In vitro cultivation of Vismia japurensis: Isolation of the new anthrone 1,8,10-trihydroxy-3,10-dimethyl-9(10H)-anthracenone.

Vismia japurensis Reichardt is a plant of ecological and chemical importance from which a variety of bioactive substances have been isolated. The current study aimed to establish in vitro cultures of this species as a source of secondary metabolites. Appropriate decontamination treatments and germination tests were performed and, after in vitro culture establishment, the propagated plants were multiplied in a sterile environment to increase the biomass of available experimental material. Seeds showed low contamination and a high germination percentage on Woody Plant Medium (WPM) supplemented with gibberellic acid (both at concentrations of 5 and 10 mg/L). V. japurensis nodal segments rapidly regenerated when first grown in WPM and then transplanted to Murashige and Skoog medium (MS). After 60 days in MS medium, the propagated plants were removed, lyophilized, and extracted with hexane and methanol. The hexane extract was fractionated via open column chromatography, and the substance isolated was purified by high performance liquid chromatography. Structural determination of the isolated substance was carried out using one and two-dimensional nuclear magnetic resonance and mass spectrometry. The isolated substance was identified as 1,8,10-trihydroxy-3,10-dimethyl-9(10H)-anthracenone, which, based on the conducted literature search, is reported for the first time.

The impact of inorganic fillers, organic content, and polymerization mode on the degree of conversion of monomers in resin-matrix cements for restorative dentistry: a scoping review.

PURPOSE: The main aim of the present study was to carry out a scoping review on the differences in degree of conversion of monomers regarding several types resin cements, indirect restorative materials, and light-curing procedures used in dentistry. METHOD: A bibliographic review was performed on PubMed using the following search items: "degree of conversion" OR "filler" AND "resin cement" OR "inorganic cement" AND "organic" OR "radiopacity" OR "refractive" OR "transmittance" OR "type" AND "resin composite." The search involved articles published in English language within the last thirteen years. A research question has been formulated following the PICO approach as follow: "How different is the degree of conversion of monomers comparing several types of resin-matrix cements?". RESULTS: Within the 15 selected studies, 8 studies reported a high degree of conversion (DC) of the organic matrix ranging from 70 up to 90% while 7 studies showed lower DC values. Dual-cured resin-matrix cements revealed the highest mean values of DC, flexural strength, and hardness when compared with light- and self-polymerized ones. DC mean values of resin-matrix cements light-cured through a ceramic veneer with 0.4 mm thickness were higher (~ 83%) than those recorded for resin-matrix cements light-cured through a thicker ceramic layer of 1.5 mm (~ 77%). CONCLUSIONS: The highest percentage of degree of conversion of monomers was reported for dual-cured resin-matrix cements and therefore both chemical and light-induced pathways promoted an enhanced polymerization of the material. Similar degree of conversion of the same resin-matrix cement were recorded when the prosthetic structure showed a low thickness. On thick prosthetic structures, translucent materials are required to allow the light transmission achieving the resin-matrix cement. CLINICAL RELEVANCE: The chemical composition of resin-matrix cements and the light-curing mode can affect the polymerization of the organic matrix. Thus, physical properties of the materials can vary leading to early clinical failures at restorative interfaces. Thus, the analysis of the polymerization pathways of resin-matrix cements is significantly beneficial for the clinical performance of the restorative interfaces.

Severity of illness and risk of mortality from all patient refined-diagnosis related groups: Two scales of different concepts or two sides of the same coin?

All patient refined-diagnosis related groups (APR-DRGs) includes severity of illness (SOI) and risk of mortality (ROM) subclasses. For predictions, both subscales are used together or interchangeably. We aimed to compare SOI and ROM by evaluating the reliability and agreement between both. We performed a retrospective observational study using mainland Portuguese public hospitalisations of adult patients from 2011 to 2016. Reliability (quadratic weighted kappa) and agreement (proportion of agreement) between SOI and ROM were analysed overall and by APR-DRG. While overall reliability and agreement between SOI and ROM were high (weighted kappa: 0.717, 95% CI 0.717-0.718; proportion of agreement: 69.0%, 95% CI 69.0-69.0) there was high heterogeneity across APR-DRGs, ranging from 0.016 to 0.846 on reliability and from 23.1% to 94.8% on agreement. Most of APR-DRGs (263 out of 284) showed a higher proportion of episodes with ROM level above the SOI level than the opposite. In conclusion, SOI and Risk of Mortality measures must be clearly distinguished and are 'two scales of different concepts' rather than 'two sides of the same coin'. However, this is more evident for some APR-DRGs than for others.

Identification of avoidable patients at triage in a Paediatric Emergency Department: a decision support system using predictive analytics.

BACKGROUND: Crowding has been a longstanding issue in emergency departments. To address this, a fast-track system for avoidable patients is being implemented in the Paediatric Emergency Department where our study is conducted. Our goal is to develop an optimized Decision Support System that helps in directing patients to this fast track. We evaluated various Machine Learning models, focusing on a balance between complexity, predictive performance, and interpretability. METHODS: This is a retrospective study considering all visits to a university-affiliated metropolitan hospital's PED between 2014 and 2019. Using information available at the time of triage, we trained several models to predict whether a visit is avoidable and should be directed to a fast-track area. RESULTS: A total of 507,708 visits to the PED were used in the training and testing of the models. Regarding the outcome, 41.6% of the visits were considered avoidable. Except for the classification made by triage rules, i.e. considering levels 1,2, and 3 as non-avoidable and 4 and 5 as avoidable, all models had similar results in model's evaluation metrics, e.g. Area Under the Curve ranging from 74% to 80%. CONCLUSIONS: Regarding predictive performance, the pruned decision tree had evaluation metrics results that were comparable to the other ML models. Furthermore, it offers a low complexity and easy to implement solution. When considering interpretability, a paramount requisite in healthcare since it relates to the trustworthiness and transparency of the system, the pruned decision tree excels. Overall, this paper contributes to the growing body of research on the use of machine learning in healthcare. It highlights practical benefits for patients and healthcare systems of the use ML-based DSS in emergency medicine. Moreover, the obtained results can potentially help to design patients' flow management strategies in PED settings, which has been sought as a solution for addressing the long-standing problem of overcrowding.

Bibliometric analysis of the 100 most cited articles on bone grafting in dentistry.

AIM: This bibliometric study analyzed the characteristics of the 100 most cited articles on bone grafts in dentistry. MATERIALS AND METHODS: A database search was performed on the Web of Science Core Collection using a specific search strategy. Scopus and Google Scholar were also consulted for citation comparisons. Data extracted included: title, citation metrics, publication year, journal, study design, graft material, surgical technique, authors, institution, and country. Bibliometric networks were generated using VOSviewer. RESULTS: The identified articles were published between 1991 and 2019. Citation counts ranged from 120 to 1161 (mean: 240, 30). Clinical Oral Implants Research was the most cited journal (5175 citations; 25/100). Xenogeneic bone graft material was the most frequently used (5130 citations; 22/100). Europe had 62 articles (14,604 citations), and the United States was the most prominent country (5209 citations; 22/100). The University of Bern had the highest number of citations (2565 citations; 13/100), with Buser D as the author with the largest number of articles (2648 citations; 12/100). CONCLUSION: This study shows the scientific progress on bone grafts in dentistry. The use of xenogeneic grafts for horizontal and/or vertical ridge augmentation was the most prominent trend.

Surface modification of zirconia or lithium disilicate-reinforced glass ceramic by laser texturing to increase the adhesion of prosthetic surfaces to resin cements: an integrative review.

OBJECTIVE: The purpose of this study was to perform an integrative review on laser texturing the inner surface of lithium disilicate-reinforced glass ceramic or zirconia to increase their bond strength to resin-matrix cements. MATERIALS AND METHOD: A bibliographic review was performed on PubMed using the following search terms: "zirconia" OR "lithium disilicate" AND "laser" AND "surface" OR "roughness" AND "bond strength" AND "luting agent" OR "resin cement." Studies published in English language until March 15, 2023, were selected regarding the purpose of this study. RESULTS: A total of fifty-six studies were identified althoug thirteen studies were selected. The findings revealed that zirconia surfaces were significantly modified after laser irradiation resulting in macro-scale aligned retentive regions with depth values ranging from 50 to 120 µm. Average roughness values of laser-textured zirconia by Er,Cr:YSGG laser (~ 0.83 µm) were quite similar when compared to grit-blasted zirconia surfaces (~ 0.9 µm) although roughness increased up to 2.4 µm depending on the laser type and parameters. Lithium disilicate-reinforced glass ceramics textured with Er:YAG revealed an average roughness of around 3.5 µm while surfaces textured using Nd:YAG laser revealed an average roughness of 2.69 µm; that was quite similar to the roughness values recorded for etched surfaces (2.64 µm). The shear bond strength (SBS) values of zirconia surfaces textured on Nd:YVO4 laser irradiation were slightly higher (~ 33.5 MPa) than those recorded for grit-blasted zirconia surfaces (28 MPa). Laser-textured zirconia surfaces on CO2 laser revealed higher SBS values (18.1 ±0.8 MPa) than those (9.1 ± 0.56 MPa) recorded for untreated zirconia surfaces. On lithium disilicate-reinforced glass ceramics, higher SBS values to resin-matrix cements were recorded for specimens textured with a combination of fractional CO2 laser irradiation and HF acid etching (~ 22-24 MPa) when compared with grit-blasted specimens (12.2 MPa). Another study revealed SBS values at around 27.5 MPa for Er:YAG-textured lithium disilicate-reinforced glass ceramics to resin-matrix cements. CONCLUSIONS: The laser irradiation at high power increases the roughness of the inner surface of lithium disilicate-reinforced glass ceramic or zirconia leading to an enhanced bond strength to resin-matrix cements. Thus, the laser type and irradiation parameters can be adjusted to enhance the macro- and micro-scale retention of zirconia and glass ceramic surfaces to resin-matrix cements. CLINICAL RELEVANCE: Alternative methods for surface modification of lithium disilicate-reinforced glass ceramic and zirconia surfaces have been assessed to provide proper morphological aspects for enhanced adhesion to resin-matrix cements. An increase in the bond strength of glass ceramics or zirconia to resin-matrix cements can improve the long-term performance of cemented prosthetic structures in the oral cavity.

Effect of inorganic fillers on the light transmission through traditional or flowable resin-matrix composites for restorative dentistry.

OBJECTIVES: The aim of this in vitro study was to evaluate the light transmission through five different resin-matrix composites regarding the inorganic filler content. METHODS: Resin-matrix composite disc-shaped specimens were prepared on glass molds. Three traditional resin-matrix composites contained inorganic fillers at 74, 80, and 89 wt. % while two flowable composites revealed 60 and 62.5 wt. % inorganic fillers. Light transmission through the resin-matrix composites was assessed using a spectrophotometer with an integrated monochromator before and after light curing for 10, 20, or 40s. Elastic modulus and nanohardness were evaluated through nanoindentation's tests, while Vicker's hardness was measured by micro-hardness assessment. Chemical analyses were performed by FTIR and EDS, while microstructural analysis was conducted by optical microscopy and scanning electron microscopy. Data were evaluated using two-way ANOVA and Tukey's test (p < 0.05). RESULTS: After polymerization, optical transmittance increased for all specimens above 650-nm wavelength irradiation since higher light exposure time leads to increased light transmittance. At 20- or 40-s irradiation, similar light transmittance was recorded for resin composites with 60, 62, 74, or 78-80 wt. % inorganic fillers. The lowest light transmittance was recorded for a resin-matrix composite reinforced with 89 wt. % inorganic fillers. Thus, the size of inorganic fillers ranged from nano- up to micro-scale dimensions and the high content of micro-scale inorganic particles can change the light pathway and decrease the light transmittance through the materials. At 850-nm wavelength, the average ratio between polymerized and non-polymerized specimens increased by 1.6 times for the resin composite with 89 wt. % fillers, while the composites with 60 wt. % fillers revealed an increased ratio by 3.5 times higher than that recorded at 600-nm wavelength. High mean values of elastic modulus, nano-hardness, and micro-hardness were recorded for the resin-matrix composites with the highest inorganic content. CONCLUSIONS: A high content of inorganic fillers at 89 wt.% decreased the light transmission through resin-matrix composites. However, certain types of fillers do not interfere on the light transmission, maintaining an optimal polymerization and the physical properties of the resin-matrix composites. CLINICAL SIGNIFICANCE: The type and content of inorganic fillers in the chemical composition of resin-matrix composites do affect their polymerization mode. As a consequence, the clinical performance of resin-matrix composites can be compromised, leading to variable physical properties and degradation.

Root canal disinfection and maintenance of the remnant tooth tissues by using grape seed and cranberry extracts.

The purpose of this study was to perform an integrative review on the effects of cranberry and grape seed extracts concerning the disinfection of root canals maintaining the strength of the remnant tooth tissues' structure. A bibliographical search was carried out on the PubMed electronic platform using the following key terms: cranberry, grape seed, vaccinium macrocarpon, proanthocyanidin, antibacterial, antimicrobial, decontamination, disinfection, bacteria removal, bacteria eradication, bacteria elimination, endodontic, root canal, faecalis, and strength. The inclusion criteria involved articles published in the English language, until March, 2022, reporting the antibacterial effect of grape seed and cranberry extracts. Of 185 studies identified, 13 studies were selected for the present review. The grape seed extract (GSE), composed of proanthocyanidins, showed an antioxidant activity against the main bacteria found in endodontic secondary infection. The percentage of bacteria removal was recorded at around 96.97% by using GSE. Studies on cranberry extracts, which are composed of proanthocyanidins, revealed antimicrobial effects against bacteria related to periodontitis and dental caries. Additionally, GSE or cranberry allowed the dentin collagen cross-linking that preserved the 3D collagen network leading to the maintenance of the strength of the remnant tooth structure. However, the contaminated smear layer could not be removed by using only GSE or cranberry. Cranberry extracts and GSE revealed a significant antimicrobial activity in endodontic disinfection without changing the mechanical properties of the remnant dentin tissues. Furthermore, those components can be associated with traditional compounds to enhance their antimicrobial effects and eliminate the smear layer.

Toxicity of resin-matrix cements in contact with fibroblast or mesenchymal cells.

The main aim of this study was to perform an integrative review on the toxic effects of resin-matrix cements and their products in contact with fibroblasts or mesenchymal cells. A bibliographic search was performed on PubMed using the following search terms: "cytotoxicity" AND "fibroblast" OR "epithelial" OR "mesenchymal" AND "polymerization" OR "degree of conversion" OR "methacrylate" OR "monomer" AND "resin cement" OR "resin-based cement". The initial search in the available database yielded a total of 277 articles of which 21 articles were included in this review. A decrease in the viability of mouse fibroblasts ranged between 13 and 15% that was recorded for different resin-matrix cements after light curing exposure for 20 s. The viability of human fibroblasts was recorded at 83.11% after light curing for 20 s that increased up to 90.9% after light curing exposure for 40 s. Most of the studies linked the highest toxicity levels when the cells were in contact with Bis-GMA followed by UDMA, TEGDMA and HEMA. Resin-matrix cements cause a cytotoxic reaction when in contact with fibroblasts or mesenchymal cells due to the release of monomers from the polymeric matrix. The amount of monomers released from the resin matrix and their cytotoxicity depends on the polymerization parameters.

Multisource and temporal variability in Portuguese hospital administrative datasets: Data quality implications.

BACKGROUND: Unexpected variability across healthcare datasets may indicate data quality issues and thereby affect the credibility of these data for reutilization. No gold-standard reference dataset or methods for variability assessment are usually available for these datasets. In this study, we aim to describe the process of discovering data quality implications by applying a set of methods for assessing variability between sources and over time in a large hospital database. METHODS: We described and applied a set of multisource and temporal variability assessment methods in a large Portuguese hospitalization database, in which variation in condition-specific hospitalization ratios derived from clinically coded data were assessed between hospitals (sources) and over time. We identified condition-specific admissions using the Clinical Classification Software (CCS), developed by the Agency of Health Care Research and Quality. A Statistical Process Control (SPC) approach based on funnel plots of condition-specific standardized hospitalization ratios (SHR) was used to assess multisource variability, whereas temporal heat maps and Information-Geometric Temporal (IGT) plots were used to assess temporal variability by displaying temporal abrupt changes in data distributions. Results were presented for the 15 most common inpatient conditions (CCS) in Portugal. MAIN FINDINGS: Funnel plot assessment allowed the detection of several outlying hospitals whose SHRs were much lower or higher than expected. Adjusting SHR for hospital characteristics, beyond age and sex, considerably affected the degree of multisource variability for most diseases. Overall, probability distributions changed over time for most diseases, although heterogeneously. Abrupt temporal changes in data distributions for acute myocardial infarction and congestive heart failure coincided with the periods comprising the transition to the International Classification of Diseases, 10th revision, Clinical Modification, whereas changes in the Diagnosis-Related Groups software seem to have driven changes in data distributions for both acute myocardial infarction and liveborn admissions. The analysis of heat maps also allowed the detection of several discontinuities at hospital level over time, in some cases also coinciding with the aforementioned factors. CONCLUSIONS: This paper described the successful application of a set of reproducible, generalizable and systematic methods for variability assessment, including visualization tools that can be useful for detecting abnormal patterns in healthcare data, also addressing some limitations of common approaches. The presented method for multisource variability assessment is based on SPC, which is an advantage considering the lack of gold standard for such process. Properly controlling for hospital characteristics and differences in case-mix for estimating SHR is critical for isolating data quality-related variability among data sources. The use of IGT plots provides an advantage over common methods for temporal variability assessment due its suitability for multitype and multimodal data, which are common characteristics of healthcare data. The novelty of this work is the use of a set of methods to discover new data quality insights in healthcare data.

Surface modification of zirconia dental implants by laser texturing.

The aim of this work was to perform an integrative literature review on the influence of laser irradiation on zirconia implants to enhance surface topographic aspects and the biological response for osseointegration. An electronic search was carried out on the PubMed database using the following search terms: "zirconia" AND "laser" AND "surface modification" OR "surface treatment" AND "dental implants" OR "bone" OR "osteoblast" OR "osseointegration." Of the identified articles, 12 studies were selected in this review. Results reported that the laser irradiation was capable of promoting changes on the zirconia surfaces regarding topographic aspects, roughness, and wettability. An increase in roughness was recorded at micro- and nano-scale and it resulted in an enhanced wettability and biological response. Also, adhesion, spreading, proliferation, and differentiation of osteogenic cells were also enhanced after laser irradiation mainly by using a femtosecond laser at 10nJ and 80 MHz. After 3 months of osseointegration, in vivo studies in dogs revealed a similar average percentage of bone-to-implant contact (BIC) on zirconia surfaces (around 47.9 ± 16%) when compared to standard titanium surfaces (61.73 ±16.27%), denoting that there is no significant difference between such different materials. The laser  approach revealed several parameters that can be used for zirconia surface modification such as irradiation intensity, time, and frequency. Laser irradiation parameters can be optimized and well-controlled to reach desirable surface morphologic aspects and biological response concerning the osseointegration process.

The influence of inorganic fillers on the light transmission through resin-matrix composites during the light-curing procedure: an integrative review.

PURPOSE: The objective of this study was to perform an integrative review on the effect the inorganic fillers on the light transmission through the resin-matrix composites during the light-curing procedure. METHOD: A bibliographic review was performed on PubMed using the following search terms: "fillers" OR "particle" AND "light curing" OR "polymerization" AND "light transmission" OR "light absorption" OR "light irradiance" OR "light attenuation" OR "light diffusion" AND "resin composite." The search involved articles published in English language in the last 10 years. RESULTS: Selected studies reported a decrease in biaxial strength and hardness in traditional resin-matrix composites in function of the depth of polymerization. However, there were no significant differences in biaxial strength and hardness recorded along the polymerization depth of Bulk-Fill™ composites. Strength and hardness were enhanced by increasing the size and content of inorganic fillers although some studies revealed a progressive decrease in the degree of conversion on increasing silica particle size. The translucency of glass-ceramic spherical fillers promoted light diffusion mainly in critical situations such as in the case of deep proximal regions of resin-matrix composites. CONCLUSIONS: The amount of light transmitted through the resin-matrix composites is influenced by the size, content, microstructure, and shape of the inorganic filler particles. The decrease of the degree of conversion affects negatively the physical and mechanical properties of the resin-matrix composites. CLINICAL RELEVANCE: The type and content of inorganic fillers in the chemical composition of resin-matrix composites do affect their polymerization. As a consequence, the clinical performance of resin-matrix composites can be compromised leading to variable physical properties and degradation. The polymerization mode of resin-matrix composites can be improved according to the type of inorganic fillers in their chemical composition.

Surface modification of glass fiber-reinforced composite posts to enhance their bond strength to resin-matrix cements: an integrative review.

BACKGROUND: Endodontically treated teeth usually can reveal an extensive loss of dental structure and require the use of intraradicular posts to provide adequate support and retention. Retention of the post depends on the surface treatment of the endodontic post itself and on the root canal dentin as well as on the type of resin-matrix cement. PURPOSE: The main aim of this study was to conduct an integrative review on the influence of different surface treatment methods of glass fiber-reinfored resin composite (GFRC) posts on their push-out bond strength to resin-matrix cements in endodontically treated teeth rehabiliation. METHOD: A literature search was performed on PubMed (via National Library of Medicine) regarding articles published within the last 10 years, using the following combination of search terms: "intracanal post" OR "endodontic post" OR "root canal post" OR "intraradicular post" OR "glass fiber" AND "resin cement" AND "adhesion" OR "bond strength" OR "shear bond strength" OR "push out". RESULTS: Results from the selected studies recorded the highest push-out bond strength around 22.5 MPa) on GFRC posts to resin-matrix cements when the surfaces were pre-treated by grit-blasting with silicate followed by silane conditioning. However, high values of push-out bond strength (21.5 MPa) were also noticed for GFRC posts after etching with hydrogen peroxide followed by silance conditioning. Thus, the highest values of bond strength of endodontic posts to the resin-matrix cements were recorded when a combined physico-chemical approach was assessed. Non-treated surfaces showed the lowest bond strength values between 5 to and 9 MPa. Surface analyses of GFRC posts showed an increased roughness after grit-blasting or etching that promoted a mechanical interlocking of the adhesive and resin-matrix cements. CONCLUSION: The combined treatment of glass fiber-reinforced resin composite post surfaces by physical and chemical methods can promote the increase in roughness and chemical functionalization of the surfaces prior to cementation., That results in a high mechanical interlocking of the resin-matrix cements and a stable retention of the teeth root intracanal posts. CLINICAL RELEVANCE: Combining chemical and physical modification methods of surfaces can provide the most promising adhesion-enhancing pathways of GFRC posts to resin-matrix cements, that can decrease the risk of clinical failures by fracture and detachment of endodontic posts.

All Patient Refined-Diagnosis Related Groups' (APR-DRGs) Severity of Illness and Risk of Mortality as predictors of in-hospital mortality.

The aims of this study were to assess All-Patient Refined Diagnosis-Related Groups' (APR-DRG) Severity of Illness (SOI) and Risk of Mortality (ROM) as predictors of in-hospital mortality, comparing with Charlson Comorbidity Index (CCI) and Elixhauser Comorbidity Index (ECI) scores. We performed a retrospective observational study using mainland Portuguese public hospitalizations of adult patients from 2011 to 2016. Model discrimination (C-statistic/ area under the curve) and goodness-of-fit (R-squared) were calculated. Our results comprised 4,176,142 hospitalizations with 5.9% in-hospital deaths. Compared to the CCI and ECI models, the model considering SOI, age and sex showed a statistically significantly higher discrimination in 49.6% (132 out of 266) of APR-DRGs, while in the model with ROM that happened in 33.5% of APR-DRGs. Between these two models, SOI was the best performer for nearly 20% of APR-DRGs. Some particular APR-DRGs have showed good discrimination (e.g. related to burns, viral meningitis or specific transplants). In conclusion, SOI or ROM, combined with age and sex, perform better than more widely used comorbidity indices. Despite ROM being the only score specifically designed for in-hospital mortality prediction, SOI performed better. These findings can be helpful for hospital or organizational models benchmarking or epidemiological analysis.

Remnant oral biofilm and microorganisms after autoclaving sterilization of retrieved healing abutments.

OBJECTIVE: The purpose of this study was to evaluate the sterilization effectiveness against biofilms on retrieved healing abutments used in implant dentistry. BACKGROUND: A large number of clinicians reuse healing abutments to decrease treatment costs although it can promote infection due to the presence of remnant biofilm biomass. METHODS: One hundred and eighty-five titanium healing abutments previously used for 3 months in oral cavity were assessed in this study. Abutments were submitted to cleaning, chemical disinfection, and autoclave sterilization according to clinical guidelines. The abutments were aseptically placed into glass tubes containing specific bacterial growth medium and then incubated for 10 days. From glass tubes with bacterial growth, 100 µl medium was transferred to Schaedler's agar for morphological identification and counting of strict anaerobes and to Columbia blood agar for presumptive identification of facultative anaerobes after incubation. Isolated strains were then identified at species level by enzymatic and biochemical tests within API microorganism detection platform. Also, polymerase chain reaction (PCR) was performed for identification of undefined strains. RESULTS: After the standard cleaning and sterilization procedures, fifty-six (approximately 30%) retrieved abutments showed the presence of remnant biofilm biomass. The bacteria identified into the remnant biofilms covering the abutments were representative of the commensal oral microbiota including Aggregatibacter actinomycetemcomitans, Prevotella intermedia, and Enterococcus faecalis. CONCLUSION: Although some healing abutments did not reveal the existence of bacteria, organic components from biofilm biomass are still strongly adhered on the retentive micro-regions and surfaces of abutments and therefore that would support the accumulation of biofilm including pathogenic species leading to patients' cross-infections. Further studies should be performed on the assessment of different materials, design, and connections of the healing abutments associated with clinical disinfection procedures in implant dentistry.

Risk factors and their contribution to population health in the European Union (EU-28) countries in 2007 and 2017.

BACKGROUND: The Global Burden of Disease (GBD) study has generated a wealth of data on death and disability outcomes in Europe. It is important to identify the disease burden that is attributable to risk factors and, therefore, amenable to interventions. This paper reports the burden attributable to risk factors, in deaths and disability-adjusted life years (DALYs), in the 28 European Union (EU) countries, comparing exposure to risks between them, from 2007 to 2017. METHODS: Retrospective descriptive study, using secondary data from the GBD 2017 Results Tool. For the EU-28 and each country, attributable (all-cause) age-standardized death and DALY rates, and summary exposure values are reported. RESULTS: In 2017, behavioural and metabolic risk factors showed a higher attributable burden compared with environmental risks, with tobacco, dietary risks and high systolic blood pressure standing out. While tobacco and air quality improved significantly between 2007 and 2017 in both exposure and attributable burden, others such as childhood maltreatment, drug use or alcohol use did not. Despite significant heterogeneity between EU countries, the EU-28 burden attributable to risk factors decreased in this period. CONCLUSION: Accompanying the improvement of population health in the EU-28, a comparable trend is visible for attributable burden due to risk factors. Besides opportunities for mutual learning across countries with different disease/risk factors patterns, good practices (i.e. tobacco control in Sweden, air pollution mitigation in Finland) might be followed. On the opposite side, some concerning cases must be highlighted (i.e. tobacco in Bulgaria, Latvia and Estonia or drug use in Czech Republic).

Cytotoxic effects of submicron- and nano-scale titanium debris released from dental implants: an integrative review.

OBJECTIVE: This integrative review aimed to report the toxic effect of submicron and nano-scale commercially pure titanium (cp Ti) debris on cells of peri-implant tissues. MATERIALS AND METHODS: A systematic search was carried out on the PubMed electronic platform using the following key terms: Ti "OR" titanium "AND" dental implants "AND" nanoparticles "OR" nano-scale debris "OR" nanometric debris "AND" osteoblasts "OR "cytotoxicity" OR "macrophage" OR "mutagenic" OR "peri-implantitis". The inclusion criteria involved articles published in the English language, until December 26, 2020, reporting the effect of nano-scale titanium particles as released from dental implants on the toxicity and damage of osteoblasts. RESULTS: Of 258 articles identified, 14 articles were selected for this integrative review. Submicron and nano-scale cp Ti particles altered the behavior of cells in culture medium. An inflammatory response was triggered by macrophages, fibroblasts, osteoblasts, mesenchymal cells, and odontoblasts as indicated by the detection of several inflammatory mediators such as IL-6, IL-1ß, TNF-α, and PGE2. The formation of a bioactive complex composed of calcium and phosphorus on titanium nanoparticles allowed their binding to proteins leading to the cell internalization phenomenon. The nanoparticles induced mutagenic and carcinogenic effects into the cells. CONCLUSIONS: The cytotoxic effect of debris released from dental implants depends on the size, concentration, and chemical composition of the particles. A high concentration of particles on nanometric scale intensifies the inflammatory responses with mutagenic potential of the surrounding cells. CLINICAL RELEVANCE: Titanium ions and debris have been detected in peri-implant tissues with different size, concentration, and forms. The presence of metallic debris at peri-implant tissues also stimulates the migration of immune cells and inflammatory reactions. Cp Ti and TiO2 micro- and nano-scale particles can reach the bloodstream, accumulating in lungs, liver, spleen, and bone marrow.

The resin-matrix cement layer thickness resultant from the intracanal fitting of teeth root canal posts: an integrative review.

OBJECTIVE: The aim of this study was to perform an integrative review on the layer thickness and microstructure of resin-matrix cements around custom-made or standard teeth root intracanal posts. MATERIALS AND METHODS: An electronic search was conducted on the PubMed using a combination of the following scientific terms: intraradicular post, root intracanal post, resin cement, thickness, adaptation, endodontic post, layer thickness, fit, shape, and endodontic core. The literature selection criteria accepted articles published in the English language, up to May 2021, involving in vitro analyses, meta-analyses, randomized controlled trials, and prospective cohort studies. RESULTS: The search identified 154 studies, of which 24 were considered relevant to this study. The selected studies provided important data considering cement layer thickness, tooth preparation, endodontic post, and type of resin-matrix cement. The anatomical variability of root canal systems, such as the oval- or C-shaped, represents a challenge in dental restoration with tooth root intracanal posts. The fitting of intracanal posts to different root regions is variable resulting in thick and irregular layers of resin-matrix cement. Defects like pores, micro-cracks, and micro-gaps were detected in the resin-matrix cement microstructure and represent spots of stress concentration and fracture. Custom-made tooth root intracanal posts provide a proper fitting and decrease the layer thickness of resin-matrix cement. CONCLUSIONS: In fact, the layer thickness of resin-matrix cements depends on the fitting of endodontic posts to tooth root canals. An increase of resin cement thickness causes the appearance of defects like pores, micro-cracks, and micro-gaps that can induce stress concentration and fractures at interfaces. CLINICAL RELEVANCE: The fitting of the endodontic post into the teeth root canal determine the layer thickness of the resin-matrix cement to establish an adequate retention. However, the increase in the thickness of the resin-matrix cement layer can lead to a high number of defects like pores or cracks and therefore decrease the strength of the interface.

The influence of zirconia veneer thickness on the degree of conversion of resin-matrix cements: an integrative review.

OBJECTIVE: The main aim of this study was to conduct an integrative review on the influence of the zirconia veneer thickness on the degree of conversion of resin-matrix cements. MATERIALS AND METHOD: An electronic search was performed on PubMed using a combination of the following search items: zirconia, thickness, veneer, degree of conversion, resin cement, light curing, and polymerization. Articles published in the English language, up to July 2020, were included regarding the influence of ceramic veneer thickness on the degree of conversion of resin-matrix cements. Randomized controlled trials and prospective cohort studies were also evaluated. RESULTS: Of the 21 selected studies, 9 investigated the light-curing effect, while five other articles evaluated the ceramic translucency. Three studies evaluated the degree of conversion of the resin-matrix cement while four articles assessed the veneer thickness. Results revealed a significant decrease of light transmission through the zirconia with a thickness ranging from 0.1 up to 1.5 mm. However, the ultra-thin thickness around 0.1 and 0.3 mm allowed a full polymerization of the dual-curing resin-matrix cement resulting in the integrity of the interface properties. The light-curing process of resin-matrix cements is also affected by the shade, chemical composition, and microstructure of zirconia and resin cement. Optimal conditions of light-curing are required to reach the threshold intensity of light and energy for polymerization of resin-matrix cements. CONCLUSIONS: The increase in zirconia veneer thickness negatively affects the degree of conversion of resin-matrix cements. Also, shade and microstructure are key factor to improve the light curing of resin cements. CLINICAL RELEVANCE: Clinicians should consider the zirconia thickness on resin-based cementation since a higher veneer thickness can negatively affect the light irradiation intensity towards the dual-curing resin-matrix cement. Thus, the degree of conversion of the resin-matrix cement can decrease leading to a low chemical stability (e.g., color instability) and poor mechanical properties.

Design of Ultrasonic Synthetic Aperture Imaging Systems Based on a Non-Grid 2D Sparse Array.

This work provides a guide to design ultrasonic synthetic aperture systems for non-grid two-dimensional sparse arrays such as spirals or annular segmented arrays. It presents an algorithm that identifies which elements have a more significant impact on the beampattern characteristics and uses this information to reduce the number of signals, the number of emitters and the number of parallel receiver channels involved in the beamforming process. Consequently, we can optimise the 3D synthetic aperture ultrasonic imaging system for a specific sparse array, reducing the computational cost, the hardware requirements and the system complexity. Simulations using a Fermat spiral array and experimental data based on an annular segmented array with 64 elements are used to assess this algorithm.