CAD/CAM versus traditional complete dentures: A systematic review and meta-analysis of patient- and clinician-reported outcomes and costs.

STATEMENT OF PROBLEM: Computer-aided design and manufacturing (CAD/CAM) have been increasingly used to enhance the patient and clinician experiences with removable complete dentures (CDs). Yet, evidence from systematic reviews is lacking to validate the clinical significance of these digital prostheses. PURPOSE: The purpose of this systematic review was to compare CAD/CAM CDs with the traditional ones in terms of patient and clinician-reported outcomes, post-insertion adjustment visits and costs. MATERIALS AND METHODS: An electronic search of four databases [Medline (Ovid), Embase, Scopus and Cochrane CENTRAL; last update: May 2022] was performed to retrieve clinical studies comparing CAD/CAM and traditional CDs. Two independent reviewers screened the articles, extracted data (methods and outcomes) and assessed risk of bias of the included studies. The following outcomes underwent meta-analysis (random-effects model): overall patient and clinician satisfaction, oral health-related quality of life (OHRQoL), number of post-insertion adjustment visits, as well as laboratory and total costs. RESULTS: This review included 11 studies. Meta-analysis revealed that CAD/CAM CDs are comparable to the traditional CDs in terms of overall patient satisfaction and OHRQoL. Clinician-reported data depended on the manufacturing technique: whereas milled CDs performed better than traditional CDs in terms of clinician satisfaction and number of adjustments, 3D printed and traditional CDs were similar. Fabrication of CAD/CAM CDs required significantly less laboratory and overall costs than the traditional CDs. CONCLUSIONS: There is some evidence showing that CAD/CAM CDs are at least comparable to traditional CDs. Further well-designed randomized clinical trials are needed to evaluate the performance of specific CAD/CAM approaches for manufacturing CDs, however.

Simultaneous Implant Placement and Sinus Lift Using Leukocyte-Platelet Rich Fibrin: A Retrospective 40-Month Study.

ABSTRACT: The aim of this study was to report the 40-month clinical radiographical outcomes of maxillary sinus floor augmentation using leukocyte-platelet rich fibrin (L-PRF) as a single graft in combination with immediately placed implants. Twenty partially edentulous individuals with missing teeth in the region associated to maxillary sinus were included in this retrospective study. A lateral sinus floor elevation was performed considering a complete wear of the bone wall of the maxillary sinus and immediately placing the implant and filled the maxillary sinus with L-PRF clots as a single graft. After 5 months, all the implants received single screwed implant-supported prostheses. Subsequent evaluation was every 4 months assessing the success rate and biological complications. Two maxillary sinus membrane were perforated and covered with L-PRF clots. The mean bone height gain was 62.6%, observing a 100% of success and that in all the cases achieved at least the implant height. In conclusion, the use of platelet-rich fibrin clot as a single graft biomaterial during the maxillary sinus lift procedure combined with immediate implant placement may be a reliable clinical alternative, even to repair the sinus membrane.

The effects of three disinfection protocols on Candida spp., denture stomatitis, and biofilm: A parallel group randomized controlled trial.

STATEMENT OF PROBLEM: Antifungals are used to treat Candida infections. However, because of increased antifungal resistance and the length of antifungal therapy, Candida spp. infections can be prevented using the prosthesis hygiene method. Therefore, establishing efficient, safe, and low-cost hygiene protocols for complete denture wearers is necessary. PURPOSE: The purpose of this clinical trial was to compare 10% Ricinus communis (RC10%) and 0.5% chloramine-T (CT0.5%) with negative (water) and positive (0.25% sodium hypochlorite [SH0.25%]) controls to establish a protocol to treat denture stomatitis (DS), remove denture biofilm, reduce overall microbiota, and decrease Candida spp. on the palate and denture bases. MATERIAL AND METHODS: This randomized, double blind, controlled clinical trial allocated 60 DS-positive participants in parallel groups: RC10%, CT0.5%, negative control, and SH0.25%. All participants brushed their palate and dentures and applied 1 of the solutions only to the denture. The following outcomes were assessed at baseline and after 7 and 37 days: Candida spp. counts, frequency of species by presumptive identification, DS severity, and photographic quantification of biofilm. The Kruskal-Wallis and Friedman tests with stepwise step-down post hoc test compared the anticandidal effect and the DS score (between groups and time). ANOVA and the Tukey post hoc test were used for biofilm removal comparison (α=.05). RESULTS: Microbial counts were solution- and time-dependent for dentures, with C. albicans, C. tropicalis, and C. glabrata being the most prevalent species. RC10% presented similar results to baseline and control after 7 and 37 days. CT0.5% reduced the CFU/mL compared with the baseline. SH0.25% was the most effective. DS reduced in all groups, independent of the solution. SH0.25% reduced biofilm the most, followed by RC10%. CT0.5% was similar to the control. CONCLUSIONS: SH0.25% demonstrated potential for Candida spp. control in denture wearers with DS. The other protocols showed intermediate activity and might be more suitable for longer immersion periods.

Efficacy of a propolis solution for cleaning complete dentures.

PURPOSE: The efficacy of a propolis solution against denture biofilm was evaluated by means of an in vitro assessment and a cross-over randomized clinical trial. METHODS: Acrylic resin specimens were contaminated by Staphylococcus aureus, Streptococcus mutans, Escherichia coli, Candida albicans, Candida glabrata, Candida parapsilosis, immersed in a (A) propolis solution, (B) saline or (C) alkaline peroxide, applied onto Petri plates with culture medium and after incubation the number of colonies was counted. For the clinical trial, 30 complete denture wearers were randomly assigned to groups (A) propolis solution, and (B) saline, following one of the sequences (I)A/B or (II) B/A. After each intervention, biofilm was quantified by means of digital photos taken from the intaglio surface and a microbiological quantification of Candida spp. and mutans streptococci was conducted. RESULTS: Both propolis solution and alkaline peroxide reduced the microbial counts for S. mutans and C. albicans with significant and greater effect for group C (P< 0.05). However, no difference was found clinically between the interventions. The propolis solution showed an intermediate antimicrobial effect against S. mutans and C. albicans. Also, it did not exert an immediate effect on denture biofilm. CLINICAL SIGNIFICANCE: A commercially available propolis-based cleanser solution was evaluated in vitro and clinically for the treatment of denture stomatitis. Although an immediate effect on denture biofilm was not observed after a single application, It showed antimicrobial effect against S. mutans and C. albicans.

Preclinical study of a cost-effective photodynamic therapy protocol for treating oral candidoses.

Photodynamic therapy (PDT) is a promising treatment for oral candidoses. Its use as an alternative to antifungals prevents several adverse effects, including microbial resistance. However, most PDT protocols do not employ devices and consumables commonly available in dental practice, thus influencing treatment affordability. This study aimed to determine the efficacy of a PDT method based on light curing units' blue LEDs combined to a plaque-disclosing composition (5% erythrosine) against C. albicans in culture and in a murine model of oral candidosis. Standard and resistant fungal strains were tested in vitro in planktonic and biofilm forms. PDT (pre-irradiation time periods: 30 and 60 s; irradiation time: 3 min) was compared to control conditions without light and/or erythrosine. Mice with induced oral candidosis (n = 40) randomly received PDT or similar control conditions with subsequent C. albicans count. These mice underwent histological analysis, as well as 12 healthy mice submitted to experimental treatments. PDT completely inactivated C. albicans planktonic cells and biofilm. Control conditions presented minor differences (ANOVA, p < 0.05), with mean values ranging from 5.2 to 6.8 log10 (UFC/mL). Infected mice presented no significant difference in C. albicans counts consequent to treatments (ANOVA, p = 0.721), although the PDT protocol was able to enhance the inflammatory infiltrate in healthy mice. It can be concluded that the tested PDT protocol can inactivate C. albicans but still needs further investigation in order to achieve efficacy and safety.

In Vitro Analysis of Surface Roughness of Acrylic Resin Exposed to the Combined Hygiene Method of Brushing and Immersion in Ricinus communis and Sodium Hypochlorite.

PURPOSE: To evaluate a solution based on Ricinus communis (Castor oil) for denture cleansing, comparing it to sodium hypochlorite (NaOCl) for the surface roughness of heat-polymerized acrylic resin. MATERIALS AND METHODS: Forty polished and unpolished resin specimens (90 × 30 × 4 mm) were evaluated before and after their exposure to protocol hygiene: brushing the specimens with a specific denture brush and mild soap for 3 minutes, three times a day, and immersing them in hygiene solutions (0.25% NaOCl-S1 and 0.5% NaOCl-S2; 10% R. communis-S3; saline-S4: control) for 20 minutes. Surface roughness was evaluated by rugosimeter and scanning electron microscopy (SEM) before and after the protocol. For evaluation of surface roughness, polished and unpolished surfaces were used. RESULTS: The roughness of the polished surface was not affected by time (p = 0.062), but was affected by solutions (p < 0.0001) and the interaction between factors (p = 0.005). For S1 and S4, the period did not influence the roughness. For S2, there was a change after 7 days, remaining stable after 14 days. For S3, there were changes, and stabilization occurred after 14 days. After 7 and 14 days, S2 and S3 promoted major changes, but after 21 days, there were no differences among solutions, except saline. The unpolished surface was not influenced by factors: period (p = 0.115), solution (p = 0.120), and their interaction (p = 0.382). SEM analysis showed similar results on the evaluation of surface roughness. CONCLUSIONS: The polished surface of the prosthesis was more susceptible to changes when exposed to hygiene solutions, and although the 0.5% NaOCl solution promoted an increase in the surface roughness compared with the same solution at 0.25% and R. communis at 10%, the values are clinically acceptable.

Interventions for treating traumatised ankylosed permanent front teeth.

BACKGROUND: Teeth that have suffered trauma can fuse to the surrounding bone in a process called dental ankylosis. Ankylosed permanent front teeth fail to erupt during facial growth and can become displaced, thus resulting in functional and aesthetic problems. Dental ankylosis is also associated with root resorption, which may eventually lead to the loss of affected teeth. Different interventions for the management of ankylosed permanent front teeth have been described, but it is unclear which are the most effective. OBJECTIVES: To evaluate the effectiveness of any intervention that can be used in the treatment of ankylosed permanent front teeth. SEARCH METHODS: The following electronic databases were searched: the Cochrane Oral Health Group Trials Register (to 3 August 2015), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, 2015, Issue 7), MEDLINE via OVID (1946 to 3 August 2015), EMBASE via OVID (1980 to 3 August 2015) and LILACS via BIREME (1982 to 3 August 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the WHO Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials (RCTs) comparing any intervention for treating displaced ankylosed permanent front teeth in individuals of any age. Treatments could be compared with one another, with placebo or with no treatment. DATA COLLECTION AND ANALYSIS: Two independent review authors screened studies independently. Full papers were obtained for potentially relevant trials. Although no study was included, the authors had planned to extract data independently and to analyse the data according to the Cochrane Handbook for Systematic Reviews of Interventions. MAIN RESULTS: No randomised controlled trials that met the inclusion criteria were identified. AUTHORS' CONCLUSIONS: We were unable to identify any reports of randomised controlled trials regarding the efficacy of different treatment options for ankylosed permanent front teeth. The lack of high level evidence for the management of this health problem emphasises the need for well designed clinical trials on this topic, which conform to the CONSORT statement (www.consort-statement.org/).

Traumatic ulcerative granuloma with stromal eosinophilia around mini dental implants without the protection of a denture base.

This is a report of a case of an unusual oral lesion after the placement of mini implants for the retention of a mandibular overdenture. A patient received four 2-mm-wide dental implants in the anterior mandible and had her mandibular denture relined with a soft material. After 3 months, she was not wearing her mandibular denture, and two nodular ulcerated lesions were observed near the mini implants. The lesions ceased following excision and regular denture wearing. Clinical and microscopic examination led to the diagnosis of traumatic ulcerative granuloma with stromal eosinophilia (TUGSE). TUGSE is rare lesion with a benign course that may occur following injury of the oral mucosa by mini implants under certain circumstances.

A randomized trial on simplified and conventional methods for complete denture fabrication: cost analysis.

PURPOSE: This study aimed to quantify the costs of complete denture fabrication by a simplified method compared with a conventional protocol. MATERIALS AND METHODS: A sample of edentulous patients needing conventional maxillary and mandibular complete dentures was randomly divided into group S, which received dentures fabricated by a simplified method, and group C, which received conventionally fabricated dentures. We calculated direct and indirect costs for each participant including unscheduled procedures. This study assessed 19 and 20 participants allocated into groups S and C, respectively, and comparisons between groups were conducted by the Mann-Whitney and Student's t-test (α = 0.05). RESULTS: Complete denture fabrication demanded median time periods of 173.2 and 284.5 minutes from the operator for groups S and C respectively, and 46.6 and 61.7 minutes from the dental assistant (significant differences, p < 0.05). There was no difference between groups regarding postinsertion adjustments. Group S showed lower values for costs with materials and time spent by patients than group C during the fabrication stage, but not during adjustments. CONCLUSIONS: The median direct cost of complete denture treatment was 34.9% lower for the simplified method. It can be concluded that the simplified method is less costly for patients and the health system when compared with a conventional protocol for the rehabilitation of edentulous patients.

Clinical trial of an experimental cleaning solution: antibiofilm effect and integrity of a silicone-based denture liner.

AIM: This study evaluated the antibiofilm effect of an experimental solution of 2% Ricinus communis (R. communis) on a silicone-based denture liner by means of a randomized clinical trial, as well as the integrity of such liner following a cleansing regimen with such solution. MATERIALS AND METHODS: About 30 complete denture wearers had their lower dentures relined with a silicone-based denture liner and randomly allocated to cleanse their dentures by means of: (A) a specific toothbrush for complete dentures and dentifrice; (B) soaking in an experimental 2% R. communis solution; and (C) association of A and B. Considered outcomes were biofilm coverage area (%), microbial counts by means of the deoxy-ribonucleic acid (DNA) checkerboard hybridization technique and physical integrity of the soft liner, assessed during a time interval of 60 days. Mean group values were compared by analysis of variance (ANOVA) and Tukey tests or generalized linear method (α = 0.05). RESULTS: The mechanical method presented the lowest biofilm percentage (1.45 ± 1.03) if compared to the chemical method (2.96 ± 1.98) and the associated one (2.71 ± 1.76). After 60 days (3.37 ± 2.04), biofilm accumulation was higher than at 15 days (1.28 ± 0.77) and 30 days (2.46 ± 1.54). The denture liner was less deteriorated and kept its physical integrity when the mechanical method was applied. The chemical method presented higher effectiveness against microorganisms, including some Candida species. CONCLUSION: The 2% R. communis solution presented stronger antimicrobial capacity than brushing on a silicone-based denture liner after immersion. However, it was not superior to the mechanical method in preserving the physical integrity of the material and in biofilm removal. CLINICAL SIGNIFICANCE: Soft denture liners hygiene is a very important issue and not conclusive in the literature. The experimental solution of 2% R. communis evaluated presented promising antimicrobial potential and should be more explored to be recommended as cleanser.

Using an Attachment System with PEEK Matrices for Single-Implant Overdentures: In Vitro Retention Force.

Single-implant overdentures (SIOs) represent a major biomechanical challenge in terms of prosthetic retention. The Novaloc attachment system has the potential to overcome those challenges when used for SIOs, due to the use of PEEK matrices. This study compared the retentive force of the Novaloc attachment to the traditional Locator system, before and after cyclic insertion-removal cycles. Three Novaloc matrices (white, yellow, and green, corresponding to low, medium, and high retention, respectively) and Locator (medium retention) were tested, totalling four groups. Retentive force was measured using an Imada force gauge before and after 1095 insertion-removal cycles, corresponding to a year of SIO wearing. Retention was tested with the implants angulated at 0, 10, and 20°. Data for the different groups, angles, and cycling periods were tested via linear regression analysis and two-way ANOVA (α = 0.05). Although the Locator system yielded higher retention forces in general, it lost a much higher percentage of retention with cycling. This trend was similar with the three angles, with forces being inversely proportional to the implant angulation. The authors conclude that Novaloc may provide more reliable retention for SIOs due to their higher resistance to insertion-removal cycling.

Microbial adhesion and biofilm formation by Candida albicans on 3D-printed denture base resins.

This study evaluated surface properties and adhesion/biofilm formation by Candida albicans on 3D printed denture base resins used in 3D printing. Disc-shaped specimens (15 mm x 3 mm) of two 3D-printed resins (NextDent Denture 3D+, NE, n = 64; and Cosmos Denture, CO, n = 64) and a heat-polymerized resin (Lucitone 550, LU, control, n = 64) were analyzed for surface roughness (Ra µm) and surface free energy (erg cm-2). Microbiologic assays (90-min adhesion and 48-h biofilm formation by C. albicans) were performed five times in triplicate, with the evaluation of the specimens' surface for: (i) colony forming units count (CFU/mL), (ii) cellular metabolism (XTT assay), and (iii) fluorescence and thickness of biofilm layers (confocal laser scanning microscopy). Data were analyzed using parametric and nonparametric tests (α = 0.05). LU presented higher surface roughness Ra (0.329±0.076 µm) than NE (0.295±0.056 µm) (p = 0.024), but both were similar to CO (0.315±0.058 µm) (p = 1.000 and p = 0.129, respectively). LU showed lower surface free energy (47.47±2.01 erg cm-2) than CO (49.61±1.88 erg cm-2) and NE (49.23±2.16 erg cm-2) (p<0.001 for both). The CO and NE resins showed greater cellular metabolism (p<0.001) and CO only, showed greater colonization (p = 0.015) by C. albicans than LU in the 90-min and 48-hour periods. It can be concluded that both 3D-printed denture base resins are more prone to colonization by C. albicans, and that their surface free energy may be more likely associated with that colonization than their surface roughness.

Irrigants for non-surgical root canal treatment in mature permanent teeth.

BACKGROUND: Root canal treatment is carried out on teeth in which irreversible pulpitis has led to necrosis of the dental pulp. As a treatment option it is an alternative to dental extraction. Mechanical preparation and irrigation with antiseptic or antibacterial solutions destroys bacteria and cleans the infected root canal. Irrigants should be effective in deactivating bacteria in the entire root canal space without causing any adverse tissue reactions. Sodium hypochlorite (NaOCl) and chlorhexidine are commonly used but there is uncertainty as to which solution, concentration or combination is the most effective. OBJECTIVES: To assess the effects of irrigants used in the non-surgical root canal treatment of mature permanent teeth. SEARCH METHODS: We searched the Cochrane Oral Health Group's Trials Register (to 5 July 2012), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2012, Issue 4), MEDLINE via Ovid (1950 to 5 July 2012), EMBASE via Ovid (1980 to 5 July 2012), LILACS via BIREME (1980 to 5 July 2012). There were no restrictions regarding language or date of publication. SELECTION CRITERIA: Randomised controlled trials in single or multi-rooted permanent teeth with pulpal or periapical pathology or both, which require root canal treatment. Irrigants either against each other or against inactive irrigant or placebo. Combinations of irrigants were allowed and if used in conjunction with EDTA (ethylenediaminetetra-acetic acid) or similar chelating agents. DATA COLLECTION AND ANALYSIS: Two review authors independently assessed risk of bias of included trials and extracted data. MAIN RESULTS: We included 11 trials involving 851 participants with 879 teeth which had undergone root canal treatment and involved the use of irrigants. Two trials were assessed as being at low risk of bias, with six unclear and three high. Four trials compared sodium hypochlorite versus chlorhexidine, however, no primary outcomes and only one secondary outcome, bacterial growth cultures, was reported for two of these trials (20% and 50% of teeth in the control group had positive bacterial culture). The meta-analysis indicated no strong evidence of a difference in the existence of bacterial growth between the interventions (risk ratio 0.73; 95% confidence interval 0.34 to 1.56; P = 0.41). The seven remaining trials each compared different interventions and only two of these trials included useable data on the primary outcomes of swelling and pain. One trial compared sodium hypochlorite 5.25% alone versus sodium hypochlorite 5.25% combined with hydrogen peroxide 3%, and versus normal saline and reported pain at 3 to 14 days after the procedure. There was no evidence of a difference in pain between the three groups. The other trial compared sodium hypochlorite 5% versus sodium hypochlorite with 'proteolytic enzyme', and there was no evidence of a difference in swelling between the groups. Two further trials reported bacterial growth, and three trials failed to report any data which could be used in the review. None of the included trials reported any data on adverse effects nor radiological changes in periapical radiolucency. AUTHORS' CONCLUSIONS: Although root canal irrigants such as sodium hypochlorite and chlorhexidine appear to be effective at reducing bacterial cultures when compared to saline, most of the studies included in this review failed to adequately report these clinically important and potentially patient-relevant outcomes. There is currently insufficient reliable evidence showing the superiority of any one individual irrigant. The strength and reliability of the supporting evidence was variable and clinicians should be aware that changes in bacterial counts or pain in the early postoperative period may not be accurate indicators of long-term success. Future trials should report both clinician-relevant and patient-preferred outcomes at clearly defined perioperative, as well as long-term, time points.

Single crowns versus conventional fillings for the restoration of root filled teeth.

BACKGROUND: Endodontic treatment, involves removal of the dental pulp and its replacement by a root canal filling. Restoration of root filled teeth can be challenging due to structural differences between vital and non-vital root filled teeth. Direct restoration involves placement of a restorative material e.g. amalgam or composite directly into the tooth. Indirect restorations consist of cast metal or ceramic (porcelain) crowns. The choice of restoration depends on the amount of remaining tooth which may influence long term survival and cost. The comparative in service clinical performance of crowns or conventional fillings used to restore root filled teeth is unclear. OBJECTIVES: To assess the effects of restoration of endodontically treated teeth (with or without post and core) by crowns versus conventional filling materials. SEARCH METHODS: We searched the following databases: the Cochrane Oral Health Group's Trials Register, CENTRAL, MEDLINE via OVID, EMBASE via OVID, CINAHL via EBSCO, LILACS via BIREME and the reference lists of articles as well as ongoing trials registries.There were no restrictions regarding language or date of publication. Date of last search was 13 February 2012. SELECTION CRITERIA: Randomised controlled trials (RCTs) or quasi-randomised controlled trials in participants with permanent teeth which have undergone endodontic treatment. Single full coverage crowns compared with any type of filling materials for direct restoration, as well as indirect partial restorations (e.g. inlays and onlays). Comparisons considered the type of post and core used (cast or prefabricated post), if any. DATA COLLECTION AND ANALYSIS: Two review authors independently assessed trial quality and extracted data. MAIN RESULTS: One trial judged to be at high risk of bias due to missing outcome data, was included. 117 participants with a root filled premolar tooth restored with a carbon fibre post, were randomised to either a full coverage metal-ceramic crown or direct adhesive composite restoration. At 3 years there was no reported difference between the non-catastrophic failure rates in both groups. Decementation of the post and marginal gap formation occurred in a small number of teeth. AUTHORS' CONCLUSIONS: There is insufficient evidence to support or refute the effectiveness of conventional fillings over crowns for the restoration of root filled teeth. Until more evidence becomes available clinicians should continue to base decisions on how to restore root filled teeth on their own clinical experience, whilst taking into consideration the individual circumstances and preferences of their patients.

Interventions for the management of temporomandibular joint osteoarthritis.

BACKGROUND: Osteoarthritis (OA) is the most common form of arthritis of the temporomandibular joint (TMJ), and can often lead to severe pain in the orofacial region. Management options for TMJ OA include reassurance, occlusal appliances, physical therapy, medication in addition to several surgical modalities. OBJECTIVES: To investigate the effects of different surgical and non-surgical therapeutic options for the management of TMJ OA in adult patients. SEARCH METHODS: We searched the following databases: the Cochrane Oral Health Group Trials Register (to 26 September 2011); CENTRAL (The Cochrane Library 2011, Issue 3); MEDLINE via OVID (1950 to 26 September 2011); EMBASE via OVID (1980 to 26 September 2011); and PEDro (1929 to 26 September 2011). There were no language restrictions. SELECTION CRITERIA: Randomised controlled trials (RCTs) comparing any form of non-surgical or surgical therapy for TMJ OA in adults over the age of 18 with clinical and/or radiological diagnosis of TMJ OA according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) guideline or compatible criteria.Primary outcomes considered were pain/tenderness/discomfort in the TMJs or jaw muscles, self assessed range of mandibular movement and TMJ sounds. Secondary outcomes included the measurement of quality of life or patient satisfaction evaluated with a validated questionnaire, morphological changes of the TMJs assessed by imaging, TMJ sounds assessed by auscultation and any adverse effects. DATA COLLECTION AND ANALYSIS: Two review authors screened and extracted information and data from, and independently assessed the risk of bias in the included trials. MAIN RESULTS: Although three RCTs were included in this review, pooling of data in a meta-analysis was not possible due to wide clinical diversity between the studies. The reports indicate a not dissimilar degree of effectiveness with intra-articular injections consisting of either sodium hyaluronate or corticosteroid preparations, and an equivalent pain reduction with diclofenac sodium as compared with occlusal splints. Glucosamine appeared to be just as effective as ibuprofen for the management of TMJ OA. AUTHORS' CONCLUSIONS: In view of the paucity of high level evidence for the effectiveness of interventions for the management of TMJ OA, small parallel group RCTs which include participants with a clear diagnosis of TMJ OA should be encouraged and especially studies evaluating some of the possible surgical interventions.

Cytotoxicity of denture base and hard chairside reline materials: a systematic review.

STATEMENT OF PROBLEM: Adverse reactions to the materials used for the fabrication and reline of removable denture bases have been observed. PURPOSE: The purpose of this study was to systematically review the published literature on the cytotoxicity of denture base and hard reline materials. MATERIAL AND METHODS: MEDLINE via PubMed, Google Scholar, and Scopus databases for the period January 1979 to December 2009 were searched with the following key words: (biocompatibility OR cytotoxic* OR allergy OR "burning mouth" OR "cell culture techniques") AND ("acrylic resins" OR denture OR monomer OR relin* OR "denture liners"). The inclusion criteria included in vitro studies using either animal or human cells, in which the cytotoxicity of the denture base and hard chairside reline resins was tested. Studies of resilient lining materials and those that evaluated other parameters such as genotoxicity and mutagenicity were excluded. Articles published in the English language and in peer-reviewed journals focusing on the cytotoxicity of these materials were reviewed. RESULTS: A total of 1443 articles were identified through the search. From these, 20 studies were judged to meet the selection criteria and were included in the review. In the majority of the studies, continuous cell lines were exposed to eluates of specimens made from the materials, and mitochondrial activity was used to estimate cell viability. The tested acrylic resins were grouped according to 5 major categories: (1) heat-polymerized; (2) microwave-polymerized; (3) autopolymerizing; (4) light-polymerized; and (5) hard chairside reliners. CONCLUSIONS: This review provided some evidence that the heat-polymerized resins showed lower cytotoxic effects than autopolymerizing denture base acrylic resins and light or dual polymerized reline resins. However, because of the large number of variables in the reviewed literature, a definitive conclusion could not be drawn.

Evaluation of experimental cleanser solution of Ricinus communis: effect on soft denture liner properties.

OBJECTIVE: This study evaluated colour stability, hardness and roughness of soft denture liners after immersion in various cleansers. MATERIALS AND METHODS: Thirty specimens (14 mm × 4 mm) of Elite Soft Relining (ES) and Mucopren Soft (MS) were randomly immersed in distilled water at 37°C, sodium hypochlorite 1%, and an experimental Ricinus communis solution (RC) for 7, 15 and 183 continuous days. RESULTS: anova (p < 0.05) and Tukey's test indicated that after T7 (µ =8.79 ± 7.36); T15 (µ = 4.23 ± 2.62) and T183 (µ = 8.78 ± 3.16), MS presented a higher increase in hardness than ES. After T7, MS underwent an increase in roughness (µ = 0.09 ± 0.80); ES underwent a decrease (µ = -0.08 ± 0.16). RC caused the smallest variation in roughness. After T15, both materials presented an increase in roughness. After T183, ES (µ = -0.30 ± 0.48) presented a higher roughness variation than MS (µ = -0.07 ± 0.32). Hypochlorite caused an increase in roughness (µ = 0.02 ± 0.19). CONCLUSION: After all periods ES presented higher colour alteration than MS; highest colour alteration was caused by hypochlorite. Both materials were more stable after immersion in RC.

Validation of the Brazilian versions of two inventories for measuring oral health-related quality of life of edentulous subjects.

OBJECTIVES: To analyse the validity of the Brazilian versions of OHIP-EDENT and GOHAI as assessment tools of edentulous subjects' OHRQoL. BACKGROUND: Inventories for measuring oral health-related quality of life (OHRQoL) are important in clinical studies regarding oral rehabilitation. However, there is a need for comprehensive validation after translation into different cultural settings. MATERIALS AND METHODS: The sample comprised of 100 complete denture wearers (29 men, 71 women, mean age of 65.2 ± 9.9 years). The associations between each OHRQoL inventory and other variables served as measurements of construct validity. Data analysis comprised the Spearman correlation test as well as multiple regression using the OHRQoL inventories as dependent variables and the other scales as determinants. RESULTS: Both OHRQoL inventories showed good correlation with denture satisfaction, whereas lower correlation coefficients were found among the inventories and the HAD subscales. Denture satisfaction alone explained 48% and 39% of the variance found for the OHIP-EDENT and GOHAI, respectively, as assessed by multiple regression. A smaller effect was found for OHIP-EDENT. CONCLUSION: Both OHIP-EDENT and GOHAI showed good construct validity for measurement of OHRQoL of edentulous subjects.

Antimicrobial properties and cytotoxicity of an antimicrobial monomer for application in prosthodontics.

PURPOSE: This study aimed to investigate the antimicrobial properties and cytotoxicity of the monomer methacryloyloxyundecylpyridinium bromide (MUPB), an antiseptic agent capable of copolymerizing with denture base acrylic resins. MATERIALS AND METHODS: The antimicrobial activity of MUPB was tested against the species Candida albicans, Candida dubliniensis, Candida glabrata, Lactobacillus casei, Staphylococcus aureus, and Streptococcus mutans. The minimum inhibitory and fungicidal/bactericidal concentrations (MIC, MFC/MBC) of MUPB were determined by serial dilutions in comparison with cetylpyridinium chloride (CPC). The cytotoxic effects of MUPB at concentrations ranging from 0.01 to 1 g/L were assessed by MTT test on L929 cells and compared with methyl methacrylate (MMA). The antimicrobial activity of copolymerized MUPB was tested by means of acrylic resin specimens containing three concentrations of the monomer (0, 0.3, 0.6% w/w). Activity was quantified by means of a disc diffusion test and a quantification of adhered planktonic cells. Statistical analysis employed the Mann-Whitney test for MIC and MFC/MBC, and ANOVA for the microbial adherence test (α = 0.05). RESULTS: MUBP presented lower MIC values when compared with CPC, although differences were significant for C. dubliniensis and S. mutans only (p= 0.046 and 0.043, respectively). MFC/MBC values were similar for all species except C. albicans; in that case, MUPB presented significantly higher values (p = 0.046). MUPB presented higher cytotoxicity than MMA for all tested concentrations (p < 0.001) except at 0.01 g/L. Irrespective of the concentration incorporated and species, there was no inhibition halo around the specimens. The incorporation of MUPB influenced the adhesion of C. albicans only (p = 0.003), with lower CFU counts for the 0.6% group. CONCLUSIONS: It was concluded that non-polymerized MUPB has an antimicrobial capacity close to that of CPC and high cytotoxicity when compared with MMA. The antimicrobial activity of MUPB after incorporation within a denture base acrylic resin did not depend on its elution, but was shown to be restricted to C. albicans.