Entropy-Driven Reversible Melting and Recrystallization of Layered Hybrid Perovskites.

Typical layered 2D A2PbX4 (A: organic ammonium cation, X: Br, I) perovskites undergo irreversible decomposition at high temperatures. Can they be designed to melt at lower temperatures without decomposition? Which thermodynamic parameter drive the melting of layered perovskites? These questions are addressed by considering the melt of A2PbX4 as a mixture of ions (like ionic liquids), and hypothesized that the increase in the structural entropy of fusion (ΔSfus) will be the driving force to decrease their melting temperature. Then to increase structural ΔSfus, A-site cations are designed that are rigid in the solid crystal, and become flexible in the molten state. Different tail groups in the A-site cations form hydrogen-, halogen- and even covalent bonding-interactions, making the cation-layer rigid in the solid form. Additionally, the rotation of ─NH3 + head group is suppressed by replacing ─H with ─CH3, further enhancing the rigidity. Six A2PbX4 crystals with high ΔSfus and low melting temperatures are prepared using this approach. For example, [I-(CH2)3-NH2(CH3)]2PbI4 reversibly melts at 388 K (decomposition temperature 500 K), and then recrystallizes back upon cooling. Consequently, melt-pressed films are grown demonstrating the solvent- and vacuum-free perovskite films for future optoelectronic devices.

Ultrabroad Near Infrared Emitting Perovskites.

Phosphor converted light emitting diodes (pc-LEDs) have revolutionized solid-state white lighting by replacing energy-inefficient filament-based incandescent lamps. However, such a pc-LED emitting ultrabroad near-infrared (NIR) radiations still remains a challenge, primarily because of the lack of ultrabroad NIR emitting phosphors. To address this issue, we have prepared 2.5% W4+-doped and 2.8% Mo4+-doped Cs2Na0.95Ag0.05BiCl6 perovskites emitting ultrabroad NIR radiation with unprecedented spectral widths of 434 and 468 nm, respectively. Upon band-edge excitation, the soft lattice of the host exhibits broad self-trapped exciton (STE) emission covering NIR-I (680 nm), which then nonradiatively excites the dopants. The π-donor ligand Cl⁻ reduces the energy of dopant d-d transitions emitting NIR-II with a peak at ~950 nm. Vibronic coupling broadens the dopant emission. The large spin-orbit coupling and local structural distortion might possibly enhance the dopant emission intensity, leading to an overall NIR photoluminescence quantum yield ~40%. The composite of our ultrabroad NIR phosphors with biodegradable polymer polylactic acid could be processed into free-standing films and 3D printed structures. Large (170 × 170 mm2), robust, and thermally stable 3D printed pc-LED panels emit ultrabroad NIR radiation, demonstrating NIR imaging applications.

Virtual walks inspired by a mean-field kinetic exchange model of opinion dynamics.

We propose two different schemes of realizing a virtual walk corresponding to a kinetic exchange model of opinion dynamics. The walks are either Markovian or non-Markovian in nature. The opinion dynamics model is characterized by a parameter [Formula: see text] which drives an order disorder transition at a critical value [Formula: see text]. The distribution [Formula: see text] of the displacements [Formula: see text] from the origin of the walkers is computed at different times. Below [Formula: see text], two time scales associated with a crossover behaviour in time are detected, which diverge in a power law manner at criticality with different exponent values. [Formula: see text] also carries the signature of the phase transition as it changes its form at [Formula: see text]. The walks show the features of a biased random walk below [Formula: see text], and above [Formula: see text], the walks are like unbiased random walks. The bias vanishes in a power law manner at [Formula: see text] and the width of the resulting Gaussian function shows a discontinuity. Some of the features of the walks are argued to be comparable to the critical quantities associated with the mean-field Ising model, to which class the opinion dynamics model belongs. The results for the Markovian and non-Markovian walks are almost identical which is justified by considering the different fluxes. We compare the present results with some earlier similar studies. This article is part of the theme issue 'Kinetic exchange models of societies and economies'.

Lattice dynamics across the ferroelastic phase transition in Ba2ZnTeO6: a Raman and first-principles study.

Structural phase transitions drive several unconventional phenomena including some illustrious ferroic attributes which are relevant for technological advancements. On this note, we have investigated the ferroelastic structural transition of perovskite-type trigonal Ba2ZnTeO6 across Tc ∼ 150 K. With the help of Raman spectroscopy and density-functional theory (DFT)-based calculations, we report new intriguing observations associated with the phase transition in Ba2ZnTeO6. We observed the presence of a central peak (quasi-elastic Rayleigh profile), huge softening in the soft mode, hysteretic phonon behavior, and signatures of coexistent phases. The existence of a central peak in Ba2ZnTeO6 is manifested by a sharp rise in the intensity of the Rayleigh profile concomitant with the huge damping (or softening) of the soft mode (at ∼31 cm-1) near Tc, shedding light on the lattice dynamics during the phase transition. This is further corroborated by our phonon calculations that show that the soft mode (Eg) in the high-symmetry structure involving TeO6 octahedral rotation (with Ba and Zn translation) condenses into Ag and Bg modes in the C2/m low-symmetry phase. While most of the phonon bands split below Tc confirming the phase transition, we observed thermal hysteretic behavior of phonon modes, which signifies the first-order nature of the transition and the presence of coexisting phases as corroborated by our temperature-dependent X-ray diffraction and specific heat measurements.

Spin-phonon coupling in ferrimagnet spinel CoMn2O4.

Coupling of material properties provides new fundamental insights and possibilities toward multifunctional devices. The spinel structures display strong coupling between different order parameters, as a consequence, exhibiting many fascinating properties, such as multiferroicity and superconductivity. Here, we have investigated the structural, magnetic, and vibrational properties of mixed-spinel CoMn2O4 stabilized in distorted tetragonal structures as evidenced from x-ray diffraction measurements. Magnetization measurements reveal two ferrimagnetic phase transitions at 185 and 90 K. Raman scattering measurements reveal the renormalization of phonon parameters for a few phonon modes at low temperatures, arising from spin-phonon coupling. The obtained value for λS2 is ∼2 cm-1. The strength of spin-phonon coupling (λ) is estimated according to the spins involved in the corresponding lattice vibrations and discussed.

Sb3+ -Er3+ -Codoped Cs2 NaInCl6 for Emitting Blue and Short-Wave Infrared Radiation.

Cs2 NaInCl6 double perovskite is stable, environmentally benign and easy to prepare. But it has a wide band gap (5.1 eV), and therefore, does not show optical and optoelectronic properties in the visible and short-wave infrared (SWIR) region. Here we introduce such functionalities in Cs2 NaInCl6 by codoping Sb3+ (s-electron doping) and Er3+ (f-electron doping) ions. Sb3+ doping introduces optically allowed 5s2 → 5s1 5p1 electronic absorption at the sub-band gap level, which then emits blue photoluminescence with ≈93 % quantum yield. But f-f electronic absorption of Er3+ is parity forbidden. Codoping Sb3+ -Er3+ , leads to transfer of excitation energy from Sb3+ to Er3+ , yielding SWIR emission at 1540 nm. Temperature (6 to 300 K) dependent photoluminescence measurements elucidate the excitation and emission mechanism. A phosphor converted light emitting diode (pc-LED) fabricated by using the codoped sample emits stable blue and SWIR radiation over prolonged (84 hours) operation at 5.1 V.

Corrigendum: Robust resistive memory devices using solution-processable metal-coordinated azo aromatics.

This corrects the article DOI: 10.1038/nmat5009.

Robust resistive memory devices using solution-processable metal-coordinated azo aromatics.

Non-volatile memories will play a decisive role in the next generation of digital technology. Flash memories are currently the key player in the field, yet they fail to meet the commercial demands of scalability and endurance. Resistive memory devices, and in particular memories based on low-cost, solution-processable and chemically tunable organic materials, are promising alternatives explored by the industry. However, to date, they have been lacking the performance and mechanistic understanding required for commercial translation. Here we report a resistive memory device based on a spin-coated active layer of a transition-metal complex, which shows high reproducibility (∼350 devices), fast switching (≤30 ns), excellent endurance (∼1012 cycles), stability (>106 s) and scalability (down to ∼60 nm2). In situ Raman and ultraviolet-visible spectroscopy alongside spectroelectrochemistry and quantum chemical calculations demonstrate that the redox state of the ligands determines the switching states of the device whereas the counterions control the hysteresis. This insight may accelerate the technological deployment of organic resistive memories.

Influence of Edges and Interlayer Electron-phonon Coupling in WS2/h-BN Heterostructure.

The semiconducting layered transition metal dichalcogenides (e.g., WS2) are excellent candidates for the realization of optoelectronic and nanophotonic applications on account of their band gap tunability, high binding energy and oscillator strength of the excitons, strong light-matter interaction, appreciable charge carrier mobility, and valleytronic properties. However, the photoluminescence (PL) emissions are reported to show a nonuniform spatial distribution, with the edges emitting features like defect-bound excitons and biexcitons at low temperatures in addition to the typical excitons and trions. The appearance of these additional PL features has been shown in the literature to have a strong dependence on the presence of S-vacancies and excess charge carriers. We demonstrate an enhancement of the defect-bound excitons and biexcitons by creating a heterostructure of WS2 with h-BN where the coupling between the charge carriers in WS2 with the polar phonons in h-BN governs the enhancement. Furthermore, we have performed a comprehensive resonant Raman study with varying polarization and magnetic field which not only confirms the presence of electron-phonon coupling in WS2/h-BN heterostructure, it further demonstrates a thermally induced differential resonance behavior with the excitonic level and the defect-induced midgap states (due to S-vacancies at the edge of WS2) exhibited by a dome-shaped behavior of the Raman intensities with temperature for the normal and defect-induced phonon modes. The defect-bound Raman modes exhibit maximum resonance at ∼240 K while normal Raman modes show at ∼280 K owing to a thermal variation of the electronic states.

Treatment decision-making for localized prostate cancer: what younger men choose and why.

BACKGROUND AND OBJECTIVE: The literature lacks knowledge about information preferences and decision-making in young prostate cancer patients. This study provides insight into information sources consulted and factors dictating treatment decision-making in young prostate cancer patients. METHODS: Subjects were identified from pathology consult service of a National Center of Excellence. Questionnaires were mailed to 986 men, under 50 years of age, diagnosed with Gleason score 6 prostate cancer between 2001 and 2005. RESULTS: Four hundred ninety-three men responded. The most common primary therapies were surgery 397 (81.4%), radiation 52 (10.7%), and active surveillance (AS) 26 (5.3%). Participants with at least some college education (P = 0.003) or annual income >$100,000 (P = 0.003) were more likely to consult three or more doctors. Amongst all treatments, "doctor's recommendation" was the most influential information source, although relatively less important in the AS group. Internet was the second most frequent information source. Participants with higher education (P = 0.0003) and higher income (P = 0.002) considered sexual function more important while making a treatment choice. Only 2% of the men preferred a passive role in the decision-making. Informed decision-making was preferred more by patients who chose radiation and AS while shared decision-making was preferred more by surgery patients (P < 0.05). The majority (89%) of the respondents did not regret their decision. No difference in satisfaction levels was found between different treatment modalities. CONCLUSIONS: This study provides insight into information sources consulted, such as the greater internet use, and various factors dictating treatment decision-making in young prostate cancer patients. There was an overall very high satisfaction rate regardless of the therapy chosen.

Random walk with multiple memory channels.

A class of one-dimensional, discrete-time random walk models with memory, termed "random walk with n memory channels" (RWnMC), is proposed. In these models the information of n (n∈Z) previous steps from the walker's entire history is needed to decide a future step. Exact calculation of the mean and variance of position of the RW2MC (n=2) has been done, which shows that it can lead to asymptotic diffusive and superdiffusive behavior in different parameter regimes. A connection between RWnMC and a Pólya-type urn model evolving by drawing n balls at a time has also been reported. This connection for the RW2MC is discussed in detail and suggests the applicability of RW2MC in many population dynamics models with multiple competing species.

Electron-phonon coupling in APd3O4: A = Ca, Sr, and Sr0.85Li0.15.

Here we have investigated the role of electron phonon coupling on the Raman spectrum of narrow bandgap semiconductors APd3O4 (A = Ca, Sr) and hole-doped system Sr0.85Li0.15Pd3O4. Four Raman active phonons are observed at room temperature for all three compounds as predicted by factor group analysis. The lowest energy phonon (∼190/202 cm-1) associated with Pd vibrations is observed to exhibit an asymmetric Fano-like lineshape in all the three compounds, indicating the presence of an interaction between the phonon and the electronic continuum. The origin of the electronic continuum states and electron-phonon coupling are discussed based on our laser power- and temperature-dependent Raman results. We have observed an enhanced strength of electron-phonon coupling in Sr0.85Li0.15Pd3O4 at low temperatures which can be attributed to the metallicity in this doped compound.

Direct Bandgap-like Strong Photoluminescence from Twisted Multilayer MoS2 Grown on SrTiO3.

While direct bandgap monolayer 2D transition metal dichalcogenides (TMDs) have emerged as an important optoelectronic material due to strong light-matter interactions, their multilayer counterparts exhibit an indirect bandgap resulting in poor photon emission quantum yield. We report strong direct bandgap-like photoluminescence at ∼1.9 eV from multilayer MoS2 grown on SrTiO3, whose intensity is significantly higher than that observed in multilayer MoS2/SiO2. Using high-resolution electron microscopy we observe interlayer twist and >8% increase in the van der Waals gap, which leads to weaker interlayer coupling. This affects the evolution of the band structure in multilayer MoS2 as probed by transient absorption spectroscopy, causing higher photo carrier recombination at the direct gap. Our results provide a platform that could enable multilayer TMDs for robust optical device applications.

Polaronic Trions at the MoS2 /SrTiO3 Interface.

The reduced electrical screening in 2D materials provides an ideal platform for realization of exotic quasiparticles, that are robust and whose functionalities can be exploited for future electronic, optoelectronic, and valleytronic applications. Recent examples include an interlayer exciton, where an electron from one layer binds with a hole from another, and a Holstein polaron, formed by an electron dressed by a sea of phonons. Here, a new quasiparticle is reported, "polaronic trion" in a heterostructure of MoS2 /SrTiO3 (STO). This emerges as the Fröhlich bound state of the trion in the atomically thin monolayer of MoS2 and the very unique low energy soft phonon mode (≤7 meV, which is temperature and field tunable) in the quantum paraelectric substrate STO, arising below its structural antiferrodistortive (AFD) phase transition temperature. This dressing of the trion with soft phonons manifests in an anomalous temperature dependence of photoluminescence emission leading to a huge enhancement of the trion binding energy (≈70 meV). The soft phonons in STO are sensitive to electric field, which enables field control of the interfacial trion-phonon coupling and resultant polaronic trion binding energy. Polaronic trions could provide a platform to realize quasiparticle-based tunable optoelectronic applications driven by many body effects.

Fabrication of a biomimetic ZeinPDA nanofibrous scaffold impregnated with BMP-2 peptide conjugated TiO2 nanoparticle for bone tissue engineering.

A biomimetic Zein polydopamine based nanofiber scaffold was fabricated to deliver bone morphogenic protein-2 (BMP-2) peptide conjugated titanium dioxide nanoparticles in a sustained manner for investigating its osteogenic differentiation potential. To prolong its retention time at the target site, BMP-2 peptide has been conjugated to titanium dioxide nanoparticles owing to its high surface to volume ratio. The effect of biochemical cues from BMP-2 peptide and nanotopographical stimulation of electrospun Zein polydopamine nanofiber were examined for its enhanced osteogenic expression of human fetal osteoblast cells. The sustained delivery of bioactive signals, improved cell adhesion, mineralization, and differentiation could be attributed to its highly interconnected nanofibrous matrix with unique material composition. Further, the expression of osteogenic markers revealed that the fabricated nanofibrous scaffold possess better cell-biomaterial interactions. These promising results demonstrate the potential of the composite nanofibrous scaffold as an effective biomaterial substrate for bone regeneration.

Double-walled carbon nanotubes under hydrostatic pressure: Raman experiments and simulations.

We have used Raman spectroscopy to study the behavior of double-walled carbon nanotubes (DWNT) under hydrostatic pressure. We find that the rate of change of the tangential mode frequency with pressure is higher for the sample with traces of polymer compared to the pristine sample. We have performed classical molecular dynamics simulations to study the collapse of single (SWNT) and double-walled carbon nanotube bundles under hydrostatic pressure. The collapse pressure (pc) was found to vary as 1/R3, where R is the SWNT radius or the DWNT effective radius. The bundles showed approximately 30% hysteresis and the hexagonally close packed lattice was completely restored on decompression. The pc of a DWNT bundle was found to be close to the sum of its values for the inner and the outer tubes considered separately as SWNT bundles, demonstrating that the inner tube supports the outer tube and that the effective bending stiffness of DWNT, D(DWNT) - 2D(SWNT).

Irreversible pressure-induced transformation of boron nitride nanotubes.

We have used Raman spectroscopy to study the behavior of multi-walled boron nitride nanotubes and hexagonal boron nitride crystals under high pressure. While boron nitride nanotubes show an irreversible transformation at about 12 GPa, hexagonal boron nitride exhibits a reversible phase transition at 13 GPa. We also present molecular dynamics simulations which suggest that the irreversibility of the pressure-induced transformation in boron nitride nanotubes is due to the polar nature of the bonds between boron and nitrogen.

Magneto-Optical Study of Defect Induced Sharp Photoluminescence in LaAlO3 and SrTiO3.

Strongly correlated electronic systems such as Transition Metal Oxides often possess various mid-gap states originating from intrinsic defects in these materials. In this paper, we investigate an extremely sharp Photoluminescence (PL) transition originating from such defect states in two widely used perovskites, LaAlO3 and SrTiO3. A detailed study of the PL as a function of temperature and magnetic field has been conducted to understand the behavior and origin of the transition involved. The temperature dependence of the PL peak position for SrTiO3 is observed to be opposite to that in LaAlO3. Our results reveal the presence of a spin/orbital character in these transitions which is evident from the splitting of these defect energy levels under a high magnetic field. These PL transitions have the potential for enabling non-contact thermal and field sensors.

Surface energy and wettability of van der Waals structures.

The wetting behaviour of surfaces is believed to be affected by van der Waals (vdW) forces; however, there is no clear demonstration of this. With the isolation of two-dimensional vdW layered materials it is possible to test this hypothesis. In this paper, we report the wetting behaviour of vdW heterostructures which include chemical vapor deposition (CVD) grown graphene, molybdenum disulfide (MoS2) and tungsten disulfide (WS2) on few layers of hexagon boron nitride (h-BN) and SiO2/Si. Our study clearly shows that while this class of two-dimensional materials are not completely wetting transparent, there seems to be a significant amount of influence on their wetting properties by the underlying substrate due to dominant vdW forces. Contact angle measurements indicate that graphene and graphene-like layered transitional metal dichalcogenides invariably have intrinsically dispersive surfaces with a dominating London-vdW force-mediated wettability.

Long-range magnetic coupling across a polar insulating layer.

Magnetic interactions in solids are normally mediated by short-range exchange or weak dipole fields. Here we report a magnetic interaction that can propagate over long distances (∼10 nm) across a polar insulating oxide spacer. Evidence includes oscillations of magnetization, coercivity and field-cooled loop shift with the thickness of LaAlO3 in La0.67Sr0.33MnO3/LaAlO3/SrTiO3 heterostructures. Similar modifications of the hysteresis loop appear when two coupled films of La0.67Sr0.33MnO3 are separated by LaAlO3, or another polar insulator, but they are absent when the oxide spacer layer is nonpolar. The loop shift is attributed to strong spin-orbit coupling and Dzyaloshinskii-Moriya interaction at the interfaces. There is evidence from inelastic light scattering that the polar spacer mediates long-range transmission of orbital magnetization. This coupling mechanism is expected to apply for any conducting ferromagnetic oxide with mixed valence; in view of electron hopping frequency involved, it raises the prospect of terahertz tunability of magnetic coupling.