Probing Degradation in Lithium Ion Batteries with On-Chip Electrochemistry Mass Spectrometry.

The rapid uptake of lithium ion batteries (LIBs) for large scale electric vehicle and energy storage applications requires a deeper understanding of the degradation mechanisms. Capacity fade is due to the complex interplay between phase transitions, electrolyte decomposition and transition metal dissolution; many of these poorly understood parasitic reactions evolve gases as a side product. Here we present an on-chip electrochemistry mass spectrometry method that enables ultra-sensitive, fully quantified and time resolved detection of volatile species evolving from an operating LIB. The technique's electrochemical performance and mass transport is described by a finite element model and then experimentally used to demonstrate the variety of new insights into LIB performance. We show the versatility of the technique, including (a) observation of oxygen evolving from a LiNiMnCoO2 cathode and (b) the solid electrolyte interphase formation reaction on graphite in a variety of electrolytes, enabling the deconvolution of lithium inventory loss (c) the first direct evidence, by virtue of the improved time resolution of our technique, that carbon dioxide reduction to ethylene takes place in a lithium ion battery. The emerging insight will guide and validate battery lifetime models, as well as inform the design of longer lasting batteries.

Label-Free Time-of-Flight Secondary Ion Mass Spectrometry Imaging of Sulfur-Producing Enzymes inside Microglia Cells following Exposure to Silver Nanowires.

There are no methods sensitive enough to detect enzymes within cells, without the use of analyte labeling. Here we show that it is possible to detect protein ion signals of three different H2S-synthesizing enzymes inside microglia after pretreatment with silver nanowires (AgNW) using time-of-flight secondary ion mass spectrometry (TOF-SIMS). Protein fragment ions, including the fragment of amino acid (C4H8N+ = 70 amu), fragments of the sulfur-producing cystathionine-containing enzymes, and the Ag+ ion signal could be detected without the use of any labels; the cells were mapped using the C4H8N+ amino acid fragment. Scanning electron microscopy imaging and energy-dispersive X-ray chemical analysis showed that the AgNWs were inside the same cells imaged by TOF-SIMS and transformed chemically into crystalline Ag2S within cells in which the sulfur-producing proteins were detected. The presence of these sulfur-producing cystathionine-containing enzymes within the cells was confirmed by Western blots and confocal microscopy images of fluorescently labeled antibodies against the sulfur-producing enzymes. Label-free TOF-SIMS is very promising for the label-free identification of H2S-contributing enzymes and their cellular localization in biological systems. The technique could in the future be used to identify which of these enzymes are most contributory.

Tuneable fluorescence enhancement of nanostructured ZnO arrays with controlled morphology.

Zinc oxide (ZnO) nanorods (NRs) have been demonstrated as a promising platform for enhanced fluorescence-based sensing. It is, however, desirable to achieve a tuneable fluorescence enhancement with these platforms so that the fluorescence output can be adjusted based on the real need. Here we show that the fluorescence enhancement can be tuned by changing the diameter of the ZnO nanorods, simply controlled by potassium chloride (KCl) concentration during synthesis, using arrays of previously developed aligned NRs (a.k.a. aligned NR forests) and nanoflowers (NFs). Combining the experimental results obtained from ZnO nanostructures with controlled morphology and computer-aided verification, we show that the fluorescence enhancement factor increases when ZnO NRs become thicker. The fluorescence enhancement factor of NF arrays is shown to have a much stronger dependency on the rod diameter than that of aligned NR arrays. We prove that the morphology of nanostructures, which can be controlled, can be an important factor for fluorescence enhancement. Our (i) effort towards understanding the structure-property relationships of ZnO nanostructured arrays and (ii) demonstration on tuneable fluorescence enhancement by nanostructure engineering can provide some guidance towards the rational design of future fluorescence amplification platforms potentially for bio-sensing.

Enhancement of the upconversion photoluminescence of hexagonal phase NaYF4:Yb3+,Er3+ nanoparticles by mesoporous gold films.

Efficient enhancement of photoluminescence in rare-earth activated upconversion materials is of great significance for their practical applications in various fields. In this work, three-dimensional mesoporous gold films were fabricated by a low-cost and facile dealloying approach to improve the upconversion photoluminescence efficiency. The mesoporous Au films exhibit good chemical stability, large-area uniformity and abundant distribution of porous nanospaces. Varying the time of the dealloying process leads to modification of the pore size distribution, surface roughness and residual Ag content, resulting in effective tuning of the wavelength of the broadband localized surface plasmon resonance (LSPR). Enhancement factors were identified to be a function of the dealloying time. With the optimized upconversion photoluminescence enhancement, a 41-fold increase was achieved with the mesoporous gold substrate which had been dealloyed for 8 days. These results pave the way to overcome the limitation of poor upconversion efficiency for widespread practical applications in life science and energy fields.

Pulmonary effects of inhalation of spark-generated silver nanoparticles in Brown-Norway and Sprague-Dawley rats.

BACKGROUND: The increasing use of silver nanoparticles (AgNPs) in consumer products is concerning. We examined the potential toxic effects when inhaled in Brown-Norway (BN) rats with a pre-inflammatory state compared to Sprague-Dawley (SD) rats. METHODS: We determined the effect of AgNPs generated from a spark generator (mass concentration: 600-800 µg/mm(3); mean diameter: 13-16 nm; total lung doses: 8 [Low] and 26-28 [High] µg) inhaled by the nasal route in both rat strains. Rats were sacrificed at day 1 and day 7 after exposure and measurement of lung function. RESULTS: In both strains, there was an increase in neutrophils in bronchoalveolar lavage (BAL) fluid at 24 h at the high dose, with concomitant eosinophilia in BN rats. While BAL inflammatory cells were mostly normalised by Day 7, lung inflammation scores remained increased although not the tissue eosinophil scores. Total protein levels were elevated at both lung doses in both strains. There was an increase in BAL IL-1ß, KC, IL-17, CCL2 and CCL3 levels in both strains at Day 1, mostly at high dose. Phospholipid levels were increased at the high dose in SD rats at Day 1 and 7, while in BN rats, this was only seen at Day 1; surfactant protein D levels decreased at day 7 at the high dose in SD rats, but was increased at Day 1 at the low dose in BN rats. There was a transient increase in central airway resistance and in tissue elastance in BN rats at Day 1 but not in SD rats. Positive silver-staining was seen particularly in lung tissue macrophages in a dose and time-dependent response in both strains, maximal by day 7. Lung silver levels were relatively higher in BN rat and present at day 7 in both strains. CONCLUSIONS: Presence of cellular inflammation and increasing silver-positive macrophages in lungs at day 7, associated with significant levels of lung silver indicate that lung toxicity is persistent even with the absence of airway luminal inflammation at that time-point. The higher levels and persistence of lung silver in BN rats may be due to the pre-existing inflammatory state of the lungs.

Mechanisms of Polymer-Templated Nanoparticle Synthesis: Contrasting ZnS and Au.

We combine solution small-angle X-ray scattering (SAXS) and high-resolution analytical transmission electron microscopy (ATEM) to gain a full mechanistic understanding of substructure formation in nanoparticles templated by block copolymer reverse micelles, specifically poly(styrene)-block-poly(2-vinylpyridine). We report a novel substructure for micelle-templated ZnS nanoparticles, in which small crystallites (∼4 nm) exist within a larger (∼20 nm) amorphous organic-inorganic hybrid matrix. The formation of this complex structure is explained via SAXS measurements that characterize in situ for the first time the intermediate state of the metal-loaded micelle core: Zn(2+) ions are distributed throughout the micelle core, which solidifies as a unit on sulfidation. The nanoparticle size is thus determined by the radius of the metal-loaded core, rather than the quantity of available metal ions. This mechanism leads to particle size counterintuitively decreasing with increasing metal content, based on the modified interactions of the metal-complexed monomers in direct contrast to gold nanoparticles templated by the same polymer.

Static and Dynamic Microscopy of the Chemical Stability and Aggregation State of Silver Nanowires in Components of Murine Pulmonary Surfactant.

The increase of production volumes of silver nanowires (AgNWs) and of consumer products incorporating them may lead to increased health risks from occupational and public exposures. There is currently limited information about the putative toxicity of AgNWs upon inhalation and incomplete understanding of the properties that control their bioreactivity. The lung lining fluid (LLF), which contains phospholipids and surfactant proteins, represents a first contact site with the respiratory system. In this work, the impact of dipalmitoylphosphatidylcholine (DPPC), Curosurf, and murine LLF on the stability of AgNWs was examined. Both the phospholipid and protein components of the LLF modified the dissolution kinetics of AgNWs, due to the formation of a lipid corona or aggregation of the AgNWs. Moreover, the hydrophilic proteins, but neither the hydrophobic surfactant proteins nor the phospholipids, induced agglomeration of the AgNWs. Finally, the generation of a secondary population of nanosilver was observed and attributed to the reduction of Ag(+) ions by the surface capping of the AgNWs. Our findings highlight that combinations of spatially resolved dynamic and static techniques are required to develop a holistic understanding of which parameters govern AgNW behavior at the point of exposure and to accurately predict their risks on human health and the environment.

Understanding the selective etching of electrodeposited ZnO nanorods.

ZnO nanotubes were prepared by selective dissolution of electrodeposited nanorods. The effect of solution pH, rod morphology, and chloride ion concentration on the dissolution mechanism was studied. The selective etching was rationalized in terms of the surface energy of the different ZnO crystal faces and reactant diffusion. The nanorod diameter and chloride concentration are the most influential parameters on the dissolution mechanism because they control homogeneous dissolution or selective etching of the (110) and (002) surfaces. Bulk solution pH only has an effect on the rate of dissolution. By accurate control of the dissolution process, the nanomorphology can be tailored, and the formation of rods with a thin diameter (10-20 nm), cavity, or ultra-thin-walled tubes (2-5 nm) can be achieved.

Inhalation of silver nanomaterials--seeing the risks.

Demand for silver engineered nanomaterials (ENMs) is increasing rapidly in optoelectronic and in health and medical applications due to their antibacterial, thermal, electrical conductive, and other properties. The continued commercial up-scaling of ENM production and application needs to be accompanied by an understanding of the occupational health, public safety and environmental implications of these materials. There have been numerous in vitro studies and some in vivo studies of ENM toxicity but their results are frequently inconclusive. Some of the variability between studies has arisen due to a lack of consistency between experimental models, since small differences between test materials can markedly alter their behaviour. In addition, the propensity for the physicochemistry of silver ENMs to alter, sometimes quite radically, depending on the environment they encounter, can profoundly alter their bioreactivity. Consequently, it is important to accurately characterise the materials before use, at the point of exposure and at the nanomaterial-tissue, or "nanobio", interface, to be able to appreciate their environmental impact. This paper reviews current literature on the pulmonary effects of silver nanomaterials. We focus our review on describing whether, and by which mechanisms, the chemistry and structure of these materials can be linked to their bioreactivity in the respiratory system. In particular, the mechanisms by which the physicochemical properties (e.g., aggregation state, morphology and chemistry) of silver nanomaterials change in various biological milieu (i.e., relevant proteins, lipids and other molecules, and biofluids, such as lung surfactant) and affect subsequent interactions with and within cells will be discussed, in the context not only of what is measured but also of what can be visualized.

Correction to "Searching for the Rules of Electrochemical Nitrogen Fixation".

[This corrects the article DOI: 10.1021/acscatal.3c03951.].

Extensive photochemical restructuring of molecule-metal surfaces under room light.

The molecule-metal interface is of paramount importance for many devices and processes, and directly involved in photocatalysis, molecular electronics, nanophotonics, and molecular (bio-)sensing. Here the photostability of this interface is shown to be sensitive even to room light levels for specific molecules and metals. Optical spectroscopy is used to track photoinduced migration of gold atoms when functionalised with different thiolated molecules that form uniform monolayers on Au. Nucleation and growth of characteristic surface metal nanostructures is observed from the light-driven adatoms. By watching the spectral shifts of optical modes from nanoparticles used to precoat these surfaces, we identify processes involved in the photo-migration mechanism and the chemical groups that facilitate it. This photosensitivity of the molecule-metal interface highlights the significance of optically induced surface reconstruction. In some catalytic contexts this can enhance activity, especially utilising atomically dispersed gold. Conversely, in electronic device applications such reconstructions introduce problematic aging effects.

High-resolution analytical electron microscopy reveals cell culture media-induced changes to the chemistry of silver nanowires.

There is a growing concern about the potential adverse effects on human health upon exposure to engineered silver nanomaterials (particles, wires, and plates). However, the majority of studies testing the toxicity of silver nanomaterials have examined nominally "as-synthesized" materials without considering the fate of the materials in biologically relevant fluids. Here, in-house silver nanowires (AgNWs) were prepared by a modified polyol process and were incubated in three cell culture media (DMEM, RPMI-1640, and DCCM-1) to examine the impact of AgNW-medium interactions on the physicochemical properties of the AgNWs. High-resolution analytical transmission electron microscopy revealed that Ag2S crystals form on the surface of AgNWs within 1 h of incubation in DCCM-1. In contrast, the incubation of AgNWs in RPMI-1640 or DMEM did not lead to sulfidation. When the DCCM-1 cell culture medium was separated into its small molecule solutes and salts and protein components, the AgNWs were found to sulfidize in the fraction containing small molecule solutes and salts but not in the fraction containing the protein component of the media. Further investigation showed the AgNWs did not readily sulfidize in the presence of isolated sulfur containing amino acids or proteins, such as cysteine or bovine serum albumin (BSA). The results demonstrate that the AgNWs can be transformed by the media before and during the incubation with cells, and therefore, the effects of cell culture media must be considered in the analysis of toxicity assays. Appropriate media and material controls must be in place to allow accurate predictions about the toxicity and, ultimately, the health risk of this commercially relevant class of nanomaterial.

The stability of silver nanoparticles in a model of pulmonary surfactant.

The growing use of silver nanoparticles (AgNPs) in consumer products has raised concerns about their potential impact on the environment and human health. Whether AgNPs dissolve and release Ag(+) ions, or coarsen to form large aggregates, is critical in determining their potential toxicity. In this work, the stability of AgNPs in dipalmitoylphosphatidylcholine (DPPC), the major component of pulmonary surfactant, was investigated as a function of pH. Spherical, citrate-capped AgNPs with average diameters of 14 ± 1.6 nm (n = 200) were prepared by a chemical bath reduction. The kinetics of Ag(+) ion release was strongly pH-dependent. After 14 days of incubation in sodium perchlorate (NaClO4) or perchloric acid (HClO4) solutions, the total fraction of AgNPs dissolved varied from ∼10% at pH 3, to ∼2% at pH 5, with negligible dissolution at pH 7. A decrease in pH from 7 to 3 also promoted particle aggregation and coarsening. DPPC (100 mg·L(-1)) delayed the release of Ag(+) ions, but did not significantly alter the total amount of Ag(+) released after two weeks. In addition, DPPC improved the dispersion of the AgNPs and inhibited aggregation and coarsening. TEM images revealed that the AgNPs were coated with a DPPC layer serving as a semipermeable layer. Hence, lung lining fluid, particularly DPPC, can modify the aggregation state and kinetics of Ag(+) ion release of inhaled AgNPs in the lung. These observations have important implications for predicting the potential reactivity of AgNPs in the lung and the environment.

Nonaqueous Li-Mediated Nitrogen Reduction: Taking Control of Potentials.

The performance of the Li-mediated ammonia synthesis has progressed dramatically since its recent reintroduction. However, fundamental understanding of this reaction is slower paced, due to the many uncontrolled variables influencing it. To address this, we developed a true nonaqueous LiFePO4 reference electrode, providing both a redox anchor from which to measure potentials against and estimates of sources of energy efficiency loss. We demonstrate its stable electrochemical potential in operation using different N2- and H2-saturated electrolytes. Using this reference, we uncover the relation between partial current density and potentials. While the counter electrode potential increases linearly with current, the working electrode remains stable at lithium plating, suggesting it to be the only electrochemical step involved in this process. We also use the LiFePO4/Li+ equilibrium as a tool to probe Li-ion activity changes in situ. We hope to drive the field toward more defined systems to allow a holistic understanding of this reaction.

Searching for the Rules of Electrochemical Nitrogen Fixation.

Li-mediated ammonia synthesis is, thus far, the only electrochemical method for heterogeneous decentralized ammonia production. The unique selectivity of the solid electrode provides an alternative to one of the largest heterogeneous thermal catalytic processes. However, it is burdened with intrinsic energy losses, operating at a Li plating potential. In this work, we survey the periodic table to understand the fundamental features that make Li stand out. Through density functional theory calculations and experimentation on chemistries analogous to lithium (e.g., Na, Mg, Ca), we find that lithium is unique in several ways. It combines a stable nitride that readily decomposes to ammonia with an ideal solid electrolyte interphase, balancing reagents at the reactive interface. We propose descriptors based on simulated formation and binding energies of key intermediates and further on hard and soft acids and bases (HSAB principle) to generalize such features. The survey will help the community toward electrochemical systems beyond Li for nitrogen fixation.

The crystalline structure of copper phthalocyanine films on ZnO(1100).

The structure of copper phthalocyanine (CuPc) thin films (5-100 nm) deposited on single-crystal ZnO(1100) substrates by organic molecular beam deposition was determined from grazing-incidence X-ray diffraction reciprocal space maps. The crystal structure was identified as the metastable polymorph α-CuPc, but the molecular stacking was found to vary depending on the film thickness: for thin films, a herringbone arrangement was observed, whereas for films thicker than 10 nm, coexistence of both the herringbone and brickstone arrangements was found. We propose a modified structure for the herringbone phase with a larger monoclinic ß angle, which leads to intrastack Cu-Cu distances closer to those in the brickstone phase. This structural basis enables an understanding of the functional properties (e.g., light absorption and charge transport) of (opto)electronic devices fabricated from CuPc/ZnO hybrid systems.

Polypeptide folding-mediated tuning of the optical and structural properties of gold nanoparticle assemblies.

Responsive hybrid nanomaterials with well-defined properties are of significant interest for the development of biosensors with additional applications in tissue engineering and drug delivery. Here, we present a detailed characterization using UV-vis spectroscopy and small angle X-ray scattering of a hybrid material comprised of polypeptide-decorated gold nanoparticles with highly controllable assembly properties. The assembly is triggered by a folding-dependent bridging of the particles mediated by the heteroassociation of immobilized helix-loop-helix polypeptides and a complementary nonlinear polypeptide present in solution. The polypeptides are de novo designed to associate and fold into a heterotrimeric complex comprised of two disulfide-linked four-helix bundles. The particles form structured assemblies with a highly defined interparticle gap (4.8±0.4 nm) that correlates to the size of the folded polypeptides. Transitions in particle aggregation dynamics, mass-fractal dimensions and ordering, as a function of particle size and the concentration of the bridging polypeptide, are observed; these have significant effects on the optical properties of the assemblies. The assembly and ordering of the particles are highly complex processes that are affected by a large number of variables including the number of polypeptides bridging the particles and the particle mobility within the aggregates. A fundamental understanding of these processes is of paramount interest for the development of novel hybrid nanomaterials with tunable structural and optical properties and for the optimization of nanoparticle-based colorimetric biodetection strategies.

Acid resistant functionalised magnetic nanoparticles for radionuclide and heavy metal adsorption.

Coating superparamagnetic iron oxide NPs with SiO2 has been established in order to confer stability in acidic media. Acid stability tests were carried out between pH 1 and pH 7 to determine the effectiveness of the SiO2 passivating layer to protect the magnetic Fe3O4 core. Transmission Electron Microscopy (TEM) and zeta potential measurements have shown that uncoated Fe3O4 NPs exhibit rapid agglomeration and dissolution when exposed to acidic media, moving from a zeta potential of - 26 mV to a zeta potential of + 3 mV. In contrast, the SiO2 coating of the Fe3O4 NPs shows a very high degree of stability for over 14 months and the zeta potential of these NPs remained at ∼- 39 mV throughout the acid exposure and they showed no loss in magnetisaton. Due to the use of these NPs as a potential tool for heavy metal extraction, the stability of the surface functionalisation (in this case a phosphate complex) was also assessed. With a constant zeta potential of ∼ - 29 mV for POx-SiO2@Fe3O4 NP complex, the phosphate functionality was shown to be highly stable in the acidic conditions simulating the environment of certain nuclear wastes. ATR-FTIR was conducted after acid exposure confirming that the phosphate complex on the surface of the NPs remained present. Finally, preliminary sorption experiments were carried out with Pb(II), where the NP complexes shown complete removal of the heavy metals at pH 3 and pH 5.

ZnO Nanomaterials and Ionic Zn Partition within Wastewater Sludge Investigated by Isotopic Labeling.

The increasing commercial use of engineered zinc oxide nanomaterials necessitates a thorough understanding of their behavior following their release into wastewater. Herein, the fates of zinc oxide nanoparticles (ZnO NPs) and ionic Zn in a real primary sludge collected from a municipal wastewater system are studied via stable isotope tracing at an environmentally relevant spiking concentration of 15.2 µg g-1. Due to rapid dissolution, nanoparticulate ZnO does not impart particle-specific effects, and the Zn ions from NP dissolution and ionic Zn display indistinguishable behavior as they partition equally between the solid, liquid, and ultrafiltrate phases of the sludge over a 4-h incubation period. This work provides important constraints on the behavior of engineered ZnO nanomaterials in primary sludge-the first barrier in a wastewater treatment plant-at low, realistic concentrations. As the calculated solid-liquid partition coefficients are significantly lower than those reported in prior studies that employ unreasonably high spiking concentrations, this work highlights the importance of using low, environmentally relevant doses of engineered nanomaterials in experiments to obtain accurate risk assessments.

Metal coordination in C2N-like materials towards dual atom catalysts for oxygen reduction.

Single-atom catalysts, in particular the Fe-N-C family of materials, have emerged as a promising alternative to platinum group metals in fuel cells as catalysts for the oxygen reduction reaction. Numerous theoretical studies have suggested that dual atom catalysts can appreciably accelerate catalytic reactions; nevertheless, the synthesis of these materials is highly challenging owing to metal atom clustering and aggregation into nanoparticles during high temperature synthesis treatment. In this work, dual metal atom catalysts are prepared by controlled post synthetic metal-coordination in a C2N-like material. The configuration of the active sites was confirmed by means of X-ray adsorption spectroscopy and scanning transmission electron microscopy. During oxygen reduction, the catalyst exhibited an activity of 2.4 ± 0.3 A gcarbon -1 at 0.8 V versus a reversible hydrogen electrode in acidic media, comparable to the most active in the literature. This work provides a novel approach for the targeted synthesis of catalysts containing dual metal sites in electrocatalysis.