RESUMO
The ability of an anion to serve as electron-accepting Lewis acid in a noncovalent bond is assessed via DFT calculations. NH3 is taken as the common base, and is paired with a host of ACln- anions, with central atom A = Ca, Sr, Mg, Te, Sb, Hg, Zn, Ag, Ga, Ti, Sn, I, and B. Each anion reacts through its σ or π-hole although the electrostatic potential of this hole is quite negative in most cases. Despite the contact between this negative hole and the negative region of the approaching nucleophile, the electrostatic component of the interaction energy of each bond is highly favorable, and accounts for more than half of the total attractive energy. The double negative charge of dianions precludes a stable complex with NH3.
RESUMO
Adducts between OsO4 and Lewis bases exert a role in important oxidation processes such as epoxidation and dihydroxylation. It has been shown that the attractive interaction driving the formation of these adducts is a σ-hole bond involving the metal as the electrophilic species; the term Osme Bond (OmB) was proposed for designating it. Here some new adducts between OsO4 and various bases have been characterized through single crystal x-ray diffraction (XRD) and computational studies (density functional theory, DFT), confirming the existence of a robust correlation between σ-hole interaction energy and deformation of the tetrahedral geometry of OsO4. Also, some adducts formed by RuO4 with nucleophiles were investigated computationally.
RESUMO
As a flat trigonal species, the CR3 + carbenium ion contains a pair of deep π-holes above and below its molecular plane. In the case of CH3 + a first base will form a covalent bond with the central C, making the combined species tetrahedral. Approach of a second base to the opposite side results in a longer but rather strong noncovalent tetrel bond (TB). While CMe3 + can also form a similar asymmetric complex with a pair of bases, it also has the capacity to form a pair of nearly equivalent TBs, such that the resulting symmetric trigonal bipyramid configuration is only slightly higher in energy. When the three substituents on the central C are phenyl rings, the symmetric configuration with two TBs predominates. These tetrel bonds are quite strong, reaching up to 20â kcal/mol. Adding OPH2 or OCH substituents to the phenyl rings permits the formation of intramolecular Câ â O TBs to the central C, very similar in many respects to the case where these TBs are intermolecular.
RESUMO
The propensity of the π-electron system lying above a polycyclic aromatic system to engage in a halogen bond is examined by DFT calculations. Prototype Lewis acid CF3I is placed above the planes of benzene, naphthalene, anthracene, phenanthrene, naphthacene, chrysene, triphenyl, pyrene, and coronene. The I atom positions itself some 3.3-3.4â Å above the polycyclic plane, and the associated interaction energy is about 4â kcal/mol. This quantity is a little smaller for benzene, but is roughly equal for the larger polycyclics. The energy only oscillates a little as the Lewis acid slides across the face of the polycyclic, preferring regions of higher π-electron density over minima of the electrostatic potential. The binding is dominated by dispersion which contributes half of the total interaction energy.
RESUMO
A systematic theoretical study was conducted on the triel bonds (TrBs) within the TrX3···Be(CO)3 complexes (Tr = B, Al, Ga, In, Tl; X = H, F, Cl, Br, I). The interaction energies of these systems range between 4 and 38 kcal/mol. The TrB weakens as X becomes more electronegative in the B and Al systems, while the opposite pattern of stronger bonds is observed in the In and Tl analogues. The dominant component of the TrB is polarization energy, which arises from charge transfer from Be(CO)3 to TrX3. The source of the density is a confluence of CO π-bonding orbitals at the Be center that resembles a Be lone pair, and which makes the molecular electrostatic potential above the Be somewhat negative. This π-lump is paired with the highly positive π-hole above the Tr, and a large amount of charge is transferred to the empty pz orbital of Tr. These factors, when considered in conjunction with large AIM measures, confer on this TrB a certain degree of covalency.
RESUMO
The strength and nature of the bonding between tetrel (T) atoms in R2Tâ¯TR2 is examined by quantum calculations. T atoms cover the range of Group 14 atoms from C to Pb, and substituents R include Cl, F, and NH2. Systems vary from electrically neutral to both positive and negative overall charged radicals. There is a steady weakening progression in T-T bond strength as the tetrel atom grows larger, transitioning smoothly from a strong covalent to a much weaker noncovalent bond for the larger T atoms. The latter have some of the characteristics of a ditetrel bond, but there are also significant deviations from a classic bond of this type. The T2Cl4- anions are more strongly bonded than the corresponding cations, which are in turn stronger than the neutrals.
RESUMO
The five-membered heteroaromatic thiazole molecule contains a number of electron-rich regions that could attract an electrophile, namely the N and S lone pairs that lie in the molecular plane, and π-system areas above the plane. The possibility of each of these sites engaging in a tetrel bond (TB) with CF4 and SiF4, as well as geometries that encompass a CHâ¯F H-bond, was explored via DFT calculations. There are a number of minima that occur in the pairing of thiazole with CF4 that are very close in energy, but these complexes are weakly bound by less than 2 kcal mol-1 and the presence of a true TB is questionable. The inclusion of zero-point vibrational energies alters the energetic ordering, which is further modified when entropic effects are added. The preferred geometry would thus be sensitive to the temperature of an experiment. Replacement of CF4 by SiF4 leaves intact most of the configurations, and their tight energetic clustering, the ordering of which is again altered as the temperature rises. But there is one exception in that by far the most tightly bound complex involves a strong Siâ¯N TB between SiF4 and the lone pair of the thiazole N, with an interaction energy of 30 kcal mol-1. Even accounting for its high deformation energy and entropic considerations, this structure remains as clearly the most stable at any temperature.
RESUMO
The term "wolfium bond" has been recently introduced to describe the noncovalent attraction between an atom of group 6 and a nucleophile via a σ-hole binding site. Crystal structures commonly contain a motif wherein two MX4Y units are arranged in close proximity, where M represents either Mo or W, and X and Y refer to halogen and chalcogen atoms respectively. DFT calculations were thus applied to a wide range of homodimers of these molecules so as to assess their preferred arrangements, and to characterize the types of bonding that are present in each in a systematic manner. The most stable Dual-X configuration is symmetric and contains a pair of equivalent Mâ¯X bonds. The interaction energies range from -8 to -29 kcal mol-1, and are largest for X = F, Y = O, and M = W. The X electron donor is replaced by Y, and the two wolfium bonds are reduced to one, in the less stable Mono-Y structure, with interaction energies between -2 and -10 kcal mol-1. There is some question as to whether the weaker bonds of this type constitute true wolfium bonds.
RESUMO
It is usually assumed that the maximal noncovalent bond strength is achieved by full geometry optimization of the geometry of the dyad. Density functional theory calculations show this not to be the case. A number of systems are considered that include osme, tetrel, pnictogen, and chalcogen bonds, involving both σ- and π-holes, as well as hypervalency. By suitable adjustment of the bond angles within the Lewis acid, the base can be drawn closer than in the optimized structure, with an accompanying substantial strengthening of the noncovalent bond, by more than 10 kcal/mol in some cases. The energetic cost of this deformation from the optimized geometry can be surprisingly small in comparison to the gain in the interaction energy. Taking the opposite approach of first pushing the two subunits closer to one another and then permitting internal geometries to adjust to the shortened distance produces only minimal bond strengthening.
RESUMO
The effects of monosubstitution on the aromaticity of benzene are assessed using a number of different quantitative schemes. The ability of the mobile π-electrons to respond to an external magnetic field is evaluated using several variants of the NICS scheme which calculate the shielding of points along the axis perpendicular to the molecule. Another class of measures is related to the drive toward the uniformity of C-C bond lengths and strengths. Several energetic quantities are devised to approximate an aromatic stabilization energy and the tendency of the molecule to maintain planarity. There is a lack of consistency in that the various measures of aromaticity lead to differing conclusions as to the effects of substituents on the aromaticity of the ring.
RESUMO
A chalcogen atom Y contains two separate σ-holes when in a R1 YR2 molecular bonding pattern. Quantum chemical calculations consider competition between these two σ-holes to engage in a chalcogen bond (ChB) with a NH3 base. R groups considered include F, Br, I, and tert-butyl (tBu). Also examined is the situation where the Y lies within a chalcogenazole ring, where its neighbors are C and N. Both electron-withdrawing substituents R1 and R2 act cooperatively to deepen the two σ-holes, but the deeper of the two holes consistently lies opposite to the more electron-withdrawing group, and is also favored to form a stronger ChB. The formation of two simultaneous ChBs in a triad requires the Y atom to act as double electron acceptor, and so anti-cooperativity weakens each bond relative to the simple dyad. This effect is such that some of the shallower σ-holes are unable to form a ChB at all when a base occupies the other site.
RESUMO
The lone pair of the N atom is a common electron donor in noncovalent bonds. Quantum calculations examine how various aspects of the base on which the N is located affect the strength and other properties of complexes formed with Lewis acids FH, FBr, F2 Se, and F3 As that respectively encompass hydrogen, halogen, chalcogen, and pnicogen bonds. In most cases the halogen bond is the strongest, followed in order by chalcogen, hydrogen, and pnicogen. The noncovalent bond strength increases in the sp
RESUMO
While a good deal of information has accumulated concerning the manner in which an intramolecular noncovalent bond can affect the relative energies of various conformers, less is known about how such bonds might affect the dynamics of interconversion between them. A series of molecules are constructed in which symmetrically equivalent conformers containing a noncovalent bond can be interconverted by a bond rotation, the energy barrier to which is computed by quantum chemical methods. The rotation of a CF3 group attached to a phenyl ring is speeded up if a Se··F chalcogen bond can be formed with a SeH or SeF group placed in an ortho position, a bond that is present in and stabilizes the rotational transition state. The analogous SnF3 group can, on the other hand, engage in a Sn··Se tetrel bond in its global minimum. The energetic cost of breakage of this bond is not fully compensated by the appearance of a Se··F chalcogen bond in the rotational transition state. Other systems were designed by placing two phenyl rings on opposite ends of an octahedrally disposed SeF4 group. A high barrier inhibits their rotation with bulky Br atoms in ortho positions, but this barrier is lowered if Br is replaced by groups that can engage in either chalcogen (SeH or SeF) or pnicogen (AsH2) bonds with the F atoms in the rotational transition state. The barrier reduction is closely related to the strength of these noncovalent bonds.
RESUMO
The three Z-X covalent bonds of a ZX3 unit (Z = P, As, Sb, Bi) are normally arranged in a pyramidal structure. Quantum chemical calculations show that pnicogen bonds (ZBs) to the central Z are weakened if ZX3 is flattened, as in the opening of an umbrella. The partial closing of the umbrella has the opposite effect of substantially strengthening these ZBs, even amounting to a 2- or 3-fold magnification in certain cases. The strongest such bonds, wherein Sb and Bi are in a strained configuration within a ZO3CH model system, have interaction energies of 20 kcal/mol with an NH3 base. Most of these systems, whether flattened or more pyramidal, are capable of engaging in three ZBs simultaneously, despite a certain amount of negative cooperativity.
RESUMO
It is usually expected that formation of a halogen bond (XB) requires that a region of positive electrostatic potential associated with a σ or π-hole on the Lewis acid will interact with the negative potential of the base, either a lone pair or π-bond region. Quantum calculations of model systems suggest this not to be necessary. The placement of electron-withdrawing substituents on the base can reverse the sign of the potential in its lone pair or π-bond region to positive, and this base can nonetheless engage in a XB with the positive σ-hole of a Lewis acid. The reverse scenario is also possible in certain circumstances, as a negatively charged σ-hole can form a XB with the negative lone pair region of a base. Despite these classical Coulombic repulsions, the overall electrostatic interaction is attractive in these XBs, albeit only weakly so. The strengths of these bonds are surprisingly insensitive to changes in the partner molecule. For example, even a wide range in the depth of the σ-hole of the approaching acid yields only a minimal change in the strength of the XB to a base with a positive potential.
RESUMO
DFT calculations evaluate the strength of σ-hole bonds formed by ZH3 and ZMe3 (Z = N, P, As, Sb) acting as electron donor. Bond types considered include H-bond, halogen, chalcogen, pnicogen, and tetrel bond to perfluorinated Lewis acids FH, FBr, F2Se F3As, F4Ge, respectively, as well as their monofluorinated analogues. All of the Z atoms can engage in bonds of at least moderate strength, varying from 3 to more than 40 kcal mol-1. In most cases, N forms the strongest bonds, but the falloff from P to Sb is quite mild. However, this pattern is not characteristic of all cases, as for example in the halogen bonds, where the heavier Z atoms are comparable to, or even stronger than N. Most of the bonds are strengthened by replacing the three H atoms of ZH3 by methyl groups, better simulating the situation that would be generally encountered. Structural and NMR shielding data ought to facilitate the identification of these bonds within crystals or in solution.
RESUMO
The dimers and trimers formed by imidazole (IM) and F2TO (T = C, Si, Ge) are studied by ab initio calculations. IM can engage in either a NHâ¯O H-bond with F2TO or a Tâ¯N tetrel bond (TB) with the π-hole above the T atom. The latter is a true noncovalent TB for T = C but is a much shorter and stronger covalent bond with F2SiO or F2GeO. When a second IM is added, the cooperativity emerging from its H-bond with the first IM makes it a stronger nucleophile, leading to two minima with F2CO. The first structure contains a long noncovalent Câ¯O TB and there is a much shorter covalent bond in the other, with a small energy barrier separating them. The same sort of double minimum occurs when the two IM units are situated parallel to one another in a stacked geometry.
RESUMO
The halogen bond formed by a series of Lewis acids TF3X (T = C, Si, Ge, Sn, Pb; X = Cl, Br, I) with NH3 is studied by quantum chemical calculations. The interaction energy is closely mimicked by the depth of the σ-hole on the X atom as well as the full electrostatic energy. There is a first trend by which the hole is deepened if the T atom to which X is attached becomes more electron-withdrawing: C > Si > Ge > Sn > Pb. On the other hand, larger more polarizable T atoms are better able to transmit the electron-withdrawing power of the F substituents. The combination of these two opposing factors leaves PbF3X forming the strongest XBs, followed by CF3X, with SiF3X engaging in the weakest bonds. The charge transfer from the NH3 lone pair into the σ*(TX) antibonding orbital tends to elongate the covalent TX bond, and this force is largest for the heavier X and T atoms. On the other hand, the contraction of this bond deepens the σ-hole at the X atom, which would enhance both the electrostatic component and the full interaction energy. This bond-shortening effect is greatest for the lighter X atoms. The combination of these two opposing forces leaves the T-X bond contracting for X = Cl and Br, but lengthening for I.
RESUMO
Quantum calculations provide a systematic assessment of the ability of Group 10 transition metals M = Pd and Pt to act as an electron donor within the context of pnicogen, chalcogen, and halogen bonds. These M atoms are coordinated in a square planar geometry, attached to two N atoms of a modified phenanthrene unit, as well as two ligand atoms Cl, Br, or I. As the Lewis acid, a series of AFn molecules were chosen, which could form a pnicogen bond (A = P, As, Sb), chalcogen bond (A = S, Se, Te) or halogen bond (A = Cl, Br, I) with M. These noncovalent bonds are fairly strong, varying between 6 and 20 kcal mol-1, with the occupied dz2 orbital of M acting as the origin of charge transferred to the acid. Pt forms somewhat stronger bonds than Pd, and the bond strength rises with the size of the A atom of the acid. Within the context of smaller A atoms, the bond strength rises in the order pnicogen < chalcogen < halogen, but this distinction vanishes for the fifth-row A atoms. The nature of the ligand atoms on M has little bearing on the bond strength. Based on the Harmonic Oscillator Model of Aromaticity (HOMA) index, the ZB, YB and XB bonds were shown to have only a subtle effect on the ring electronic structures.
RESUMO
The properties of the bond between a N-ligand and a Lewis acid containing a σ-hole are studied by quantum chemical methods. Interactions considered include pnicogen bonds involving SbX5, PX5, and PX3, where X represents any of the halogen atoms F, Cl, Br, or I. Also studied are the tetrel bonds of PbX4 and SiX4, as well as the chalcogen bond involving TeOX4. Both NH3 and NCH are applied as two possible bases of differing potency. Some of the bonds are very strong with interaction energies easily exceeding 25 kcal/mol and with AIM bond critical point densities much higher than 0.04 au, suggesting their classification as coordinate covalent bonds. The pentavalent SbX5 and PX5 fall into this category when combined with NH3, as does TeOX4. Although the tetrel bonds involving PbX4 are only slightly weaker, they are probably better viewed as a strong noncovalent bond on the cusp of covalency. Changing the internal bonding of hypervalent SbX5 to the more conventional SbX3 weakens the interaction to a classical noncovalent pnicogen bond. Reducing the base nucleophilicity from NH3 to NCH weakens the bonds so that they are clearly noncovalent.