Reductive Dimerization of CO by a Na/Mg(I) Diamide.

Sodium reduction of [{SiNDipp}Mg] [{SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3] provides the Mg(I) species, [{SiNDipp}MgNa]2, in which the long Mg-Mg bond (>3.2 Å) is augmented by persistent Na-aryl interactions. Computational assessment indicates that this molecule is best considered to comprise a contiguous tetrametallic core, a viewpoint borne out by its reaction with CO, which results in ethynediolate formation mediated by the dissimilar metal centers.

Seven-Membered Cyclic Potassium Diamidoalumanyls.

The seven-membered cyclic potassium alumanyl species, [{SiNMes }AlK]2 [{SiNMes }={CH2 SiMe2 N(Mes)}2 ; Mes=2,4,6-Me3 C6 H2 ], which adopts a dimeric structure supported by flanking K-aryl interactions, has been isolated either by direct reduction of the iodide precursor, [{SiNMes }AlI], or in a stepwise manner via the intermediate dialumane, [{SiNMes }Al]2 . Although the intermediate dialumane has not been observed by reduction of a Dipp-substituted analogue (Dipp=2,6-i-Pr2 C6 H3 ), partial oxidation of the potassium alumanyl species, [{SiNDipp }AlK]2 , where {SiNDipp }={CH2 SiMe2 N(Dipp)}2 , provided the extremely encumbered dialumane [{SiNDipp }Al]2 . [{SiNDipp }AlK]2 reacts with toluene by reductive activation of a methyl C(sp3 )-H bond to provide the benzyl hydridoaluminate, [{SiNDipp }AlH(CH2 Ph)]K, and as a nucleophile with BPh3 and RN=C=NR (R=i-Pr, Cy) to yield the respective Al-B- and Al-C-bonded potassium aluminaborate and alumina-amidinate products. The dimeric structure of [{SiNDipp }AlK]2 can be disrupted by partial or complete sequestration of potassium. Equimolar reactions with 18-crown-6 result in the corresponding monomeric potassium alumanyl, [{SiNDipp }Al-K(18-cr-6)], which provides a rare example of a direct Al-K contact. In contrast, complete encapsulation of the potassium cation of [{SiNDipp }AlK]2 , either by an excess of 18-cr-6 or 2,2,2-cryptand, allows the respective isolation of bright orange charge-separated species comprising the 'free' [{SiNDipp }Al]- alumanyl anion. Density functional theory (DFT) calculations performed on this moiety indicate HOMO-LUMO energy gaps in the of order 200-250 kJ mol-1 .

Ambiphilic Al-Cu Bonding.

Copper-alumanyl complexes, [LCu-Al(SiNDipp )], where L=carbene=NHCiPr (N,N'-diisopropyl-4,5-dimethyl-2-ylidene) and Me2 CAAC (1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene) and featuring unsupported Al-Cu bonds, have been prepared. Divergent reactivity observed with carbodiimides and CO2 implies an ambiphilicity in the Cu-Al interaction that is dependent on the identity of the carbene co-ligand.

A Stable Calcium Alumanyl.

A seven-membered N,N'-heterocyclic potassium alumanyl nucleophile is introduced and utilised in the metathetical synthesis of Mg-Al and Ca-Al bonded derivatives. Both species have been characterised by experimental and theoretical means, allowing a rationalisation of the greater reactivity of the heavier group 2 species implied by an initial assay of their reactivity.

Distibanes and Distibenes from Reduction of Sb(NONR )Cl by using MgI Reagents.

The bis(amidodimethyl)disiloxane antimony chlorides Sb(NONR )Cl (NONR =[O(SiMe2 NR)2 ]2- ; R=tBu, Ph, 2,6-Me2 C6 H3 =Dmp, 2,6-iPr2 C6 H3 =Dipp, 2,6-(CHPh2 )2 -4-tBuC6 H2 =tBu-Bhp) are reduced to SbII and SbI species by using MgI reagents, [Mg(BDIR' )]2 (BDI=[HC{C(Me)NR'}2 ]- ; R'=2,4,6-Me3 C6 H2 =Mes, Dipp). Stoichiometric reactions with Sb(NONR )Cl (R=tBu, Ph) form dimeric SbII stibanes [Sb(NONR )]2 , shown crystallographically to contain Sb-Sb single bonds. The analogous distibane with R=Dmp substituents has an exceptionally long Sb-Sb interaction and exhibits spectroscopic and reactivity properties consistent with radical character in solution. When R=Dipp, reductions with MgI reagents directly give distibenes [Sb(µ-NONDipp )Mg(BDIR' )(THF)n ]2 (R'=Mes, n=1; R'=Dipp, n=0). Crystallographic analysis shows a trans-substitution of the Sb=Sb double bond, with bridging NONDipp -ligands between the SbI and MgII centres. An attempt to access the NONPh -analogue using the same protocol afforded the polystibide cluster Sb8 [µ4 ,η2:2:2:2 -Mg(BDIMes )]4 , which co-crystallized with the ligand transfer product, [Mg(BDIMes )]2 (µ-NONPh ).

Reduction vs. Addition: The Reaction of an Aluminyl Anion with 1,3,5,7-Cyclooctatetraene.

The potassium aluminyl complex K[Al(NONAr )] (NON=NONAr =[O(SiMe2 NAr)2 ]2- , Ar=2,6-iPr2 C6 H3 ) reacts with 1,3,5,7-cyclooctatetraene (COT) to give K[Al(NONAr )(COT)]. The COT-ligand is present in the asymmetric unit as a planar µ2 -η2 :η8 -bridge between Al and K, with additional K⋅⋅⋅π-aryl interactions to neighboring molecules that generate a helical chain. DFT calculations indicate significant aromatic character, consistent with reduction to [COT]2- . Addition of 18-crown-6 causes a rearrangement of the C8 -carbocycle to form the isomeric 9-aluminabicyclo[4.2.1]nona-2,4,7-triene anion.

Indyllithium and the Indyl Anion [InL]- : Heavy Analogues of N-Heterocyclic Carbenes.

Reduction of the indate complex In(NONAr )(µ-Cl)2 Li(OEt2 )2 (NONAr =[O(SiMe2 NAr)2 ]2- ; Ar=2,6-iPr2 C6 H3 ) with sodium generates the InII diindane species [In(NONAr )]2 . Further reduction with a mixture of potassium and [2.2.2]crypt affords the InI N-heterocyclic indyl anion [In(NONAr )]- , which crystallizes with a non-contacted [K([2.2.2]crypt)]+ cation. The indyl anion can also be isolated as the indyllithium compound In(NONAr )(Li{THF}3 ), which contains an In-Li bond. Density functional theory calculations show that the HOMO of the indyl anion is a metal-centred lone pair, and preliminary reactivity studies confirm its nucleophilic behaviour.

Bismuth(III) Complex of the [S4]•- Radical Anion: Dimer Formation via Pancake Bonds.

Reaction of bismuth(II) compounds with sulfur gives mixtures of [Bi(NONR)]2(µ2-Sn) (NONR = [O(SiMe2NR)2]2-). Examples for n = 1 and 3 have been crystallographically verified for R = 2,6-iPr2C6H3 (Dipp) and R = tBu, and the pentasulfide (n = 5) for R = Dipp. The corresponding product from reaction with the new Bi(II) radical Bi(NONAr‡)• (Ar‡ = C6H2(CHPh2)2-tBu-2,6,4) exists as the dimer [Bi(NONAr‡)(S4)]2, with π*(SOMO)-π*(SOMO) interactions linking the sulfur chains through trans-antarafacial pancake bonds.

(15)N NMR Spectroscopy, X-ray and Neutron Diffraction, Quantum-Chemical Calculations, and UV/vis-Spectrophotometric Titrations as Complementary Techniques for the Analysis of Pyridine-Supported Bicyclic Guanidine Superbases.

Pyridine substituted with one and two bicyclic guanidine groups has been studied as a potential source of superbases. 2-{hpp}C5H4N (I) and 2,6-{hpp}2C5H3N (II) (hppH = 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine) were protonated using [HNEt3][BPh4] to afford [I-H][BPh4] (1a), [II-H][BPh4] (2), and [II-H2][BPh4]2 (3). Solution-state (1)H and (15)N NMR spectroscopy shows a symmetrical cation in 2, indicating a facile proton-exchange process in solution. Solid-state (15)N NMR data differentiates between the two groups, indicating a mixed guanidine/guanidinium. X-ray diffraction data are consistent with protonation at the imine nitrogen, confirmed for 1a by single-crystal neutron diffraction. The crystal structure of 1a shows association of two [I-H](+) cations within a cage of [BPh4](-) anions. Computational analysis performed in the gas phase and in MeCN solution shows that the free energy barrier to transfer a proton between imino centers in [II-H](+) is 1 order of magnitude lower in MeCN than in the gas phase. The results provide evidence that linking hpp groups with the pyridyl group stabilizes the protonation center, thereby increasing the intrinsic basicity in the gas phase, while the bulk prevents efficient cation solvation, resulting in diminished pKa(MeCN) values. Spectrophotometrically measured pKa values are in excellent agreement with calculated values and confirm that I and II are superbases in solution.

Bi-P Bond Homolysis as a Route to Reduced Bismuth Compounds and Reversible Activation of P4.

Bismuth diphenylphosphanides Bi(NONR )(PPh2 ) (NONR =[O(SiMe2 NR)2 ], R=tBu, 2,6-iPr2 C6 H3 , Aryl) undergo facile decomposition via single-electron processes to form reduced Bi and P species. The corresponding derivatives Bi(NONR )(PCy2 ) are stable. Reaction of the isolated BiII radical . Bi(NONAr ) with white phosphorus (P4 ) proceeds with the reversible and selective activation of a single P-P bond to afford the bimetallic µ,η1:1 -bicyclo[1.1.0]tetraphosphabutane compound.

Isolation and Characterization of a Bismuth(II) Radical.

More than 80 years after Paneth's report of dimethyl bismuth, the first monomeric Bi(II) radical that is stable in the solid state has been isolated and characterized. Reduction of the diamidobismuth(III) chloride Bi(NON(Ar))Cl (NON(Ar)=[O(SiMe2NAr)2](2-); Ar=2,6-iPr2C6H3) with magnesium affords the Bi(II) radical ˙Bi(NON(Ar)). X-ray crystallographic measurements are consistent with a two-coordinate bismuth in the +2 oxidation state with no short intermolecular contacts, and solid-state SQUID magnetic measurements indicate a paramagnetic compound with a single unpaired electron. EPR and density functional calculations show a metal-centered radical with >90% spin density in a p-type orbital on bismuth.

Low-coordinate bismuth cations.

Chloride abstraction from the diamido-bismuth compound Bi(Me2Si{NAr}2)Cl (1, Ar = 2,6-i-Pr2C6H3) using MCl3 (M = Al, Ga) is a facile route to cationic species. Stoichiometric reactions afford the tetrachlorometallate salts [Bi(Me2Si{NAr}2)][MCl4] (2a, M = Al; 3a, M = Ga), whereas reaction with 0.5 equiv of the group 13 reagent gives the µ-chlorido bridged cations [{Bi(Me2Si{NAr}2)}2(µ-Cl)][MCl4] (2b, M = Al; 3b, M = Ga). The crystal structure of 2a shows a formally two-coordinate bismuth cation, with a Bi···Cl contact to the [AlCl4](-) anion, whereas the structure of 3b shows a total of three Bi···Cl contacts to [GaCl4](-). Both species associate as {1:1}2 dimers in the solid state through additional Bi···Cl interactions. Attempted preparation of cationic complexes using either NaBR4 (R = Ph, Et) or [HNEt3][BPh4] were unsuccessful. Instead of forming the borate salts, the neutral compounds Bi(Me2Si{NAr}2)R (4, R = Et; 5, R = Ph) were isolated as a result of aryl/alkyl transfer from boron to bismuth.

Variable Ca-Caryl Hapticity and its Consequences in Arylcalcium Dimers.

The dimeric ß-diketiminato calcium hydride, [(Dipp BDI)CaH]2 (Dipp BDI = HC{(Me)CN-2,6-i-Pr2 C6 H3 }2 ), reacts with ortho-, meta- or para-tolyl mercuric compounds to afford hydridoarylcalcium compounds, [(Dipp BDI)2 Ca2 (µ-H)(µ-o-,m-,p-tolyl)], in which dimer propagation occurs either via µ2 -η1 -η1 or µ2 -η1 -η6 bridging between the calcium centers. In each case, the orientation and hapticity of the aryl units is dependent upon the position of the methyl substituent. While wholly organometallic meta- and para-tolyl dimers, [(Dipp BDI)Ca(m-tolyl)]2 and [(Dipp BDI)Ca(p-tolyl)]2 , can be prepared and are stable, the ortho-tolyl isomer is prone to isomerization to a calcium benzyl analog. Computational analysis of this latter process with density functional theory (DFT) highlights an unusual mechanism invoking the generation of an intermediate dicalcium species in which the group 2 centers are bridged by a toluene dianion formed by the formal attachment of the original hydride anion to the initially generated ortho-tolyl substituent. Use of a more sterically encumbered aryl substituent, {3,5-t-Bu2 C6 H3 }, facilitates the selective formation of [(Dipp BDI)Ca(µ-H)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)], which can be converted into the unsymmetrically-substituted σ-aryl calcium complexes, [(Dipp BDI)Ca(µ-Ph)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] and [(Dipp BDI)Ca(µ-p-tolyl)(µ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] by reaction with the appropriate mercuric diaryl. Conversion of [(Dipp BDI)Ca(H)(Ph)Ca(Dipp BDI)] to afford [{{(Dipp BDI)Ca}2 (µ2 -Cl)}2 (C6 H5 -C6 H5 )], comprising a biphenyl dianion, is also reported. Although this latter transformation is serendipitous, AIM analysis highlights that, in a related manner to the ortho-tolyl to benzyl isomerization, the requisite C-C coupling may be facilitated in an "across dimer" fashion by the experimentally-observed polyhapto engagement of the aryl substituents with each calcium.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes.

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Synthesis and reactivity of a terminal aluminium-imide bond.

The reaction of the potassium aluminyl K[Al(NONDipp)] (NONDipp = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) with an organic azide generates the aluminium imide complex, K[Al(NONDipp)(NMes)] (Mes = mesityl = 2,4,6-Me3C6H2). DFT calculations indicate the Al-Nimide interaction is polarized but has appreciable multiple-bond character. This is demonstrated experimentally by the reaction with carbon dioxide, giving a rare example of a main group carbamate dianion via a [2+2] cycloaddition reaction.

A Stable Calcium Alumanyl.

A seven-membered N,N'-heterocyclic potassium alumanyl nucleophile is introduced and utilised in the metathetical synthesis of Mg-Al and Ca-Al bonded derivatives. Both species have been characterised by experimental and theoretical means, allowing a rationalisation of the greater reactivity of the heavier group 2 species implied by an initial assay of their reactivity.

Intramolecular Metal⋠⋠⋠π-Arene Interactions in Neutral and Cationic Main Group Compounds.

The role of intramolecular metal⋅⋅⋅π-arene interactions has been investigated in the solid-state structures of a series of main group compounds supported by the bulky amide ligands, [N(tBu Ar≠ )(SiR3 )]- (tBu Ar≠ =2,6-(CHPh2 )2 -4-tBuC6 H2 , R=Me, Ph). The lithium and potassium amide salts showed different patterns of solvation and demonstrated that the SiPh3 substituent is able to be involved in stabilizing the electrophilic metal. These group 1 metal compounds served as ligand transfer reagents to access a series of bismuth(III) halides. Chloride extraction from Bi(N{tBu Ar≠ }{SiPh3 })Cl2 using AlCl3 afforded the 1:1 salt [Bi(N{tBu Ar≠ }{SiPh3 })Cl][AlCl4 ]. This was accompanied by a significant rearrangement of the stabilizing π-arene contacts in the solid-state. Attempted preparation of the corresponding tetraphenylborate salt resulted in phenyl-transfer and generation of the neutral Bi(N{tBu Ar≠ }{SiPh3 })(Ph)Cl.

A study of di(amino)stibines with terminal Sb(iii) hydrogen-ligands by X-ray- and neutron-diffraction.

The bis(amidodimethyl)disiloxane ligands [O{SiMe2NR}2]2- (R = 2,6-Me2C6H3 (Ar') and 2,6-iPr2C6H3 (Ar), abbreviated [NONR]2-, are a stable support for Sb(iii) complexes of general formula Sb(NONR)X (X = Cl, H). The compounds are monomeric in the solid-state, with bidentate N,N'-coordination of the [NONR]2- and terminal chloride/hydrogen-ligands. Sb(NONAr')H was analyzed by single-crystal neutron diffraction, giving the first accurate parameters for the Sb-H bond to an antimony(iii) centre.

Catalytic bond forming reactions promoted by amidinate, guanidinate and phosphaguanidinate compounds of magnesium.

The synthesis and catalytic properties of a series of magnesium compounds consisting of monoanionic, N,N'-chelating ligands (N∩N = amidinates, guanidinates, phosphaguanidinates) is reported. The compounds were synthesized by (i) insertion of a carbodiimide into an existing Mg-C or Mg-N bond, or (ii) protonolysis of an organomagnesium compound by a neutral pre-ligand. Structural analyses of mono- or bis-(chelate) compounds with general formula Mg(N∩N)X(L)n and Mg(N∩N)2(L)n (X = halide, aryloxide, amide; L = Et2O, THF; n = 0, 1 or 2) have been performed and the influence that the ligand substituent patterns have on the solid-state structures has been probed. Selected examples of the compounds were tested as (pre)catalysts for the polymerization of lactide, the dimerization of aldehydes and the hydroacetylenation of carbodiimides.