Diimidazolium Salt HBDIM: An Easily Available, Low-Cost, CageCarbene Precursor with Broad Applications in Transition Metal-Catalyzed Reactions.

The preparation of diimidazolium salt HBDIM 1, a precursor for a di-NHCs ligand, from cheap and easily available agent hexabenzylhexaazaisowurtzitane (HBIW) is reported. Under basic conditions, HBDIM undergoes facile deprotonation to in situ generate CageCarbene, which could efficiently coordinate to transition-metals, such as, Au, Cu or Pd, to give the corresponding bimetallic complexes 2-4. These complexes were isolated and fully characterized, including X-ray diffraction of their single crystals. It was found that the steric hinderance of CageCarbene is similar to that of SIMes but smaller than that of IPr, and electronically, CageCarbene is a strong σ-donator similar to SIMes and a stronger σ-donator than IPr. Further studies showed that complexes 2-4 were highly reactive to catalyze up to 17 reactions. Control experiments utilizing a N-benzyl-substituted monoimidazolium salt showed much lower catalytic reactivity when it was bound to Au or Cu, but exhibited similar reactivity for the Pd complex. Kinetic studies showed that the low reactivity of the monodentate carbene-ligated Au or Cu complex was due to the low stability of the complex under the reaction conditions.

[(SIPr)Ag(CF2 H)]: A Shelf-Stable, Versatile Difluoromethylation Reagent.

Due to its unique physical and electrophilic properties, the difluoromethyl group (-CF2 H) has been playing an irreplaceable role in the field of pharmaceutical and agrochemical industry. Methods that could efficiently incorporate the difluoromethyl group into the target molecules are increasing in the recent years. Developing a stable and efficient difluoromethylating reagent is thus highly attractive. In this review, we describe the development of a nucleophilic difluoromethylation reagent [(SIPr)Ag(CF2 H)], including its elemental reaction, difluoromethylation reaction with different types of electrophiles, and its application in the synthesis of a nucleophilic and an electrophilic difluoromethylthiolating reagent.

A Toolbox of Reagents for Trifluoromethylthiolation: From Serendipitous Findings to Rational Design.

Two types of electrophilic trifluoromethylthiolating reagents were developed in the past 10 years in our laboratory. The development of the first type of reagent, trifluoromethanesulfenate I, which is highly reactive toward a variety of nucleophiles, was based on an unexpected discovery in the initial design for the development of an electrophilic trifluoromethylthiolating reagent with a hypervalent iodine skeleton. A structure-activity study disclosed that α-cumyl trifluoromethanesulfenate (reagent II) without the iodo substituent is equally effective. Subsequent derivatization let us develop an α-cumyl bromodifluoromethanesulfenate III that could be used for the preparation of [18F]ArSCF3. To remediate the low reactivity of the type I electrophilic trifluoromethylthiolating reagent for Friedel-Crafts trifluoromethylthiolation of electron-rich (hetero)arenes, we designed and prepared N-trifluoromethylthiosaccharin IV, which exhibits broad reactivity toward various nucleophiles, including electron-rich arenes. A comparison of the structure of N-trifluoromethylthiosaccharin IV with that of N-trifluoromethylthiophthalimide showed that the replacement of one carbonyl group in N-trifluoromethylthiophthalimide with a sulfonyl group made N-trifluoromethylthiosaccharin IV much more electrophilic. Thus, the replacement of both carbonyls with two sulfonyl groups would further increase the electrophilicity. Such a rationale prompted us to design and develop the current most electrophilic trifluoromethylthiolating reagent, N-trifluoromethylthiodibenzenesulfonimide V, and its reactivity was much higher than that of N-trifluoromethylthiosaccharin IV. We further developed an optically pure electrophilic trifluoromethylthiolating reagent, (1S)-(-)-N-trifluoromethylthio-2,10-camphorsultam VI, for the preparation of optically active trifluoromethylthio-substituted carbon stereogenic centers. Reagents I-VI now constitute a powerful toolbox for the introduction of the trifluoromethylthio group into the target molecules.

Difluoromethylthiolator: A Toolbox of Reagents for Difluoromethylthiolation.

Recently, the strategic installation of a fluorine atom or a fluoroalkyl group site-selectively at the specific position of the target molecule has become a routine approach and daily practice for medicinal chemists in their endeavor to fine tune the structure of the lead compound to improve its physicochemical properties such as the cell membrane permeability and metabolic stability. Among many fluoroalkyl groups, the difluoromethylthio group (-SCF2H) has attracted recent intense attention. Largely due to the weak acidity of the proton in the difluoromethylthio group, the difluoromethylthio group is generally considered to be a lipophilic hydrogen-bonding donor and a bioisostere of the hydroxy/thio group that might interact with the heteroatom of the enzyme via a hydrogen bond to improve the binding selectivity of the drug molecule. Besides, the difluoromethylthio group is less lipophilic, less electron-withdrawing, and less stable to the acidic or basic environment than its analogue trifluoromethylthio group (-SCF3), making it easier to regulate the metabolic stability of drug molecules. These beneficial effects render the difluoromethylthio group one of the most favorable functional groups in drug design; consequently, there is an urgent need to develop new strategies for the efficient introduction of the difluoromethylthio group into small molecules under mild conditions. Over the last few decades, several different approaches to the preparation of difluoromethylthiolated compounds have been developed, including the difluoromethylation of thiolated substrates with an electrophilic/nucleophilic difluoromethylating reagent or the insertion of a difluoromethyl carbene into the S-H bond of the thiols. In contrast, we adopt an alternative approach to the preparation of difluoromethylthiolated compounds by late-stage direct difluoromethylthiolation of the specific substrates with a difluoromethylthiolating reagent. With this aim in mind, in the last 6 years we have successfully developed a toolbox of reagents that are capable of the direct introduction of the difluoromethylthio group into the target molecules, including nucleophilic difluoromethylthiolating reagent [(SIPr)AgSCF2H] I, electrophilic difluoromethylthiolating reagent PhthSCF2H II, three optically pure difluoromethylthiolating reagents camphorsultam-SCF2H III, radical difluoromethylthiolating reagent PhSO2SCF2H IV, and reagent PhSO2SCFClH V that could be used for the preparation of 18F-labeled [18F]ArSCF2H. These reagents reacted with a broad range of substrates to get access to difluoromethylthiolated compounds efficiently, thus providing medicinal chemists a powerful weapon for the direct introduction of the difluoromethylthio group into promising molecules during the search for new drugs.

[Ph4 P]+ [Cu(CF2 H)2 ]- : A Powerful Difluoromethylating Reagent Inspired by Mechanistic Investigation.

The quest of the active species in copper-mediated difluoromethylation of aryl halides led to the discovery of a powerful difluoromethylating reagent [Ph4 P]+ [Cu(CF2 H)2 ]- 2. Complex 2 was able to difluoromethylate a variety of electrophiles including electron-deficient and electron-rich aryl iodides, heteroaryl iodides, activated heteroaryl bromides, chloride and aryl bromides with a directing group, as well as other electrophiles such as alkenyl iodide, benzyl bromides, allyl bromides, alkyl iodide, allyl carbonates and acid chloride. In addition, in the presence of an oxidant, complex 2 reacted with various lithium nbutyl arylboronic acid pinacol esters, alkyne and heteroarene. Moreover, complex 2 could transmetalate the difluoromethyl reagent to other metals such as [Ph4 P]+ [CuCl2 ]- and [(DPPF)PdCl2 ].

Mechanistic Insight into Copper-Mediated Trifluoromethylation of Aryl Halides: The Role of CuI.

The synthesis, characterization, and reactivity of key intermediates [Cu(CF3)(X)]-Q+ (X = CF3 or I, Q = PPh4) in copper-mediated trifluoromethylation of aryl halides were studied. Qualitative and quantitative studies showed [Cu(CF3)2]-Q+ and [Cu(CF3)(I)]-Q+ were not highly reactive. Instead, a much more reactive species, ligandless [CuCF3] or DMF-ligated species [(DMF)CuCF3], was generated in the presence of excess CuI. On the basis of these results, a general mechanistic map for CuI-promoted trifluoromethylation of aryl halides was proposed. Furthermore, on the basis of this mechanistic understanding, a HOAc-promoted protocol for trifluoromethylation of aryl halides with [Ph4P]+[Cu(CF3)2]- was developed.

Difluoromethylation of Alkyl Bromides and Iodides with TMSCF2H.

We describe, for the first time, two protocols for direct difluoromethylation of unactivated alkyl bromides and iodides. Reactions of alkyl iodides with TMSCF2H were mediated by a copper catalyst using CsF as the activator, while reactions of less reactive alkyl bromides required a combination of palladium and a stoichiometric amount of CuI as the catalysts. Preliminary mechanistic studies of the synergistic Pd/Cu-catalyzed difluoromethylation of alkyl bromides suggest that it proceeds likely via a Pd(I)/Pd(III) catalytic cycle.

C(sp3)-CF3 Reductive Elimination from a Five-Coordinate Neutral Copper(III) Complex.

The reductive elimination from a high-valent late-transition-metal complex for the formation of a carbon-carbon or carbon-heteroatom bond represents a fundamental product-forming step in a number of catalytic processes. While reductive eliminations from well-defined Pt(IV), Pd(IV), Ni(III)/Ni(IV), and Au(III) complexes have been studied, the analogous reactions from neutral Cu(III) complexes remain largely unexplored. Herein, we report the isolation of a stable, five-coordinate, neutral square pyramidal Cu(III) complex that gives CH3-CF3 in quantitative yield via reductive elimination. Mechanistic studies suggest that the reaction occurs through a synchronous bond-breaking/bond-forming process via a three-membered ring transition state.

Two Ligands Transfer from Ag to Pd: En Route to (SIPr)Pd(CF2H)(X) and Its Application in One-Pot C-H Borylation/Difluoromethylation.

A process for the concurrent transfer of both the NHC ligand and the difluoromethyl group from [(SIPr)Ag(CF2H)] to PdX2 (X = Cl, OAc, and OPiv) for the preparation of [(SIPr)Pd(CF2H)X] complexes is described. These complexes were air-stable and easily underwent transmetalation with aryl pinacol boronate/reductive elimination to generate ArCF2H in high yields. Based on this discovery, the first one-pot C-H borylation and difluoromethylation process for the preparation of difluoromethylated (hetero)arenes was developed.

A Key Intermediate in Copper-Mediated Arene Trifluoromethylation, [nBu4 N][Cu(Ar)(CF3 )3 ]: Synthesis, Characterization, and C(sp2 )-CF3 Reductive Elimination.

The synthesis, characterization, and C(sp2 )-CF3 reductive elimination of stable aryl[tris(trifluoromethyl)]cuprate(III) complexes [nBu4 N][Cu(Ar)(CF3 )3 ] are described. Mechanistic investigations, including kinetic studies, studies of the effect of temperature, solvent, and the para substituent of the aryl group, as well as DFT calculations, suggest that the C(sp2 )-CF3 reductive elimination proceeds through a concerted carbon-carbon bond-forming pathway.

Synthesis and Reactivity of α-Cumyl Bromodifluoromethanesulfenate: Application to the Radiosynthesis of [18 F]ArylSCF3.

A highly reactive electrophilic bromodifluoromethylthiolating reagent, α-cumyl bromodifluoro-methanesulfenate 1, was prepared to allow for direct bromodifluoromethylthiolation of aryl boron reagents. This coupling reaction takes place under copper catalysis, and affords a large range of bromodifluoromethylthiolated arenes. These compounds are amenable to various transformations including halogen exchange with [18 F]KF/K222 , a process giving access to [18 F]arylSCF3 in two steps from the corresponding aryl boronic pinacol esters.

Palladium-Catalyzed Difluoromethylation of Aryl Chlorides and Triflates and Its Applications in the Preparation of Difluoromethylated Derivatives of Drug/Agrochemical Molecules.

A palladium-catalyzed difluoromethylation of a series of aryl chlorides and triflates under mild conditions was described. A variety of common functional groups were tolerated. In addition, by using this protocol, several drug molecules containing an aryl chloride unit were successfully difluoromethylated, thus enabling medicinal chemists to rapidly access novel drug derivatives with potentially improved properties via late-stage functionalization.

Monofluoromethyl-Substituted Sulfonium Ylides: Electrophilic Monofluoromethylating Reagents with Broad Substrate Scopes.

Two electrophilic monofluoromethylating reagents, monofluoromethyl(phenyl)sulfonium bis(carbomethoxy)methylide (3 a) and monofluoromethyl(4-nitrophenyl)sulfonium bis(carbomethoxy)methylide (3 b), and their reactions under mild conditions with a variety of nucleophiles, such as alcohols and malonate derivatives, sulfonic and carboxylic acids, phenols, amides, and N heteroarenes, are described. Mechanistic studies with deuterated reagents [D2 ]3 a/[D2 ]3 b suggest that these monofluoromethylation reactions proceed through an electrophilic substitution pathway.

Direct Monofluoromethylthiolation with S-(Fluoromethyl) Benzenesulfonothioate.

An electrophilic shelf-stable monofluoromethylthiolating reagent S-(fluoromethyl) benezenesulfonothioate (1) was developed. In the presence of a copper catalyst, reagent 1 coupled with a variety of aryl boronic acids to give the corresponding monofluoromethylthiolated arenes in high yields. In addition, addition of reagent 1 to alkyl alkenes in the presence of a silver catalyst gave alkyl monofluoromethylthioethers in high yields.

Enantioselective Construction of Trifluoromethoxylated Stereogenic Centers by a Nickel-Catalyzed Asymmetric Suzuki-Miyaura Coupling of Secondary Benzyl Bromides.

Trifluoromethoxy-substituted stereogenic centers can be constructed with high enantioselectivity by a nickel-catalyzed Suzuki-Miyaura coupling of readily available α-bromobenzyl trifluoromethyl ethers with a variety of aryl pinacol boronates. The coupling proceeds under mild reaction conditions, and a variety of common functional groups, such as fluoride, chloride, bromide, ester, enolizable ketone, nitro, cyano, amino, and vinyl moieties, were well tolerated. Furthermore, the reaction can be easily scaled up to gram quantities without a decrease in enantioselectivity.

Shelf-stable electrophilic reagents for trifluoromethylthiolation.

Fluorine, which is the most electronegative element and has a small atomic radius, plays a key role in pharmaceutical, agrochemical, and materials sciences. One of the fluoroalkyl groups, the trifluoromethylthio group (CF3S-), has been well-recognized as an important structural motif in the design of lead compounds for new drug discovery because of its high lipophilicity (Hansch lipophilicity parameter π = 1.44) and strong electron-withdrawing properties, which could improve the drug molecule's cell-membrane permeability and enhance its chemical and metabolic stability. While classic methods for the preparation of trifluoromethylthiolated compounds typically involve halogen-fluorine exchange reactions of polyhalogenomethyl thioethers or trifluoromethylation of sulfur-containing compounds under harsh reaction conditions, an alternative but more attractive strategy is direct trifluoromethylthiolation of the substrate at a late stage by employing an electrophilic trifluoromethylthiolating reagent. Although several electrophilic trifluoromethylthiolating reagents have been reported previously, these reagents either require a strong Lewis acid/Brønsted acid as an activator or suffer from a toxic nature or limited substrate scope. To address these problems, in late 2011 we initiated a project with the aim to develop new, shelf-stable, and highly reactive electrophilic trifluoromethylthiolating reagents that could easily install the trifluoromethylthio group at the desired positions of the drug molecule at a late stage of drug development. Inspired by the broad reactivity of the hypervalent iodine reagent, we initially discovered a highly reactive trifluoromethylthiolating reagent, trifluoromethanesulfenate 1a. Structure-reactivity studies disclosed that the iodine atom of reagent 1a does not play an important role in this reagent's reactivity. Consequently, a simplified second-generation electrophilic reagent, trifluoromethanesulfenate 1b, was developed. In parallel, we developed another shelf-stable, highly reactive electrophilic reagent with a broad substrate scope, N-trifluoromethylthiosaccharin (2). In this Account, we mainly describe our discovery of these two different types of electrophilic trifluoromethylthiolating reagents, trifluoromethanesulfenates 1a and 1b and N-trifluoromethylthiosaccharin 2. Systematic studies showed that both types of reagents are highly reactive toward a wide range of nucleophiles, yet the substrate scopes of these two different types of reagents are complementary. In particular, reagents 1a and 1b are more reliable in transition-metal-catalyzed reactions such as copper-catalyzed trifluoromethylthiolation of aryl/vinyl/alkylboronic acids and silver-catalyzed decarboxylative trifluoromethylthiolation of aliphatic carboxylic acids as well as in the organocatalytic asymmetric trifluoromethylthiolation of ß-keto esters and oxindoles. Reagent 2 is more electrophilic than reagents 1a and 1b and is more efficient for direct trifluoromethylthiolation with nucleophiles such as alcohols, amines, thiols, and electron-rich arenes. The ease in preparation, broad scope, and mild reaction conditions make reagents 1a, 1b, and 2 very attractive as general reagents that allow rapid installation of the trifluoromethylthio group into small molecules.

N-Trifluoromethylthio-dibenzenesulfonimide: A Shelf-Stable, Broadly Applicable Electrophilic Trifluoromethylthiolating Reagent.

The super electrophilicity of a shelf-stable, easily prepared trifluoromethylthiolating reagent N-trifluoromethylthio-dibenzenesulfonimide 7 was demonstrated. Consistent with the theoretical prediction, 7 exhibits reactivity remarkably higher than that of other known electrophilic trifluoromethylthiolating reagents. In the absence of any additive, 7 reacted with a wide range of electron-rich arenes and activated heteroarenes under mild conditions. Likewise, reactions of 7 with styrene derivatives can be fine-tuned by simply changing the reaction solvents to generate trifluoromethylthiolated styrenes or oxo-trifluoromethylthio or amino-trifluoromethylthio difunctionalized compounds in high yields.

Direct Difluoromethylation of Alcohols with an Electrophilic Difluoromethylated Sulfonium Ylide.

A general method for the formation of alkyl difluoromethylethers under mild reaction conditions and with good functional-group tolerance was developed. The development of the method was based on the invention of a stable, electrophilic, difluoromethylating reagent, difluoromethyl-(4-nitrophenyl)-bis(carbomethoxy) methylide sulfonium ylide, which was synthesized by reaction of the easily available 4-nitrophenyl (difluoromethyl)thioether and dimethyl diazomalonate in the presence of a rhodium catalyst.

PhSO2 SCF2 H: A Shelf-Stable, Easily Scalable Reagent for Radical Difluoromethylthiolation.

A new shelf-stable and easily scalable difluoromethylthiolating reagent S-(difluoromethyl) benzenesulfonothioate (PhSO2 SCF2 H) was developed. PhSO2 SCF2 H is a powerful reagent for radical difluoromethylthiolation of aryl and alkyl boronic acids, decarboxylative difluoromethylthiolation of aliphatic acids, and a phenylsulfonyl-difluoromethylthio difunctionalization of alkenes under mild reaction conditions.