RESUMO
Antiferroelectric (AFE) materials, characterized by double electric hysteresis loops, can be transformed to the ferroelectric (FE) phase under an external electric field, making them promising candidates for electronic energy storage and solid-state refrigeration. Additionally, the field-induced strain in AFE materials is contingent upon the direction of the electric field, rendering it with a switching characteristic. Although AFE materials have made progress in the field of energy storage and negative electrocaloric effect, the coexistence of AFE and ferroelasticity is still rarely reported. Here, two isomorphic organic-inorganic hybrid perovskites, HDAEPbCl4 and HDAEPbBr4 (HDAE is [2-(hydroxydimethylammonio)ethan-1-aminium]), exhibiting FE-AFE-PE (PE is paraelectric) phase transitions, are presented. Remarkably, the temperature range where AFE and ferroelasticity coexist is significantly broadened from 59.9 K to 115.1 K by strengthening short-range forces via halogen substitution. This discovery extends the family of FE, AFE, and ferroelastic materials, contributing to the development of multifunctional materials and advancing multifunctional material development.
RESUMO
The remarkable material stability and structural diversity of two-dimensional (2D) organic-inorganic hybrid perovskites (OIHPs) constitute a vast available library of versatile materials. In particular, ferroelastic property, for which the spontaneous strain can be transformed by applying mechanical stress, is very promising for extensive nanotechnological applications. However, integrating ferroelastic property into 2D OIHPs is still in its infancy. Herein, we designed two new 2D OIHPs (C3 H5 CH2 NH3 )2 [MCl4 ] (M=Mn for 1 and Cd for 2), which undergo reversible ferroelastic phase transitions with an Aizu expression 4/mmmFmmm. The templating influence of the more distorted inorganic framework on the disordering of organic cations and the stronger hydrogen bonds has a key role in the striking improvement of Curie temperature from 246â K in 1 to 273â K in 2. Meanwhile, the minimized alteration of structural motif ensures the well maintaining of the ferroelastic performance in the forms of crystals and thin films, as demonstrated by the identifiable evolution of domain structures. This work will provide a fertile new ground for enlarging the limited number of 2D ferroelastic OIHPs with better practical utility.
RESUMO
Hybrid organic-inorganic perovskites with structural transformation have garnered continued interest in recent years for their potential as multifunctional materials in the field of optoelectronics and smart devices. Herein, we report a novel hybrid organic-inorganic halide, [C5NOH12]2[Cd1.5Cl5(H2O)] (1). Remarkably, the centrosymmetric compound 1 undergoes a structural transformation to a novel noncentrosymmetric hybrid perovskite [C5NOH12][CdCl3] (2) after dehydration. Accompanied by the chemical bond cleavage and reorganization, the zero-dimensional (0D) trinuclear cluster in compound 1 transforms into an intriguing one-dimensional (1D) hexagonal perovskite structure in compound 2, generating multiple optoelectronic switching behaviors. It is worth mentioning that compound 2 demonstrates successive structural phase transitions at 353 and 405 K, resulting in switchable second harmonic generation (SHG) and a dual dielectric response. In addition, compounds 1 and 2 both feature blue-light luminescence, with respective photoluminescence lifetimes of 0.73 and 1.42 ns. This work will offer a pioneering approach and expansive potential for the preparation and development of hybrid organic-inorganic perovskite materials with superior properties.
RESUMO
Two-dimensional organic-inorganic hybrid perovskites (OIHPs) have gained attention as a result of their flexibility and adjustability of the structure. However, the large band gap of two-dimensional perovskites limits their application in the photoelectric field. In the present work, we report a two-dimensional organic-inorganic hybrid compound of (C7H18N2)PbI4 (1) with a narrow band gap, which consists of [PbI4]2-n layers and N-(2-aminoethyl)piperidinium cations. 1 exhibits semiconducting properties with a narrow optical band gap of â¼2.02 eV and a photoelectric response with a ratio of photocurrent to dark current of â¼100. In addition, it exhibits a reversible solid-state phase transition at 228 K. This finding should inspire research into more 2D layered OIHPs with the combination of phase transition and semiconductor properties.
RESUMO
Although the first ferroelectric discovered in 1920 is Rochelle salt, a typical molecular ferroelectric, the front-runners that have been extensively studied and widely used in diverse applications, such as memory elements, capacitors, sensors, and actuators, are inorganic ferroelectrics with excellent electrical, mechanical, and optical properties. With the increased concerns about the environment, energy, and cost, molecular ferroelectrics are becoming promising supplements for inorganic ferroelectrics. The unique advantages of high structural tunability and homochirality, which are unavailable in their inorganic counterparts, make molecular systems a good platform for manipulating ferroelectricity. Remarkably, based on the Neumann's principle and the Curie symmetry principle defining the group-to-subgroup relationship, we have found some outstanding high-temperature molecular ferroelectrics, like diisopropylammonium bromide (DIPAB) with a large spontaneous polarization up to 23 µC/cm2 ( Fu, D. W.; et al. Science 2013 , 339 , 425 ). However, their application potential is severely limited by the uniaxial nature, leading to major issues in finding proper substrates for thin-film growth and achieving high thin-film performance. Inspired by the commercialized inorganic ferroelectrics like Pb(Zr, Ti)O3 (PZT), where the multiaxial nature contributes greatly to the optimized ferroelectric and piezoelectric performance, developing high-temperature multiaxial molecular ferroelectrics is an imminent task. In this Account, we review our recent research progress on the targeted design of multiaxial molecular ferroelectrics. We first propose the "quasi-spherical theory", a phenomenological theory based on the Curie symmetry principle, to modify the spherical cations to a low-symmetric quasi-spherical geometry for acquiring the highly symmetric paraelectric phase and the polar ferroelectric phase of multiaxial ferroelectrics simultaneously. Besides the sizes and weights of the cation and anion, the intermolecular interactions are particularly crucial for decelerating the molecular rotation at low temperature to reasonably induce ferroelectricity. It means that the momentums of the cation and anion should be matched, so we describe the "momentum matching theory". In particular, introducing homochirality, a superiority of molecular materials over the inorganic ones, was demonstrated as an effective approach to increase the incidence of ferroelectric crystal structures. Thanks to the striking chemical variability and structure-property flexibility of molecular materials, our research efforts outlined in this Account have led to and will further motivate the richness and the application exploration of high-temperature, high-performance multiaxial molecular ferroelectrics, along with the implementation and perfection of the targeted design strategies.
RESUMO
In the last decade, hybrid materials have received widespread attention. In particular, hybrid lead halide perovskite-type semiconductors are very attractive owing to their great flexibility in band gap engineering. Here, by using precise molecular modifications, three one-dimensional perovskite-type semiconductor materials are designed and obtained: [Me3 PCH2 X][PbBr3 ] (X=H, F, and Cl for compoundsâ 1, 2, and 3, respectively). The introduction of a heavier halogen atom (F or Cl) to [Me4 P]+ increases the potential energy barrier required for the tumbling motion of the cation, hence achieving the transformation of the phase transition temperature from low temperature (192â K) to room temperature (285â K) and high temperature (402.3â K). Moreover, the optical band gaps reveal a broadening trend with 3.176â eV, 3.215â eV, and 3.376â eV along the HâFâCl series, which is attributed to the formation of the structural distortion.
RESUMO
Molecular phase transition compounds have become a hot research area in recent years because of their potential as functional materials, such as ferroelectrics, ferroelastics, dielectric switches, etc. However, materials combining switchable dielectric properties and ferroelasticity are still rare. Here, we reported an organic-inorganic hybrid perovskite, [CPtmp][Cd(SCN)3] (1) ([CPtmp]+ is a cyclopentyltrimethylphosphonium cation), with a potential ferroelastic property. This material undergoes three structural phase transitions at 247/226, 335/312, and 349/341 K (upon heating/cooling). The successive phase transitions are mainly caused by the stepwise ordering of [CPtmp]+ cations and the concomitant deformation of [Cd(SCN)3]- anionic chains revealed by structural analyses, which triggers the double-step dielectric switching in 1 as well. These results would inspire further exploration on molecular dielectric switches with ferroelastic properties.
RESUMO
The one-dimensional (1D) ABX3-type perovskite [(CH3)3PCH2F]CdCl2Br (1) has been obtained on the basis of the design of an organic-inorganic hybrid. Strikingly, it experiences sequential phase transitions at around 295 and 336 K, respectively. Given the noticeable steplike dielectric anomalies in the vicinity of 295 K, 1 is identified as a promising dielectric-switchable material. According to the single-crystal structure analysis, the order-to-disorder transformation of the [(CH3)3PCH2F]+ cation is the main reason for the phase transitions and the change of space group from the orthorhombic Pnma (No. 62) to the hexagonal P63/m (No. 176). This design of a perovskite structure will inspire more advances in the ever-growing field of switchable functional materials.
RESUMO
Dual phase transition/switch materials are a critical cornerstone of information storage and sensing. However, they are difficult to design successfully, and compared with materials showing single-switchable phase transitions, the dual ones retain many challenges by far. Therefore, the significance of a general strategy is far greater than an accidental success. Here, an efficient strategy combining branchlike Et3R and trunklike benzylamine analogues successfully validates dual-switch implementation in the dielectric materials. This inevitable success is based on our treelike analogue mentioned above in which amines with multiple branches can achieve a temperature-induced phase change. Exactly, (BCDA)2ZnBr4 [BCDA = benzyl-(2-chloroethyl)dimethylammonium] proves the regularity and undergoes two reversible phase transitions at 295.4 and 340.8 K, respectively. Variable-temperature single-crystal X-ray diffraction revealed that the generation of double phase transitions is caused by progressive changes of treelike BCDA+ as the temperature rises. Because the permittivity ε' of (BCDA)2ZnBr4 abruptly changed near the phase-transition temperatures, such physical properties make it have latent applicability. In short, the success of our strategy will inspire researches to discover more interesting dual phase transition/switch materials.
RESUMO
The past decade has witnessed much progress in designing molecular ferroelectrics, whose intrinsic mechanical flexibility, structural tunability, and easy processability are desirable for next-generation flexible and wearable electronic devices. However, an obstacle in expanding their promising applications in nonvolatile memory elements, capacitors, and sensors is effectively modulating the Curie temperature ( Tc). Here, taking advantage of fluorine substitution on the reported molecular ferroelectric, (pyrrolidinium)MnCl3, we present enantiomeric perovskite ferroelectrics, namely, ( R) - and ( S) -3-(fluoropyrrolidinium)MnCl3. The close van der Waal's radii and the similar steric parameters between H and F atoms ensure the minimum disruption of the crystal structure, while their different electronegativity and polarizability can trigger significant changes in the physical and chemical properties. As expected, the Tc gets successfully increased from 295 K in (pyrrolidinium)MnCl3 to 333 K in these two homochiral compounds. Such a dramatic enhancement of 38 K signifies an important step toward designing high- Tc molecular ferroelectrics. In the light of the conceptually new idea of fluorine substitution, one could look forward to a continuous succession of new molecular ferroelectric materials and technology developments.
RESUMO
Two-dimensional (2D) organic-inorganic perovskites (OIPs), with improved material stability over their 3D counterparts, are highly desirable for device applications. It is their considerable structural diversity that offers an unprecedented opportunity to engineer materials with fine-tuning functionalities. The isosteric substitution of hydrogen by an electronegative fluorine atom has been proposed as a useful route to improve the photovoltaic performance of 2D OIPs, whereas its valuable role in developing ferroelectricity is still waiting for further exploration. Herein, for the first time we applied fluorinated aromatic cations in extending the family of 2D OIP ferroelectrics, and successfully obtained [2-fluorobenzylammonium]2PbCl4 as a high-performance ferroelectric semiconductor. The failures in the nonferroelectric [4-fluorobenzylammonium]2PbCl4 and [3-fluorobenzylammonium]2PbCl4 demonstrate that the selective introduction of fluorine in correct structural positions is particularly essential. This work represents an unprecedented proof-of-concept in the use of fluorinated aromatic cations for the targeted design of excellent 2D OIP ferroelectrics, and is believed to inspire the future development of low-cost, high-efficiency, and stable device applications.
RESUMO
Organic-inorganic hybrid perovskite-type multiferroics have attracted considerable research interest owing to their fundamental scientific significance and promising technological applications in sensors and multiple-state memories. The recent achievements with divalent metal dicyanamide compounds revealed such malleable frameworks as a unique platform for developing novel functional materials. Herein, two 3D organic-inorganic hybrid perovskites [Et3 P(CH2 )2 F][Mn(dca)3 ] (1) and [Et3 P(CH2 )2 Cl][Mn(dca)3 ] (2) (dca=dicyanamide, N(CN)2 - ) are presented. Accompanying the sequential phase transitions, they display a broad range of intriguing physical properties, including above room temperature ferroelastic behavior, switchable dielectricity, and low-temperature antiferromagnetic ordering (Tc =2.4â K for both 1 and 2). It is also worth noting that the spontaneous strain value of 1 is far beyond that of 2 in the first ferroelastic phase, as a result of the precise halogen substitution. From the point view of molecular design, this work should inspire further exploration of multifunctional molecular materials with desirable properties.
RESUMO
With regard to the artificial molecular motor that was recognized with the 2016 Nobel Prize, this success proves the great scientific significance of rotary motor-type motion at the molecular level, which has been expected to play an invaluable role in the development of electronic information molecular materials. However, designing electronic information-critical high-temperature molecular motors has always been a huge challenge. Since we discovered [(CH3)3NCH2Cl]MnCl3, this cation rotation pattern with a motor-type motion structure has continued to attract our attention. Considering a strategy that combines molecular machines with dielectric theory, ( N, N-dimethylpiperidinium)CdCl3, the new dielectric molecular motor material that exhibits superior physical properties, could be considered to be an excellent dielectric switch based on its electric field and temperature. Crystal structure analyses reveal that the reversible phase transition is mainly induced by the unusual chair-to-rotator motion of cations. Because of the unprecedented leaping structural transition from P63/ mmc to P21/ c and the rotating motor-type motion structure, the material exhibits remarkable anisotropy and outstanding dielectric switching characteristics. These findings open a new avenue for the design and assembly of novel molecular motor materials in the field of electronic information.
RESUMO
Though dominating most of the practical applications, inorganic ferroelectric thin films usually suffer from the high processing temperatures, the substrate limitation, and the complicated fabrication techniques that are high-cost, energy-intensive, and time-consuming. By contrast, molecular ferroelectrics offer more opportunities for the next-generation flexible and wearable devices due to their inherent flexibility, tunability, environmental-friendliness, and easy processability. However, most of the discovered molecular ferroelectrics are uniaxial, one major obstacle for improving the thin-film performance and expanding the application potential. In this Perspective, we overview the recent advances on multiaxial molecular ferroelectric thin films, which is a solution to this issue. We describe the strategies for screening multiaxial molecular ferroelectrics and characterizations of the thin films, and highlight their advantages and future applications. Upon rational and precise design as well as optimizing ferroelectric performance, the family of multiaxial molecular ferroelectric thin films surely will get booming in the near future and inject vigor into the century-old ferroelectric field.
RESUMO
It is known that perovskites with the general chemical formula of ABX3 (A, B = cations, X = anion) have been intensively studied over the last half century because of their diverse functional properties, such as ferroelectricity in BaTiO3, piezoelectricity in PZT (lead zirconate titanate), and recently developed photovoltaic properties in CH3NH3PbI3. However, rather less attention has been paid to their "inverse" analogs, antiperovskites, which have a chemical formula X3BA, where A and B are anions and X is a cation. Although most of important ferroelectrics are perovskites, no antiperovskite ferroelectrics have been found since the discovery of antiperovskites in 1930. Here, for the first time, we report a X3BA antiperovskite ferroelectric [(CH3)3NH]3(MnBr3)(MnBr4) (where (CH3)3NH is X, MnBr3 is B, and MnBr4 is A), which shows outstanding ferroelectricity with a significantly high phase transition temperature of 458 K as well as fascinating photoluminescence properties with two intense emissions. This finding opens a new avenue to explore the golden area of antiperovskites for high-performance functional materials.
RESUMO
Organic-inorganic hybrid perovskite, [CH3NH3]PbI3, holds a great potential for next-generation solar devices. However, whether the ferroelectricity exists in [CH3NH3]PbI3 and results in the ultrahigh performance is not at present clear. Beyond that, no hybrid lead iodide perovskite ferroelectric has yet been found. Here, using precise molecular modifications, we successfully designed a room-temperature hybrid perovskite ferroelectric, [(CH3)3NCH2I]PbI3. Because of the high-symmetry and nearly spherical shape of [(CH3)4N]+ cation, [(CH3)4N]PbI3 crystallizes in a centrosymmetric space group P63/ m at room temperature and undergoes a structural phase transition at 184 K. Accompanied by the introduction of halogen atoms on the cation from F to I, the phase transition temperature gradually increases to 312 K and the space group transforms into a polar C2 at room temperature. The strongest halogen bond energy of [(CH3)3NCH2I]-I and the largest volume of [(CH3)3NCH2I]+ among these compounds might be possible reasons for the stabilization of ordered [(CH3)3NCH2I]+ cation array and further reservation of its ferroelectricity at relatively high temperature. This work provides an efficient molecular design strategy toward the targeted harvest of room-temperature organic-inorganic perovskite ferroelectrics, and should inspire further exploration of the interplay between structure and ferroelectricity. The discovery of lead iodide perovskite ferroelectric also offers a foothold to the possibility for the existence of ferroelectricity in [CH3NH3]PbI3.
RESUMO
Due to having excellent properties of sensitive switchable physical and/or chemical response, simple preparation, and environmentally friendly processing, bistable switches (electric switching between "on" and "off" bistable states) have gradually developed into an ideal class of highly smart materials. However, most of them contain metals, especially heavy metals, which are highly toxic to the environment, and metal-free switch materials are rarely reported. Based on this issue, we successfully designed and synthesized organic ion crystals and realized thermal dielectric switching characteristics. Differential scanning calorimetry and dielectric measurements show that the large-size crystal (F-TEDA)(BF4)2 (1) can be regarded as an sensitive dielectric bistable switching between high (switch on) and low (switch off) dielectric states. Variable-temperature single crystal structure reveals one-half of the BF4- anions in the crystal undergoes order-disorder transition around 200 K, similar to the transition between flower buds and blooming flowers. This flower-style transition of BF(1)4-/BF(0.5)8- triggered the rapid switching performance; those properties establish the basis of their applications in excellent temperature-responsive electrical switches, especially lightweight devices.
RESUMO
The perovskite structure is rich in ferroelectricity. In contrast, ferroelectric antiperovskites have been scarcely confirmed experimentally since the discovery of M3 AB-type antiperovskites in the 1930s. Ferroelectricity is now revealed in an organic-inorganic hybrid X3 AB antiperovskite structure, which exhibits a clear ferroelectric phase transition 6/mmmF6mm with a high Curie point of 480â K. The physical properties across the phase transition are obviously changed along with the symmetry requirements, providing solid experimental evidence for the ferroelectric phase transition. More interestingly, the discovered antiperovskite shows intense photoluminescence and triboluminescence properties. The confirmation of the triboluminescent ferroelectric antiperovskite will open new avenues to explore excellent optoelectronic properties in the antiperovskite family.
RESUMO
To date, the field of ferroelectric random access memories (FeRAMs) is mainly dominated by inorganic ferroelectric thin films like Pb(Zr,Ti)O3, which suffer from the issues of environmental harmfulness, high processing temperatures, and high fabrication costs. In these respects, molecular ferroelectric thin films are particularly advantageous and thus become promising alternatives to the conventional inorganic ones. For the prospect of FeRAMs applications, they should fulfill the requirements of effective polarization switching and low-voltage, high-speed operation. Despite recent advancements, molecular ferroelectric thin films with such high performance still remain a huge blank. Herein we present the first example of a large-area continuous biaxial molecular ferroelectric thin film that gets very close to the goal of application in FeRAMs: [Hdabco]BF4 (dabco = diazabicyclo[2.2.2]octane). In addition to excellent film performance, it is the coexistence of a low coercive voltage of â¼12 V and ultrafast polarization switching at a significantly high frequency of 20 kHz that affords [Hdabco]BF4 considerable potential for memory devices. Particularly, piezoresponse force microscopy (PFM) clearly demonstrates the four polarization directions and polarization switching at a low voltage down to â¼4.2 V (with an â¼150 nm thick film). This innovative work on high-performance molecular ferroelectric thin films, which can be compatible with wearable devices, will inject new vitality to the low-power information field.
RESUMO
With the flourishing development of (CH3NH3)PbI3, three-dimensional (3D) organic-inorganic perovskites with unique structure-property flexibility have become a worldwide focus. However, they still face great challenges in effectively inducing ferroelectricity. Despite the typical 3D perovskite structure and the ability of dabco (1,4-diazabicyclo[2.2.2]octane) to trigger phase transition, unfortunately [H2dabco]RbCl3 adopts a nonpolar crystal structure without ferroelectricity. Within the larger RbI3 framework, we assemble N-methyl-1,4-diazoniabicyclo[2.2.2]octane (MeHdabco) obtained by reducing the molecular symmetry of dabco into a new 3D organic-inorganic perovskite. As expected, MeHdabco bearing a molecular dipole moment turns out to be vital in the generation of polar crystal structure and ferroelectric phase transition occurring at 430 K. It is the first time that the dabco component has been successfully wrapped into a 3D cage to achieve ferroelectricity even through there is intensive research on dabco. This precise molecular design strategy based on the modification of molecular symmetry provides an efficient route to enrich the family of 3D organic-inorganic perovskite ferroelectrics. Intriguingly, the iodine-doped crystal can exhibit intense saffron yellow luminescence with a high quantum yield of 17.17% under UV excitation, extending its application in the field of ferroelectric luminescence and/or multifunctional devices.