In vitro selection with artificial expanded genetic information systems.

Artificially expanded genetic information systems (AEGISs) are unnatural forms of DNA that increase the number of independently replicating nucleotide building blocks. To do this, AEGIS pairs are joined by different arrangements of hydrogen bond donor and acceptor groups, all while retaining their Watson-Crick geometries. We report here a unique case where AEGIS DNA has been used to execute a systematic evolution of ligands by exponential enrichment (SELEX) experiment. This AEGIS-SELEX was designed to create AEGIS oligonucleotides that bind to a line of breast cancer cells. AEGIS-SELEX delivered an AEGIS aptamer (ZAP-2012) built from six different kinds of nucleotides (the standard G, A, C, and T, and the AEGIS nonstandard P and Z nucleotides, the last having a nitro functionality not found in standard DNA). ZAP-2012 has a dissociation constant of 30 nM against these cells. The affinity is diminished or lost when Z or P (or both) is replaced by standard nucleotides and compares well with affinities of standard GACT aptamers selected against cell lines using standard SELEX. The success of AEGIS-SELEX relies on various innovations, including (i) the ability to synthesize GACTZP libraries, (ii) polymerases that PCR amplify GACTZP DNA with little loss of the AEGIS nonstandard nucleotides, and (iii) technologies to deep sequence GACTZP DNA survivors. These results take the next step toward expanding the power and utility of SELEX and offer an AEGIS-SELEX that could possibly generate receptors, ligands, and catalysts having sequence diversities nearer to that displayed by proteins.

Evolution of functional six-nucleotide DNA.

Axiomatically, the density of information stored in DNA, with just four nucleotides (GACT), is higher than in a binary code, but less than it might be if synthetic biologists succeed in adding independently replicating nucleotides to genetic systems. Such addition could also add functional groups not found in natural DNA, but useful for molecular performance. Here, we consider two new nucleotides (Z and P, 6-amino-5-nitro-3-(1'-ß-D-2'-deoxyribo-furanosyl)-2(1H)-pyridone and 2-amino-8-(1'-ß-D-2'-deoxyribofuranosyl)-imidazo[1,2-a]-1,3,5-triazin-4(8H)-one). These are designed to pair via complete Watson-Crick geometry. These were added to a library of oligonucleotides used in a laboratory in vitro evolution (LIVE) experiment; the GACTZP library was challenged to deliver molecules that bind selectively to liver cancer cells, but not to untransformed liver cells. Unlike in classical in vitro selection, low levels of mutation allow this system to evolve to create binding molecules not necessarily present in the original library. Over a dozen binding species were recovered. The best had Z and/or P in their sequences. Several had multiple, nearby, and adjacent Zs and Ps. Only the weaker binders contained no Z or P at all. This suggests that this system explored much of the sequence space available to this genetic system and that GACTZP libraries are richer reservoirs of functionality than standard libraries.

Identification of cell membrane protein stress-induced phosphoprotein 1 as a potential ovarian cancer biomarker using aptamers selected by cell systematic evolution of ligands by exponential enrichment.

In this paper, we describe the elucidation of the target of an aptamer against ovarian cancer previously obtained by cell-SELEX (SELEX = systematic evolution of ligands by exponential enrichment). The target's identity, stress-induced phosphoprotein 1 (STIP1), was determined by mass spectrometry and validated by flow cytometry, using siRNA silencing and protein blotting. Initial oncologic studies show that the aptamer inhibits cell invasion, indicating that STIP1, which is currently under investigation as a potential biomarker for ovarian cancer, plays a critical role in this process. These results serve as an excellent example of how protein target identification of aptamers obtained by cell-SELEX can serve as a means to identify promising biomarker candidates and can promote the development of aptamers as a new drug class to block important oncological processes.

Building a multifunctional aptamer-based DNA nanoassembly for targeted cancer therapy.

The ability to self-assemble one-dimensional DNA building blocks into two- and three-dimensional nanostructures via DNA/RNA nanotechnology has led to broad applications in bioimaging, basic biological mechanism studies, disease diagnosis, and drug delivery. However, the cellular uptake of most nucleic acid nanostructures is dependent on passive delivery or the enhanced permeability and retention effect, which may not be suitable for certain types of cancers, especially for treatment in vivo. To meet this need, we have constructed a multifunctional aptamer-based DNA nanoassembly (AptNA) for targeted cancer therapy. In particular, we first designed various Y-shaped functional DNA domains through predesigned base pair hybridization, including targeting aptamers, intercalated anticancer drugs, and therapeutic antisense oligonucleotides. Then these functional DNA domains were linked to an X-shaped DNA core connector, termed a building unit, through the complementary sequences in the arms of functional domains and connector. Finally, hundreds (~100-200) of these basic building units with 5'-modification of acrydite groups were further photo-cross-linked into a multifunctional and programmable aptamer-based nanoassembly structure able to take advantage of facile modular design and assembly, high programmability, excellent biostability and biocompatibility, as well as selective recognition and transportation. With these properties, AptNAs were demonstrated to have specific cytotoxic effect against leukemia cells. Moreover, the incorporation of therapeutic antisense oligonucleotides resulted in the inhibition of P-gp expression (a drug efflux pump to increase excretion of anticancer drugs) as well as a decrease in drug resistance. Therefore, these multifunctional and programmable aptamer-based DNA nanoassemblies show promise as candidates for targeted drug delivery and cancer therapy.

Cell-based selection provides novel molecular probes for cancer stem cells.

Cancer stem cells (CSC) represent a malignant subpopulation of cells in hierarchically organized tumors. They constitute a subpopulation of malignant cells within a tumor mass and possess the ability to self-renew giving rise to heterogeneous tumor cell populations with a complex set of differentiated tumor cells. CSC may be the cause of metastasis and therapeutic refractory disease. Because few markers exist to identify and isolate pure CSC, we used cell-based Systematic Evolution of Ligands by EXponential enrichment (cell-SELEX) to create DNA aptamers that can identify novel molecular targets on the surfaces of live CSC. Out of 22 putative DNA sequences, 3 bound to ~90% and 5 bound to ~15% of DU145 prostate cancer cells. The 15% of cells that were positive for the second panel of aptamers expressed high levels of E-cadherin and CD44, had high aldehyde dehydrogenase 1 activity, grew as spheroids under nonadherent culture conditions, and initiated tumors in immune-compromised mice. The discovery of the molecular targets of these aptamers could reveal novel CSC biomarkers.

DNA aptamer-micelle as an efficient detection/delivery vehicle toward cancer cells.

We report the design of a self-assembled aptamer-micelle nanostructure that achieves selective and strong binding of otherwise low-affinity aptamers at physiological conditions. Specific recognition ability is directly built into the nanostructures. The attachment of a lipid tail onto the end of nucleic acid aptamers provides these unique nanostructures with an internalization pathway. Other merits include: extremely low off rate once bound with target cells, rapid recognition ability with enhanced sensitivity, low critical micelle concentration values, and dual-drug delivery pathways. To prove the potential detection/delivery application of this aptamer-micelle in biological living systems, we mimicked a tumor site in the blood stream by immobilizing tumor cells onto the surface of a flow channel device. Flushing the aptamer-micelles through the channel demonstrated their selective recognition ability under flow circulation in human whole-blood sample. The aptamer-micelles show great dynamic specificity in flow channel systems that mimic drug delivery in the blood system. Therefore, our DNA aptamer-micelle assembly has shown high potential for cancer cell recognition and for in vivo drug delivery applications.

Engineering polymeric aptamers for selective cytotoxicity.

Chemotherapy strategies thus far reported can result in both side effects and drug resistance. To address both of these issues at the cellular level, we report a molecular engineering strategy, which employs polymeric aptamers to induce selective cytotoxicity inside target cells. The polymeric aptamers, composed of both multiple cell-based aptamers and a high ratio of dye-labeled short DNA, exploit the target recognition capability of the aptamer, enhanced cell internalization via multivalent effects, and cellular disruption by the polymeric conjugate. Importantly, the polymer backbone built into the conjugate is cytotoxic only inside cells. As a result, selective cytotoxicity is achieved equally in both normal cancer cells and drug-resistant cells. Control assays have confirmed the nontoxicity of the aptamer itself, but they have also shown that the physical properties of the polymer backbone contribute to target cell cytotoxicity. Therefore, our approach may shed new light on drug design and drug delivery.

Detection of lysozyme magnetic relaxation switches based on aptamer-functionalized superparamagnetic nanoparticles.

Magnetic relaxation switch (MRSw) detection is based on aggregate formation or dissociation when magnetic nanoparticles (MNPs) bind to target molecules. In the aggregated state, the dephasing rate of nearby proton spins is higher than in the dispersed state, resulting in a decrease in the spin-spin relaxation time, T(2). In this work, an MRSw-based nanosensor for lysozyme (Lys) protein detection was achieved using iron oxide nanoparticles conjugated with either Lys aptamer or linker DNA, which can hybridize with the extended part of the aptamer to form clusters. Upon the addition of Lys, the aptamers bind with their targets, leading to disassembly of clusters and an increase in T(2). A detection limit in the nanomolar range was achieved for Lys detection in both buffer and human serum. The determination of Lys level in different types of cancer cell lysates was also performed to demonstrate detection in real clinical samples.

Using azobenzene incorporated DNA aptamers to probe molecular binding interactions.

The rational design of DNA/RNA aptamers for use as molecular probes depends on a clear understanding of their structural elements in relation to target-aptamer binding interactions. We present a simple method to create aptamer probes that can occupy two different structural states. Then, based on the difference in binding affinity between these states, target-aptamer binding interactions can be elucidated. The basis of our two-state system comes from the incorporation of azobenzene within the DNA strand. Azobenzene can be used to photoregulate the melting of DNA-duplex structures. When incorporated into aptamers, the light-regulated conformational change of azobenzene can be used to analyze how aptamer secondary structure is involved in target binding. Azobenzene-modified aptamers showed no change in target selectivity, but showed differences in binding affinity as a function of the number, position, and conformation of azobenzene modifications. Aptamer probes that can change binding affinity on demand may have future uses in targeted drug delivery and photodynamic therapy.

Nucleic acid aptamers for biosensors and bio-analytical applications.

Oligonucleotides were once considered only functional as molecules for the storage of genetic information. However, the discovery of RNAzymes, and later, DNAzymes, unravelled the innate potential of oligonucleotides in many other biological applications. In the last two decades, these applications have been further expanded through the introduction of Systematic Evolution of Ligands by EXponential enrichment (SELEX) which has generated, by repeated rounds of in vitro selection, a type of molecular probe termed aptamers. Aptamers are oligonucleic acid (or peptide) molecules that can bind to various molecular targets and are viewed as complements to antibodies. Aptamers have found applications in many areas, such as bio-technology, medicine, pharmacology, microbiology, and analytical chemistry, including chromatographic separation and biosensors. In this review, we focus on the use of aptamers in the development of biosensors. Coupled with their ability to bind a variety of targets, the robust nature of oligonucleotides, in terms of synthesis, storage, and wide range of temperature stability and chemical manipulation, makes them highly suitable for biosensor design and engineering. Among the many design strategies, we discuss three general paradigms that have appeared most frequently in the literature: structure-switching, enzyme-based, and aptazyme-based designs.

A Synthetic Aptamer-Drug Adduct for Targeted Liver Cancer Therapy.

AS1411 (previously known as AGRO100) is a 26 nucleotide guanine-rich DNA aptamer which forms a guanine quadruplex structure. AS1411 has shown promising utility as a treatment for cancers in Phase I and Phase II clinical trials without causing major side-effects. AS1411 inhibits tumor cell growth by binding to nucleolin which is aberrantly expressed on the cell membrane of many tumors. In this study, we utilized a simple technique to conjugate a widely-used chemotherapeutic agent, doxorubicin (Dox), to AS1411 to form a synthetic Drug-DNA Adduct (DDA), termed as AS1411-Dox. We demonstrate the utility of AS1411-Dox in the treatment of hepatocellular carcinoma (HCC) by evaluating the targeted delivery of Dox to Huh7 cells in vitro and in a murine xenograft model of HCC.

Selection of an aptamer antidote to the anticoagulant drug bivalirudin.

Adverse drug reactions, including severe patient bleeding, may occur following the administration of anticoagulant drugs. Bivalirudin is a synthetic anticoagulant drug sometimes employed as a substitute for heparin, a commonly used anticoagulant that can cause a condition called heparin-induced thrombocytopenia (HIT). Although bivalrudin has the advantage of not causing HIT, a major concern is lack of an antidote for this drug. In contrast, medical professionals can quickly reverse the effects of heparin using protamine. This report details the selection of an aptamer to bivalirudin that functions as an antidote in buffer. This was accomplished by immobilizing the drug on a monolithic column to partition binding sequences from nonbinding sequences using a low-pressure chromatography system and salt gradient elution. The elution profile of binding sequences was compared to that of a blank column (no drug), and fractions with a chromatographic difference were analyzed via real-time PCR (polymerase chain reaction) and used for further selection. Sequences were identified by 454 sequencing and demonstrated low micromolar dissociation constants through fluorescence anisotropy after only two rounds of selection. One aptamer, JPB5, displayed a dose-dependent reduction of the clotting time in buffer, with a 20 µM aptamer achieving a nearly complete antidote effect. This work is expected to result in a superior safety profile for bivalirudin, resulting in enhanced patient care.

Aptamer-conjugated nanorods for targeted photothermal therapy of prostate cancer stem cells.

Prostate cancer results in about 30,000 deaths annually in the United States, making it the second leading cause of cancer mortality in men in the Western world. Therefore, it is of great significance to capture and kill prostate cancer cells. It is well known that cancer stem cells are responsible for the maintenance and metastasis of tumors. This concept offers the possibility of developing a selective therapeutic approach in which cancer stem cells are directly targeted and killed. In this work, aptamers selected against DU145 prostate cancer cells (aptamer CSC1) and their subpopulation of cancer stem cells (aptamer CSC13) were linked to the surfaces of gold nanorods (AuNRs), and the resulting conjugates were successfully used to target and kill both cancer cells and cancer stem cells by near-infrared (NIR) laser irradiation. Even though cancer stem cells represent only a small population among all cancer cells, the entire cell viability was very low after laser irradiation, suggesting that tumorigenesis could be successfully controlled by this aptamer-based method, thus paving the way for early diagnosis and targeted therapy.

Pattern recognition of cancer cells using aptamer-conjugated magnetic nanoparticles.

Biocompatible magnetic nanosensors based on reversible self-assembly of dispersed magnetic nanoparticles into stable nanoassemblies have been used as effective magnetic relaxation switches (MRSw) for the detection of molecular interactions. We report, for the first time, the design of MRSw based on aptamer-conjugated magnetic nanoparticles (ACMNPs). The ACMNPs capitalize on the ability of aptamers to specifically bind target cancer cells, as well as the large surface area of MNPs to accommodate multiple aptamer binding events. The ACMNPs can detect as few as 10 cancer cells in 250 µL of sample. The ACMNPs' specificity and sensitivity are also demonstrated by detection in cell mixtures and complex biological media, including fetal bovine serum, human plasma, and whole blood. Furthermore, by using an array of ACMNPs, various cell types can be differentiated through pattern recognition, thus creating a cellular molecular profile that will allow clinicians to accurately identify cancer cells at the molecular and single-cell level.

A novel aptamer developed for breast cancer cell internalization.

Breast cancer affects one in eight women in the United States, with a mortality rate that is second only to lung cancer. Although chemotherapy is widely used in breast cancer treatment, its side effects remain a challenge. One way to address this problem is through drug delivery by the internalization of cell-type-specific probes. Although nucleic acid aptamers are excellent probes for molecular recognition, only a few studies have demonstrated that aptamers can be internalized into living cells. Therefore, herein we report the development of a cancer-cell-specific DNA aptamer probe, KMF2-1a. By using the cell-SELEX method, this aptamer was selected against breast cancer cell line MCF-10AT1. Our results show that KMF2-1a is internalized efficiently and specifically to the endosome of target breast cancer cells. These results indicate that KMF2-1a is a promising agent for cell-type-specific intracellular delivery with both diagnostic and therapeutic implications.

Selection of aptamers specific for adipose tissue.

BACKGROUND: Obesity has reached epidemic proportions, affecting more than one tenth of the world's population. As such, adipose tissue is being increasingly recognized as an important therapeutic target for obesity and related metabolic disorders. While many potential targets of adipose tissue have been established and drugs developed, very few of those drugs specifically target adipose tissue without affecting other tissue. This results from a limited knowledge of both cell-surface markers and physicochemical traits specific to adipocytes that might otherwise be exploited by circulating drugs. METHODOLOGY/PRINCIPAL FINDINGS: Here we report the use of cell-SELEX technology to select two aptamers that can specifically recognize mature adipocytes: adipo-1 and adipo-8. Adipo-8 shows high affinity for differentiated, mature 3T3-L1 adipocytes with a K(d) value of 17.8±5.1 nM. The binding was sustained upon incubation at 37°C and insulin stimulation, but was lost upon trypsin treatment. The binding ability was also verified on frozen tissue slides with low background fluorescence and isolated adipocytes. CONCLUSIONS/SIGNIFICANCE: Aptamer adipo-8 selected from a random library appears to bind to mature differentiated adipocytes specifically. This aptamer holds great promise as a molecular recognition tool for adipocyte biomarker discovery or for targeted delivery of molecules to adipocytes.

Generation of lung adenocarcinoma DNA aptamers for cancer studies.

Lung cancer is the most lethal malignancy in the world, and each year thousands of people die from this disease. Early detection has proven to increase the 5-year survival for this cancer in general, independent of the origination site in the lung. To address this challenge, we have used cell-based SELEX (Systematic Evolution of Ligands by Exponential Enrichment) to select a panel of aptamers capable of distinguishing lung adenocarcinoma cells from normal lung epithelial cells. These aptamers bind at physiological and formalin-fixed conditions and display affinity for their targets with apparent K(d')s in the nanomolar range. Our findings suggest that the selected aptamers have the potential to be used in clinical settings, as well as to improve classification of nonsurgical specimens, another current challenge in lung cancer.

Self-assembled aptamer-based drug carriers for bispecific cytotoxicity to cancer cells.

Monovalent aptamers can deliver drugs to target cells by specific recognition. However, different cancer subtypes are distinguished by heterogeneous biomarkers and one single aptamer is unable to recognize all clinical samples from different patients with even the same type of cancers. To address heterogeneity among cancer subtypes for targeted drug delivery, as a model, we developed a drug carrier with a broader recognition range of cancer subtypes. This carrier, sgc8c-sgd5a (SD), was self-assembled from two modified monovalent aptamers. It showed bispecific recognition abilities to target cells in cell mixtures; thus broadening the recognition capabilities of its parent aptamers. The self-assembly of SD simultaneously formed multiple drug loading sites for the anticancer drug doxorubicin (Dox). The Dox-loaded SD (SD-Dox) also showed bispecific abilities for target cell binding and drug delivery. Most importantly, SD-Dox induced bispecific cytotoxicity in target cells in cell mixtures. Therefore, by broadening the otherwise limited recognition capabilities of monovalent aptamers, bispecific aptamer-based drug carriers would facilitate aptamer applications for clinically heterogeneous cancer subtypes that respond to the same cancer therapy.

Aptamer-drug conjugation for targeted tumor cell therapy.

Aptamers developed for applications in cancer therapy can improve the efficacy of drug treatment and enhance molecular imaging. Aptamers for these purposes are generated from SELEX (Systematic Evolution of Ligands by EXponential enrichment), more precisely cell-based SELEX, a process described in detail in this chapter. Experimental applications are also provided for aptamer-based drugs.

Capturing cancer cells using aptamer-immobilized square capillary channels.

We report a simple square capillary-based cell affinity chromatography device that utilizes a coating of aptamers for selective capture of target cancer cells from a flowing suspension. The device consists of a square capillary with an inner diameter of roughly five cell diameters, connected via Teflon tubing to a syringe. Aptamers are immobilized on the inner surface of the capillary through biotin-avidin chemistry, the extent of which can be controlled by adjusting the aptamer concentration. Introduction of different cell types into separate devices, as well as mixtures of target and non-target cells, demonstrated that aptamer-target cells can be captured in significantly higher concentrations compared to non-target cells. Once optimized, 91.1 ± 3.5% capture efficiency of target leukemia cells was reported, as well as 97.2 ± 2.8% and 83.6 ± 5.8% for two different colon cancer cell lines. In addition, cells captured in the device were imaged, and the square capillary exhibited better optical properties than standard cylindrical capillaries, leading to the detection of leukemia cells in blood samples. Compared to current microfluidic cell affinity devices, this capture device requires no complicated design or fabrication steps. By providing a simple means of detecting and imaging cancer cells in the blood, this work has potential to directly assist clinicians in determining disease prognosis and measuring therapeutic response.