Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nanotechnology ; 31(37): 375704, 2020 Sep 11.
Artigo em Inglês | MEDLINE | ID: mdl-32480382

RESUMO

The ultrafast water transport in graphene nanoplatelets (GNPs) coating is attributed to the low friction passages formed by pristine graphene and the hydrophilic functional groups which provide a strong interaction force to the water molecules. Here, we examine the influence of the supporting substrate on the ultrafast water transport property of multilayer graphene coatings experimentally and by computational modelling. Thermally cured GNPs manifesting ultrafast water permeation are coated on different substrate materials, namely aluminium, copper, iron and glass. The physical and chemical structures of the GNPs coatings which are affected by the substrate materials are characterized using various spectroscopy techniques. Experimentally, the water permeation and absorption tests evidence the significant influence of the substrate on the rapid water permeation property of GNPs-coating. The water transport rates of the GNPs coatings correspond to the wettability and the free surface energy of their substrates where the most hydrophilic substrate induces the highest water transport rate. In addition, we conduct molecular dynamics (MD) simulations to investigate the transport rate of water molecules through multilayer GNPs adjacent to different substrate materials. The MD simulations results agree well with the experimental results inferring the strong influence of the substrate materials on the fast water transport of GNPs. Therefore, selection of substrate has to be taken into consideration when the GNPs-coating is placed into applications.

2.
Soft Matter ; 15(21): 4391-4400, 2019 May 29.
Artigo em Inglês | MEDLINE | ID: mdl-31090782

RESUMO

Topological defect nucleation and boundary branching in crystal growth on a curved surface are two typical elastic instabilities driven by curvature induced stress, and have usually been discussed separately in the past. In this work they are simultaneously considered during crystal growth on a sphere. Phase diagrams with respect to sphere radius, size, edge energy and stiffness of the crystal for the equilibrium crystal morphologies are achieved by theoretical analysis and validated by Brownian dynamics simulations. The simulation results further demonstrate the detail of morphological evolution governed by these two different stress relaxation modes. Topological defect nucleation and boundary branching not only compete with each other but also coexist in a range of combinations of factors. Clarification of the interaction mechanism provides a better understanding of various curved crystal morphologies for their potential applications.

3.
Nanotechnology ; 27(48): 485402, 2016 Dec 02.
Artigo em Inglês | MEDLINE | ID: mdl-27819801

RESUMO

A single-layer zinc oxide (ZnO) nanorod array-based micro energy harvester was designed and integrated with a piezoelectric metacapacitor. The device presents outstanding low-frequency (1-10 Hz) mechanical energy harvesting capabilities. When compared with conventional pristine ZnO nanostructured piezoelectric harvesters or generators, both open-circuit potential and short-circuit current are significantly enhanced (up to 3.1 V and 124 nA cm-2) for a single mechanical knock (∼34 kPa). Higher electromechanical conversion efficiency (1.3 pC/Pa) is also observed. The results indicate that the integration of the piezoelectric metacapacitor is a crucial factor for improving the low-frequency energy harvesting performance. A double piezoelectric-driven mechanism is proposed to explain current higher output power, in which the metacapacitor plays the multiple roles of charge pumping, storing and transferring. An as-fabricated prototype device for lighting an LED demonstrates high power transference capability, with over 95% transference efficiency to the external load.

4.
Phys Chem Chem Phys ; 18(22): 15363-8, 2016 Jun 01.
Artigo em Inglês | MEDLINE | ID: mdl-27212639

RESUMO

Ethanol-based nanofluids have attracted much attention due to the enhancement in heat transfer and their potential applications in nanofluid-type fuels and thermal storage. Most research has been conducted on ethanol-based nanofluids containing various nanoparticles in low mass fraction; however, to-date such studies based on high weight fraction of nanoparticles are limited due to the poor stability problem. In addition, very little existing work has considered the inevitable water content in ethanol for the change of thermal conductivity. In this paper, the highly stable and well-dispersed TiO2-ethanol nanofluids of high weight fraction of up to 3 wt% can be fabricated by stirred bead milling, which enables the studies of thermal conductivity of TiO2-ethanol nanofluids over a wide range of operating temperatures. Our results provide evidence that the enhanced thermal conductivity is mainly contributed by the percolation network of nanoparticles at low temperatures, while it is in combination with both Brownian motion and local percolation of nanoparticle clustering at high temperatures.

5.
J R Soc Interface ; 5(20): 373-82, 2008 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-17638648

RESUMO

Fibrillar structures are common features on the feet of many animals, such as geckos, spiders and flies. Theoretical analyses often use periodical array to simulate the assembly, and each fibril is assumed to be of equal load sharing (ELS). On the other hand, studies on a single fibril show that the adhesive interface is flaw insensitive when the size of the fibril is not larger than a critical one. In this paper, the Dugdale-Barenblatt model has been used to study the conditions of ELS and how to enhance adhesion by tuning the geometrical parameters in fibrillar structures. Different configurations in an array of fibres are considered, such as line array, square and hexagonal patterns. It is found that in order to satisfy flaw-insensitivity and ELS conditions, the number of fibrils and the pull-off force of the fibrillar interface depend significantly on the fibre separation, the interface interacting energy, the effective range of cohesive interaction and the radius of fibrils. Proper tuning of the geometrical parameters will enhance the pull-off force of the fibrillar structures. This study may suggest possible methods to design strong adhesion devices for engineering applications.


Assuntos
Materiais Biomiméticos , Modelos Teóricos , Nanoestruturas , Adesividade , Elasticidade
6.
Sci Rep ; 7(1): 11111, 2017 09 11.
Artigo em Inglês | MEDLINE | ID: mdl-28894256

RESUMO

Electrocaloric (EC) materials show promise in eco-friendly solid-state refrigeration and integrable on-chip thermal management. While direct measurement of EC thin-films still remains challenging, a generic theoretical framework for quantifying the cooling properties of rich EC materials including normal-, relaxor-, organic- and anti-ferroelectrics is imperative for exploiting new flexible and room-temperature cooling alternatives. Here, we present a versatile theory that combines Master equation with Maxwell relations and analytically relates the macroscopic cooling responses in EC materials with the intrinsic diffuseness of phase transitions and correlation characteristics. Under increased electric fields, both EC entropy and adiabatic temperature changes increase quadratically initially, followed by further linear growth and eventual gradual saturation. The upper bound of entropy change (∆Smax) is limited by distinct correlation volumes (V cr ) and transition diffuseness. The linearity between V cr and the transition diffuseness is emphasized, while ∆Smax = 300 kJ/(K.m3) is obtained for Pb0.8Ba0.2ZrO3. The ∆Smax in antiferroelectric Pb0.95Zr0.05TiO3, Pb0.8Ba0.2ZrO3 and polymeric ferroelectrics scales proportionally with V cr-2.2, owing to the one-dimensional structural constraint on lattice-scale depolarization dynamics; whereas ∆Smax in relaxor and normal ferroelectrics scales as ∆Smax ~ V cr-0.37, which tallies with a dipolar interaction exponent of 2/3 in EC materials and the well-proven fractional dimensionality of 2.5 for ferroelectric domain walls.

7.
Chem Commun (Camb) ; 52(99): 14242-14245, 2016 Dec 06.
Artigo em Inglês | MEDLINE | ID: mdl-27872917

RESUMO

Photocatalytic CO2 reduction over the UV-Vis-NIR broad spectrum was realized for the first time. The presence of surface oxygen vacancy defects on Bi2WO6 resulted in significant photocatalytic enhancement over the pristine counterpart under UV and visible light irradiation. Meanwhile, the photocatalytic responsiveness of Bi2WO6-OV was successfully extended to the NIR region.

8.
ACS Appl Mater Interfaces ; 6(8): 5577-84, 2014 Apr 23.
Artigo em Inglês | MEDLINE | ID: mdl-24670393

RESUMO

The highly conductive and flexible nickel-polyethylene terephthalate (Ni-PET) substrate was prepared by a facile way including electrodeposition and hot-press transferring. The effectiveness was demonstrated in the counter electrode of dye-sensitized solar cells (DSSCs). The Ni film electrodeposition mechanism, microstructure, and DSSC performance for the Ni-PET flexible substrate were investigated. The uniform and continuous Ni film was first fabricated by electroplating metallic Ni on fluorine-doped tin oxide (FTO) and then intactly transferred onto PET via hot-pressing using Surlyn as the joint adhesive. The obtained flexible Ni-PET substrate shows low sheet resistance of 0.18Ω/□ and good chemical stability for the I(-)/I(3-) electrolyte. A high light-to-electric energy conversion efficiency of 7.89% was demonstrated in DSSCs system based on this flexible electrode substrate due to its high conductivity, which presents an improvement of 10.4% as compared with the general ITO-PEN flexible substrate. This method paves a facile and cost-effective way to manufacture various metals on a plastic nonconducive substrate beneficial for the devices toward flexible and rollable.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA