Oxidative Coupling of Methane: Examining the Inactivity of the MnOx -Na2 WO4 /SiO2 Catalyst at Low Temperature.

Oxidative coupling of methane (OCM) catalyzed by MnOx -Na2 WO4 /SiO2 has great industrial promise to convert methane directly to C2-3 products, but its high light-off temperature is the most challenging obstacle to commercialization and its working mechanism is still a mystery. We report the discovery of a low-temperature active and selective MnOx -Na2 WO4 /SiO2 catalyst enriched with Q2 units in the SiO2 carrier, being capable of converting 23 % CH4 with 72 % C2-3 selectivity at 660 °C. From experiments and theoretical calculations, a large number of Q2 units in the MnOx -Na2 WO4 /SiO2 catalyst is a trigger for markedly lowering the light-off temperature of the Mn3+ ↔Mn2+ redox cycle involved in the OCM reaction because of the easy formation of MnSiO3 . Notably, the MnSiO3 formation proceeds merely through the SiO2 -involved reaction in the presence of Na2 WO4 : Mn7 SiO12 +6 SiO2 ↔7 MnSiO3 +1.5 O2 . The Na2 WO4 not only drives the light-off of this cycle but also gets it working with substantial selectivity toward C2-3 products. Our findings shine a light on the rational design of more advanced MnOx -Na2 WO4 based OCM catalysts through establishing new Mn3+ ↔Mn2+ redox cycles with lowered light-off temperature.

Mechanistic Insights into Ethylene Transformations on Ir(111) by Density Functional Calculations and Microkinetic Modeling.

Ethylidyne, ethane, and carbon monomer formations from ethylene over Ir(111) at different coverages are investigated using density functional theory methods. Two possible reaction mechanisms for ethylidyne formation are investigated. The calculations show that vinyl prefers the dehydrogenation to yield vinylidene (M2) over the hydrogenation to produce ethylidene (M1) kinetically and thermodynamically at 1/9 (1/3) ML. Ethylidyne formation could be a competitive side reaction of ethylene hydrogenation, however, the ethylidyne species does not directly participate in the ethylene hydrogenation mechanism. The mechanism for C monomer formation is also studied. Microkinetic modeling shows that the ethylene hydrogenation reactivity decreases in the sequence Ir(111)>Rh(111)>Pd(111)>Pt(111) under typical hydrogenation conditions. The catalytic activity of ethylene hydrogenation decreases with increased stability of ethylene adsorption and reaction barrier of the rate-limiting step.

Chemical vapor deposition-prepared sub-nanometer Zr clusters on Pd surfaces: promotion of methane dry reforming.

An inverse Pd-Zr model catalyst was prepared by chemical vapor deposition (CVD) using zirconium-t-butoxide (ZTB) as an organometallic precursor. Pd-Zr interaction was then investigated with focus on the correlation of reforming performance with the oxidation state of Zr. As test reactions, dry reforming of methane (DRM) and methanol steam reforming (MSR) were chosen. Depending on treatments, either ZrOxHy or ZrO2 overlayers or Zr as sub-nanometer clusters could be obtained. Following the adsorption of ZTB on Pd(111), a partially hydroxylated Zr4+-containing layer was formed, which can be reduced to metallic Zr by thermal annealing in ultrahigh vacuum, leading to redox-active Zr0 sub-nanometer clusters. Complementary density functional theoretical (DFT) calculations showed that a single layer of ZrO2 on Pd(111) can be more easily reduced toward the metallic state than a double- and triple layer. Also, the initial and resulting layer compositions greatly depend on gas environment. The lower the water background partial pressure, the faster and more complete the reduction of Zr4+ species to Zr0 on Pd takes place. Under methanol steam reforming conditions, water activation by hydroxylation of Zr occurs. In excess of methanol, strong coking is induced by the Pd/ZrOxHy interface. In contrast, dry reforming of methane is effectively promoted if these initially metallic Zr species are present in the pre-catalyst, leading to a Pd/ZrOxHy phase boundary by oxidative activation under reaction conditions. These reaction-induced active sites for DRM are stable with respect to carbon blocking or coking. In essence, Zr doping of Pd opens specific CO2 activation channels, which are absent on pure metallic Pd.

Recent progress in hierarchical nanostructures for Ni-based industrial-level OER catalysts.

Exploring efficient and low-cost oxygen evolution reaction (OER) electrocatalysts reaching the industrial level current density is crucial for hydrogen production via water electrolysis. In this feature article, we summarize the recent progress in hierarchical nanostructures for the industrial-level OER. The contents mainly concern (i) the design of a hierarchical structure; (ii) a Ni-based hierarchical structure for the industrial current density OER; and (iii) the surface reconstruction of the hierarchical structure during the OER process. The work provides valuable guidance and insights for the manufacture of hierarchical nanomaterials and devices for industrial applications.

Carbon-Based Composites for Oxygen Evolution Reaction Electrocatalysts: Design, Fabrication, and Application.

The four-electron oxidation process of the oxygen evolution reaction (OER) highly influences the performance of many green energy storage and conversion devices due to its sluggish kinetics. The fabrication of cost-effective OER electrocatalysts via a facile and green method is, hence, highly desirable. This review summarizes and discusses the recent progress in creating carbon-based materials for alkaline OER. The contents mainly focus on the design, fabrication, and application of carbon-based materials for alkaline OER, including metal-free carbon materials, carbon-based supported composites, and carbon-based material core-shell hybrids. The work presents references and suggestions for the rational design of highly efficient carbon-based OER materials.

Structural engineering evoked multifunctionality in molybdate nanosheets for industrial oxygen evolution and dual energy storage devices inspired by multi-method calculations.

Structural engineering, including electronic and geometric modulations, is a good approach to improve the activity of electrocatalysts. Herein, we employed FeOOH and the second metal center Ni to modulate the electronic structure of CoMoO4 and used a low temperature solvothermal route and a chemical etching method to prepare the special hollow hierarchical structure. Based on the prediction of multi-method calculations by density functional theory (DFT) and ab initial molecular dynamics (AIMD), a series of materials were fabricated. Among them, the optimal hollow FeOOH/(Ni1Co1)MoO4 by coating (NiCo)MoO4 nanosheets on FeOOH nanotubes showed excellent performances toward high current density oxygen evolution reaction (OER) in alkaline and simulated seawater solutions, hybrid supercapacitor (HSC), and aqueous battery due to the well-controlled electronic and geometric structures. The optimal FeOOH/(Ni1Co1)MoO4 required overpotentials of 225 and 546 mV to deliver 10 and 1000 mA cm-2 current densities toward alkaline OER, and maintained a good stability for 100 h at 200 mA cm-2 with negligible attenuation. The FeOOH/(Ni1Co1)MoO4//Pt/C electrolyzer exhibited a low cell voltage of 1.52 and 1.79 V to drive 10 and 200 mA cm-2 and retained a long-term durability nearly 100 h at 1.79 V. As the electrode of energy storage devices, it possessed a specific capacity of 342 mA h g-1 at 1 A g-1. HSC and SC-type battery devices were fabricated. The assembled HSC kept a capacitance retention of 94 % after 10,000 cycles. This work provided a way to fabricate effective and stable multifunctional materials for energy storage and conversion with the aid of multi-method calculations.

Surface interactions of C and C(3) polyols with γ-Al2O3 and the role of coadsorbed water.

The formation of surface species from two- and three-carbon polyols on γ-Al(2)O(3) in the presence and absence of coadsorbed water is investigated. Aqueous-phase adsorption isotherms indicate that competitive adsorption between water and polyol inhibits the uptake of the polyol molecules on γ-Al(2)O(3) and that the polyol with the most hydroxyl groups, glycerol, experienced the greatest uptake. Deuterium solid echo pulse NMR measurements support the fact that glycerol strongly interacts with γ-Al(2)O(3) in the presence of physisorbed water and that ethylene glycol interacts with γ-Al(2)O(3) only after the physisorbed water has been removed. In situ high-vacuum FT-IR analysis combined with DFT simulations demonstrate that glycerol readily forms a multidentate alkoxy species through its primary hydroxyl groups with coordinatively unsaturated Al atoms of γ-Al(2)O(3) in the presence of physisorbed water. This surface species exhibits a bridging alkoxy bond from one of its primary hydroxyl groups and a strong interaction with the remaining primary hydroxyl group. FT-IR analysis of 1,3-propanediol on γ-Al(2)O(3) also demonstrates the formation of a multidentate alkoxy species in the presence of coadsorbed water. In contrast, polyols with hydroxyl groups only on the one- and two-carbon atoms, ethylene glycol, and 1,2-propanediol do not form alkoxy bonds with the γ-Al(2)O(3) surface when coadsorbed water is present. These polyols will form alkoxy bonds to γ-Al(2)O(3) when coadsorbed water is removed, and these alkoxy species are removed when water is readsorbed on the sample. The formation of strongly bound, stable multidentate alkoxy species by ethylene glycol and 1,2-propanediol on γ-Al(2)O(3) is prevented by steric limitations of vicinal alcohol groups.

The adsorption of single Au atom and nucleation on γ-Al2O3 surfaces.

Single-atom catalysts (SACs) in heterogeneous catalysts have attracted increasing attention and the adsorption and nucleation of single atom on the surface are closely related to the performance of the catalyst. The present work employed density functional theory calculations to examine the adsorption of single Au atom and nucleation on γ-Al2O3 surfaces at the atomic level. The effect of surface hydroxyls group on the adsorption and nucleation of single Au atom on γ-Al2O3 surfaces is explored. It was found that the spillover reactions of surface hydroxyls H atoms with the deposited Au- are not available on the hydroxylated surface. The interaction of Au to the clean surface is the stronger than to the hydroxylated surface. The even-odd alternations of Aux and weak binding of single Au atoms to γ-Al2O3 leads to large even-numbered Au cluster on the surface. Density of states and electron density difference analysis show that the electronic structure of Au/γ-Al2O3 is quite different from the reported Cu and Pd on Al2O3.

Bio-inspired design of NiFeP nanoparticles embedded in (N,P) co-doped carbon for boosting overall water splitting.

The design and synthesis of cost-effective and stable bifunctional electrocatalysts for water splitting via a green and sustainable fabrication way remain a challenging problem. Herein, a bio-inspired method was used to synthesize NiFeP nanoparticles embedded in (N,P) co-doped carbon with the added carbon nanotubes. The obtained Ni0.8Fe0.2P-C catalyst displayed excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performances in both alkaline and alkaline simulated seawater solutions. The optimal Ni0.8Fe0.2P-C/NF only needs overpotentials of 45 and 242 mV to reach the current density of 10 mA cm-2 under HER and OER working conditions in 1.0 M KOH solution, respectively. First-principles calculations revealed the presence of a strong interaction between the carbon layer and metal phosphide nanoparticles. Benefiting from this and carbon nanotubes modification, the fabricated Ni0.8Fe0.2P-C presents impressive stability, working continuously for 100 h without collapse. A low alkaline cell voltage of 1.56 V for the assembled Ni0.8Fe0.2P-C/NF//Ni0.8Fe0.2P-C/NF electrocatalyzer could afford a current density of 10 mA cm-2. Moreover, when integrated with a photovoltaic device, the bifunctional Ni0.8Fe0.2P-C electrocatalyst demonstrates application potential for sustainable solar-driven water electrolysis.

S-Species-Evoked High-Valence Ni2+ δ of the Evolved ß-Ni(OH)2 Electrode for Selective Oxidation of 5-Hydroxymethylfurfural.

An efficient NiSx -modified ß-Ni(OH)2 electrode is reported for the selective oxidation reaction of 5-hydroxymethylfurfural (HMFOR) with excellent electrocatalytic 5-hydroxymethylfurfural (HMF) selectivity (99.4%), conversion (97.7%), and Faradaic efficiency (98.3%). The decoration of NiSx will evoke high-valence Ni2+ δ species in the reconstructed ß-Ni(OH)2 electrode, which are the real active species for HMFOR. The generated NiSx /Ni(OH)O modulates the proton-coupled electron-transfer (PCET) process of HMFOR, where the electrocatalytically generated Ni(OH)O can effectively trap the protons from the CHO end in HMF to realize electron transfer. The oxygen evolution reaction (OER) competes with the HMFOR when NiSx /Ni(OH)O continues to accumulate, to generate the NiSx /NiOx (OH)y intermediate. Density functional theory (DFT) calculations and experimental results verify that the adsorption energy of HMF can be optimized through the increased NiSx composition for more efficient capture of protons and electrons in the HMFOR.

The surface structure, stability, and catalytic performances toward O2 reduction of CoP and FeCoP2.

The systematic atomistic level investigation of low-index surface structures, stabilities, and catalytic performances of CoP and FeCoP2 towards the O2 reduction reaction (ORR) is vital for their applications. Employing first-principles calculations, it is revealed that CoP and FeCoP2 present the same surface stability in the order of (101) ≈ (011) > (111) > (001) > (110) > (010) > (100). They also possess a similar Wulff equilibrium crystal shape with (101) and (011) exposing the largest surface area. From the electronic view, FeCoP2 presents improved electronic conductivity compared with CoP. From the energy view, whether FeCoP2 delivers improved electrocatalytic activity toward the ORR with respect to CoP depends on the reactive surfaces and sites. Among the 4 surfaces considered, only CoP(101), FeCoP2(101) and FeCoP2(011) delivered ORR performances theoretically when the bridge metal-metal site acts as the reactive center, which makes CoP(011) the only exception. CoP(101)-bCo-Co and FeCoP2(011)-bFe-Co exhibit a larger thermodynamic limiting potential than FeCoP2(101)-bCo-Co, suggesting their higher performances toward the ORR. The last step of HO* desorption as the rate-limiting step accounts for 3/4. The third step of transformation from O* to HO* as the most sluggish step accounts for 1/4. The work function, d-band center, Bader charge, and electronic localization function calculations are performed to reveal the HO adsorption nature. The present work provides fundamental insight into the effect of Fe doping into CoP, the determination of the catalyst surface and the key species adsorption nature to guide the rational design of high-performance materials.

Rational design of 3D N-doped graphene with a holey structure as a bifunctional electrode for sensitive methyl parathion detection and supercapacitors.

N-doped graphene with nano-sized holes possesses abundant electrochemically active sites at the exposed edge and an open porous structure, leading to a better electrochemical performance and faster electron and ion transport than the basal planes in graphene. In this study, three-dimensional graphene with a porous structure and abundant doped N (3d-NHG) were synthesized as bifunctional electrodes for methyl parathion (MP) detection and supercapacitors. The roles of N-doping and the holey construction in the electrochemical performance of the 3d-NHG were systematically investigated through a combined theory-experiment strategy. The 3d-NHG-based electrochemical sensor successfully detected methyl parathion in the range of 38 nm-380 µM with a low detection limit (2.27 nM) and superior sensitivity. Furthermore, the 3d-NHG also demonstrated potential for use in supercapacitors with a specific capacitance of 207 F g-1 at 1 A g-1 and excellent rate capability (76% capacitance retention at 10 A g-1). Density functional theory calculations revealed that the exposed carbon sites at the edge are the reactive sites for species adsorption. Moreover, the holey structure in 3d-NHG plays a dominating role in electrochemical processes and in the enhanced electrocatalysis. This work provides guidance for the rational design of high-performance bifunctional electrodes for MP detection and supercapacitors by defect engineering.

Carbon-incorporated bimetallic phosphide nanospheres derived from MOFs as superior electrocatalysts for hydrogen evolution.

Preparing low-cost and highly efficient electrocatalysts for the hydrogen evolution reaction using a simple strategy still faces challenges. In this work, we proposed a facile phosphating process to successfully transform CoFe-BTC (BTC = 1,3,5-benzenetricarboxylate) precursors into carbon-incorporated bimetallic phosphide (CoFe-P/C) nanospheres. Due to the synergistic effect between bimetals and uniformly covered carbon shells outside, the as-synthesized porous bimetallic phosphide nanospheres exhibit superior HER activity, enhanced kinetics, and excellent cycle durability in both acidic and alkaline solutions. The optimized material could afford a current density of 10 mA cm-2 with overpotentials of 138 and 193 mV for the HER in acidic and alkaline solutions, respectively. Meanwhile, it delivered small Tafel slopes of 84 and 78 mV dec-1 for the HER in 0.5 M H2SO4 and 1.0 M KOH, respectively. Moreover, an assembled alkaline electrolyzer enabled a low voltage of 1.62 V to drive a current density of 10 mA cm-2 for overall water splitting. DFT calculations indicate that the CoP-Fe2P composite is supposed to exhibit better HER performance than each component, revealing the vital role of the interfacial site in catalyzing the HER.

Oxygen-deficient metal oxides supported nano-intermetallic InNi3C0.5 toward efficient CO2 hydrogenation to methanol.

Direct CO2 hydrogenation to methanol using renewable energy-generated hydrogen is attracting intensive attention, but qualifying catalysts represents a grand challenge. Pure-/multi-metallic systems used for this task usually have low catalytic activity. Here, we tailored a highly active and selective InNi3C0.5/ZrO2 catalyst by tuning the performance-relevant electronic metal-support interaction (EMSI), which is tightly linked with the ZrO2 type-dependent oxygen deficiency. Highly oxygen-deficient monoclinic-ZrO2 support imparts high electron density to InNi3C0.5 because of the considerably enhanced EMSI, thereby enabling InNi3C0.5/monoclinic-ZrO2 with an intrinsic activity three or two times as high as that of InNi3C0.5/amorphous-ZrO2 or InNi3C0.5/tetragonal-ZrO2 The EMSI-governed catalysis observed in the InNi3C0.5/ZrO2 system is extendable to other oxygen-deficient metal oxides, in particular InNi3C0.5/Fe3O4, achieving 25.7% CO2 conversion with 90.2% methanol selectivity at 325°C, 6.0 MPa, 36,000 ml gcat -1 hour-1, and H2/CO2 = 10:1. This affordable catalyst is stable for at least 500 hours and is also highly resistant to sulfur poisoning.

A Zeolitic-Imidazole Framework-Derived Trifunctional Electrocatalyst for Hydrazine Fuel Cells.

Hydrazine fuel cells are promising sustainable power sources. However, the high price and limited reserves of noble metal catalysts that promote the sluggish cathodic and anodic electrochemical reactions hinder their practical applications. Reflecting the enhanced diffusion and improved kinetics of nanostructured non-noble metal electrocatalysts, we report an efficient zeolitic-imidazole framework-derived trifunctional electrocatalyst for hydrazine oxidation, oxygen, and hydrogen peroxide reduction. Experimental results and theoretical calculations corroborate that the nanocarbon architecture with abundant Co-N species enhances the electronic interaction and optimizes the energy barriers of anodic hydrazine oxidation and cathodic oxygen reduction. The resulting assembled hydrazine-oxygen fuel cell yields a cell voltage and power density of 0.74 V and 20.5 mW cm-2, respectively. Moreover, benefiting from the liquid-liquid diffusion, the hydrazine-hydrogen peroxide cell shows a boosted cell voltage and power density, corresponding to 1.68 V and 41.0 mW cm-2. This work offers a highly active non-noble metal multifunctional electrocatalyst with a pioneering diffusion philosophy in the liquid electrochemical cells.

Single-metal-atom catalysts supported on graphdiyne catalyze CO oxidation.

Single-metal-atom catalysts supported on graphdiyne (GDY) exhibit great potential for catalyzing low temperature CO oxidation in solving the increasingly serious environmental problems caused by CO emissions due to the high catalytic activity, clear structure, uniform metal distribution and low cost. First principle calculations were employed to study CO oxidation activities of four M@GDY single-atom catalysts (M = Pt, Rh, Cu, and Ni). For each catalyst, five possible reaction mechanisms including bi-molecular and tri-molecular reactions were discussed. According to the calculated reaction barriers, the preferred reaction pathway is via the bi-molecular Langmuir-Hinshelwood (BLH) ((CO + O2)* → OCOO* → CO2 + O*) route to yield the first CO2 molecule with 0.55, 0.51, and 0.53 eV as the energy barriers of the rate-limiting steps of Pt@GDY, Rh@GDY, and Cu@GDY, respectively, whereas for Ni@GDY, it switches to the tri-molecular Eley-Rideal (TER1) ((2CO)* + O2→ OCOOCO* → 2CO2) mechanism with the reaction barrier of the rate-limiting step being 1.27 eV. Based on the energy difference in the initial states of the five reaction mechanisms, TER1 is generally viable. No matter it is based on the calculated reaction barrier or the energy of the initial state of each mechanism, the non-noble Cu@GDY is supposed to be an efficient catalyst as the noble ones. The electronic properties are calculated to explain the bonding strength and origin of the catalytic performance. The GDY support plays an important role in the electron transfer process.

FeCoP2 Nanoparticles Embedded in N and P Co-doped Hierarchically Porous Carbon for Efficient Electrocatalytic Water Splitting.

The design and synthesis of low-cost and efficient bifunctional electrocatalysts for water splitting are critical and challenging. Hereby, a bimetallic phosphide embedded in a N and P co-doped porous carbon (FeCoP2@NPPC) material was synthesized by using sustainable biomass-derived N- and P-containing carbohydrates and non-noble metal salts as precursors. The obtained material exhibits good catalytic activities in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. The bimetallic alloy phosphide (FeCoP2) is the active site for electrocatalysis. Theoretical calculation indicates that the sub-layer Fe atoms and top-layer Co atoms in FeCoP2 exhibit a synergistic effect for enhanced electrocatalytic performance. The carbon matrix around the FeCoP2 can prevent the corrosion during the catalytic reactions. The hierarchically porous structure of the FeCoP2@NPPC material can promote the transfer of electrons and electrolyte, and increase the contact area of the active sites and electrolytes. N- and P-containing functionalities improve the wetting and conductivity properties of the porous carbon. Due to the synergistic effects, FeCoP2@NPPC requires a low overpotential of 114 and 150 mV at the current density of 10 mA cm-2 for HER in 0.5 M H2SO4 and 1.0 M KOH, and an overpotential of 236 mV for OER in 1.0 M KOH solution, which are much lower than those of FeP@NPPC and CoP@NPPC. Based on the density functional theory calculation, FeCoP2 yields the smallest Gibbs free energy change of rate-determining step among the samples, which leads to better electrochemical performances. In addition, when FeCoP2@NPPC was used as a bifunctional catalyst in water splitting, the electrolyzer needed a low voltage of 1.60 V to deliver the current density of 10 mA cm-2. Furthermore, this work provides a strategy for preparing sustainable, stable, and highly active electrocatalysts for water splitting.

The Application of Metal-Organic Frameworks and Their Derivatives for Supercapacitors.

Supercapacitors (SCs), one of the most popular types of energy-storage devices, present lots of advantages, such as large power density and fast charge/discharge capability. Being the promising SCs electrode materials, metal-organic frameworks (MOFs) and their derivatives have gained ever-increasing attention due to their large specific surface area, controllable porous structure and rich diversity. Herein, the recent development of MOFs-based materials and their application in SCs as the electrode are reviewed and summarized. The preparation method, the morphology of the materials and the electrical performance of various MOFs and their derivatives (such as carbon, metal oxide/hydroxide and metal sulfide) are briefly discussed. Most of recent works concentrate on Ni-, Co- and Mn-MOFs and their composites/derivatives. Conclusions and our outlook for the researches are also given, which would be a valuable guideline for the rational design of MOFs materials for SCs in the near future.

Impact of linker functionalization on the adsorption of nitrogen-containing compounds in HKUST-1.

Functionalization of metal-organic framework (MOF) ligands can tune the adsorption properties of MOFs. The adsorptions of NO, NO2, NH3, C5H5N, C4H5N, and C4H4O on pristine and five X-functionalized HKUST-1, i.e. Cu3(BTC)2 (BTC = 1,3,5-benzenetricarboxylate) (X = CH3, CH3O, NH2, NO2, and Br) are evaluated by van der Waals corrected density functional theory calculations. Despite the fact that the open metal center is the energetically preferred adsorption site for most of them, the functional group site can yield a comparable adsorption ability with the open metal center. This is particularly true for pyrrole C4H5N adsorption on CH3O-functionalized HKUST-1 where the functional group site shows stronger adsorption stability than the open metal center site, probably due to the formed hydrogen bond between pyrrole and the CH3O functional group. While the CH3- or CH3O-functionalized organic linker in these MOFs strengthens the adsorption of all the considered species, that of NO2-, Br-, or NH2-functional groups reduces, which is associated with their topologies. Among them, only CH3- or CH3O-functionalized HKUST-1 presents the fmj (orthorhombic crystal system) topology while all the others are isostructural to the pristine HKUST-1 with the tbo (twisted boracite-type, cubic) topological structure. Among six adsorbates, two basic adsorbates, C5H5N and NH3, always yield the strongest bonding strength upon adsorption on the pristine and five functionalized HKUST-1. Electronic properties including the Bader charges, electron density differences, and electron localization function were investigated to comprehend their adsorption behaviors. This work provides guidance for the proper functionalization of HKUST-1 with improved adsorption properties for specific adsorbates.

Atomic structures and electronic properties of Ni or N modified Cu/diamond interface.

The interfacial stability of copper/diamond directly affects its mechanical properties and thermal conductivity. The atomic structures and electronic properties of Cu/diamond and Cu/X/diamond interfaces have been identified to investigate the effect of interfacial additive X (X = Ni or N) on the low-index interfacial adhesion of copper/diamond composites. For unmodified composites, the interfacial stability decreases in the order of Cu(0 0 1)/diamond(0 0 1) > Cu(1 1 1)/diamond(1 1 1) > Cu(0 1 1)/diamond(0 1 1). The metallic interfacial additive Ni is found to enhance the Cu(0 1 1)/diamond(0 1 1) interfacial stability and exchange the interfacial stability sequence of (0 1 1) and (1 1 1) composites. The nonmetallic element N will promote the stability of Cu(1 1 1)/diamond(1 1 1) but not alter the stability order of the composites at different interfaces. To explain the origin of interfacial stability, a series of analyses on atomic structures and electronic properties have been carried out, including the identification of the type of formed interfacial boundaries, the measurement of interfacial bond lengths, and the calculations of density of states, bond populations, and atomic charge. The stability of the interface is found to be related to the type of formed interfacial boundary and bond, the interfacial bond populations, and the interfacial bond numbers. The layer-projected density of states reveals that all of the considered interfaces exhibit metal characteristics. The interfacial Ni additive is found to be an electron donor contributing the electrons to its bonded Cu and C atoms while the interfacial N atom is an electron acceptor where it mainly accepts the electrons from its bonded Cu and C.