RESUMO
Four new compositionally complex perovskites with multiple (four or more) cations on the B site of the perovskites have been studied. The materials have the general formula La0.5Sr2.5(M)2O7-δ (M = Ti, Mn, Fe, Co, and Ni) and have been synthesized via conventional solid-state synthesis. The compounds are the first reported examples of compositionally complex n = 2 Ruddlesden-Popper perovskites. The structure and properties of the materials have been determined using powder X-ray diffraction, neutron diffraction, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and magnetometry. The materials are isostructural and adopt the archetypal I4/mmm space group with the following unit cell parameters: a â¼ 3.84 Å, and c â¼ 20.1 Å. The measured compositions from energy dispersive X-ray spectroscopy were La0.51(2)Sr2.57(7)Ti0.41(2)Mn0.41(2)Fe0.39(2)Co0.38(1)Ni0.34(1)O7-δ, La0.59(4)Sr2.29(23)Mn0.58(5)Fe0.56(6)Co0.55(6)Ni0.42(4)O7-δ, La0.54(2)Sr2.49(13)Mn0.41(2)Fe0.81(5)Co0.39(3)Ni0.36(3)O7-δ, and La0.53(4)Sr2.55(19)Mn0.67(6)Fe0.64(5)Co0.31(2)Ni0.30(3)O7-δ. No magnetic contribution is observed in the neutron diffraction data, and magnetometry indicates a spin glass transition at low temperatures.
RESUMO
The new ternary compounds La15Ni13Bi5 and La9Ni8Sn5 were obtained by arc melting under argon from appropriate amounts of the elements and subsequent annealing at 800 °C for 2 weeks. Single-crystal X-ray diffraction reveals that they represent two new structure types: La15Ni13Bi5 crystallizes in the hexagonal space group P62m [hP33, a = 14.995(3), c = 4.3421(10) Å, V = 845.5(4) Å3, Z = 1] and La9Ni8Sn5 in P63/m [hP88, a = 23.870(15), c = 4.433(3) Å, V = 2187(3) Å3, Z = 4]. The crystal structures of both compounds are characterized by hexagonal honeycomb-based motifs formed by Ni and Sn that extend along the c axis. The building motif with its three-blade wind turbine shape is reminiscent of the organic molecule triptycene and is unprecedented in extended solids. First-principles calculations have been performed in order to analyze the electronic structure and provide insight into chemical bonding. They reveal significant electron transfer from La to Ni and the respective p-element, which supports the formation of the polyanionic Ni-p-element network. DFT calculations suggest paramagnetic-like behavior for both compounds, which was confirmed by magnetic measurements.
RESUMO
The atomic and magnetic structures of Mn(Co,Ge)2 are reported herein. The system crystallizes in the space group P63/mmc as a superstructure of the MgZn2-type structure. The system exhibits two magnetic transitions with associated magnetic structures, a ferromagnetic (FM) structure around room temperature, and an incommensurate structure at lower temperatures. The FM structure, occurring between 193 and 329 K, is found to be a member of the magnetic space group P63/mm'c'. The incommensurate structure found below 193 K is helical with propagation vector k = (0 0 0.0483). Crystallographic results are corroborated by magnetic measurements and ab initio calculations.
RESUMO
A number of high-entropy alloys (HEAs) in the TiVZrNbHf system have been synthesized by arc melting and systematically evaluated for their hydrogen sorption characteristics. A total of 21 alloys with varying elemental compositions were investigated, and 17 of them form body-centered-cubic (bcc) solid solutions in the as-cast state. A total of 15 alloys form either face-centered-cubic (fcc) or body-centered-tetragonal (bct) hydrides after exposure to gaseous hydrogen with hydrogen per metal ratios (H/M) as high as 2.0. Linear trends are observed between the volumetric expansion per metal atom [(V/Z)fcc/bct - (V/Z)bcc/hcp]/(V/Z)bcc/hcp with the valence electron concentration and average Pauling electronegativity (χp) of the alloys. However, no correlation was observed between the atomic size mismatch, δ, and any investigated hydrogen sorption property such as the maximum storage capacity or onset temperature for hydrogen release.
RESUMO
Al0.10Ti0.30V0.25Zr0.10Nb0.25 was prepared to evaluate the effect of 10% aluminum into the previously reported quaternary alloy, Ti0.325V0.275Zr0.125Nb0.275. The as-cast quinary alloy formed a single-phase body centered cubic solid solution and transformed into a body centered tetragonal after hydrogenation. The alloy had a storage capacity of 1.6 H/M (2.6 wt.%) with fast absorption kinetics at room temperature, reaching full capacity within the first 10 min. The major improvements of Al addition (10%) were related to the desorption and cycling properties of the material. The temperature for hydrogen release was significantly decreased by around 100 °C, and the quinary alloy showed superior cycling stability and higher reversible storage capacity than its quaternary counterpart, 94% and 85% of their respective initial capacity, after 20 hydrogenation cycles without phase decomposition.
RESUMO
The multicomponent alloy HfNbTiVZr has been described as a single-phase high-entropy alloy (HEA) in the literature, although some authors have reported that additional phases can form during annealing. The thermal stability of this alloy has therefore been investigated with a combination of experimental annealing studies and thermodynamic calculations using the CALPHAD approach. The thermodynamic calculations show that a single-phase HEA is stable above about 830 °C. At lower temperatures, the most stable state is a phase mixture of bcc, hcp, and a cubic C15 Laves phase. Annealing experiments followed by quenching confirm the results from thermodynamic calculations with the exception of the Laves phase structure, which was identified as a hexagonal C14 type instead of the cubic C15 type. Limitations of the applied CALPHAD thermodynamic description of the system could be an explanation for this discrepancy. As-synthesized HfNbTiVZr alloys prepared by arc-melting form a single-phase bcc HEA at room temperature. In situ annealing studies of this alloy show that additional phases start to form above 600 °C. This indicates that the observed HEA is metastable at room temperature and stabilized by a slow kinetics during cooling. X-ray diffraction analyses using different cooling rates and annealing times show that the phase transformations in this HEA are slow and that completely different phase compositions can be obtained depending on the annealing procedure. In addition, it has been shown that the sample preparation method (mortar grinding, heat treatment, etc.) has a significant influence on the collected diffraction patterns and therefore on the phase identification and analysis.
RESUMO
While the overwhelming number of papers on multi-principal-element alloys (MPEAs) focus on the mechanical and microstructural properties, there has been growing interest in these alloys as solid-state hydrogen stores. We report here the synthesis optimization, the physicochemical and the hydrogen sorption properties of Ti0.325V0.275Zr0.125Nb0.275. This alloy was prepared by two methods, high temperature arc melting and ball milling under Ar, and crystallizes into a single-phase bcc structure. This MPEA shows a single transition from the initial bcc phase to a final bct dihydride and a maximum uptake of 1.7 H/M (2.5 wt%). Interestingly, the bct dihydride phase can be directly obtained by reactive ball milling under hydrogen pressure. The hydrogen desorption properties of the hydrides obtained by hydrogenation of the alloy prepared by arc melting or ball milling and by reactive ball milling have been compared. The best hydrogen sorption properties are shown by the material prepared by reactive ball milling. Despite a fading of the capacity for the first cycles, the reversible capacity of the latter material stabilizes around 2 wt%. To complement the experimental approach, a theoretical investigation combining a random distribution technique and first principle calculation was done to estimate the stability of the hydride.
Assuntos
Ligas/química , Hidrogênio/química , Nanoestruturas/química , Adsorção , Ligas/síntese química , Cristalização , Teste de Materiais , Propriedades de Superfície , Vanádio/químicaRESUMO
The substitutional effects of cobalt in (Fe1-xCox)5PB2 have been studied with respect to crystalline structure and chemical order with X-ray diffraction and Mössbauer spectroscopy. The magnetic properties have been determined from magnetic measurements, and density functional theory calculations have been performed for the magnetic properties of both the end compounds, as well as the chemically disordered intermediate compounds. The crystal structure of (Fe1-xCox)5PB2 is tetragonal (space group I4/mcm) with two different metal sites, with a preference for cobalt atoms in the M(2) position (4c) at higher cobalt contents. The substitution also affects the magnetic properties with a decrease of the Curie temperature (TC) with increasing cobalt content, from 622 to 152 K for Fe5PB2 and (Fe0.3Co0.7)5PB2, respectively. Thus, the Curie temperature is dependent on composition, and it is possible to tune TC to a temperature near room temperature, which is one prerequisite for magnetic cooling materials.
RESUMO
A high-entropy alloy (HEA) of HfNbTiVZr was synthesized using an arc furnace followed by ball milling. The hydrogen absorption mechanism was studied by in situ X-ray diffraction at different temperatures and by in situ and ex situ neutron diffraction experiments. The body centered cubic (BCC) metal phase undergoes a phase transformation to a body centered tetragonal (BCT) hydride phase with hydrogen occupying both tetrahedral and octahedral interstitial sites in the structure. Hydrogen cycling of the alloy at 500 °C is stable. The large lattice strain in the HEA seems favorable for absorption in both octahedral and tetrahedral sites. HEAs therefore have potential as hydrogen storage materials because of favorable absorption in all interstitial sites within the structure.
RESUMO
A novel synthesis method, "arc-melting-self-flux", has been developed and a series of five Tsai-type 1/1 approximant crystals in the Tb-Au-Si system have been synthesized. The synthesis method, by employing a temperature program which oscillates near the melting and nucleation points of the approximants, has provided high-quality and large single crystals in comparison to those obtained from the standard arc-melting-annealing and self-flux methods. The atomic structures of the approximants have been determined from single-crystal X-ray diffraction data and described using concentric atomic clusters with icosahedral symmetry. The compounds are nearly isostructural with subtle variations; two types of atomic clusters which mainly vary at their cluster centers are observed. One type contains a Tb site at the center, and the other contains a disordered tetrahedron decorated with Au/Si mixed sites. Both cluster types can be found coexisting in the approximants. The compounds have different average weighted ratios of central Tb to disordered tetrahedron in the bulk material. Furthermore, a strategy for chemically tuning magnetic behavior is presented. Magnetic property measurements on the approximants revealed that the magnetic transition temperature (Tc) decreases as the occupancy of the central Tb site increases. Tc decreased from 11.5 K for 0% occupancy of the central Tb to 8 K for 100% occupancy. Enhanced magneto crystalline anisotropy is observed for the approximants with higher central Tb occupancy in comparison to their low central Tb occupancy counterparts. Hence, the previously reported "ferrimagnetic-like" magnetic structure model remains valid.
RESUMO
The hydride NdGaH1+x (x ≈ 0.66) and its deuterized analogue were obtained by sintering the Zintl phase NdGa with the CrB structure in a hydrogen atmosphere at pressures of 10-20 bar and temperatures near 300 °C. The system NdGa/NdGaH1+x exhibits reversible H storage capability. H uptake and release were investigated by kinetic absorption measurements and thermal desorption mass spectroscopy, which showed a maximum H concentration corresponding to "NdGaH2" (0.93 wt % H) and a two-step desorption process, respectively. The crystal structure of NdGaH1+x was characterized by neutron diffraction (P21/m, a = 4.1103(7), b = 4.1662(7), c = 6.464(1) Å, ß = 108.61(1)° Z = 2). H incorporates in NdGa by occupying two distinct positions, H1 and H2. H1 is coordinated in a tetrahedral fashion by Nd atoms. The H2 position displays flexible occupancy, and H2 atoms attain a trigonal bipyramidal coordination by centering a triangle of Nd atoms and bridging two Ga atoms. The phase stability and electronic structure of NdGaH1+x were analyzed by first-principles DFT calculations. NdGaH1H2 (NdGaH2) may be expressed as Nd(3+)(H1(-))[GaH2](2-). The two-dimensional polyanion [GaH](2-) features linear -H-Ga-H-Ga- chains with alternating short (1.8 Å) and long (2.4 Å) Ga-H distances, which resembles a Peierls distortion. H2 deficiency (x < 1) results in the fragmentation of chains. For x = 0.66 arrangements with five-atom moieties, Ga-H-Ga-H-Ga are energetically most favorable. From magnetic measurements, the Curie-Weiss constant and effective magnetic moment of NdGaH1.66 were obtained. The former indicates antiferromagnetic interactions, and the latter attains a value of â¼3.6 µB, which is typical for compounds containing Nd(3+) ions.
RESUMO
MnAl(C) is a promising candidate as a rare earth free magnet. When processing MnAl(C) in laser powder bed fusion (L-PBF) the high cooling rates can retain the high temperature ε-phase which can then be annealed at low temperatures to yield the ferromagnetic τ-phase. However, MnAl(C) has been shown to be difficult to print using L-PBF and the material is prone to severe cracking. In this study, we have investigated how the addition of a graphene oxide (GO) coating on the powders can affect the processability of MnAl(C) and properties of the printed parts. MnAl(C) powders were coated with 0.2 wt.% GO using a wet-chemical process. The addition of GO reduced crack formation in the printed parts, and also influenced the degree of [Formula: see text] texture along the build direction. After printing, densities of 93% and 87% could be achieved for the reference and 0.2 wt.% GO, respectively. Furthermore, a 35% reduction of cracking was calculated from image analysis, comparing printed samples produced from coated and non-coated powders. Both powders formed mostly the ε-phase but some two-phase regions with a mix of γ- and ε-phase could be observed in the as-printed parts, but seemed to be more prominent in the uncoated reference samples and could also be linked to cracks. The τ-phase together with smaller amounts of secondary phases was obtained after heat treatment at 560 °C for 5 min for both samples. Vibrating sample magnetometry was used to measure the magnetic properties, the reference had a remanence of 33 Am2/kg and a coercivity of 139 kA/m, and the 0.2 wt.% GO sample showed a similar remanence of 30 Am2/kg and coercivity of 130 kA/m. These results show that GO coating is a viable method to reduce detrimental cracking in L-PBF MnAl without reducing the magnetic performance of the material.
RESUMO
NdGa hydride and deuteride phases were prepared from high-quality NdGa samples and their structures characterized by powder and single-crystal X-ray diffraction and neutron powder diffraction. NdGa with the orthorhombic CrB-type structure absorbs hydrogen at hydrogen pressures ≤â 1â bar until reaching the composition NdGaH(D)1.1, which maintains a CrB-type structure. At elevated hydrogen pressure additional hydrogen is absorbed and the maximum composition recovered under standard temperature and pressure conditions is NdGaH(D)1.6 with the Cmcm LaGaH1.66-type structure. This structure is a threefold superstructure with respect to the CrB-type structure. The hydrogen atoms are ordered and distributed on three fully occupied Wyckoff positions corresponding to tetrahedral (4c, 8g) and trigonal-bipyramidal (8g) voids in the parent structure. The threefold superstructure is maintained in the H-deficient phases NaGaH(D)x until 1.6 ≥ x ≥ 1.2. At lower H concentrations, coinciding with the composition of the hydride obtained from hydrogenation at atmospheric pressure, the unit cell of the CrB-type structure is resumed. This phase can also display H deficiency, NdGaH(D)y (1.1 ≥ y ≥ 0.9), with H(D) exclusively situated in partially empty tetrahedral voids. The phase boundary between the threefold superstructure (LaGaH1.66 type) and the onefold structure (NdGaH1.1 type) is estimated on the basis of phase-composition isotherms and neutron powder diffraction to be x = 1.15.
RESUMO
Metallic glasses exhibit unique mechanical properties. For metallic glass composites (MGC), composed of dispersed nanocrystalline phases in an amorphous matrix, these properties can be enhanced or deteriorated depending on the volume fraction and size distribution of the crystalline phases. Understanding the evolution of crystalline phases during devitrification of bulk metallic glasses upon heating is key to realizing the production of these composites. Here, results are presented from a combination of in situ small- and wide-angle X-ray scattering (SAXS and WAXS) measurements during heating of Zr-based metallic glass samples at rates ranging from 102 to 104 Ks-1 with a time resolution of 4ms. By combining a detailed analysis of scattering experiments with numerical simulations, for the first time, it is shown how the amount of oxygen impurities in the samples influences the early stages of devitrification and changes the dominant nucleation mechanism from homogeneous to heterogeneous. During melting, the oxygen rich phase becomes the dominant crystalline phase whereas the main phases dissolve. The approach used in this study is well suited for investigation of rapid phase evolution during devitrification, which is important for the development of MGC.
RESUMO
We report two new variants of the X-phase (orthorhombic, space group Pnnm) derived from the Mn-Co-Ge system. Two compositionally related crystals were investigated by means of single-crystal X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The Mn14.9Co15.5Ge6.6 and Mn14Co16.2Ge6.8 intermetallic compounds are part of the homogeneity region of the X-phase and adopt the Mn14(Mn0.11Co0.64Si0.25)23 structure type. The composition obtained from refinement of the XRD data is in agreement with the EDS results. In the present study, chemical disorder was only detected on the 8h positions. The ordering is compared with other members of the X-phase family and shows that the degree of disordering depends on the chemical composition. No completely ordered variants of the X-phase have yet been reported.
RESUMO
Alloys of Mn55Al45C2 with additions of VC nano-particles have been synthesized and their properties evaluated. The Mn55Al45C2(VC)x (x = 0.25, 0.5 and 1) alloys have been prepared by induction melting resulting in a high content of the ferromagnetic τ-phase (> 94 wt.%). Powder X-ray diffraction indicates that nano-VC can be dissolved in the alloy matrix up to 1 at.%. On the other side, metallography investigations by scanning electron microscopy and scanning transmission electron microscope show inclusions of the nanosized additives in the microstructure. The effect of nano-VC on the grain and twin boundaries has been studied by electron backscattering diffraction. The magnetization has been measured by magnetometry up to 9 T while the domain structure has been studied using both magnetic force microscopy as well as Kerr-microscopy. For nano-VC contents above 0.25 at.%, a clear increase of the coercive force is observed, from 57 to 71 kA/m. The optimum appears to be for 0.5 at.% nano-VC which shows a 25% increase in coercive force without losing any saturation magnetization. This independent increase in coercivity is believed to originate from the nano-VC reducing the overall magnetic domain size. Overall, we observe that addition of nano-VC could be an interesting route to increase the coercive force of MnAl, without sacrificing saturation magnetization.
RESUMO
Scandium magnesium gallide, Sc(2)MgGa(2), and yttrium magnesium gallide, Y(2)MgGa(2), were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo(2)FeB(2)-type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc(2)MgGa(2 )was determined from single-crystal diffraction intensities and the isostructural Y(2)MgGa(2) was identified from powder diffraction data.
RESUMO
The low cost, rare earth free τ-phase of MnAl has high potential to partially replace bonded Nd2Fe14B rare earth permanent magnets. However, the τ-phase is metastable and it is experimentally difficult to obtain powders suitable for the permanent magnet alignment process, which requires the fine powders to have an appropriate microstructure and high τ-phase purity. In this work, a new method to make high purity τ-phase fine powders is presented. A high purity τ-phase Mn0.55Al0.45C0.02 alloy was synthesized by the drop synthesis method. The drop synthesized material was subjected to cryo milling and followed by a flash heating process. The crystal structure and microstructure of the drop synthesized, cryo milled and flash heated samples were studied by X-ray in situ powder diffraction, scanning electron microscopy, X-ray energy dispersive spectroscopy and electron backscatter diffraction. Magnetic properties and magnetic structure of the drop synthesized, cryo milled, flash heated samples were characterized by magnetometry and neutron powder diffraction, respectively. The results reveal that the 2 and 4 hours cryo milled and flash heated samples both exhibit high τ-phase purity and micron-sized round particle shapes. Moreover, the flash heated samples display high saturation magnetization as well as increased coercivity.
RESUMO
Metal hydrides (MHx) provide a promising solution for the requirement to store large amounts of hydrogen in a future hydrogen-based energy system. This requires the design of alloys which allow for a very high H/M ratio. Transition metal hydrides typically have a maximum H/M ratio of 2 and higher ratios can only be obtained in alloys based on rare-earth elements. In this study we demonstrate, for the first time to the best of our knowledge, that a high entropy alloy of TiVZrNbHf can absorb much higher amounts of hydrogen than its constituents and reach an H/M ratio of 2.5. We propose that the large hydrogen-storage capacity is due to the lattice strain in the alloy that makes it favourable to absorb hydrogen in both tetrahedral and octahedral interstitial sites. This observation suggests that high entropy alloys have future potential for use as hydrogen storage materials.
RESUMO
Electrodes composed of freestanding nano- and microrods composed of stacked layers of copper and cuprous oxide have been fabricated using a straightforward one-step template-assisted pulsed galvanostatic electrodeposition approach. The approach provided precise control of the thickness of each individual layer of the high-aspect-ratio rods as was verified by SEM, EDS, XRD, TEM and EELS measurements. Rods with diameters of 80, 200 and 1000 nm were deposited and the influence of the template pore size on the structure and electrochemical performance of the conversion reaction based electrodes in lithium-ion batteries was investigated. The multi-layered Cu2O/Cu nano- and microrod electrodes exhibited a potential window of more than 2 V, which was ascribed to the presence of a distribution of Cu2O (and Cu, respectively) nanoparticles with different sizes and redox potentials. As approximately the same areal capacity was obtained independent of the diameter of the multi-layered rods the results demonstrate the presence of an electroactive Cu2O layer with a thickness defined by the time domain of the measurements. It is also demonstrated that while the areal capacity of the electrodes decreased dramatically when the scan rate was increased from 0.1 to 2 mV s(-1), the capacity remained practically constant when the scan rate was further increased to 100 mV s(-1). This behaviour can be explained by assuming that the capacity is limited by the lithium ion diffusion rate though the Cu2O layer generated during the oxidation step. The electrochemical performance of present type of 3-D multi-layered rods provides new insights into the lithiation and delithiation reactions taking place for conversion reaction materials such as Cu2O.