Accumulation and human health risk assessment of nitrate in vegetables irrigated with different irrigation water sources- transfer evaluation of nitrate from soil to vegetables.

The present study aimed to investigate the rate of accumulation, human health risk assessment, and nitrate-related transfer factor in vegetables irrigated with different sources, including treated wastewater effluent (TWE) of Kermanshah wastewater treatment plant, Gharasoo river water (RW) of Kermanshah, and well water with chemical fertilizer (WWF). For this purpose, three different types of vegetables, including basil, coriander, and radish, was cultivated, and each of them was irrigated by the three irrigation sources mentioned above. Finally, the amount of nitrate in different sources of irrigation, soil (before growing vegetables and after harvesting vegetables), and the mentioned vegetables was measured. Based on the study results, it can be concluded that the water of the Gharasoo River (RW), compared to the other two irrigation sources, causes more nitrate accumulation in the soil and vegetables grown in it. The highest transmission factor was related to basil vegetables irrigated with WWF. The results showed that the average daily intake of nitrate through the consumption of vegetables grown in Kermanshah with any irrigation water is less than the allowable amount, so the consumption of such vegetables is not dangerous to consumers' health. Therefore, it is suggested that the best irrigation source for vegetable cultivation in Kermanshah is TWE, provided that all of its physical, chemical and microbial parameters meet the standards for reuse in agriculture irrigation. Thus, the use of treated wastewater reduces the need for farmers to use chemical and organic fertilizers and cost-effectiveness, high frequency, and high availability.

Trace determination of triazine herbicides in fruit and vegetables using novel hydrophobic deep eutectic solvent-based dispersive liquid-liquid microextraction followed by high-performance liquid chromatography-ultraviolet.

In the present research, a novel hydrophobic deep eutectic solvent-based dispersive liquid-liquid microextraction technique was established and combined with high-performance liquid chromatography-ultraviolet for the determination of triazine herbicides in fruit and vegetable samples. A deep eutectic solvent was synthesized using l-menthol as a hydrogen bond acceptor and ethylene glycol as a hydrogen bond donor and used as a green extractant. The characterization of deep eutectic solvent was investigated by Fourier-transform infrared, nuclear magnetic resonance, and thermogravimetric analysis. Under the optimum conditions, relative standard deviation values for intra-day and inter-day of the method based on seven replicate measurements of 50.0 µg/kg of triazines were in the range of 2.8%-5.5% and 3.7%-7.2%, respectively. The calibration graphs were linear in the range of 3.0-500 µg/kg and the limits of detection were in the range of 1.0-2.0 µg/kg. The relative recoveries of different fruit and vegetable samples that have been spiked with two levels of target compounds were 91.5%-109.8%. The method has good linearity, sensitivity, accuracy, and precision. It is also environmentally friendly and was successfully used to determine the concentrations of triazines in fruit and vegetable samples.

Advantages and disadvantages of different pre-cooking and cooking methods in removal of essential and toxic metals from various rice types- human health risk assessment in Tehran households, Iran.

The aim of present study was to evaluate the effects of different pre-cooking and cooking methods on the concentration of toxic (As, Cd and Pb) and essential (Fe, Cu, Co and Zn) metals in widely consumed rice types by Tehran households, Iran. In this regard, a total of 90 samples were obtained from Iranian, Pakistani and Indian rice brands (30 samples from each brand), and were examined in order to determine the concentration of toxic metals including As, Cd, Pb, Fe, Zn, Co and Cu using ICP-OES. Among these rice brands, the most contaminated one was selected in order to evaluate the effects of washing and soaking processes in different time points (1, 5 and 12 h), as well as different cooking methods (Rinsing and Kateh) in reducing the concentration of subjected metals. Nine samples were analyzed for each process, which were 54 samples in total. Our results show that the preparation and cooking methods applied for all rice brands (except for Indian rice) could effectively reduce the non-carcinogenic risk associated with these metals to the acceptable level; however, this is not true about the carcinogenic risk associated with arsenic. Finally, according to our findings it can be concluded that all cooking methods can lead to considerable removal of rice toxic metals (this is partially true about all available rice brands in Iran), however, a large amount of essential metals were also eliminated by these methods. Moreover, after cooking of different rice types in Iran, this food has still carcinogenic risk associated with arsenic.

A systematic literature review for some toxic metals in widely consumed rice types (domestic and imported) in Iran: Human health risk assessment, uncertainty and sensitivity analysis.

In present study we aimed to investigate the literature in the form of systematic review to determinate the concentrations of some toxic metals (arsenic, lead, and cadmium) in widely consumed rice brands in Iran and their related health risks. International and Iranian national databases were searched carefully with appropriate keywords for papers on toxic metal contamination of rice from Agust-2000 to Agust-2018. Initially, 560 articles were found, of which only the 50 papers fit the inclusion criteria and were selected for further analysis. The Monte Carlo Simulation was applied to generate missing data (mean, standard deviation, data distribution and sample size) of toxic metal concentration in some papers. Then, statistical analysis, health risk assessment, and uncertainty and sensitivity analysis were performed. The results indicated that approximately 88% of rice consumed in Iran (including Iranian, Pakistani and Indian rice) do not meet the national standard and WHO/FAO guideline requirements and their related health risks are unacceptable. The risks of arsenic and lead in Indian rice and cadmium in Iranian rice were considerably higher than others. In conclusion, according to our findings, In conclusion, it is necessary to prevent toxic metals contamination of rice by modifying cultivation patterns and, also, prevent low-quality rice brands to be imported.

Persistent sample circulation microextraction combined with graphite furnace atomic absorption spectroscopy for trace determination of heavy metals in fish species marketed in Kermanshah, Iran, and human health risk assessment.

BACKGROUND: Persistent sample circulation microextraction (PSCME) combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed as a high pre-concentration technique for the determination of heavy metals in fish species. In this method, a few microliters of organic solvent (40.0 µL carbon tetrachloride) was transferred to the bottom of a conical sample cup. Then 10.0 mL of aqueous solution was transformed to fine droplets while passing through the organic solvent. At this stage, metal-ligand hydrophobic complex was extracted into the organic solvent. After extraction, 20 µL of extraction solvent was injected into the graphite tube using an auto-sampler. RESULTS: Under optimal conditions, enrichment factors and enhancement factor were in the range of 180-240 and 155-214, respectively. The calibration curves were linear in the range of 0.03-200 µg kg-1 and the limits of detection (LODs) were in the range of 0.01-0.05 µg kg-1 . Repeatability (intra-day) and reproducibility (inter-day) for 0.50 µg L-1 Hg and 0.10 µg L-1 Cd and Pb were in the range of 3.1-4.2% (n = 7) and 4.3-6.1% (n = 7), respectively. CONCLUSION: Potential human health risk assessment was conducted by calculating estimated weekly intake (EWI) of the metals from eating fish and comparison of these values with provisional tolerable weekly intake (PTWI) values. EWI data for the studied metals through fish consumption were lower than the PTWI values. © 2017 Society of Chemical Industry.

Optimization of a methodology for the simultaneous determination of deltamethrin, permethrin and malathion in stored wheat samples using dispersive liquid-liquid microextraction with solidification of floating organic drop and HPLC-UV.

The purpose of this study was to investigate common pesticides in stored wheat at Kermanshah province's silos in Iran. A simple, inexpensive, reliable and environmentally friendly method based on dispersive liquid-liquid microextraction with solidification of floating organic drop was developed. The analytical characteristics of the method were determined. Also, various parameters such as the materials of the silos, types of ownerships of the silos, geographic orientation of silo locations and climatic conditions of silo locations on pesticide residues in studied wheat samples were investigated. Among all the studied parameters, the climatic conditions of silo locations showed the highest influence on pesticide residues in wheat samples. Generally, 61.2% of the samples had pesticide levels below the method detection limits and 38.8% of the total samples had at least one of the understudied pesticides. Also, 13.9% of the samples had deltamethrin residues, 16.7% of the samples had permethrin, 22.2% of the samples had malathion, 11.1% of the samples had both permethrin and malathion and 2.8% of the samples had both deltamethrin and malathion. The results revealed that the residues of deltamethrin and malathion were lower than the standard level announced by European Union regulation and only three samples contained permethrin higher than Europe standard level.

Density assessment and mapping of microorganisms around a biocomposting plant in Sanandaj, Iran.

Exposure to microorganisms can cause various diseases or exacerbate the excitatory responses, inflammation, dry cough and shortness of breath, reduced lung function, chronic obstructive pulmonary disease, and allergic response or allergic immune. The aim of the present study was to investigate the density of microorganisms around the air of processing facilities of a biocomposting plant. Each experiment was carried out according to ASTM E884-82 (2001) method. The samples were collected from inhaled air in four locations of the plant, which had a high traffic of workers and employees, including screen, conveyor belt, aerated compost pile, and static compost pile. The sampling was repeated five times for each location selected. The wind speed and its direction were measured using an anemometer. Temperature and humidity were also recorded at the time of sampling. The multistage impactor used for sampling was equipped with a solidified medium (agar) and a pump (with a flow rate of 28.3 l/m) for passing air through the media. It was found that the mean density of total bacteria was >1.7 × 103 cfu/m3 in the study area. Moreover, the mean densities of fungi, intestinal bacteria (Klebsiella), and Staphylococcus aureus were 5.9 × 103, 3.3 × 103, and 4.1 × 103 cfu/m3, respectively. In conclusion, according to the findings, the density of bacteria and fungi per cubic meter of air in the samples collected around the processing facilities of the biocomposting plant in Sanandaj City was higher than the microbial standard for inhaled air.

Which is better for optimizing the biosorption process of lead - central composite design or the Taguchi technique?

The aim of this study is to evaluate central composite design (CCD) and the Taguchi technique in the adsorption process. Contact time, initial concentration, and pH were selected as the variables, and the removal efficiency of Pb was chosen for the designated response. In addition, face-centered CCD and the L9 orthogonal array were used for the experimental design. The result indicated that, at optimum conditions, the removal efficiency of Pb was 80%. However, the value of R2 was greater than 0.95 for both the CCD and Taguchi techniques, which revealed that both techniques were suitable and in conformity with each other. Moreover, the results of analysis of variance and Prob > F < 0.05 showed the appropriate fit of the designated model with the experimental results. The probability of classifying the contributing variables by giving a percentage of the response quantity (Pb removal) made the Taguchi model an appropriate method for examining the effectiveness of different factors. pH was evaluated as the best input factor as it contributed 66.2% of Pb removal. The Taguchi technique was additionally confirmed by three-dimensional contour plots of CCD. Consequently, the Taguchi method with nine experimental runs and easy interaction plots is an appropriate substitute for CCD for several chemical engineering functions.

Trace analysis of some organophosphorus pesticides in rice samples using ultrasound-assisted dispersive liquid-liquid microextraction and high-performance liquid chromatography.

An ultrasound-assisted dispersive liquid-liquid microextraction based on solidification of a floating organic drop method followed by high-performance liquid chromatography was developed for the extraction, preconcentration, and determination of trace amounts of organophosphorus pesticides in rice samples. Variables affecting the performance of both steps were thoroughly investigated. Some effective parameters on extraction were studied and optimized. Under the optimum conditions, recoveries for rice sample are in the range of 58.0-66.0%. The calibration graphs are linear in the range of 4-800 µg/kg and, limits of detection and limits of quantification are in the range of 1.5-3 and 4.2-8.5 µg/kg, respectively. The relative standard deviation for 50.0 µg/kg of organophosphorus pesticides in rice sample are in the range of 4.4-5.1% (n = 5). The obtained results show that proposed method is a fast and simple method for the determination of pesticides in cereals.

The association between air pollution and weather conditions with increase in the number of admissions of asthmatic patients in emergency wards: a case study in Kermanshah.

BACKGROUND: Industrialization and urbanization had a devastating impact on public health and caused an increase in health related morbidity and mortality. In fact, asthma is a chronic condition which is considered as one of the significant challenges of public health. In this study, we investigated the association of air pollution and weather conditions with excess emergency ward admissions of asthmatic patients in Kermanshah hospitals. METHODS: This was an ecological study. The total number of hospital admissions to emergency wards from all related and major hospitals of Kermanshah was collected from September 2008 through August 2009. In addition, data on air pollution as well as meteorological data were collected from the Environmental Protection Agency and Meteorological Organization of Kermanshah. To determine the association between the number of hospitalization due to asthma with those parameters, Poisson regression was used. RESULTS: The results of Poisson regression revealed a significant association between carbon monoxide, ozone, nitrogen dioxide and temperature with emergency room visits due to asthma in Kermanshah. No associations were found for sulfur dioxide or for particulate matter. CONCLUSION: This study provides further evidence for the significant effect of monoxide carbon on asthma; and it suggests that temperature may have a role in the exacerbation of asthma. However, due to the multi-factorial nature of asthma, other factors also play a major role in the development and exacerbation of this illness.

Autism spectrum disorder: Cadmium and mercury concentrations in different biological samples, a systematic literature review and meta-analysis of human studies.

The present study was conducted to investigate the differences in cadmium (Cd) and mercury (Hg) concentrations between children with autism spectrum disorder (ASD) and controls. In this systematic review and meta-analysis study, three thousand one hundred forty-five studies were collected from scientific databases including Web of Science, Scopus, PubMed, and Google Scholar from January 2000 to October 2022 and were investigated for eligibility. As a result, 37 studies published in the period from 2003 to 2022 met our inclusion criteria and were considered in the meta-analysis. The heterogeneity assumption was evaluated using the Chi-squared-based Q-test and I-squared (I2) statistics. The pooled estimates were shown in the forest plots with Hedges' g (95% confidence interval) values. The random effects model demonstrated that there is no significant difference in the blood (Hedges' g: 0.14, 95% CI: 0.45, 0.72, p > 0.05), hair (Hedges' g: 0.12, 95% CI: 0.26, 0.50, p > 0.05), and urinary (Hedges' g: 0.05, 95% CI: 0.86, 0.76, p > 0.05) Cd levels of the case group versus control subjects. Moreover, the pooled findings of studies showed no significant difference in the blood (Hedges' g: 1.69, 95% CI: 0.09, 3.48, p > 0.05), hair (Hedges' g: 3.42, 95% CI: 1.96, 8.80, p > 0.05), and urinary (Hedges' g: 0.49, 95% CI: 1.29 - 0.30, p > 0.05) Hg concentrations. The results demonstrated no significant differences in Hg and Cd concentrations in different biological samples of children with ASD compared to control subjects.

Acrylamide in potato chips in Iran, health risk assessment and mitigation.

This study aimed to determine the acrylamide content in potato chips sold in Kermanshah, Iran and assess the potential health concerns associated with acrylamide exposure. HPLC-DAD was used to analyse 120 samples across 40 brands. The possible non-carcinogenic risk index for adults was below 1 for all 40 brands (100%), but for children it was only below 1 for 9 brands (22.5%) and above 1 for 31 brands (77.5%). Regarding the possible carcinogenic risk index, for adults only 1 out of 40 brands rated > 10-4, whereas for children all brands rated > 10-4. This shows that children's exposure to acrylamide through potato chips consumption in Kermanshah can be considered a risk on cancer and exposure of adults requires attention and monitoring. The best way to reduce acrylamide in potato chips and associated health risks is to improve the production process, especially temperature and time.

Transfer of heavy metals from soil to vegetables: A comparative assessment of different irrigation water sources.

This study aimed to assess the transfer factor (TF) of heavy metals (HMs) from soil to commonly consumed vegetables irrigated with different water sources. The field study covered 36 m2 of agricultural land in Kermanshah province, Iran, divided into nine equal-sized plots. Coriander, basil, and radish were the three types of vegetables cultivated and subjected to irrigation over two months, utilizing three different water sources: treated wastewater effluent (TWE), river water (RW), and well water + nitrogen fertilizer (WWF). After the irrigation and harvesting stages, soil samples from the cultivation area and harvested vegetables were collected. These samples underwent analysis using the ICP-OES method to assess HM levels and subsequent calculation of the TF of HMs from soil to plants. The results revealed that the TF levels indicated plants' relatively weak response (TF < 1) to the absorption of HMs. For non-toxic elements (Mn, Fe, Zn, Cu, Ni), TF values were generally higher than those for toxic elements (Cd, As, Pb) across all three vegetable types and irrigation treatments. The study's findings suggest that the TF of HMs in the studied vegetables varied based on the irrigation source and vegetable type. Various factors, including the type of irrigation source and vegetable, influenced the TF of HMs, each having different impacts on the transfer rate of each HM. The study highlights the importance of monitoring irrigation water and soil quality to prevent the accumulation of HMs in cultivated vegetables, thereby mitigating potential risks to human health.

Mixture effects of trace element levels on cardiovascular diseases and type 2 diabetes risk in adults using G-computation analysis.

There is an increasing concern about the health effects of exposure to a mixture of pollutants. This study aimed to evaluate the associations between serum levels of heavy/essential metals ([Arsenic (As), Cadmium (Cd), Mercury (Hg), Lead (Pb), Nickel (Ni), Chromium (Cr), Copper (Cu), Iron (Fe), and Zinc (Zn)]) and the risk of developing cardiovascular diseases (CVDs) and type 2 diabetes mellitus (T2D). Data were collected from 450 participants (150 with CVDs, 150 with T2D, and 150 healthy subjects) randomly selected from the Ravansar Non-Communicable Disease (RaNCD) cohort in Western Iran, covering the years 2018-2023. Trace element levels in the serum samples were assayed using ICP-MS. Logistic regression was performed to estimate the adjusted risk of exposure to single and multi-metals and CVD/T2D. Odds ratios were adjusted for age, sex, education, residential areas, hypertension, and BMI. The mixture effect of exposure to multi-metals and CVD/T2D was obtained using Quantile G-computation (QGC). In the logistic regression model, chromium, nickel, and zinc levels were associated with CVD, and significant trends were observed for these chemical quartiles (P < 0.001). Arsenic, chromium, and copper levels were also associated with T2D. The weight quartile sum (WQS) index was significantly associated with both CVD (OR 4.17, 95% CI 2.16-7.69) and T2D (OR 11.96, 95% CI 5.65-18.26). Cd, Pb, and Ni were the most heavily weighed chemicals in these models.The Cd had the highest weight among the metals in the CVD model (weighted at 0.78), followed by Hg weighted at 0.197. For T2D, the serum Pb (weighted at 0.32), Ni (weighted at 0.19), Cr (weighted at 0.17), and Cd (weighted at 0.14) were the most weighted in the G-computation model. The results showed the significant role of toxic and essential elements in CVDs and T2D risk. This association may be driven primarily by cadmium and mercury for CVDs and Pb, Ni, Cr, and Cd for T2D, respectively. Prospective studies with higher sample sizes are necessary to confirm or refute our preliminary results as well as to determine other important elements.

A worldwide systematic review of ochratoxin A in various coffee products - human exposure and health risk assessment.

Coffee is one of the most commonly consumed beverages worldwide, so assessing its quality for potential health risks is essential. Therefore, this review aimed to determine the levels of ochratoxin A (OTA) in coffee worldwide and then estimate its human intake and health risks. The systematic search took place from June 1997 to April 2024 and 40 of 254 articles were selected based on the selection criteria. The results showed significant differences in average levels of OTA between countries, continents and coffee types (p < 0.001). Of 3256 samples, OTA was detected in 1778, accounting for 54.6% of the total, with the percentage of positive results varying between 7.5% and 100%. Only two studies reported OTA average levels in roasted coffee exceeding the maximum limit (ML) set by the European Commission (ML-EC = 5 µg/kg). The average OTA in soluble coffee was lower than ML-EC (10 µg/kg) in all studies, and in instant coffee, the level of OTA was higher than ML-EC (10 µg/kg) only in one study. The estimated daily intake (EDI) of OTA in all coffee types was lower than the provisional tolerable daily intake (PTDI) values set by joint FAO/WHO Expert Committee on Food Additives (JECFA) (14 ng/kg bw/day) and proposed by the European Food Safety Authority (EFSA) (17 ng/kg bw/day). Non-carcinogenic risk assessment through coffee consumption indicated that the hazard quotient (HQ) was below the acceptable level, HQ = 1. The Margin of Exposure (MoE) for neoplastic effects was acceptable and unacceptable for non-neoplastic effects (NNE) in 4.5% (one of 22 cases) of the roasted and soluble coffees, but acceptable for all instant coffees. In conclusion, the study shows that the OTA content of coffee is not toxic to consumers worldwide. However, preventative measures should be taken, including inhibiting fungal growth and reducing OTA-producing fungal growth.

A systematic review and meta-analysis of the use of plant essential oils and extracts in the development of antimicrobial edible films for dairy application.

The purpose of this review was to assess the use of plant essential oils and extracts (PEOE) in the development of antimicrobial edible films for dairy application through a systematic review and meta-analysis. All studies published in multiple databases were explored via PRISMA protocol on November 1, 2022. According to the results, the interquartile range of pathogen reduction potential of essential oil (EO) in dairy products, irrespective of EO, film and product type, was 0.10 - 4.70 log CFU g-1 per % concentration. The findings from 38 articles indicate that among all EOs or their compounds, Zataria multiflora Boiss in protein film, thyme in protein film, Z. multiflora Boiss EO in protein film, Trans-cinnamaldehyde in carbohydrate film and lemongrass EO in protein film had extraordinary pathogen reduction potential on important foodborne pathogens. In the case of plant extract, fish gelatin film with Lepidium sativum extract, whey protein isolate film loaded with oregano EO and carboxymethyl cellulose film with clove EOs had the highest antimicrobial effect on mesophilic bacteria (9.50 log CFU g-1 per % concentration), yeast-mold (2.63 log CFU g-1 per % concentration) and mesophilic/ psychrophilic counts (> 9.06 log CFU g-1 per % concentration), respectively. Listeria monocytogenes is the primary species of interest; whereas, mesophiles and mold-yeast populations were the most investigated microbiota/mycobiota in cheese with PEOE-incorporated film. In light of these findings, the choice of PEOE at appropriate concentrations with the selection of appropriate edible film may improve the safety, sensory, and shelf life of dairy products.

The effects of active and passive smoking on selected trace element levels in human milk.

Our study aimed to compare levels of six micro-elements and six potentially toxic elements in the breast milk of non-smoking women compared to those found in women who smoke tobacco and women exposed to second-hand smoke during pregnancy and lactation. This was a cross-sectional study conducted on 100 lactating women in western Iran. The studied subjects were in three groups: passive smokers, active smokers, and a control group. Concentrations of selected trace elements in breast milk (essential and non-essential metals) were determined using ICP-MS. Our results indicated that the parameters of education, fruit consumption, and cosmetics usage had a significant difference among the groups (p < 0.05). Moreover, for trace elements, the Kruskal-Wallis test was statistically significant for arsenic (As), cadmium (Cd), mercury (Hg), and lead (Pb) (p < 0.05). The post hoc Dunn test revealed a significant difference in the levels of As, Cd, Hg, and Pb between non-smoker and passive/active smoker groups (p < 0.05). Our findings illustrate that exposure to cigarette smoke can cause an increase in the level of potentially toxic elements in human milk, which is dangerous for the consumption of premature newborns, but more research is needed to evaluate the potential toxic mechanisms of toxic metals.

Novel fabrication of the recyclable Bi7O9I3/chitosan and BiOI/chitosan heterostructure with improved photocatalytic activity for degradation of dimethyl phthalate under visible light.

Among the bismuth oxyhalides, bismuth oxide has the shortest band gap and high absorption power in the visible light region. Dimethyl phthalate (DMP) has been identified as endocrine-disrupting plasticizer and emerging pollutant, which was selected as the target pollutant to evaluate the efficacy of the studied catalytic process. In this work, Bi7O9I3/chitosan and BiOI/chitosan were efficaciously synthesized by the hydrothermal process method. Characterizing prepared photocatalysts was done by employing transmission electron microscopy, X-ray diffraction, scanning electron microscopy energy-dispersive spectroscopy, and diffuse reflectance spectroscopy. For this study, the test design was performed using the Box-Behnken Design (BBD) method in which the variables of pH, Bi7O9I3/chitosan dose, and dimethyl phthalate concentration were examined for the catalytic removal of dimethyl phthalate in the presence of visible light. Our detected results disclosed that the order of efficiency in DMP removal was as follows: Bi7O9I3/chitosan > BiOI/chitosan > Bi7O9I3 > BiOI. Also, the maximum pseudo-first-order kinetic coefficient for Bi7O9I3/chitosan was 0.021 (min)-1. When the synthesized catalysts were exposed to visible light irradiation, the predominant active species were O2- and h+ for degradation of DMP. The study on the reuse of Bi7O9I3/chitosan showed that this catalyst could be reused 5 times without significant reduction in efficiency, which indicates the cost-effectiveness and environmental friendliness of using this catalyst.

Chalcopyrite as an oxidants activator for organic pollutant remediation: A review of mechanisms, parameters, and future perspectives.

Advanced oxidation processes (AOPs) based on oxidants have attracted attention for the degradation of organic pollutants. The combination of chalcopyrite with oxidants such as persulfate, peroxide, percarbonate, and others shows promise as a system due to its ability to activate through various pathways, leading to the formation of numerous radical and non-radical species. In this review, the generation of sulfate radical (SR) and hydroxyl radical (HR) in AOPs were summarized. The significance of chalcopyrite in various approaches including Fenton, photo-Fenton, and photo/Fenton-like methods, as well as its involvement in electrochemical Fenton-based processes was discussed. The stability and reusability, toxicity, catalyst mechanism, and effects of operational parameters (pH, catalyst dosage, and oxidant concentration) are evaluated in detail. The review also discusses the role of Fe2+/3+, Cu1+/2+, S2- and Sn2- present in CuFeS2 in the generation of free radicals. Finally, guidelines for future research are presented in terms of future perspectives.

The prevalence and concentration of ochratoxin A in meat and edible offal: A global systematic review and meta-analysis.

The prevalence of ochratoxin A (OTA) in meat, edible offal, and meat products (MOP) was assessed through systematic review and meta-analysis. Four electronic databases were used to gather data from 1975 to September 15, 2022. Seventy-five articles comprising 8585 samples were identified and analyzed. The studies included in the analysis were conducted at a global level, with a predominant focus on Europe [72% (54/75)], Asia [13.33% (10/75)], Africa [13.33% (10/75)], and North America [1.33% (1/75)]. The overall prevalence of OTA in MOP was 39%. The highest and lowest prevalence percentages were recorded in Iraq (77%) and the USA (3%), respectively. Concerning food type, OTA prevalence was highest in the poultry gizzard (66%) and lowest in the cow liver (2%). The overall concentration of OTA in the MOP was 1.789 µg/kg. Poultry kidneys had the highest concentration of OTA (0.880-22.984 µg/kg), while pork had the lowest concentration (0.127-0.824 µg/kg). Conspicuous amounts of OTA contamination have been reported in fermented sausages. The lowest OTA concentration was found in Belgium (0.220 µg/kg) and the highest in Denmark (60.527µg/kg). These results can help food authorities minimize and control OTA in the MOP.