An Artificial Gut/Absorption Simulator: Understanding the Impact of Absorption on In Vitro Dissolution, Speciation, and Precipitation of Amorphous Solid Dispersions.

Upon dissolution, amorphous solid dispersions (ASDs) of poorly water-soluble compounds can generate supersaturated solutions consisting of bound and free drug species that are in dynamic equilibrium with each other. Only free drug is available for absorption. Drug species bound to bile micelles, polymer excipients, and amorphous and crystalline precipitate can reduce the drug solute's activity to permeate, but they can also serve as reservoirs to replenish free drug in solution lost to absorption. However, with multiple processes of dissolution, absorption, and speciation occurring simultaneously, it may become challenging to understand which processes lead to an increase or decrease in drug solution concentration. Closed, nonsink dissolution testing methods used routinely, in the absence of drug removal, allow only for static equilibrium to exist and obscure the impact of each drug species on absorption. An artificial gut simulator (AGS) introduced recently consists of a hollow fiber-based absorption module and allows mass transfer of the drug from the dissolution media at a physiological rate after tuning the operating parameters. In the present work, ASDs of varying drug loadings were prepared with a BCS-II model compound, ketoconazole (KTZ), and hypromellose acetate succinate (HPMCAS) polymer. Simultaneous dissolution and absorption testing of the ASDs was conducted with the AGS, and simple analytical techniques were utilized to elucidate the impact of bound drug species on absorption. In all cases, a lower amount of crystalline precipitate was formed in the presence of absorption relative to the nonsink dissolution "control". However, formation of HPMCAS-bound drug species and crystalline precipitate significantly reduced KTZ absorption. Moreover, at high drug loading, inclusion of an absorption module was shown to enhance ASD dissolution. The rank ordering of the ASDs with respect to dissolution was significantly different when nonsink dissolution versus AGS was used, and this discrepancy could be mechanistically elucidated by understanding drug dissolution and speciation in the presence of absorption.

Deconvolution of Plasma Pharmacokinetics from Dynamic Heart Imaging Data Obtained by Single Positron Emission Computed Tomography/Computed Tomography Imaging.

Plasma pharmacokinetic (PK) data are required as an input function for graphical analysis of single positron emission computed tomography/computed tomography (SPECT/CT) and positron emission tomography/CT (PET/CT) data to evaluate tissue influx rate of radiotracers. Dynamic heart imaging data are often used as a surrogate of plasma PK. However, accumulation of radiolabel in the heart tissue may cause overprediction of plasma PK. Therefore, we developed a compartmental model, which involves forcing functions to describe intact and degraded radiolabeled proteins in plasma and their accumulation in heart tissue, to deconvolve plasma PK of 125I-amyloid beta 40 (125I-Aß 40) and 125I-insulin from their dynamic heart imaging data. The three-compartment model was shown to adequately describe the plasma concentration-time profile of intact/degraded proteins and the heart radioactivity time data obtained from SPECT/CT imaging for both tracers. The model was successfully applied to deconvolve the plasma PK of both tracers from their naïve datasets of dynamic heart imaging. In agreement with our previous observations made by conventional serial plasma sampling, the deconvolved plasma PK of 125I-Aß 40 and 125I-insulin in young mice exhibited lower area under the curve than aged mice. Further, Patlak plot parameters extracted using deconvolved plasma PK as input function successfully recapitulated age-dependent plasma-to-brain influx kinetics changes. Therefore, the compartment model developed in this study provides a novel approach to deconvolve plasma PK of radiotracers from their noninvasive dynamic heart imaging. This method facilitates the application of preclinical SPECT/PET imaging data to characterize distribution kinetics of tracers where simultaneous plasma sampling is not feasible. SIGNIFICANCE STATEMENT: Knowledge of plasma pharmacokinetics (PK) of a radiotracer is necessary to accurately estimate its plasma-to-brain influx. However, simultaneous plasma sampling during dynamic imaging procedures is not always feasible. In the current study, we developed approaches to deconvolve plasma PK from dynamic heart imaging data of two model radiotracers, 125I-amyloid beta 40 (125I-Aß 40) and 125I-insulin. This novel method is expected to minimize the need for conducting additional plasma PK studies and allow for accurate estimation of the brain influx rate.

Drug-Polymer Miscibility and the Overlap Concentration (C*) as Measured by Rheology: Variation of Polymer Structure.

OBJECTIVES: Amorphous solid dispersions (ASDs), wherein a drug is molecularly dispersed in a polymer, can improve physical stability and oral bioavailability of poorly soluble drugs. Risk of drug crystallization is usually averted using high polymer concentrations. However, we demonstrated recently that the overlap concentration, C*, of polymer in drug melt is the minimum polymer concentration required to maintain drug in the amorphous state following rapid quench. This conclusion was confirmed for several drugs mixed with poly(vinylpyrrolidone) (PVP). Here we assess the solid-state stability of ASDs formulated with a variety of polymers and drugs and at various polymer concentrations (C) and molecular weights (MWs). We further test the hypothesis that degree of drug crystallization decreases with increasing C/C* and vanishes when C>C*, where C* depends on polymer MW and strength of drug-polymer interaction. METHODS: We test our hypothesis with ASDs consisting of ketoconazole admixed with polyacrylic acid, polymethacrylic acid and poly (methacrylic acid-co-ethyl acrylate); and felodipine admixed with PVP and poly (vinylpyrrolidone-co-vinyl acetate). Values of C* for polymers in molten drug are rheologically determined. Crystallization behavior is assessed by measuring enthalpy of fusion, ΔHf  and by X-ray diffraction. RESULTS: We confirm that ΔHf/ΔHf, C = 0 = f(C/C∗), and essentially no crystallization occurs when C>C*. CONCLUSIONS: Our findings will aid researchers in designing or selecting appropriate polymers to inhibit crystallization of poorly soluble drugs. This research also suggests that C* as determined by rheology can be used to compare drug-polymer interactions for similar molecular weight polymers.

Biodegradable Elastomers Enabling Thermoprocessing Below 100 °C.

Biodegradable and biocompatible elastomers are highly desirable for many biomedical applications. Here, we report synthesis and characterization of poly(ε-caprolactone)-co-poly(ß-methyl-δ-valerolactone)-co-poly(ε-caprolactone) (PCL-PßMδVL-PCL) elastomers. These materials have strain to failure values greater than 1000%. Tensile set measurements according to an ASTM standard revealed a 98.24% strain recovery 10 min after the force was removed and complete strain recovery 40 min after the force was removed. The PßMδVL midblock is amorphous with a glass-transition temperature of -51 °C, and PCL end blocks are semicrystalline and have a melting temperature in the range of 52-55 °C. Due to their thermoplastic nature and the low melting temperature, these elastomers can be readily processed by printing, extrusion, or hot-pressing at 60 °C. Lysozyme, a model bioactive agent, was incorporated into a PCL-PßMδVL-PCL elastomer through melt blending in an extruder, and the blend was further hot-pressed into films; both processing steps were performed at 60 °C. No loss of lysozyme bioactivity was observed. PCL-PßMδVL-PCL elastomers are as cytocompatible as tissue culture polystyrene in supporting cell viability and cell growth, and they are degradable in aqueous environments through hydrolysis. The degradable, cytocompatible, elastomeric, and thermoplastic properties of PCL-PßMδVL-PCL polymers collectively render them potentially valuable for many applications in the biomedical field, such as medical devices and tissue engineering scaffolds.

Stabilization of Amorphous Drugs by Polymers: The Role of Overlap Concentration (C*).

Amorphous solid dispersions (ASDs), in which polymers are admixed with a drug, retard or inhibit crystallization of the drug, increasing the drug's apparent solubility and oral bioavailability. To date, there are no guidelines regarding how much polymer should be added to stabilize the amorphous form of the drug. We hypothesized that only drug that is not within a "sphere of influence" of a polymer chain is able to nucleate and form crystals and that the degree of crystallization should depend primarily on the ratio C/C*, where C is the polymer concentration and C* is the overlap concentration. We tested this hypothesis by quenching dispersions of polyvinylpyrrolidone (PVP) dissolved in molten felodipine (FEL) or indomethacin (IMC) at four molecular weights of PVP. For each molecular weight of PVP, C* in the drug (as solvent) was determined by dynamic light scattering and intrinsic viscosity. The enthalpy of fusion (ΔHf), determined by DSC, was used to measure the fraction of drug that crystallized in an ASD. It was found, roughly, that ΔHf/ΔHf,C=0 = f(C/C*) and that no crystallization occurred when C > C*. XRD also showed that crystallization was completely inhibited up to ∼Tg + 75 °C when the polymer concentration was above C*. Our results suggest that stabilization of amorphous drugs can be achieved by incorporating a polymer just above C*, which is much lower than polymer concentrations customarily used in ASDs. This work reveals the importance of C* in selecting polymer concentrations when formulating drugs as ASDs.

Diazepam Prodrug Stabilizes Human Aminopeptidase B during Lyophilization.

Human aminopeptidase B (APB) is a labile enzyme that is being investigated as a biocatalyst for intranasal delivery of prodrug/enzyme combinations. Therefore, the stability of APB is a major concern to ensure a viable drug product. Lyophilization is one technique commonly used to extend shelf life of enzymes. However, the lyophilization process itself can cause conformational changes and aggregation, leading to inactivation of enzymes. In this study, we demonstrate the use of the substrate avizafone (AVF), a prodrug for diazepam, as a stabilizer to minimize inactivation of APB during lyophilization. Permutations of APB samples combined with AVF, trehalose, and/or mannitol were snap-frozen and lyophilized, and subsequently reconstituted to measure the activity of APB. Of the formulation permutations, an APB + AVF + trehalose combination resulted in minimum degradation with 71% retention of activity. This was followed by APB + AVF and APB + trehalose with 60 and 56% retention of activity, respectively. In comparison, APB + mannitol and APB alone retained only 16 and 6.4% activity, respectively. Lyophilizates of the APB + AVF + trehalose formulation were subjected to a 6 month accelerated stability study, at the end of which negligible reduction in activity was observed. These results suggest that colyophilization of an enzyme with its substrate can impart stability on par with the commonly used lyoprotectant, trehalose, but the combination of substrate and trehalose provides a greater stabilizing effect than either additive alone.

Intranasal Coadministration of a Diazepam Prodrug with a Converting Enzyme Results in Rapid Absorption of Diazepam in Rats.

Intranasal administration is an attractive route for systemic delivery of small, lipophilic drugs because they are rapidly absorbed through the nasal mucosa into systemic circulation. However, the low solubility of lipophilic drugs often precludes aqueous nasal spray formulations. A unique approach to circumvent solubility issues involves coadministration of a hydrophilic prodrug with an exogenous converting enzyme. This strategy not only addresses poor solubility but also leads to an increase in the chemical activity gradient driving drug absorption. Herein, we report plasma and brain concentrations in rats following coadministration of a hydrophilic diazepam prodrug, avizafone, with the converting enzyme human aminopeptidase B Single doses of avizafone equivalent to diazepam at 0.500, 1.00, and 1.50 mg/kg were administered intranasally, resulting in 77.8% ± 6.0%, 112% ± 10%, and 114% ± 7% bioavailability; maximum plasma concentrations 71.5 ± 9.3, 388 ± 31, and 355 ± 187 ng/ml; and times to peak plasma concentration 5, 8, and 5 minutes for each dose level, respectively. Both diazepam and a transient intermediate were absorbed. Enzyme kinetics incorporated into a physiologically based pharmacokinetic model enabled estimation of the first-order absorption rate constants: 0.0689 ± 0.0080 minutes-1 for diazepam and 0.122 ± 0.022 minutes-1 for the intermediate. Our results demonstrate that diazepam, which is practically insoluble, can be delivered intranasally with rapid and complete absorption by coadministering avizafone with aminopeptidase B. Furthermore, even faster rates of absorption might be attained simply by increasing the enzyme concentration, potentially supplanting intravenous diazepam or lorazepam or intramuscular midazolam in the treatment of seizure emergencies.

Colloidal stability versus self-assembly of nanoparticles controlled by coiled-coil protein interactions.

Orientational discrimination of biomolecular recognition is exploited here as a molecular engineering tool to regulate nanoparticle self-assembly or stability. Nanoparticles are conjugated with the heterodimerizing coiled-coils, A and B, which associate in parallel orientation. Simply flipping the orientation of one coiled-coil results in either self-assembling or colloidally stable nanoparticles.

Rescue therapies for seizure emergencies: New modes of administration.

A subgroup of patients with drug-resistant epilepsy have seizure clusters, which are a part of the continuum of seizure emergencies that includes prolonged episodes and status epilepticus. When the patient or caregiver can identify the beginning of a cluster, the condition is amenable to certain treatments, an approach known as rescue therapy. Intravenous drug administration offers the fastest onset of action, but this route is usually not an option because most seizure clusters occur outside of a medical facility. Alternate routes of administration have been used or are proposed including rectal, buccal, intrapulmonary, subcutaneous, intramuscular, and intranasal. The objective of this narrative review is to describe the (1) anatomical, physiologic, and drug physicochemical properties that need to be considered when developing therapies for seizure emergencies and (2) products currently in development. New therapies must consider parameters of Fick's law such as absorptive surface area, blood flow, membrane thickness, and lipid solubility, because these factors affect both rate and extend of absorption. For example, the lung has a 50 000-fold greater absorptive surface area than that associated with a subcutaneous injection. Lipid solubility is a physicochemical property that influences the absorption rate of small molecule drugs. Among drugs currently used or under development for rescue therapy, allopregnanolone has the greatest lipid solubility at physiologic pH, followed by propofol, midazolam, diazepam, lorazepam, alprazolam, and brivaracetam. However, greater lipid solubility correlates with lower water solubility, complicating formulation of rescue therapies. One approach to overcoming poor aqueous solubility involves the use of a water-soluble prodrug coadministered with a converting enzyme, which is being explored for the intranasal delivery of diazepam. With advances in seizure prediction technology and the development of drug delivery systems that provide rapid onset of effect, rescue therapies may prevent the occurrence of seizures, thus greatly improving the management of epilepsy.

Water-soluble benzodiazepine prodrug/enzyme combinations for intranasal rescue therapies.

Benzodiazepines (BZDs), including diazepam (DZP) and midazolam (MDZ), are drugs of choice for rapid treatment of seizure emergencies. Current approved use of these drugs involves administration via either intravenous or rectal routes. The former requires trained medical personnel, while the latter is socially unacceptable for many patients and caregivers. In recent years, efforts have been made to formulate BZDs for nasal administration. Because of the low solubility of these molecules, organic vehicles have been used to solubilize the drugs in the nasal products under development. However, organic solvents are irritating, potentially resulting in injury to nasal tissue. Here we report preliminary studies supporting a strategy in which water-soluble BZD prodrugs and a suitable converting enzyme are coadministered in an aqueous vehicle. Diazepam and midazolam prodrugs were synthesized and were readily converted to their active forms by a protease from Aspergillus oryzae. Using a permeation assay based on monolayers of Madin-Darby canine kidney II-wild type cells, we found that enzymatically produced BZDs could be maintained at high degrees of supersaturation, enabling faster transport across the membrane than can be achieved using saturated solutions. This strategy not only obviates the need for organic solvents, but it also suggests more rapid absorption and earlier peak concentrations than can be otherwise achieved. This article is part of a Special Issue entitled "Status Epilepticus".

Delaying the First Nucleation Event of Amorphous Solid Dispersions Above the Polymer Overlap Concentration (c*): PVP and PVPVA in Posaconazole.

A thorough understanding of effects of polymers on crystallization of amorphous drugs is essential for rational design of robust amorphous solid dispersion (ASD), since crystallization of the amorphous drug negates their solubility advantage. In this work, we measured the first nucleation time (t0, time to form the first critical nucleus in fresh liquid/glass) in posaconazole (POS)/polyvinylpyrrolidone vinyl acetate (PVPVA) and POS/polyvinylpyrrolidone (PVP K25) ASDs and showed that the polymer overlap concentration (c*, concentration above which adjacent polymer chains begin to contact) is critical in controlling crystallization of ASDs. When polymer concentration c < c*, t0 of POS ASDs is approximately equal to that of the neat amorphous POS, but it increases significantly when c > c*. This observation supports the view that the effective inhibitory effect of crystallization in ASDs above c* is primarily correlated with delay in the first nucleation event. Our finding is useful in efficient polymer selection and performance prediction of high drug loaded ASD formulations.

Miscibility of Amorphous Solid Dispersions: A Rheological and Solid-State NMR Spectroscopy Study.

Miscibility is critical in the prediction of stability against crystallization of amorphous solid dispersions (ASDs) in the solid state. However, currently available approaches for its determination are limited by both theoretical and practical considerations. Recently, a rheological approach guided by the polymer overlap concentration (c*) has been proposed for miscibility quantification of ASDs [J. Pharm. Sci., 112 (2023) 204-212] and shown to be useful in predicting both accelerated and long term physical stability in the absence of moisture. However, this approach can only be performed at high temperatures (slightly above the melting temperature, Tm, of drugs), and little is known about the difference in miscibility between high and low temperatures (e.g., below the glass transition temperature, Tg). Here we compare the miscibility of nifedipine (NIF)/polyvinylpyrrolidone (PVP) ASDs as determined by the rheological approach at 175°C (∼3°C above Tm of NIF) and solid state NMR (ssNMR) 1H T1 and T1ρ relaxation times at -20°C (∼66°C below Tg of NIF). Our results indicate agreement between the two methods. For low molecular weight (Mw) PVP, T1ρ measurements are more consistent with the rheological approach, while T1 measurements are closer for relatively high Mw PVP. Our findings support the use of the c* based rheological approach for inferring miscibility of deeply cooled ASDs.

Crystallization Inhibition in Molecular Liquids by Polymers above the Overlap Concentration (c*): Delay of the First Nucleation Event.

Low concentration polymer additives can significantly alter crystal growth kinetics of molecular liquids and glasses. However, the effect of polymer concentration on nucleation kinetics remains poorly understood. Based on an experimentally determined first nucleation time (time to form the first critical nucleus, t0), we show that the polymer overlap concentration, c*, where polymer coils in the molecular liquid start to overlap with each other, is a critical polymer concentration for efficient inhibition of crystallization of a molecular liquid. The value of t0 is approximately equal to that of the neat molecular liquid when the polymer concentration, c, is below c*, but increases significantly when c > c*. This finding is relevant for effective polymer screening and performance prediction of engineered multicomponent amorphous materials, particularly pharmaceutical amorphous solid dispersions.

Prodrug/Enzyme based acceleration of absorption of hydrophobic drugs: an in vitro study.

Poor water solubility of APIs is a key challenge in drug discovery and development as it results in low drug bioavailability upon local or systemic administration. The prodrug approach is commonly utilized to enhance solubility of hydrophobic drugs. However, for accelerated drug absorption, supersaturated solutions need to be employed. In this work, a novel prodrug/enzyme based system was developed wherein prodrug and enzyme are coadministered at the point of absorption (e.g., nasal cavity) to form in situ supersaturated drug solutions for enhanced bioavailability. A combination of fosphenytoin/alkaline phosphatase was used as a model system. Prodrug conversion kinetics were evaluated with various prodrug/enzyme ratios at pH 7.4 and 32 °C. Phenytoin permeation rates were determined at various degrees of supersaturation (S = 0.8-6.1), across confluent Madin Darby canine kidney II-wild type monolayers (a nasal epithelium model), with prodrug and enzyme spiked into the apical chamber. Membrane intactness was confirmed by measuring transepithelial electrical resistance and inulin permeability. Fosphenytoin and phenytoin concentrations were analyzed using HPLC. Results indicated that a supersaturated solution could be formed using such prodrug/enzyme systems. Drug absorption increased proportionately with increasing degrees of supersaturation; this flux was 1.5-6 fold greater than that for the saturated phenytoin solution. The experimental data fitted reasonably well to a two compartment pharmacokinetic (PK) model with first order conversion of prodrug to drug. This prodrug/enzyme system markedly enhances drug transport across the model membrane. Applied in vivo, this strategy could be used to facilitate drug absorption through mucosal membranes when absorption is limited by solubility.

Notes on the Use of Kirchhoff's Laws in Pharmacokinetics.

Recent publications by Benet and coworkers, Korzekwa and Nagar, and Rowland et al. signal disagreement regarding the use of Kirchhoff's laws in combining pharmacokinetic parameters, especially clearances and rate constants. Here, it is pointed out that Kirchhoff's laws as applied to pharmacokinetics simply assert that concentrations are well defined and that molar or mass balances hold. The real issue is how to combine parameters for clearance processes in sequence, which may be reversible, irreversible, or even active in either or both directions. It is also demonstrated that Kirchhoff's laws cannot be used to resolve contradictory results observed in liver transport and clearance. Finally, a simple argument is provided relating nonlinear clearance to apparently anomalous bioavailability observations.

Predetermination of burst times of elastoplastic osmotic capsules.

"Pulsed drug release" for dosing drugs such as vaccines, hormones etc. that require multiple, predetermined release events can be obtained by using capsules that exploit the principle of osmosis to achieve a delayed burst release of their payload. An objective of this study was to precisely determine the lag time before burst which occurs when the hydrostatic pressure developed due to water influx expands the capsule shell to rupture. A novel 'dip coating' technique was used to encapsulate osmotic agent solution or solid within biodegradable poly(lactic acid-co-glycolic) (PLGA) spherical capsule shells. As a prelude to determine the hydrostatic pressure to burst, first, elastoplastic and failure characterization of PLGA was conducted by a novel "beach ball inflation" technique. The lag time before burst of various capsule configurations was predetermined by modeling the rate of water uptake by the capsule core as a function of capsule shell thickness, radius of the sphere, core osmotic pressure, and the membrane's hydraulic permeability and tensile properties. In vitro release was studied with capsules of different configurations to determine their actual time to burst. The time to rupture predetermined from the mathematical model corroborated with the in vitro results and was found to increase with increases in capsule radius and shell thickness and decrease in osmotic pressure. Pulsatile drug delivery can be achieved by using a multitude of these osmotic capsules consolidated in a single system, each programmed to release the drug payload after a pre-determined time lag.

An Artificial Gut/Absorption Simulator: Simultaneous Evaluation of Desupersaturation and Absorption from Ketoconazole Supersaturated Solutions.

For supersaturating formulations of BCS-II compounds, which by definition have high intestinal permeability, a closed USP apparatus does not provide the necessary absorptive conditions during dissolution. To address this, an artificial gut simulator (AGS) has been constructed consisting of a 2.5 mL donor compartment in which a hollow fiber-based absorption module is suspended. Drug from donor diffuses across the hollow fiber membrane to be absorbed by the continuously flowing intraluminal receiver fluid. The membrane surface area and intraluminal fluid flow rate are tuned to obtain the physiologically observed absorption rate constant for a weakly basic, poorly water-soluble model compound, ketoconazole (KTZ). Supersaturated solutions of KTZ were generated in the donor in pH 6.5 phosphate buffer by the pH-shift method in the absence (closed system, control) and presence (open system, biorelevant) of an optimally or suboptimally tuned absorption module. Drug concentrations in the donor and intraluminal fluids were determined by in-line UV spectroscopy. The presence of an absorptive sink reduced the supersaturated solution's crystallization propensity, more so in the case of the optimally tuned AGS. This study demonstrates the significance of simulating absorption of drug at a physiological rate during dissolution studies, especially to predict the performance of formulations of BCS-II drugs.

A Rheological Approach for Predicting Physical Stability of Amorphous Solid Dispersions.

Miscibility is an important indicator of physical stability against crystallization of amorphous solid dispersions (ASDs). Currently available methods for miscibility determination have both theoretical and practical limitations. Here we report a method of miscibility determination based on the overlap concentration, c*, which can be conveniently determined from the viscosity-composition diagram. The determined c* values for ASDs of two model drugs, celecoxib and loratadine, with four different grades of polyvinylpyrrolidone (PVP), were correlated strongly with the physical stability of ASDs. This result suggests potential application of the c* concept in guiding the design of stable high drug loaded ASD formulations. A procedure is provided to facilitate broader adoption of this methodology. The procedure is easy to apply and widely applicable for thermally stable binary drug/polymer combinations.

ABC triblock terpolymers exhibiting both temperature- and pH-sensitive micellar aggregation and gelation in aqueous solution.

Two poly(ethylene-alt-propylene)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide-co-acrylic acid) (PEP-PEO-P(NIPAm-co-AA)) triblock terpolymers were synthesized by a combination of anionic and RAFT polymerizations, followed by acid hydrolysis. Micellar aggregation and gelation behavior in aqueous solutions were studied by dynamic light scattering (DLS) and rheology, respectively. DLS measurements on dilute solutions revealed that the triblock terpolymers form micelles with PEP cores and PEO-P(NIPAm-co-AA) coronae at room temperature and undergo a micelle to micellar aggregate transition upon heating. Rheological measurements showed that micellar aggregation manifests itself as gelation at higher concentrations (~4 wt %). The observed thermoresponsive aggregation and gelation is due to the intermicellar association of P(NIPAm-co-AA) blocks in the coronae above the lower critical solution temperature of the P(NIPAm-co-AA) block. The critical micellar aggregation and gelation temperatures are controlled by the mole fraction and degree of acrylic acid (AA) ionization in the P(NIPAm-co-AA) block, and therefore they can be modulated as functions of both pH and AA content in the polymer.

An Artificial Gut/Absorption Simulator: Description, Modeling, and Validation Using Caffeine.

The purpose of this study was to develop and validate a simultaneous dissolution and absorption testing tool, the "artificial gut simulator" (AGS), for oral drug formulations. The AGS was constructed using hollow fibers and housed in a 3-mL UV spectrophotometric cuvette that provided a large surface area-to-volume ratio to simulate absorption at a physiological rate. A quasi-steady-state model describing absorption was developed and validated using a high aqueous solubility, BCS-I model compound, caffeine. This model was used to optimize the AGS operating parameters to simulate physiological gastric emptying and caffeine absorption, which was further input into a one-compartment pharmacokinetic (PK) model. The in vivo caffeine plasma concentration-time profiles matched those predicted by the PK model with in vitro input from the AGS. This work provides a framework for establishing an in vitro/in vivo correlation with high-permeability, BCS-II supersaturating drug formulations, which will be explored in the future studies.