Towards Robot-Assisted Echocardiographic Monitoring in Catheterization Laboratories : Usability-Centered Manipulator for Transesophageal Echocardiography.

This paper proposes a robotic Transesophageal Echocardiography (TOE) system concept for Catheterization Laboratories. Cardiovascular disease causes one third of all global mortality. TOE is utilized to assess cardiovascular structures and monitor cardiac function during diagnostic procedures and catheter-based structural interventions. However, the operation of TOE underlies various conditions that may cause a negative impact on performance, the health of the cardiac sonographer and patient safety. These factors have been conflated and evince the potential of robot-assisted TOE. Hence, a careful integration of clinical experience and Systems Engineering methods was used to develop a concept and physical model for TOE manipulation. The motion of different actuators of the fabricated motorized system has been tested. It is concluded that the developed medical system, counteracting conflated disadvantages, represents a progressive approach for cardiac healthcare.

A multi-chamber soft robot for transesophageal echocardiography: continuous kinematic matching control of soft medical robots.

OBJECTIVES: This research investigates designing a continuum soft robot and proposing a kinematic matching control to enable the robot to perform a specified medical task, which in this paper is the transesophageal echocardiography (TEE). METHODS: A multi-chamber soft robot was designed and fabricated based on the molding of separate layers. The method of transformation matrices was used to develop the kinematic models, and a control method using Jacobian matrices was proposed to manipulate the robot. RESULTS: A prototype was made based on a multi-chamber multi-layer design. The system contains three segments that can be actuated independently to mimic the active bending part of the respective probe. Kinematic models were developed. Negative pressure (vacuum) was used as actuation input. An open-loop controller inspired by a redundancy resolution technique was proposed to make the soft robot tip follow the desired path, i.e. the path of the rigid ultrasound probe. CONCLUSIONS: It is concluded that the soft solution can perform the required task as the reachable points of the TEE tip cover the proposed robot workspace and the proposed control can be used for maneuvering in arbitrary trajectories.

Chorda Dorsalis System as a Paragon for Soft Medical Robots to Design Echocardiography Probes with a New SOM-Based Steering Control.

Continuum robots play the role of end effectors in various surgical robots and endoscopic devices. While soft continuum robots (SCRs) have proven advantages such as safety and compliance, more research and development are required to enhance their capability for specific medical scenarios. This research aims at designing a soft robot, considering the concepts of geometric and kinematic similarities. The chosen application is a semi-invasive medical application known as transesophageal echocardiography (TEE). The feasibility of fabrication of a soft endoscopic device derived from the Chorda dorsalis paragon was shown empirically by producing a three-segment pneumatic SCR. The main novelties include bioinspired design, modeling, and a navigation control strategy presented as a novel algorithm to maintain a kinematic similarity between the soft robot and the rigid counterpart. The kinematic model was derived based on the method of transformation matrices, and an algorithm based on a self-organizing map (SOM) network was developed and applied to realize kinematic similarity. The simulation results indicate that the control method forces the soft robot tip to follow the path of the rigid probe within the prescribed distance error (5 mm). The solution provides a soft robot that can surrogate and succeed the traditional rigid counterpart owing to size, workspace, and kinematics.