Three-dimensional quantitative analysis of the bone density of mandibular condyle in dentulous and edentulous jaws: an in vivo study.

Studies have reported that masticatory function and occlusal force are low in edentulous patients, which brings about a change in the density, thickness, and alignment of bony trabeculae. However, studies that have quantitatively measured the differential cortical and medullary bone densities of the mandibular condyle in vivo remain rare. This study determined and compared the cortical and medullary bone density of the mandibular condyle in dentulous and edentulous jaws, using multidetector computed tomography (CT). Forty mandibular condyles with no clinical signs of temporomandibular disorders were investigated in 2 groups with 10 subjects (aged 50-80 yr) in each group (group I: dentulous subjects with maintained occlusion; group II: completely edentulous patients) with multidetector CT. The density of condylar cortical and medullary bone was determined by using bone density analysis algorithms available within the proprietary software. Data were analyzed statistically with the 1-way analysis of variance test (p<0.05). The mean cortical bone density of the right and left condyles of group I was 686.11±102.78 Hounsfield unit (HU) and 775.91±89.62 HU, respectively and that of group II was 531.33±289.73 HU and 648.53±294.39 HU, respectively. The mean medullary bone density of the right and left condyles was maximum in group I subjects (429.69±102.62 HU and 486.62±108.60 HU, respectively) than in group II subjects (214.89±104.37 HU and 205.36±90.91 HU, respectively) with a statistically significant decrease in the mean scores (p<0.001). Within the limitations of this study, it can be concluded that the cortical and medullary densities of the mandibular condyle are more in dentulous than the edentulous jaws.

Evaluation of various treatment modalities in sleep bruxism.

STATEMENT OF PROBLEM: Sleep bruxism (SB) is an oral condition that is associated with tooth wear, orofacial pain, and interference with sleep. The most recommended management technique is the use of an occlusal splint. Although the mandibular advancement device (MAD) has shown good results, few well-designed randomized controlled trials are available with which to compare these treatment options. Therefore, an evaluation of the effect of these 2 appliances on SB is needed. PURPOSE: The purpose of this study was to evaluate the effect of a MAD and a maxillary occlusal splint (MOS) on the sleep quality and SB activity of participants with SB. MATERIAL AND METHODS: In this randomized controlled trial, 28 participants were randomly supplied with either a MAD or MOS. The sleep quality of the participants was evaluated with the Pittsburgh Sleep Quality Index (PSQI) and their SB activity with electromyographic activity of the masseter with polysomnography. These variables were measured at baseline, 1 month, and 3 months. RESULTS: Of 32 participants, 28 had data available for statistical analysis, as 4 participants did not return for follow-up examination. Both the MOS and MAD significantly reduced the PSQI and SB episodes and bursts in participants after 3 months (P<.05). The MAD provided greater reduction in SB episodes per hour after 3 months compared to the MOS. Participants supplied with a MAD reported more discomfort in their feedback form than participants using a MOS. CONCLUSIONS: Both the MAD and MOS provided significantly improved sleep quality and a decrease in SB episodes at 3 months.

Prosthetic guidelines for ocular rehabilitation in patients with phthisis bulbi: a treatment-based classification system.

Prosthetic rehabilitation of phthisis bulbi defects is the only treatment option for cosmetic rehabilitation of patients with such defects. Currently, there is no treatment-based classification for prosthetic rehabilitation of patients with phthisis bulbi. Phthisical ocular defects and/or prosthetic rehabilitation were evaluated in an attempt to establish prosthetic guidelines that could be organized into a classification system. Fifty patients who received rehabilitation for phthisis bulbi were reviewed. Phthisis bulbi defects were divided into 4 classes. All the patients had rehabilitation, depending upon the class to which they were assigned. The aim of this treatment-oriented classification system was to organize and define the complex nature of the restorative decision-making process for patients with phthisis bulbi.

Genes and oral cancer.

Oral cancers have been one of the leading causes of deaths particularly in the developing countries. Prime reason for this high mortality and morbidity is attributed to the delay in diagnosis and prompt treatment. Relentless research in the field of oncology has led to the advent of novel procedures for the early detection of oral cancers. Molecular biology is highly promising in this regard. It is a procedure that detects alterations at a molecular level much before they are seen under a microscope and much before clinical changes occur. Molecular studies serve as the basis by which we will eventually be able not only to augment clinical assessment and classification of oral lesions but also predict malignant potential of oral lesions, thus reducing the incidence and increasing the scope for early diagnosis and treatment of oral cancers. However, making such sophisticated tools available for the common man in developing countries is one of the most important challenges faced today.

A simplified approach for placing the iris disc on a custom made ocular prosthesis: report of four cases.

This case report describes a series of four cases of different age group, in which a simplified approach was applied for positioning the iris disc on a custom made ocular prosthesis. For each of the patient, a pre-fabricated eye was selected; whose iris and pupil closely matched that of the natural eye. This was duplicated for use as a tray in impression procedure. Iris portion of the stock eye was trimmed out and oriented on the cast according to previously transferred pupillary mark. This stock eye-wax pattern combination was tested in the eye socket, modified accordingly and finally cured in transparent heat cured acrylic resin. The technique to fabricate ocular prosthesis in present case reports modifies pre-fabricated eye prosthesis to a custom-made fit and aesthetics. This helped us to overcome the disadvantages of poor fit, inadequate movement and complex painting procedure and technique involved in making a custom-made ocular prosthesis. It can be concluded that close adaptation of the custom-made ocular prosthesis to the tissue bed provides maximum comfort and restores full physiologic function to the accessory organs of the eye.

High performance liquid chromatographic determination of residual monomer released from heat-cured acrylic resin. An in vivo study.

PURPOSE: Heat-polymerized acrylic resins are used in dentistry for complete denture fabrication. Despite the polymerization method, conversion of monomer into polymer is often incomplete with free or unreacted residual monomer remaining in the polymerized resin. The aim of this study was to determine the amount of residual monomeric methyl methacrylate (MMA) leaching in the saliva of patients wearing complete dentures in their postinsertion period. MATERIALS AND METHODS: Thirty edentulous participants as first-time complete denture wearers (age 60 to 65 years) were selected. All the prostheses were fabricated using a similar standard technique with a heat-cured acrylic resin denture base material. Saliva samples were collected at time intervals of 1 hour, 1 day, and 3 days postdenture insertion. Participants were asked to discharge saliva every 30 seconds into a pre-weighed screw-capped container for a 5-minute period. MMA levels were measured using high performance liquid chromatography. Data were analyzed by ANOVA and Tukey-HSD. RESULTS: The maximum concentration of monomer released into saliva peaked 1 day after insertion of the complete dentures. The mean (SD) MMA content was 0.04 ± 0.01 (µg/ml) 1 hour after insertion, and 0.3 ± 0.09 (µg/ml), and 0.05 ± 0.01 (µg/ml) on the first and third days postinsertion, respectively. CONCLUSIONS: Although the released monomeric MMA was not at toxic levels, it could potentially sensitize complete denture patients or elicit an allergic reaction. The risk of the residual material as a primary irritant for a sensitizing reaction could be minimized by immersion of the denture in water for 24 hours before insertion.

A case of cleidocranial dysostosis: dilemma for a prosthodontist.

Cleidocranial dysostosis (CCD) is an uncommon, generalized skeletal disorder characterized by delayed ossification of the skull, aplastic or hypoplastic clavicles, and complex dental abnormalities such as retention of multiple deciduous teeth, impaction or delayed eruption of permanent teeth and presence of supernumerary teeth. This case report describes a 30-year old male patient of CCD with classical findings and the challenges faced in his prosthodontic rehabilitation. Conventional complete dentures following interim complete dentures therapy had to be given as all other treatment modalities were ruled out because of anatomic limitations. Despite the disadvantages of removable dentures the patient adapted admirably to them with significant improvement in self-esteem. Though orthodontic and surgical correction may be the treatment of choice, the need to preserve the alveolar ridge could make fabrication of removable dentures in such patients, a viable option.

Canine tip marker: a simplified tool for measuring intercanine distance.

PURPOSE: Appropriate selection of anterior teeth is considered to be of paramount importance in the success of denture prostheses. This study was undertaken to evaluate the correlation between the intercanthal width and interalar width with intercanine distance, in North Indian male and female patients for predicting the mesiodistal width of the maxillary anterior teeth during tooth selection. MATERIALS AND METHODS: The study was conducted with 100 North Indian patients (50 men, 50 women) ranging in age from 17 to 21 years. A digital caliper with an accuracy of 0.01 mm was used to measure the intercanthal and interalar width. A T-shaped flat metal plate (canine tip marker) was used to mark the intercanine distance, which was then measured with the digital caliper. These measurements were interpreted and subjected to statistical analysis. Student's t-test was applied to test the correlation between intercanthal width and interalar width with intercanine distance. RESULTS: Calculated t-values between intercanine distances with interalar width in both male and female groups were 3.14 and 3.56, respectively, greater than the standard value taken at a 5% level of significance with 48 degree of freedom, showing a higher correlation of interalar width with the intercanine distance. Values obtained between intercanthal width and intercanine distance were lower than the standard value in both groups. CONCLUSIONS: A significant correlation was found between interalar width and intercanine distance in both men and women, suggesting that interalar width can be used as a reliable guide for maxillary anterior teeth selection.

Adhesion of different brands of glass ionomer cements to a ceramometal alloy.

AIMS: The aim of the study was to assess, compare and evaluate the adhesive strength and compressive strength of different brands of glass ionomer cements to a ceramometal alloy. MATERIALS: (A) Glass ionomer cements: GC Fuji II - GC Corporation, Tokyo; Chem Flex - Dentsply DeTrey, Germany; Glass ionomer FX - Shofu-11, Japan; MR dental - MR Dental Suppliers Pvt. Ltd., England; (B) ceramometal alloy - Ugirex III; (C) cold cure acrylic resin; (E) temperature cum humidity control chamber; and (F) Instron universal testing machine. METHODS: Four different types of glass ionomer cements were used in the study. From each type of the glass ionomer cements, 15 specimens were made to evaluate the compressive strength and adhesive strength, respectively. Fifteen specimens were further divided into 3 subgroups each having 5 specimens. For compressive strength, specimens were tested at 2, 4 and 12 hours by using Instron universal testing machine. To evaluate the adhesive strength, specimens were surface treated with diamond bur, silicone carbide bur and sandblasting, and tested under Instron universal testing machine. RESULTS AND CONCLUSIONS: It was concluded from the study that the compressive strength as well as the adhesive bond strength of MR dental glass ionomer cement with a ceramometal alloy was found to be maximum compare to other glass ionomer cements. Sandblasting surface treatment of ceramometal alloy was found to be comparatively more effective for adhesive bond strength between alloy and glass ionomer cement.

A study to correlate various facial landmarks with intercanine distance.

CONTEXT: Ideal interaction of dental and facial beauty proportions highly influences a harmonious facial appearance. Racial anatomical variations have been significantly noted and using these norms during prosthodontic rehabilitation will be greatly helpful in successful treatment outcome. AIM: The present study aims to correlate various facial landmarks (interpupillary distance [IPD], intercanthal width, bizygomatic width [BZW], and interalar width) with intercanine distance (ICaD) in Indian young adults to determine the mesiodistal width of the maxillary anterior teeth in edentulous patients. SETTING AND DESIGN: This is an observational cross-sectional study. MATERIALS AND METHODS: This study was conducted in 500 individuals ranging in age from 18 to 28 years. IPD, intercanthal width, BZW, and interalar width were measured with a digital caliper (accuracy - 0.01 mm). A "T-" shaped flat metal plate called "canine tip marker" was made to mark the tips of the maxillary canines, which were further measured with the digital caliper. The data were summarized in table form and were statistically analyzed. STATISTICAL ANALYSIS USED: Student's t-test and ANOVA test were used. RESULTS: A significant correlation (P < 0.001) was found between these landmarks with ICaD, in which interalar width shows highest degree of correlation (r = 0.639). ANOVA test showed that maximum number of individuals had < 5% variability range between actual values and calculated values of ICaD for all extraoral facial landmarks except intercanthal width. CONCLUSION: Combination of various facial and oral factors should be considered while selecting artificial teeth. Regression equations obtained can be well used during teeth selection to achieve a significant result.

A pilot study to evaluate the efficacy of cerrobend shielding stents in preventing adverse radiotherapeutic effects in buccal carcinoma patients.

BACKGROUND: Radiation stents made of Lipowitz metal or cerrobend alloy are commonly used to shield uninvolved tissues from electron beams used in therapeutic radiation treatment of head and neck cancers. However, studies investigating the efficacy of cerrobend shielding stent in patients with unilateral buccal carcinoma remain rare. PURPOSE: To evaluate the efficacy of cerrobend shielding stents in minimizing the potential adverse effects of radiation on oral tissues in buccal carcinoma patients. MATERIALS AND METHODS: Twenty.eight participants were selected for the study based on predetermined inclusion criteria, out of which four participants were lost to follow-.up. Half of the remaining participants. (N = 12) were randomly given cerrobend shielding stent and the remaining 12 formed the control group. The effects of radiotherapy were evaluated by using Radiation Therapy Oncology Group. (RTOG) 0435 Head and Neck adverse effects grading tool. All participants were evaluated for xerostomia, mucositis, dysphagia, salivary changes, dysguesia, pain, trismus and radiation caries at baseline and 1 and 3. months post.radiotherapy. RESULTS: All adverse effects were higher in control compared to study group, with post therapy difference for pain in swallowing, salivary changes, mucositis, dysphagia, dry mouth and caries being statistically significant. CONCLUSIONS: Cerrobend alloy can be used effectively as shielding stent to reduce the adverse effects associated with external beam radiation therapy in unilateral buccal carcinoma patients.

An Integrated Approach for Cosmetic Rehabilitation of a Patient with Atrophia bulbi.

Atrophia bulbiis a small, shrunken, non-functional eye, most commonly due to trauma. It represents an ocular end-stage disease characterized by atrophy, shrinkage, and disorganization of the eyeball and intraocular contents, demonstrating the result of failed previous ocular therapy in which restoration of the morphologic and functional integrity of the eye is not possible. Majority of the patients with Atrophia bulbi eventually become blind and cosmetically unacceptable. The rehabilitation of such patients presents a challenging clinical situation, as the patient has already been clouded by the psychological distress. This paper demonstrates a case of 35-year male with Atrophia bulbi, who was successfully rehabilitated with precisely fabricated ocular prosthesis fitted over the atrophic eye.

Maxillary canine transposition - A literature review with case report.

Tooth transposition is a severe disturbance of tooth eruptive position and their sequence, which involve certain teeth occurring at any of several specific sites in the mouth. Tooth transposition is of several types and their classification depends on the teeth involved. The review of literature aims to discuss the incidence and identifying factors related to occurrence of this dental anomaly. The present study aims to discuss about the prosthetic treatment of a patient with unilateral maxillary canine - lateral incisor transposition with the absence of permanent lateral incisor.

Mercury and other biomedical waste management practices among dental practitioners in India.

OBJECTIVES: The objective of the study was to assess the awareness and performance towards dental waste including mercury management policy and practices among the dental practitioners in North India. MATERIALS AND METHODS: An epidemiologic survey was conducted among 200 private dental practitioners. The survey form was composed of 29 self-administered questions frame based on knowledge, attitude, and those regarding the practices of dentists in relation to dental health-care waste management. The resulting data were coded and a statistical analysis was done. RESULTS AND DISCUSSION: About 63.7% of the dentists were not aware of the different categories of biomedical waste generated in their clinics. Only 31.9% of the dentists correctly said that outdated and contaminated drugs come under cytotoxic waste. 46.2% said they break the needle and dispose of it and only 21.9% use needle burner to destroy it. 45.0% of the dentists dispose of the developer and fixer solutions by letting them into the sewer, 49.4% of them dilute the solutions and let them into sewer and only 5.6% return them to the supplier. About 40.6% of the dentists dispose of excess silver amalgam by throwing it into common bin. CONCLUSION: It was concluded that not all dentists were aware of the risks they were exposed to and only half of them observe infection control practices.

A multidisciplinary approach for ocular rehabilitation following surgical treatment of retinoblastoma: One year follow-up.

Retinoblastoma is a highly malignant neoplasm. Most of the cases are usually advanced at the time of detection, requiring enucleation to salvage the child's life. Just treating the patient for cancer is not enough; the cosmetic rehabilitation of these patients is equally important and it should always be an integral part of their treatment, to help them re-integrate in the aesthetic conscious society. Rehabilitating such patients require a multidisciplinary approach involving the combined and timely efforts of an ophthalmologist, paediatric oncologist and a skilled maxillofacial prosthodontist. This paper presents a case of 3½-year-old girl who had enucleation of her right eye due to retinoblastoma along with chemotherapy and radiotherapy at the age of 3 years. The patient was recalled regularly for follow-up at 3 month intervals for ophthalmic examinations and she was rehabilitated cosmetically with customised ocular prosthesis during the various stages of her developmental growth.

Lost salt technique for severely resorbed alveolar ridges: An innovative approach.

The success of a complete denture relies on the principles of retention, stability and support. The prosthodontist skill lies in applying these principles efficiently in critical situations. Severely resorbed maxillary edentulous ridges that are narrow and constricted with increased inter ridge space provide decreased support, retention and stability. The consequent weight of the processed denture only compromises them further. This article describes a case report of an edentulous patient with resorbed ridges where a simplified technique of fabricating a hollow maxillary complete denture using lost salt technique was used for preservation of denture bearing areas. The hollowing of the denture reduces the weight of the denture, thereby enhancing stability and retention, reducing the further resorption of the jaws.

Customization of stock eye prosthesis for a pediatric patient by a simplified technique.

The unfortunate loss or absence of an eye may be caused by congenital defect , irreparable trauma, tumor or blind eye. The role of the maxillofacial prosthodontist in fabricating an ocular prosthesis to restore facial symmetry and normal appearance for the anophthalmic patient becomes essential. A custom-made ocular prosthesis is an excellent alternative for the people who lose their eye especially in young age. It has acceptable fit, retention and esthetics but is technically difficult to fabricate. On the other hand the stock eye has compromised fit and poor esthetics. Our case report presents a simple technique of customization of stock eye prosthesis to provide accurate fit and acceptable esthetics. How to cite this article: Jurel SK, Talwar N, Chand P, Singh RD, Gupta DS. Customization of Stock Eye Prosthesis for a Pediatric Patient by a Simplified Technique. Int J Clin Pediatr Dent 2012;5(2):155-158.

Biocompatibility of polymethylmethacrylate resins used in dentistry.

Biocompatibility or tissue compatibility describes the ability of a material to perform with an appropriate host response when applied as intended. Poly-methylmethacrylate (PMMA) based resins are most widely used resins in dentistry, especially in fabrication of dentures and orthodontic appliances. They are considered cytotoxic on account of leaching of various potential toxic substances, most common being residual monomer. Various in vitro and in vivo experiments and cell based studies conducted on acrylic based resins or their leached components have shown them to have cytotoxic effects. They can cause mucosal irritation and tissue sensitization. These studies are not only important to evaluate the long term clinical effect of these materials, but also help in further development of alternate resins. This article reviews information from scientific full articles, reviews, or abstracts published in dental literature, associated with biocompatibility of PMMA resins and it is leached out components. Published materials were searched in dental literature using general and specialist databases, like the PubMED database.

Computed tomographic evaluation of the effects of mandibular advancement devices on pharyngeal dimension changes in patients with obstructive sleep apnea.

PURPOSE: The aims of this study were to evaluate the effect of a mandibular advancement device on oropharyngeal dimension in patients with obstructive sleep apnea (OSA) and reveal the predominate site of changes produced by mandibular advancement using computed tomography (CT). MATERIALS AND METHODS: CT scans of 20 patients diagnosed with OSA were taken with and without the appliance. Three-dimensional changes in pharyngeal shape measured on cross-sectional CT images during two respiratory cycles after oral appliance insertion were estimated at five vertical levels using three variables: (1) lateral dimension, (2) anteroposterior dimension, and (3) cross-sectional area. Various parameters related to severity of OSA such as snoring volume, frequency, duration, and episodes; breathing pauses; oxygen saturation; Epworth Sleepiness Scale (ESS) score; and Apnea Hypopnea Index (AHI) score underwent comparative evaluation subjectively and objectively. Data were analyzed using the Student t test for parametric analysis. RESULTS: A significant increase in the lateral and anteroposterior dimension of the pharyngeal lumen was observed at all five levels, but the mean change was greatest at the retroglossal level and smallest at the hypopharyngral level in both the lateral and anteroposterior dimensions. The cross-sectional area at all levels appeared to increase significantly, and apnea indices improved significantly. A significant decrease in snoring volume, snoring frequency, breathing pauses, snoring duration, snoring episodes, ESS score, and AHI score and a significant increase in oxygen saturation were found after treatment with the mandibular advancement device. CONCLUSION: Within the limitations of this study, CT was shown to be useful in evaluating treatment efficacy in subjects with OSA.