Monolignol export by diffusion down a polymerization-induced concentration gradient.

Lignin, the second most abundant biopolymer, is a promising renewable energy source and chemical feedstock. A key element of lignin biosynthesis is unknown: how do lignin precursors (monolignols) get from inside the cell out to the cell wall where they are polymerized? Modeling indicates that monolignols can passively diffuse through lipid bilayers, but this has not been tested experimentally. We demonstrate significant monolignol diffusion occurs when laccases, which consume monolignols, are present on one side of the membrane. We hypothesize that lignin polymerization could deplete monomers in the wall, creating a concentration gradient driving monolignol diffusion. We developed a two-photon microscopy approach to visualize lignifying Arabidopsis thaliana root cells. Laccase mutants with reduced ability to form lignin polymer in the wall accumulated monolignols inside cells. In contrast, active transport inhibitors did not decrease lignin in the wall and scant intracellular phenolics were observed. Synthetic liposomes were engineered to encapsulate laccases, and monolignols crossed these pure lipid bilayers to form polymer within. A sink-driven diffusion mechanism explains why it has been difficult to identify genes encoding monolignol transporters and why the export of varied phenylpropanoids occurs without specificity. It also highlights an important role for cell wall oxidative enzymes in monolignol export.

Overcoming the challenges of preserving lipid-rich Cannabis sativa L. glandular trichomes for transmission electron microscopy.

Cannabis glandular trichomes produce and store an abundance of lipidic specialised metabolites (e.g. cannabinoids and terpenes) that are consumed by humans for medicinal and recreational purposes. Due to a lack of genetic resources and inherent autofluorescence of cannabis glandular trichomes, our knowledge of cannabinoid trafficking and secretion is limited to transmission electron microscopy (TEM). Advances in cryofixation methods has resulted in ultrastructural observations closer to the 'natural state' of the living cell, and recent reports of cryofixed cannabis trichome ultrastructure challenge the long-standing model of cannabinoid trafficking proposed by ultrastructural reports using chemically fixed samples. Here, we compare the ultrastructural morphology of cannabis glandular trichomes preserved using conventional chemical fixation and ultrarapid cryofixation. We show that chemical fixation results in amorphous metabolite inclusions surrounding the organelles of glandular trichomes that were not present in cryofixed samples. Vacuolar morphology in cryofixed samples exhibited homogenous electron density, while chemically fixed samples contained a flocculent electron dense periphery and electron lucent lumen. In contrast to the apparent advantages of cryopreservation, fine details of cell wall fibre orientation could be observed in chemically fixed glandular trichomes that were not seen in cryofixed samples. Our data suggest that chemical fixation results in intracellular artefacts that impact the interpretation of lipid production and trafficking, while enabling greater detail of extracellular polysaccharide organisation.

Functional characterization of a cellulose synthase, CtCESA1, from the marine red alga Calliarthron tuberculosum (Corallinales).

In land plants and algae, cellulose is important for strengthening cell walls and preventing breakage due to physical forces. Though our understanding of cellulose production by cellulose synthases (CESAs) has seen significant advances for several land plant and bacterial species, functional characterization of this fundamental protein is absent in red algae. Here we identify CESA gene candidates in the calcifying red alga Calliarthron tuberculosum using sequence similarity-based approaches, and elucidate their phylogenetic relationship with other CESAs from diverse taxa. One gene candidate, CtCESA1, was closely related to other putative red algal CESA genes. To test if CtCESA1 encoded a true cellulose synthase, CtCESA1 protein was expressed and purified from insect and yeast expression systems. CtCESA1 showed glucan synthase activity in glucose tracer assays. CtCESA1 activity was relatively low when compared with plant and bacterial CESA activity. In an in vitro assay, a predicted N-terminal starch-binding domain from CtCESA1 bound red algal floridean starch extracts, representing a unique domain in red algal CESAs not present in CESAs from other lineages. When the CtCESA1 gene was introduced into Arabidopsis thaliana cesa mutants, the red algal CtCESA1 partially rescued the growth defects of the primary cell wall cesa6 mutant, but not cesa3 or secondary cell wall cesa7 mutants. A fluorescently tagged CtCESA1 localized to the plasma membrane in the Arabidopsis cesa6 mutant background. This study presents functional evidence validating the sequence annotation of red algal CESAs. The relatively low activity of CtCESA1, partial complementation in Arabidopsis, and presence of unique protein domains suggest that there are probably functional differences between the algal and land plant CESAs.

The Class II KNOX genes KNAT3 and KNAT7 work cooperatively to influence deposition of secondary cell walls that provide mechanical support to Arabidopsis stems.

The transcription factor KNOTTED ARABIDOPSIS THALIANA7 (KNAT7) is a Class II KNOTTED1-like homeobox (KNOX2) gene that, in interfascicular fibres, acts as a negative regulator of secondary cell wall biosynthesis. In addition, knat7 loss-of-function mutants display an irregular xylem (irx) phenotype, suggesting a potential positive regulatory role in xylem vessel secondary cell wall deposition. Although our understanding of the role of KNAT7 is evolving, the function(s) of the closely related KNOX2 genes, KNAT3, KNAT4, and KNAT5, in secondary wall formation still remain unclear. We found that all four Arabidopsis KNOX2 genes were expressed in the inflorescence stems. However, only the knat3 knat7 double mutants showed a phenotype, displaying an enhanced irx phenotypes relative to the single mutants, as well as decreased interfascicular fibre cell wall thickness. Moreover, knat3 knat7 double mutants had reduced stem tensile and flexural strength compared with wild-type and single mutants. In contrast, KNAT3 overexpression resulted in thicker interfascicular fibre secondary cell walls in inflorescence stems, suggesting a potential positive regulation in interfascicular fibre secondary wall development. This work identifies KNAT3 as a potential transcriptional activator working together with KNAT7 to promote secondary cell wall biosynthesis in xylem vessels, while concurrently acting antagonistically with KNAT7 to influence secondary wall formation in interfascicular fibres.

Cannabis glandular trichomes alter morphology and metabolite content during flower maturation.

The cannabis leaf is iconic, but it is the flowers of cannabis that are consumed for the psychoactive and medicinal effects of their specialized metabolites. Cannabinoid metabolites, together with terpenes, are produced in glandular trichomes. Superficially, stalked and sessile trichomes in cannabis only differ in size and whether they have a stalk. The objectives of this study were: to define each trichome type using patterns of autofluorescence and secretory cell numbers, to test the hypothesis that stalked trichomes develop from sessile-like precursors, and to test whether metabolic specialization occurs in cannabis glandular trichomes. A two-photon microscopy technique using glandular trichome intrinsic autofluorescence was developed which demonstrated that stalked glandular trichomes possessed blue autofluorescence correlated with high cannabinoid levels. These stalked trichomes had 12-16 secretory disc cells and strongly monoterpene-dominant terpene profiles. In contrast, sessile trichomes on mature flowers and vegetative leaves possessed red-shifted autofluorescence, eight secretory disc cells and less monoterpene-dominant terpene profiles. Moreover, intrinsic autofluorescence patterns and disc cell numbers supported a developmental model where stalked trichomes develop from apparently sessile trichomes. Transcriptomes of isolated floral trichomes revealed strong expression of cannabinoid and terpene biosynthetic genes, as well as uncharacterized genes highly co-expressed with CBDA synthase. Identification and characterization of two previously unknown and highly expressed monoterpene synthases highlighted the metabolic specialization of stalked trichomes for monoterpene production. These unique properties and highly expressed genes of cannabis trichomes determine the medicinal, psychoactive and sensory properties of cannabis products.

Cannabis Glandular Trichome Cell Walls Undergo Remodeling to Store Specialized Metabolites.

The valuable cannabinoid and terpenoid metabolites of Cannabis sativa L. are produced by floral glandular trichomes. The trichomes consist of secretory disk cells, which produce the abundant lipidic metabolites, and an extracellular storage cavity. The mechanisms of apoplastic cavity formation to accumulate and store metabolites in cannabis glandular trichomes remain wholly unexplored. Here, we identify key wall components and how they change during cannabis trichome development. While glycome and monosaccharide analyses revealed that glandular trichomes have loosely bound xyloglucans and pectic polysaccharides, quantitative immunolabeling with wall-directed antibodies revealed precise spatiotemporal distributions of cell wall epitopes. An epidermal-like identity of early trichome walls matured into specialized wall domains over development. Cavity biogenesis was marked by separation of the subcuticular wall from the underlying surface wall in a homogalacturonan and α-1,5 arabinan epitope-rich zone and was associated with a reduction in fucosylated xyloglucan epitopes. As the cavity filled, a matrix with arabinogalactan and α-1,5 arabinan epitopes enclosed the metabolite droplets. At maturity, the disk cells' apical wall facing the storage cavity accumulated rhamnogalacturonan-I epitopes near the plasma membrane. Together, these data indicate that cannabis glandular trichomes undergo spatiotemporal remodeling at specific wall subdomains to facilitate storage cavity formation and metabolite storage.

Laccases and Peroxidases Co-Localize in Lignified Secondary Cell Walls throughout Stem Development.

Lignin, a critical phenolic polymer in secondary cell walls of plant cells, enables strength in fibers and water transportation in xylem vessel elements. Secreted enzymes, namely laccases (LACs) and peroxidases (PRXs), facilitate lignin polymerization by oxidizing lignin monomers (monolignols). Previous work in Arabidopsis (Arabidopsis thaliana) demonstrated that AtLAC4 and AtPRX64 localized to discrete lignified cell wall domains in fibers, although the spatial distributions of other enzymes in these large gene families are unknown. Here, we show that characteristic sets of putative lignin-associated LACs and PRXs localize to precise regions during stem development, with LACs and PRXs co-occurring in cell wall domains. AtLAC4, AtLAC17, and AtPRX72 localized to the thick secondary cell wall of xylem vessel elements and fibers, whereas AtLAC4, AtPRX64, and AtPRX71 localized to fiber cell corners. Interestingly, AtLAC4 had a transient cell corner localization early in fiber development that disappeared in the mature stem. In contrast with these secondary cell wall localizations, AtLAC10, AtPRX42, AtPRX52, and AtPRX71 were found in nonlignified tissues. Despite ubiquitous PRX occurrence in cell walls, PRX oxidative activity was restricted to lignifying regions during development, which suggested regulated production of apoplastic hydrogen peroxide. Relative amounts of apoplastic reactive oxygen species differed between lignified cell types, which could modulate PRX activity. Together, these results indicate that precise localization of oxidative enzymes and differential distribution of oxidative substrates, such as hydrogen peroxide, provide mechanisms to control spatiotemporal deposition of lignin during development.

Cellulose synthase complexes display distinct dynamic behaviors during xylem transdifferentiation.

In plants, plasma membrane-embedded CELLULOSE SYNTHASE (CESA) enzyme complexes deposit cellulose polymers into the developing cell wall. Cellulose synthesis requires two different sets of CESA complexes that are active during cell expansion and secondary cell wall thickening, respectively. Hence, developing xylem cells, which first undergo cell expansion and subsequently deposit thick secondary walls, need to completely reorganize their CESA complexes from primary wall- to secondary wall-specific CESAs. Using live-cell imaging, we analyzed the principles underlying this remodeling. At the onset of secondary wall synthesis, the primary wall CESAs ceased to be delivered to the plasma membrane and were gradually removed from both the plasma membrane and the Golgi. For a brief transition period, both primary wall- and secondary wall-specific CESAs coexisted in banded domains of the plasma membrane where secondary wall synthesis is concentrated. During this transition, primary and secondary wall CESAs displayed discrete dynamic behaviors and sensitivities to the inhibitor isoxaben. As secondary wall-specific CESAs were delivered and inserted into the plasma membrane, the primary wall CESAs became concentrated in prevacuolar compartments and lytic vacuoles. This adjustment in localization between the two CESAs was accompanied by concurrent decreased primary wall CESA and increased secondary wall CESA protein abundance. Our data reveal distinct and dynamic subcellular trafficking patterns that underpin the remodeling of the cellulose biosynthetic machinery, resulting in the removal and degradation of the primary wall CESA complex with concurrent production and recycling of the secondary wall CESAs.

Organization of Xylan Production in the Golgi During Secondary Cell Wall Biosynthesis.

Secondary cell wall (SCW) production during xylem development requires massive up-regulation of hemicellulose (e.g. glucuronoxylan) biosynthesis in the Golgi. Although mutant studies have revealed much of the xylan biosynthetic machinery, the precise arrangement of these proteins and their products in the Golgi apparatus is largely unknown. We used a fluorescently tagged xylan backbone biosynthetic protein (IRREGULAR XYLEM9; IRX9) as a marker of xylan production in the Golgi of developing protoxylem tracheary elements in Arabidopsis (Arabidopsis thaliana). Both live-cell confocal and transmission electron microscopy (TEM) revealed SCW deposition is accompanied by a significant proliferation of Golgi stacks. Furthermore, although Golgi stacks were randomly distributed, the organization of the cytoplasm ensured their close proximity to developing SCWs. Quantitative immuno-TEM revealed IRX9 is present in a specific subdomain of the Golgi stack and was most abundant in the ring of the inner margins of medial cisternae where fenestrations are abundant. Conversely, the xylan product accumulated in swollen trans cisternal margins and the Trans-Golgi network (TGN). The irx9 mutant lacked this expansion for both the cisternal margins and the TGN, whereas Golgi stack proliferation was unaffected. Golgi in irx9 also displayed dramatic changes in their structure, with increases in cisternal fenestration and tubulation. Our data support a new model where xylan biosynthesis and packaging into secretory vesicles are localized in distinct structural and functional domains of the Golgi. Rather than polysaccharide biosynthesis occurring in the center of the cisternae, IRX9 and the xylan product are arranged in successive concentric rings in Golgi cisternae.

Defining the Diverse Cell Populations Contributing to Lignification in Arabidopsis Stems.

Many land plants evolved tall and sturdy growth habits due to specialized cells with thick lignified cell walls: tracheary elements that function in water transport and fibers that function in structural support. The objective of this study was to define how and when diverse cell populations contribute lignin precursors, monolignols, to secondary cell walls during lignification of the Arabidopsis (Arabidopsis thaliana) inflorescence stem. Previous work demonstrated that, when lignin biosynthesis is suppressed in fiber and tracheary element cells with thickened walls, fibers become lignin-depleted while vascular bundles still lignify, suggesting that nonlignifying neighboring xylem cells are contributing to lignification. In this work, we dissect the contributions of different cell types, specifically xylary parenchyma and fiber cells, to lignification of the stem using cell-type-specific promoters to either knock down an essential monolignol biosynthetic gene or to introduce novel monolignol conjugates. Analysis of either reductions in lignin in knockdown lines, or the addition of novel monolignol conjugates, directly identifies the xylary parenchyma and fiber cell populations that contribute to the stem lignification and the developmental timing at which each contribution is most important.

Distribution, mobility, and anchoring of lignin-related oxidative enzymes in Arabidopsis secondary cell walls.

Lignin is an important phenolic biopolymer that provides strength and rigidity to the secondary cell walls of tracheary elements, sclereids, and fibers in vascular plants. Lignin precursors, called monolignols, are synthesized in the cell and exported to the cell wall where they are polymerized into lignin by oxidative enzymes such as laccases and peroxidases. In Arabidopsis thaliana, a peroxidase (PRX64) and laccase (LAC4) are shown to localize differently within cell wall domains in interfascicular fibers: PRX64 localizes to the middle lamella whereas LAC4 localizes throughout the secondary cell wall layers. Similarly, laccases localized to, and are responsible for, the helical depositions of lignin in protoxylem tracheary elements. In addition, we tested the mobility of laccases in the cell wall using fluorescence recovery after photobleaching. mCHERRY-tagged LAC4 was immobile in secondary cell wall domains, but mobile in the primary cell wall when ectopically expressed. A small secreted red fluorescent protein (sec-mCHERRY) was engineered as a control and was found to be mobile in both the primary and secondary cell walls. Unlike sec-mCHERRY, the tight anchoring of LAC4 to secondary cell wall domains indicated that it cannot be remobilized once secreted, and this anchoring underlies the spatial control of lignification.

A cascade of sequentially expressed sucrose transporters in the seed coat and endosperm provides nutrition for the Arabidopsis embryo.

Developing plant embryos depend on nutrition from maternal tissues via the seed coat and endosperm, but the mechanisms that supply nutrients to plant embryos have remained elusive. Sucrose, the major transport form of carbohydrate in plants, is delivered via the phloem to the maternal seed coat and then secreted from the seed coat to feed the embryo. Here, we show that seed filling in Arabidopsis thaliana requires the three sucrose transporters SWEET11, 12, and 15. SWEET11, 12, and 15 exhibit specific spatiotemporal expression patterns in developing seeds, but only a sweet11;12;15 triple mutant showed severe seed defects, which include retarded embryo development, reduced seed weight, and reduced starch and lipid content, causing a "wrinkled" seed phenotype. In sweet11;12;15 triple mutants, starch accumulated in the seed coat but not the embryo, implicating SWEET-mediated sucrose efflux in the transfer of sugars from seed coat to embryo. This cascade of sequentially expressed SWEETs provides the feeding pathway for the plant embryo, an important feature for yield potential.

The cell biology of secondary cell wall biosynthesis.

Background: Secondary cell walls (SCWs) form the architecture of terrestrial plant biomass. They reinforce tracheary elements and strengthen fibres to permit upright growth and the formation of forest canopies. The cells that synthesize a strong, thick SCW around their protoplast must undergo a dramatic commitment to cellulose, hemicellulose and lignin production. Scope: This review puts SCW biosynthesis in a cellular context, with the aim of integrating molecular biology and biochemistry with plant cell biology. While SCWs are deposited in diverse tissue and cellular contexts including in sclerenchyma (fibres and sclereids), phloem (fibres) and xylem (tracheids, fibres and vessels), the focus of this review reflects the fact that protoxylem tracheary elements have proven to be the most amenable experimental system in which to study the cell biology of SCWs. Conclusions: SCW biosynthesis requires the co-ordination of plasma membrane cellulose synthases, hemicellulose production in the Golgi and lignin polymer deposition in the apoplast. At the plasma membrane where the SCW is deposited under the guidance of cortical microtubules, there is a high density of SCW cellulose synthase complexes producing cellulose microfibrils consisting of 18-24 glucan chains. These microfibrils are extruded into a cell wall matrix rich in SCW-specific hemicelluloses, typically xylan and mannan. The biosynthesis of eudicot SCW glucuronoxylan is taken as an example to illustrate the emerging importance of protein-protein complexes in the Golgi. From the trans-Golgi, trafficking of vesicles carrying hemicelluloses, cellulose synthases and oxidative enzymes is crucial for exocytosis of SCW components at the microtubule-rich cell membrane domains, producing characteristic SCW patterns. The final step of SCW biosynthesis is lignification, with monolignols secreted by the lignifying cell and, in some cases, by neighbouring cells as well. Oxidative enzymes such as laccases and peroxidases, embedded in the polysaccharide cell wall matrix, determine where lignin is deposited.

Multiscale Structural Analysis of Plant ER-PM Contact Sites.

Membrane contact sites are recognized across eukaryotic systems as important nanostructures. Endoplasmic reticulum (ER)-plasma membrane (PM) contact sites (EPCS) are involved in excitation-contraction coupling, signaling, and plant responses to stress. In this report, we perform a multiscale structural analysis of Arabidopsis EPCS that combines live cell imaging, quantitative transmission electron microscopy (TEM) and electron tomography over a developmental gradient. To place EPCS in the context of the entire cortical ER, we examined green fluorescent protein (GFP)-HDEL in living cells over a developmental gradient, then Synaptotagmin1 (SYT1)-GFP was used as a specific marker of EPCS. In all tissues examined, young, rapidly elongating cells showed lamellar cortical ER and higher density of SYT1-GFP puncta, while in mature cells the cortical ER network was tubular, highly dynamic and had fewer SYT1-labeled puncta. The higher density of EPCS in young cells was verified by quantitative TEM of cryo-fixed tissues. For all cell types, the size of each EPCS had a consistent range in length along the PM from 50 to 300 nm, with microtubules and ribosomes excluded from the EPCS. The structural characterization of EPCS in different plant tissues, and the correlation of EPCS densities over developmental gradients illustrate how ER-PM communication evolves in response to cellular expansion.

ABCG26-mediated polyketide trafficking and hydroxycinnamoyl spermidines contribute to pollen wall exine formation in Arabidopsis.

Pollen grains are encased by a multilayered, multifunctional wall. The sporopollenin and pollen coat constituents of the outer pollen wall (exine) are contributed by surrounding sporophytic tapetal cells. Because the biosynthesis and development of the exine occurs in the innermost cell layers of the anther, direct observations of this process are difficult. The objective of this study was to investigate the transport and assembly of exine components from tapetal cells to microspores in the intact anthers of Arabidopsis thaliana. Intrinsically fluorescent components of developing tapetum and microspores were imaged in intact, live anthers using two-photon microscopy. Mutants of ABCG26, which encodes an ATP binding cassette transporter required for exine formation, accumulated large fluorescent vacuoles in tapetal cells, with corresponding loss of fluorescence on microspores. These vacuolar inclusions were not observed in tapetal cells of double mutants of abcg26 and genes encoding the proposed sporopollenin polyketide biosynthetic metabolon (ACYL COENZYME A SYNTHETASE5, POLYKETIDE SYNTHASE A [PKSA], PKSB, and TETRAKETIDE α-PYRONE REDUCTASE1), providing a genetic link between transport by ABCG26 and polyketide biosynthesis. Genetic analysis also showed that hydroxycinnamoyl spermidines, known components of the pollen coat, were exported from tapeta prior to programmed cell death in the absence of polyketides, raising the possibility that they are incorporated into the exine prior to pollen coat deposition. We propose a model where ABCG26-exported polyketides traffic from tapetal cells to form the sporopollenin backbone, in coordination with the trafficking of additional constituents, prior to tapetum programmed cell death.

Free-Flow Electrophoresis of Plasma Membrane Vesicles Enriched by Two-Phase Partitioning Enhances the Quality of the Proteome from Arabidopsis Seedlings.

The plant plasma membrane is the interface between the cell and its environment undertaking a range of important functions related to transport, signaling, cell wall biosynthesis, and secretion. Multiple proteomic studies have attempted to capture the diversity of proteins in the plasma membrane using biochemical fractionation techniques. In this study, two-phase partitioning was combined with free-flow electrophoresis to produce a population of highly purified plasma membrane vesicles that were subsequently characterized by tandem mass spectroscopy. This combined high-quality plasma membrane isolation technique produced a reproducible proteomic library of over 1000 proteins with an extended dynamic range including plasma membrane-associated proteins. The approach enabled the detection of a number of putative plasma membrane proteins not previously identified by other studies, including peripheral membrane proteins. Utilizing multiple data sources, we developed a PM-confidence score to provide a value indicating association to the plasma membrane. This study highlights over 700 proteins that, while seemingly abundant at the plasma membrane, are mostly unstudied. To validate this data set, we selected 14 candidates and transiently localized 13 to the plasma membrane using a fluorescent tag. Given the importance of the plasma membrane, this data set provides a valuable tool to further investigate important proteins. The mass spectrometry data are available via ProteomeXchange, identifier PXD001795.

Fine structure of the Arabidopsis stem cuticle: effects of fixation and changes over development.

MAIN CONCLUSION: The Arabidopsis cuticle, as observed by electron microscopy, consists primarily of the cutin/cutan matrix. The cuticle possesses a complex substructure, which is correlated with the presence of intracuticular waxes. The plant cuticle is composed of an insoluble polyester, cutin, and organic solvent soluble cuticular waxes, which are embedded within and coat the surface of the cutin matrix. How these components are arranged in the cuticle is not well understood. The Arabidopsis cuticle is commonly understood as 'amorphous,' lacking in ultrastructural features, and is often observed as a thin (~80-100 nm) electron-dense layer on the surface of the cell wall. To examine this cuticle in more detail, we examined cuticles from both rapidly elongating and mature sections of the stem and compared the preservation of the cuticles using conventional chemical fixation methods and high-pressure freezing/freeze-substitution (HPF/FS). We found that HPF/FS preparation revealed a complex cuticle substructure, which was more evident in older stems. We also found that the cuticle increases in thickness with development, indicating an accretion of polymeric material, likely in the form of the non-hydrolyzable polymer, cutan. When wax was extracted by chloroform immersion prior to sample preparation, the contribution of waxes to cuticle morphology was revealed. Overall, the electron-dense cuticle layer was still visible but there was loss of the cuticle substructure. Furthermore, the cuticle of cer6, a wax-deficient mutant, also lacked this substructure, suggesting that these fine striations were dependent on the presence of cuticular waxes. Our findings show that HPF/FS preparation can better preserve plant cuticles, but also provide new insights into the fine structure of the Arabidopsis cuticle.

Histology and cell wall biochemistry of stone cells in the physical defence of conifers against insects.

Conifers possess an array of physical and chemical defences against stem-boring insects. Stone cells provide a physical defence associated with resistance against bark beetles and weevils. In Sitka spruce (Picea sitchensis), abundance of stone cells in the cortex of apical shoots is positively correlated with resistance to white pine weevil (Pissodes strobi). We identified histological, biochemical and molecular differences in the stone cell phenotype of weevil resistant (R) or susceptible (S) Sitka spruce genotypes. R trees displayed significantly higher quantities of cortical stone cells near the apical shoot node, the primary site for weevil feeding. Lignin, cellulose, xylan and mannan were the most abundant components of stone cell secondary walls, respectively. Lignin composition of stone cells isolated from R trees contained a higher percentage of G-lignin compared with S trees. Transcript profiling revealed higher transcript abundance in the R genotype of coumarate 3-hydroxylase, a key monolignol biosynthetic gene. Developing stone cells in current year apical shoots incorporated fluorescent-tagged monolignol into the secondary cell wall, while mature stone cells of previous year apical shoots did not. Stone cell development is an ephemeral process, and fortification of shoot tips in R trees is an effective strategy against insect feeding.

Golgi- and trans-Golgi network-mediated vesicle trafficking is required for wax secretion from epidermal cells.

Lipid secretion from epidermal cells to the plant surface is essential to create the protective plant cuticle. Cuticular waxes are unusual secretory products, consisting of a variety of highly hydrophobic compounds including saturated very-long-chain alkanes, ketones, and alcohols. These compounds are synthesized in the endoplasmic reticulum (ER) but must be trafficked to the plasma membrane for export by ATP-binding cassette transporters. To test the hypothesis that wax components are trafficked via the endomembrane system and packaged in Golgi-derived secretory vesicles, Arabidopsis (Arabidopsis thaliana) stem wax secretion was assayed in a series of vesicle-trafficking mutants, including gnom like1-1 (gnl1-1), transport particle protein subunit120-4, and echidna (ech). Wax secretion was dependent upon GNL1 and ECH. Independent of secretion phenotypes, mutants with altered ER morphology also had decreased wax biosynthesis phenotypes, implying that the biosynthetic capacity of the ER is closely related to its structure. These results provide genetic evidence that wax export requires GNL1- and ECH-dependent endomembrane vesicle trafficking to deliver cargo to plasma membrane-localized ATP-binding cassette transporters.