Bonding wood with uncondensed lignins as adhesives.

Plywood is widely used in construction, such as for flooring and interior walls, as well as in the manufacture of household items such as furniture and cabinets. Such items are made of wood veneers that are bonded together with adhesives such as urea-formaldehyde and phenol-formaldehyde resins1,2. Researchers in academia and industry have long aimed to synthesize lignin-phenol-formaldehyde resin adhesives using biomass-derived lignin, a phenolic polymer that can be used to substitute the petroleum-derived phenol3-6. However, lignin-phenol-formaldehyde resin adhesives are less attractive to plywood manufacturers than urea-formaldehyde and phenol-formaldehyde resins owing to their appearance and cost. Here we report a simple and practical strategy for preparing lignin-based wood adhesives from lignocellulosic biomass. Our strategy involves separation of uncondensed or slightly condensed lignins from biomass followed by direct application of a suspension of the lignin and water as an adhesive on wood veneers. Plywood products with superior performances could be prepared with such lignin adhesives at a wide range of hot-pressing temperatures, enabling the use of these adhesives as promising alternatives to traditional wood adhesives in different market segments. Mechanistic studies indicate that the adhesion mechanism of such lignin adhesives may involve softening of lignin by water, filling of vessels with softened lignin and crosslinking of lignins in adhesives with those in the cell wall.

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting.

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC's thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K-1, an ionic conductivity of 108.5 mS cm-1, and a high specific output power density of 1760 µW m-2 K-2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy.

Nanomechanics of Lignin-Cellulase Interactions in Aqueous Solutions.

Efficient enzymatic hydrolysis of cellulose in lignocellulose to glucose is one of the most critical steps for the production of biofuels. The nonproductive adsorption of lignin to expensive cellulase highly impedes the development of biorefinery. Understanding the lignin-cellulase interaction mechanism serves as a vital basis for reducing such nonproductive adsorption in their practical applications. Yet, limited report is available on the direct characterization of the lignin-cellulase interactions. Herein, for the first time, the nanomechanics of the biomacromolecules including lignin, cellulase, and cellulose were systematically investigated by using a surface force apparatus (SFA) at the nanoscale in aqueous solutions. Interestingly, a cation-π interaction was discovered and demonstrated between lignin and cellulase molecules through SFA measurements with the addition of different cations (Na+, K+, etc.). The complementary adsorption tests and theoretical calculations further confirmed the validity of the force measurement results. This finding further inspired the investigation of the interaction between lignin and other noncatalytic-hydrolysis protein (i.e., soy protein). Soy protein was demonstrated as an effective, biocompatible, and inexpensive lignin-blocker based on the molecular force measurements through the combined effects of electrostatic, cation-π, and hydrophobic interactions, which significantly improved the enzymatic hydrolysis efficiencies of cellulose in pretreated lignocellulosic substrates. Our results offer quantitative information on the fundamental understanding of the lignin-cellulase interaction mechanism. Such unraveled nanomechanics provides new insights into the development of advanced biotechnologies for addressing the nonproductive adsorption of lignin to cellulase, with great implications on improving the economics of lignocellulosic biorefinery.

Preliminary and Comparative Experiment Study Between 18F-Flurpiridaz and 13N-NH3·H2O Myocardial Perfusion Imaging With PET/CT in Miniature Pigs.

OBJECTVES: To comparatively explore the differences between 18F-Flurpiridaz and 13N-NH3·H2O PET/CT myocardial perfusion imaging in miniature pigs. METHODS: Ten Bama minipigs were divided into normal group and myocardial infarction group. The changes of the ratio of left ventricular myocardium to main organs with time were calculated and the best imaging time was confirmed for 18F-Flurpiridaz imaging in normal group. The image quality score, summed rest score(SRS), Extend, total perfusion deficit(TPD) and left ventricle ejection fraction(LVEF) were respectively compared for 18F-Flurpiridaz and 13N-NH3·H2O in infarction group. RESULTS: 18F-Flurpiridaz was rapid distributed in myocardium, and the background counts of cardiac cavity were very low, and no obvious interference extracardiac radioactivity was observed. The radioactive ratio of the left ventricular myocardium to cardiac blood pool and adjacent liver were high. Compared with 13N-NH3·H2O, there were no significant differences in functional parameters, including SRS, Extend, TPD and LVEF. CONCLUSION: The results preliminaryly show that 18F-FIurpiridaz is a promising positron MPI agent with good image quality, ability of accurately evaluating cardiac function, and also convenience for application.

Protection Strategies Enable Selective Conversion of Biomass.

Selective and economic conversion of lignocellulosic biomass components to bio-based fuels and chemicals is the major goal of biorefineries, but low yields and selectivity for fuel precursors such as sugars, furanics, and lignin-derived monomers pose significant disadvantages in process economics. In this Minireview we summarize the existing protection strategies used in biomass chemocatalytic conversion processes and focus the discussions on the mechanisms, challenges, and opportunities of each strategy. We introduce a concept of using analogous methods to manipulate biomass catalytic conversion pathways during the upgrading of carbohydrates to fuels and chemicals. This Minireview may provide new insights into the development of selective biorefining processes from a different perspective, expanding the options for selective conversion of biomass to fuels and chemicals.

Iron-Catalyzed, Iminyl Radical-Triggered Cascade 1,5-Hydrogen Atom Transfer/(5+2) or (5+1) Annulation: Oxime as a Five-Atom Assembling Unit.

By integration of iminyl radical-triggered 1,5-hydrogen atom transfer and (5+2) or (5+1) annulation processes, a series of structurally novel and interesting azepine and spiro-tetrahydropyridine derivatives have been successfully prepared in moderate to good yields. This method utilizes FeCl2 as the catalyst and readily available oximes as five-atom units, while showcasing broad substrate scope and good functional group compatibility. The annulation products can be easily converted into many valuable compounds. Moreover, DFT calculation studies are performed to provide some insights into the possible reaction mechanisms for the (5+2) and (5+1) annulations.

Enantioselective [4 + 1] Annulation Reactions of α-Substituted Ammonium Ylides To Construct Spirocyclic Oxindoles.

Ammonium ylides have a long history in organic synthesis, but their application in asymmetric catalysis is still underdeveloped in regard to both substrate scope and reaction pathways compared with phosphorus and sulfur ylides. Here a previously unreported asymmetric [4 + 1] annulation reaction of 3-bromooxindoles and electron-deficient 1-azadienes has been developed through ammonium ylide catalysis of a newly designed 2'-methyl α-isocupreine (α-MeIC), efficiently delivering spirocyclic oxindole compounds incorporating a dihydropyrrole motif in excellent enantioselectivity (up to 99% ee). To the best of our knowledge, this work represents the first example of asymmetric catalysis of ammonium ylides bearing α-substitutions, and the catalytic [4 + 1] annulation pathway of ammonium ylides is also unprecedented. Moreover, (1)H NMR, mass spectroscopy, and computational calculation studies were conducted, and the catalytic cycle and a tentative explanation of the enantioselective mechanism have been successfully elucidated.

Spectroscopic analysis on the interaction of ferulic acid and tetramethylpyrazine with trypsin.

The interaction of trypsin with tetramethylpyrazine (TMP) and ferulic acid (FA) was studied using fluorescence, synchronous fluorescence, UV-vis absorption, circular dichroism (CD) and three-dimensional (3D) fluorescence spectra techniques. Using fluorescence quenching calculations, the bimolecular quenching constant (kq), apparent quenching constant (KSV), effective binding constant (Ka) and binding site number (n) were obtained. The distance r between donor and acceptor was found to be 2.049 and 1.281 nm for TMP-trypsin and FA-trypsin complexes. TMP and FA can quench the fluorescence intensity of trypsin by a static quenching procedure. Thermodynamic parameters calculated on the basis of different temperatures revealed that the binding of trypsin to TMP/FA mainly depended on van der Waals' forces and hydrogen bonds. The effect of TMP and FA on the conformation of trypsin was analyzed using synchronous fluorescence, CD, 3D fluorescence spectra and molecular docking studies.

[1483 cases of paternity test with STR loci mutation].

OBJECTIVE: To observe and analyze the mutation phenomenon of 17 STR loci of PowerPlex 18D Kit in paternity test of Yunnan population. METHODS: The DNA was extracted by Chelex-100 method. The PowerPlex 18D Kit was used to test 1,483 cases and their conclusions of paternity tests were verified. RESULTS: In the 1,483 cases, 1,047 were parental triplet and 436 were uniparental diad. A total of 2,530 times of meiosis was observed. One STR locus mutation was observed in 24 cases. And 11 mutation loci were found in the 17 STR loci. CONCLUSION: STR loci mutation is a common phenomenon. We should collect the data of STR loci mutation, choose other good polymorphism, low mutation rate of genetic markers, to ensure that the results are accurate and reliable.

Hydrothermal Valorization of Biosugars with Heterogeneous Catalysts: Advances, Catalyst Deactivation, Mitigation Strategies and Perspectives.

Sustainable production of valuable biochemicals and biofuels from lignocellulosic biomass necessitates the development of durable and high-performance catalysts. To assist the next stage catalyst design for hydrothermal treatment of biosugars, this paper provides a critical review of (1) recent advances in biosugar hydrothermal valorization using heterogeneous catalysts, (2) the deactivation process of catalysts based on recycling tests of representative biosugar hydrothermal treatments, (3) state-of-the-art understandings of the deactivation mechanisms of heterogeneous catalysts, and (4) strategies of preparing durable catalysts and the regeneration of deactivated catalysts. Based on the review, challenges and perspectives are proposed. Some remarkable achievements in heterogeneous catalysis of biosugars are highlighted. The understanding of catalyst durability needs to be further increased based on full examination of the catalytic performance based on the conversion of substrates, the yield and selectivity of products. Further, a full examination of the physiochemical changes based on multiple characterization techniques is required to illuminate the relationships between treatment variables and catalyst durability. Collectively, a clear understanding of the relationships between chemical reaction pathways, treatment variables and the physiochemistry of catalysts is encouraged to be gained to advise the development of heterogeneous catalysts for long-term and efficient hydrothermal upgrading of biosugars.

Renewable hemicellulose-based materials for value-added applications.

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

Correction: Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis.

Correction for 'Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis' by Zhaoqiang Wang et al., Chem. Commun., 2024, 60, 204-207, https://doi.org/10.1039/D3CC04800D.

Meta-analysis of the efficacy and safety of Ginkgolide Meglumine Injection combined with Butylphthalide in the treatment of Acute Ischemic Stroke.

OBJECTIVE: To evaluate the efficacy and safety of Ginkgolide Meglumine Injection (GMI) combined with Butylphthalide in the treatment of Acute Ischemic Stroke (AIS), and provide reference for rational clinical medication. METHODS: PubMed, Embase, Web of science, CNKI, Wanfang, VIP and other databases were searched for published studies on the treatment of AIS with GMI combined with Butylphthalide in both Chinese and English. The search period was from the establishment of the database to July 2023. The included studies that met the inclusion criteria were analyzed using RevMan 5.3 software for Meta-analysis. RESULTS: A total of 25 studies involving 2362 patients (experimental group = 1182, control group = 1180) were included. The results of meta-analysis showed that the overall effective rate of the experimental group was significantly higher than that of the control group [RR = 1.21, 95% CI (1.16, 1.26), P< 0.00001]. In addition, compared with the control group, the experimental group showed significant improvement in NIHSS score [SMD = -1.59, % CI (-2.00-1.18), P< 0.00001] and ADL score [SMD = 2.12, 95% CI (1.52, -2.72), P<0.00001], significant decrease in CRP [SMD = -2.24, 95% CI (-3.31, -1.18), P<0.0001] and TNF-α [SMD = -2.74, 95% CI (-4.45, -1.03), P< 0.005] levels, and improvement in plasma viscosity [SMD = -0.86, 95% CI (-1.07, -0.66), P< 0.00001]. However, the influence on homocysteine level remains inconclusive. Furthermore, there was no significant difference in the incidence of adverse reactions between the two groups [SMD = 0.95, 95% CI (0.71, 1.28), P> 0.05]. CONCLUSION: GMI combined with Butylphthalide shows good clinical application effects and good safety in the treatment of AIS. However, more large-sample, multicenter, randomized controlled are needed to confirm these findings.

The CBM91 module enhances the activity of ß-xylosidase/α-L-arabinofuranosidase PphXyl43B from Paenibacillus physcomitrellae XB by adopting a unique loop conformation at the top of the active pocket.

Carbohydrate-binding module (CBM) family 91 is a novel module primarily associated with glycoside hydrolase (GH) family 43 enzymes. However, our current understanding of its function remains limited. PphXyl43B is a ß-xylosidase/α-L-arabinofuranosidase bifunctional enzyme from physcomitrellae patens XB belonging to the GH43_11 subfamily and containing CBM91 at its C terminus. To fully elucidate the contributions of the CBM91 module, the truncated proteins consisting only the GH43_11 catalytic module (rPphXyl43B-dCBM91) and only the CBM91 module (rCBM91) of PphXyl43B were constructed, respectively. The result showed that rPphXyl43B-dCBM91 completely lost hydrolysis activity against both p-nitrophenyl-ß-D-xylopyranoside and p-nitrophenyl-α-L-arabinofuranoside; it also exhibited significantly reduced activity towards xylobiose, xylotriose, oat spelt xylan and corncob xylan compared to the control. Thus, the CBM91 module is crucial for the ß-xylosidase/α-L-arabinofuranosidase activities in PphXyl43B. However, rCBM91 did not exhibit any binding capability towards corncob xylan. Structural analysis indicated that CBM91 of PphXyl43B might adopt a loop conformation (residues 496-511: ILSDDYVVQSYGGFFT) to actively contribute to the catalytic pocket formation rather than substrate binding capability. This study provides important insights into understanding the function of CBM91 and can be used as a reference for analyzing the action mechanism of GH43_11 enzymes and their application in biomass energy conversion.

MicroRNA 181a improves proliferation and invasion, suppresses apoptosis of osteosarcoma cell.

MicroRNA 181a (miR-181a) was found dysregulated in a variety of human cancers and significantly associated with clinical outcome of cancer patients. However, the direct role of miR-181a has not yet been characterized in osteosarcoma progression. This study was aimed at investigating the effects of miR-181a on osteosarcoma cell biological behavior. First, the expression of miR-181a in osteosarcoma cell lines (MG63, HOS, SaOS-2, and U2OS) and a human osteoblastic cell line (hFOB1.19) was detected by qRT-PCR. Results showed that miR-181a was overexpressed in osteosarcoma cell lines compared to human osteoblastic cell line (hFOB1.19). To investigate the effects of miR-181a on proliferation, apoptosis, and invasion of osteosarcoma cells, we generated human osteosarcoma MG63 cells in which miR-181a was either overexpressed or depleted. The MG63 cell viability, cycle, apoptosis, and invasive ability were analyzed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide staining, propidium iodide (PI) staining, Annexin V-FITC/PI double staining, and Transwell invasion experiment, respectively. The results showed that MG63 cell viability, proliferation, and invasive abilities were suppressed, and the apoptosis was enhanced in the group with underexpression of miR-181a. The viability, proliferation, and invasive abilities were improved, and the apoptosis was inhibited in the group with overexpression of miR-181a. The results from Western blotting indicated that miR-181a might be associated with the up-regulation of bcl-2 and matrix metalloproteinase 9 and the down-regulation of tissue inhibitor of metalloproteinases-3 and p21 in MG63 cells. Taken together, our results suggested that miR-181a might facilitate proliferation and invasion and suppress apoptosis of osteosarcoma cells, which might be a potential target for the treatment of osteosarcoma.

Lignocelluloses-Based Furan-Acetone Adducts as Wood Adhesives for Plywood Production.

Plywood is made of wood veneers that are bonded with adhesives such as urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins. The plywood made from formaldehyde-based adhesives not only releases formaldehyde but also relies on fossil resources. In this article, we synthesized furan-acetone adducts from lignocellulosic biomass in one pot. The furan-acetone adducts could be directly used as adhesives with the addition of phosphoric acid as a curing catalyst. Particularly, with the addition of 5 wt% diphenylmethane diisocyanate (MDI) as a crosslinking agent, both the wet and dry bonding strength of the plywood prepared from the adhesives could meet the minimum requirement of 0.7 MPa (Chinese National Standard GB/T 9846-2015). The possible adhesion mechanism is that the penetration of furan-acetone adhesives into vessels and cell lumens followed by crosslinking during hot-pressing forms mechanical interlocking at the interface of wood veneers, which provides the main bonding strength of plywood. The findings presented here could provide a new way for the efficient preparation of aldehyde-free green wood adhesives and the value-added utilization of woody biomass.

Catalytic conversion of diformylxylose to furfural in biphasic solvent systems.

Biobased furfural is a sustainable alternative to petrochemical intermediates for bulk chemicals and fuel production. However, existing methods for the conversion of xylose or lignocelluloses in mono-/bi-phasic systems to furfural involve non-selective sugar isolation or lignin condensation, limiting the valorisation of lignocelluloses. Herein, we used diformylxylose (DFX), a xylose derivative that is formed during the lignocellulosic fractionation process with formaldehyde protection, as a substitute for xylose to produce furfural in biphasic systems. Under kinetically optimized conditions, over 76 mol% of DFX could be converted to furfural in water-methyl isobutyl ketone system at a high reaction temperature with a short reaction time. Finally, isolation of xylan in eucalyptus wood as DFX with formaldehyde protection followed by converting DFX in a biphasic system gave a final furfural yield of 52 mol% (on the basis of xylan in wood), which was more than two times of that without formaldehyde. Combined with the value-added utilization of formaldehyde-protected lignin, this study would enable the full and efficient utilization of lignocellulosic biomass components and further improve the economics of the formaldehyde protection fractionation process.

Critical role of hydrogen bonding between microcrystalline cellulose and g-C3N4 enables highly efficient photocatalysis.

Developing a highly efficient photocatalyst for energy and environmental applications is urgently required. Herein, graphitic carbon nitride (CN) coupled with microcrystalline cellulose (MCC) (denoted as MCC-X/CN) shows excellent photocatalytic performance for tetracycline (TC) degradation and H2 evolution. And the optimized MCC-0.05/CN shows an improved TC degradation rate (Kapp = 0.019 min-1) and H2 evolution rate (642.71 µmol g-1 h-1), which are 1.9 and 22 times higher than those of pure CN, respectively. This improvement primarily results from hydrogen bonding (H-bonding) between CN and MCC, which enables excellent charge separation and migration, leading to the outstanding photoelectrochemical properties of MCC-0.05/CN.

Destructive effects on endothelial cells of grafts in cytomegalovirus DNA-positive patients after keratoplasty.

AIM: To investigate corneal graft survival rate and endothelial cell density (ECD) loss after keratoplasty in cytomegalovirus (CMV) positive patients. METHODS: This was a retrospective cohort study. We analyzed the clinical data of patients who underwent viral DNA detection in aqueous humor/corneal tissue collected during keratoplasty from March 2015 to December 2018 at the Peking University Third Hospital, Beijing, China. To further evaluate the effect of CMV on graft survival rate and ECD loss, patients were divided into three groups: 1) CMV DNA positive (CMV+) group; 2) viral DNA negative (virus-) group, comprising virus- group eyes pairwise matched to eyes in the CMV+ group according to ocular comorbidities; 3) control group, comprising virus- group eyes without ocular comorbidities. The follow-up indicators including graft survival rate, ECD, ECD loss, and central corneal thickness (CCT), were analyzed by Tukey honestly significant difference (HSD) test. RESULTS: Each group included 29 cases. The graft survival rate in CMV+ group were lowest among the three groups (P=0.000). No significant difference in donor graft ECD was found among three groups (P=0.54). ECD in the CMV+ group was lower than the virus- group at 12 (P=0.009), and 24mo (P=0.002) after keratoplasties. Furthermore, ECD loss was higher in the CMV+ group than in the virus- group in the middle stage (6-12mo) post-keratoplasty (P=0.017), and significantly higher in the early stage (0-6mo) in the virus- group than in the control group (P=0.000). CONCLUSION: CMV reduces the graft survival rate and exerts persistent detrimental effects on the ECD after keratoplasty. The graft ECD loss associate with CMV infection mainly occurrs in the middle stage (6-12mo postoperatively), while ocular comorbidities mainly affects ECD in the early stage (0-6mo postoperatively).

The hypoglycemic effect of the kelp on diabetes mellitus model induced by alloxan in rats.

Hypoglycemic effects and the use of kelp in diabetes mellitus (DM) model rats induced by alloxan were investigated. Sixty healthy male rats were used to establish DM models by injecting alloxan intraperitoneally. Kelp powder was added to the general forage for the rats. The levels of fasting blood glucose (FBG) were determined by an automatic blood glucose device. Electrochemiluminescence immunoassay was applied to determine the serum levels of insulin. The serum levels of malondialdehyde (MDA) were measured by thiobarbituric acid assay and nitric oxide (NO) by nitrate reductase assay. The activities of superoxide dismutase (SOD) were determined by xanthinoxidase assay and glutathione peroxidase (GSH-Px) by chemical colorimetry. The shape and structure of islet cells were observed with Hematine-Eosin staining, and the expression of superoxide dismutase (SOD) and inducible nitric oxide synthase (iNOS) in islet cells were detected by immunohistochemical assay. The results showed that the serum levels of insulin after treatment with kelp powder increased significantly compared to those in the DM-model group, while the FBG in the medium-high dose treated groups decreased significantly compared to those in the DM-model group (P < 0.05). The levels of MDA and NO in the kelp powder groups were lower than those in the DM-model group, while the activities of SOD and GSH-Px were higher than those in the DM-model group, of which a significant difference existed between the medium-high dose treated groups and the DM-model group (P < 0.05). The shape and structure of islet cells improved with the up-expressing SOD and down-expressing iNOS in the medium-high dose treated groups compared to those in the DM-model group (P < 0.05). There were no significant differences between the medium and high dose treated groups, all above indexes (P > 0.05). It is suggested that kelp might aid recovery of the the islet cell secreting function and reduce the level of FBG by an antioxidant effect.