CAM) technique (n = 30); and Group-III: zirconia-based prostheses fabricated by the CAD/CAM technique (n = 30). Following the use of prostheses, periodontal examinations were performed using the Community Periodontal Index (CPI) and Modified Approximal Plaque Index (MAPI). In addition, the gingival biotype was examined using a probe transparency method. The Statistical Package for the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA), was used to analyze the results, and the significance level was set at p = 0.05. It showed the MAPI results after the use of prosthetic rehabilitation for 12 months of periodontitis in 87.9% ± 15.4 of patients in Group-I, in 80.6% ± 17.97 in those in Group-II, and in 62.5% ± 21.4 in those in Group-III (p < 0.01). The CPI index results indicated a high prevalence of periodontal disease in all groups. The number of people with healthy periodontium constituted 17.1% of patients in Group-I, 24.2% in Group-II, and 37.1% in Group-III. Our study concluded that prosthetic treatment with periodontal diseases showed better outcomes while using dental prostheses fabricated by the CAD/CAM technique compared to the conventionally fabricated dental prostheses. The thin gingival biotype is more often associated with gingival recession than the thick biotype.

Cytomorphometric Analysis of Inflammation Dynamics in the Periodontium Following the Use of Fixed Dental Prostheses.

Cytomorphometry is used in the sampling of biological materials and diagnostic procedures. The use of cytological studies in periodontal diseases is not well described in the literature. Our study aimed to quantitatively assess the inflammation dynamics using cytomorphometric analysis of the periodontium before and after the use of fixed dental prostheses. Following ethics approval, a total of 105 subjects were divided in 3 groups as gingivitis (n = 23), periodontitis (n = 58), and healthy periodontium (control) (n = 24). The fixed dental prostheses (crowns and fixed partial dentures) were fabricated from cobalt-chrome metal-ceramic prostheses using the conventional method (C/M-CoCr), cobalt-chrome metal-ceramic prostheses by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (C/C-CoCr), and zirconia-based ceramic prostheses by the CAD/CAM technique (C/C-Zr) among subjects with gingivitis and periodontitis. The gingival crevicular fluid (GCF) was obtained from subjects before and after the use of the prostheses. The total count of epithelial cells and the connective tissue cells or polymorphonuclear neutrophils (PMNs) in GCF were studied using cytomorphometric analysis. The Statistical Package Tor the Social Sciences (SPSS), Version 20 (IBM Company, Chicago, IL, USA) was used to analyze the results and the significance level was set at p = 0.05. The data for before and after the use of the prostheses were compared using independent t-Tests. Similarly, the results after the use of prostheses in gingivitis, periodontitis, and control in each type of prostheses were compared using One-way ANOVA with post hoc using Scheffe. The total epithelial cells and the PMNs were determined along with the epithelium/leukocyte index. Regardless of the prostheses type used, no significant change in the parameters was identified among patients with a healthy periodontium, before and after prosthetic treatment. In all study groups, a statistically increase (p value < 0.05) was observed in the oral epithelial cell counts and a statistically decrease (p < 0.05) in the PMNs count following the use of the fixed prostheses. Data on cytomorphometric analysis could enable the selection of the most appropriate prostheses for use in patients with periodontal pathologies. When choosing prostheses, changes in the composition of GCF could be considered as a useful criterion for their use.

Graphene Oxide/Silver Nanoparticle Coating Produced by Electrophoretic Deposition Improved the Mechanical and Tribological Properties of NiTi Alloy for Biomedical Applications.

The aim of this study was to evaluate the mechanical and tribological properties of graphene oxide/silver nanoparticle (GO/AgNP) coated medical grade nickel-titanium (NiTi) alloy. The alloy substrates were coated using electrophoretic deposition at 30 V for 1, 5, and 10 min and were characterized by SEM, Raman spectroscopy, EDS, and surface profilometer. Mechanical and tribological tests were performed for hardness, Young's modulus, and friction coefficient. The data were analyzed using the Kruskal-Wallis test at a significance level of 0.05 to compare the coatings' roughness, thickness, friction coefficient, and hardness at the different coating times. The GO/AgNP coatings were confirmed with Raman spectroscopy, which demonstrated the presence of D bands and G bands at ∼1300 cm-1 and ∼1600 cm-1. The intensity ratios of the D and G bands (ID/IG) were 0.838, 0.836, and 0.837 in the 1, 5, and 10 min coated groups, respectively. The coating thickness ranged from 0.46-1.34 µm and the mean surface roughness (Ra) ranged from 50.72-69.93 nm. Increasing the coating time from 1-10 min increased the roughness, thickness, and Young's modulus of surface coating. The friction coefficients of the coated NiTi alloy were significantly lower compared with that of the uncoated NiTi allloy (p < 0.001). The GO/AgNP nanocomposite coated NiTi alloy demonstrated improved mechanical strength and a reduced friction coefficient that would be more favorable for biomedical applications.

Bioactive Glass Applications in Dentistry.

At present, researchers in the field of biomaterials are focusing on the oral hard and soft tissue engineering with bioactive ingredients by activating body immune cells or different proteins of the body. By doing this natural ground substance, tissue component and long-lasting tissues grow. One of the current biomaterials is known as bioactive glass (BAG). The bioactive properties make BAG applicable to several clinical applications involving the regeneration of hard tissues in medicine and dentistry. In dentistry, its uses include dental restorative materials, mineralizing agents, as a coating material for dental implants, pulp capping, root canal treatment, and air-abrasion, and in medicine it has its applications from orthopedics to soft-tissue restoration. This review aims to provide an overview of promising and current uses of bioactive glasses in dentistry.

Rapid fabrication of a digital prosthesis.

Finger prosthesis often needs refabrication due to its discoloration following use. This article presents a novel, economical, and cost-effective technique to duplicate the patient׳s existing prosthesis to obtain a new wax replica, which is then clinically tried and processed to obtain new silicone finger prosthesis. This technique requires comparatively less clinical and laboratory steps as to fabricate an entirely new prosthesis. The newly fabricated silicone finger prosthesis has the fit and marginal adaptation of the patient׳s existing prosthesis but the esthetics is improved.

Callistemon viminalis leaf extract phytochemicals modified silver-ruthenium bimetallic zinc oxide nanocomposite biosynthesis: application on nanocoating photocatalytic Escherichia coli disinfection.

Antibiotics are of great interest due to antibiotic-resistant problems around the globe due to bacterial resistance to conventional antibiotics. In this study, a novel green biosynthesis of silver-ruthenium bimetallic zinc oxide nanocomposite using Callistemon viminalis leaf extract as a reducing agent using zinc nitrate hexahydrate, silver nitrate, and ruthenium(iii) chloride as capping agents was reported. The results demonstrated that the surface morphology of the prepared bimetallic nanocomposite by scanning electron microscopy was hexagonal in shape for zinc nanoparticle, rectangular in shape for silver nanoparticle, and tetragonal in shape for ruthenium nanoparticle, having an average surface size 25, 35, and 55 nm, respectively. Fourier transform infrared analysis confirmed the presence of compounds containing alkene, halo-, sulfoxide, phenol, nitro-, phenyl-ester, carboxylic acid, amines, and alcohols which act as functional groups attached to the surface of nanocomposites. Results from X-ray diffraction analysis found 81.12% crystallinity and hexagonal structure of zinc nanoparticles, rectangular structure of silver nanoparticles, and tetragonal structure of ruthenium nanoparticles, which are also similar to the results from transmission electron microscopy analysis. The average size distribution by dynamic light scattering of silver-ruthenium bimetallic zinc oxide nanocomposite was 255 nm, which confirms the biosynthesis of non-uniform size. Photo-disinfection activity of a silver-ruthenium bimetallic zinc oxide nanocomposite against Escherichia coli bacteria isolated from hospital wastewater under dark and ultraviolet-A irradiation conditions was observed. The antibacterial activity was calculated at 2.42704239, ensuring the silver-ruthenium bimetallic zinc oxide nanomaterials have photo-disinfection properties. The results from this study revealed that the developed novel antibacterial nanocomposite of silver-ruthenium bimetallic zinc oxide is useful in nanocoating photocatalytic Escherichia coli disinfection and can be applied to disinfect surfaces.

Oral bacteriophages: metagenomic clues to interpret microbiomes.

Bacteriophages are bacterial viruses that are distributed throughout the environment. Lytic phages and prophages in saliva, oral mucosa, and dental plaque interact with the oral microbiota and can change biofilm formation. The interactions between phages and bacteria can be considered a portion of oral metagenomics. The metagenomic profile of the oral microbiome indicates various bacteria. Indeed, there are various phages against these bacteria in the oral cavity. However, some other phages, like phages against Absconditabacteria, Chlamydiae, or Chloroflexi, have not been identified in the oral cavity. This review gives an overview of oral bacteriophage and used for metagenomics. Metagenomics of these phages deals with multi-drug-resistant bacterial plaques (biofilms) in oral cavities and oral infection. Hence, dentists and pharmacologists should know this metagenomic profile to cope with predental and dental infectious diseases.

Efficacy of Biofilm Removal on the Dental Implant Surface by Sodium Bicarbonate and Erythritol Powder Airflow System.

OBJECTIVE: Peri-implantitis is a common complication in implant therapy and it is one of the main contributing factors to implant failure. This can be prevented by regular maintenance with mechanical debridement. One of the recent mechanical debridement methods is air abrasion therapy using different abrasive powders. This study aimed to evaluate the two common abrasive powders of different sizes (sodium bicarbonate and erythritol) for their biofilm cleaning efficacy on dental implant surfaces. MATERIALS AND METHODS: In an in vitro setting, a total of 33 implants were divided into three groups: Group 1 (n =11) = no treatment; group 2 (n = 11) = air abrasion therapy treated group using a sodium bicarbonate powder (AIRFLOW Powder Classic Comfort, EMS Electro Medical Systems, Nyon, Switzerland); and group 3 (n = 11) = air abrasion therapy treated group using an erythritol powder (AIRFLOW Powder Plus, EMS Electro Medical Systems, Nyon, Switzerland). The implants in each group were subjected to biofilm formation, and group 2 and group 3 were treated with air abrasion therapy of two different powders having different sizes with the same settings. The particle sizes were sodium bicarbonate (40 µm) and erythritol (14µm). The surface characteristics of the dental implants in three groups were studied from a digital camera and under the scanning electron microscope at different magnifications. The comparison of biofilm-removal efficacy between the three groups was performed by using a one-way analysis of variance with post-hoc Dunnett's T3 test. A p-value less than 0.05 was chosen to indicate statistical significance. RESULTS: There were no statistical differences (p > 0.05) between the two powder-treated groups for the biofilm cleaning efficacy. However, both groups showed significantly better biofilm-cleaning efficacy than the control group (p < 0.05). CONCLUSION: This suggests that both powders are effective in removing biofilm from the implant surface under ideal conditions. However, there was no clear distinction between the cleaning potential of the two powders, as both performed in a similar manner.

Importance of oral health in mental health disorders: An updated review.

Background: Mental disorders are indeed an expanding threat, which requires raised awareness, education, prevention, and treatment initiatives nationally and globally. This review presents an updated review on the relationships between oral health and mental health disorders and the importance of oral health in mental health disorders. Method: A literature search was done regarding mental disorders and oral health approaches in Google Scholar and PubMed from the year 1995 until 2023. All the English-language papers were evaluated based on the inclusion criteria. Publications included original research papers, review articles and book chapters. Results: Common mental disorders include depression, anxiety, bipolar disorder, Schizophrenia, dementia, and alcohol and drug use disorders. The interplay of oral health and mental disorders involves dysregulated microbiome, translocated bacteria, and systemic inflammation, among others. Conclusion: There is a complex relationship between mental disorders and oral diseases. Various oral health problems are associated with mental health problems. The interplay of oral health and mental disorders involves dysregulated microbiome, translocated bacteria, and systemic inflammation, among others. Mental health nurses including physicians and dental professionals should be involved in the oral health care of mental health disorder patients. Therefore, multidisciplinary should be involved in the care of mental health disorders, and they should consider oral health care as an essential part of their care for patients with mental health disorders. Future investigations should strive to elucidate the exact biological relationships, to develop new directions for treatment.

Role of hormones in bone remodeling in the craniofacial complex: A review.

Background: Diseases such as periodontitis and osteoporosis are expected to rise tremendously by 2050. Bone formation and remodeling are complex processes that are disturbed in a variety of diseases influenced by various hormones. Objective: This study aimed to review and present the roles of various hormones that regulate bone remodeling of the craniofacial complex. Methods: A literature search was conducted on PubMed and Google Scholar for studies related to hormones and jawbone. Search strategies included the combinations ("name of hormone" + "dental term") of the following terms: "hormones", "oxytocin", "estrogen", "adiponectin", "parathyroid hormone", "testosterone", "insulin", "angiotensin", "cortisol", and "erythropoietin", combined with a dental term "jaw bone", "alveolar bone", "dental implant", "jaw + bone regeneration, healing or repair", "dentistry", "periodontitis", "dry socket", "osteoporosis" or "alveolitis". The papers were screened according to the inclusion criteria from January 1, 2000 to March 31, 2021 in English. Publications included reviews, book chapters, and original research papers; in vitro studies, in vivo animal, or human studies, including clinical studies, and meta-analyses. Results: Bone formation and remodeling is a complex continuous process involving many hormones. Bone volume reduction following tooth extractions and bone diseases, such as periodontitis and osteoporosis, cause serious problems and require a great understanding of the process. Conclusion: Hormones are with us all the time, shape our development and regulate homeostasis. Newly discovered effects of hormones influencing bone healing open the possibilities of using hormones as therapeutics to combat bone-related diseases.

Current classification of zirconia in dentistry: an updated review.

Zirconia, a crystalline oxide of zirconium, holds good mechanical, optical, and biological properties. The metal-free restorations, mostly consisting of all-ceramic/zirconia restorations, are becoming popular restorative materials in restorative and prosthetic dentistry choices for aesthetic and biological reasons. Dental zirconia has increased over the past years producing wide varieties of zirconia for prosthetic restorations in dentistry. At present, literature is lacking on the recent zirconia biomaterials in dentistry. Currently, no article has the latest information on the various zirconia biomaterials in dentistry. Hence, the aim of this article is to present an overview of recent dental zirconia biomaterials and tends to classify the recent zirconia biomaterials in dentistry. This article is useful for dentists, dental technicians, prosthodontists, academicians, and researchers in the field of dental zirconia.

Onco-immunity and therapeutic application of amygdalin: A review.

Background: Amygdalin is known as a chemical compound derived from various fruits. The glycosides existing in this plant have been historically utilized as an anticancer agent. This review presented an overview of amygdalin and its onco-immunity and other therapeutic medical applications. Method: A literature search for studies relating to amygdalin and cancer treatment was carried out using PubMed and Google Scholar. Combinations of the following terms were used in the search strategies: "amygdalin," "rhodanese," "cyanide," "cyanogenic," "hypothiocyanite," "mandelonitrile," "glucosides," "cancer," "apoptosis," and "cytotoxicity," combined with a cancer term such as "seed," "almond," or "apricot," "cancer + cell line, antiproliferation or inhibition," "BAX From the March 3, 1981 until the April 15, 2021, all of the English-language papers were evaluated based on the inclusion criteria. Publications included reviews, chapters from books, and original research papers. Results: The FDA prohibits Amygdalin from medical usage as an anticancer treatment due to a lack of proof of cure in cancer cases. When this natural-based compound is used with conditional chemotherapeutic medicines causes synergistic effects. Besides, amygdalin is used to manage asthma, improve the immune system, induce apoptosis in human renal fibroblasts, and inhibit hyperglycemia. Conclusion: Various medical uses of amygdalin have been found such as managing asthma, improving the immune system, inducing apoptosis in human renal fibroblasts, and inhibiting hyperglycemia. More effective in vitro and review studies are required to elucidate the exact role of this herb in medical applications.

Full Digital Workflow in the Esthetic Dental Restoration.

This case report presented a fully digital workflow in esthetic dental restoration. A 51-year-old female patient was referred to BDMS Wellness Clinic due to a fracture of the maxillary left central incisor. An immediate dental implant was planned to restore tooth 21 with esthetic crown lengthening of upper front teeth and new zirconia crowns for teeth 11, 12, 13, 21, 22, and 23. Digital impression was made using a digital scanner (PRIMESCAN®, Dentsply Sirona, Bensheim, Germany); surgical guide (Cerec Guide 3, Dentsply Sirona, Bensheim, Germany) was designed by using a designing software (Galileos Software, Dentsply Sirona, Bensheim, Germany) and was milled by using a milling machine (MCXL milling machine, Dentsply Sirona, Bensheim, Germany) to create a precise surgical guide. 3D smile design was done by using the Digital Smile Design (DSD) program, the crown lengthening guide was designed according to DSD designed by using a designing software (Inlab 19 Software, Dentsply Sirona, Bensheim, Germany), and the guide was fabricated by a 3D printer (FormLabs Form 2, Formlab, MA, USA). Provisional crowns (splinted) for teeth 11, 12, 13, 21, 22, and 23 were milled by using polymer (VIPI BLOCK TRILUX®, VIPI Industria, Pirassununga, SP, Brazil) using a milling machine (MCX5, Dentsply Sirona, Bensheim, Germany). The zirconia crowns were designed by using software (Inlab19 Software, Dentsply Sirona, Bensheim, Germany) and milled using the same milling machine. At the implant position, Ti-base is cemented by using an abutment (Multilink Hybrid Abutment, Ivoclar Vivadent, Schaan, Lichtenstein, Germany) with zirconia coping (Cercon base white shade, Dentsply Sirona, Bensheim, Germany) utilized as the abutment. The zirconia crowns (Cercon Xt, Dentsply Sirona, Bensheim, Germany) were sintered and characterized and then cemented. The patient was satisfied with the esthetic outcome of the treatment.