Significant Enhancement of Thermoelectric Performance in Bi0.5 Sb1.5 Te3 Thin Film via Ferroelectric Polarization Engineering.

The Bi0.5 Sb1.5 Te3 (BST) thin film shows great promise in harvesting low-grade heat energy due to its excellent thermoelectric performance at room temperature. In order to further enhance its thermoelectric performance, specifically the power factor and output power, new approaches are highly desirable beyond the common "composition-structure-performance" paradigm. This study introduces ferroelectric polarization engineering as a novel strategy to achieve these goals. A Pb(Zr0.52 Ti0.48 )O3 /Bi0.5 Sb1.5 Te3 (PZT/BST) hybrid film is fabricated via magnetron sputtering. Density functional theory calculations demonstrate PZT polarization's influence on charge redistribution and interlayer charge transfer at the PZT/BST interface, facilitating adjustable carrier transport behavior and power factor of the BST film. As a result, a 26.7% enhancement of the power factor, from unpolarized 12.0 to 15.2 µW cm-1 K-2 , is reached by 2 kV out-of-plane downward polarization of PZT. Furthermore, a five-leg generator constructed using this PZT/BST hybrid film exhibits a maximum output power density of 13.06 W m-2 at ΔT = 39 K, which is 20.8% higher than that of the unpolarized one (10.81 W m-2 ). The research presents a new approach to enhance thermoelectric thin films' power factor and output performance by introducing ferroelectric polarization engineering.

Continuous Sound Velocity Measurements along the Shock Hugoniot Curve of Quartz.

We report continuous measurements of the sound velocity along the principal Hugoniot curve of α quartz between 0.25 and 1.45 TPa, as determined from lateral release waves intersecting the shock front as a function of time in decaying-shock experiments. The measured sound velocities are lower than predicted by prior models, based on the properties of stishovite at densities below ∼7 g/cm^{3}, but agree with density functional theory molecular dynamics calculations and an empirical wide-regime equation of state presented here. The Grüneisen parameter calculated from the sound velocity decreases from γ∼1.3 at 0.25 TPa to 0.66 at 1.45 TPa. In combination with evidence for increased (configurational) specific heat and decreased bulk modulus, the values of γ suggest a high thermal expansion coefficient at ∼0.25-0.65 TPa, where SiO_{2} is thought to be a bonded liquid. From our measurements, dissociation of the molecular bonds persists to ∼0.65-1.0 TPa, consistent with estimates by other methods. At higher densities, the sound velocity is close to predictions from previous models, and the Grüneisen parameter approaches the ideal gas value.

Coupled-resonator-induced plasmonic bandgaps.

By drawing an analogy with the conventional photonic crystals, the plasmonic bandgaps have mainly employed the periodic metallic structures, named as plasmonic crystals. However, the sizes of the plasmonic crystals are much larger than the wavelengths, and the large sizes considerably decrease the density of the photonic integration circuits. Here, based on the coupled-resonator effect, the plasmonic bandgaps are experimentally realized in the subwavelength waveguide-resonator structure, which considerably decreases the structure size to subwavelength scales. An analytic model and the phase analysis are established to explain this phenomenon. Both the experiment and simulation show that the plasmonic bandgap structure has large fabrication tolerances (>20%). Instead of the periodic metallic structures in the bulky plasmonic crystals, the utilization of the subwavelength plasmonic waveguide-resonator structure not only significantly shrinks the bandgap structure to be about λ2/13, but also expands the physics of the plasmonic bandgaps. The subwavelength dimension, together with the waveguide configuration and robust realization, makes the bandgap structure easy to be highly integrated on chips.

Visible-Frequency Dielectric Metasurfaces for Multiwavelength Achromatic and Highly Dispersive Holograms.

Dielectric metasurfaces built up with nanostructures of high refractive index represent a powerful platform for highly efficient flat optical devices due to their easy-tuning electromagnetic scattering properties and relatively high transmission efficiencies. Here we show visible-frequency silicon metasurfaces formed by three kinds of nanoblocks multiplexed in a subwavelength unit to constitute a metamolecule, which are capable of wavefront manipulation for red, green, and blue light simultaneously. Full phase control is achieved for each wavelength by independently changing the in-plane orientations of the corresponding nanoblocks to induce the required geometric phases. Achromatic and highly dispersive meta-holograms are fabricated to demonstrate the wavefront manipulation with high resolution. This technique could be viable for various practical holographic applications and flat achromatic devices.

Tuning Fano resonances with a nano-chamber of air.

By designing a polymer-film-coated asymmetric metallic slit structure that only contains one nanocavity side-coupled with a subwavelength plasmonic waveguide, the Fano resonance is realized in the experiment. The Fano resonance originates from the interference between the narrow resonant spectra of the radiative light from the nanocavity and the broad nonresonant spectra of the directly transmitted light from the slit. The lateral dimension of the asymmetric slit is only 825 nm. Due to the presence of the soft polymer film, a nano-chamber of air is constructed. Based on the opto-thermal effect, the air volume in the nano-chamber is expanded by a laser beam, which blueshifts the Fano resonance. This tunable Fano resonance in such a submicron slit structure with a nano-chamber is of importance in the highly integrated plasmonic circuits.

Controlling surface-plasmon-polaritons launching with hot spot cylindrical waves in a metallic slit structure.

Plasmonic nanostructures, which are used to generate surface plasmon polaritons (SPPs), always involve sharp corners where the charges can accumulate. This can result in strong localized electromagnetic fields at the metallic corners, forming the hot spots. The influence of the hot spots on the propagating SPPs are investigated theoretically and experimentally in a metallic slit structure. It is found that the electromagnetic fields radiated from the hot spots, termed as the hot spot cylindrical wave (HSCW), can greatly manipulate the SPP launching in the slit structure. The physical mechanism behind the manipulation of the SPP launching with the HSCW is explicated by a semi-analytic model. By using the HSCW, unidirectional SPP launching is experimentally realized in an ultra-small metallic step-slit structure. The HSCW bridges the localized surface plasmons and the propagating surface plasmons in an integrated platform and thus may pave a new route to the design of plasmonic devices and circuits.

Plasmonic ridge waveguides with deep-subwavelength outside-field confinements.

Subwavelength plasmonic waveguides are the most promising candidates for developing planar photonic circuitry platforms. In this study a subwavelength metallic ridge waveguide is numerically and experimentally investigated. Differing from previous plasmonic waveguides, the metallic strip of the subwavelength ridge waveguide is placed on a thick metal film. It is found that the surface-plasmon-polariton (SPP) waveguide modes result from the coupling of the corner modes in the two ridge corners. The bottom metal film has a great influence on the SPP modes, and nearly all the evanescent fields of the SPP modes are tightly confined outside the ridge waveguide. Simulations show that 50% of the total power flow in the SPP mode can be confined outside the ridge waveguide with an area of only about λ (2)/20. The propagation length is still about 10 times the plasmon wavelength. Through comparison with a metallic strip placed directly on the dielectric substrate, the proposed ridge waveguide exhibits a much higher sensing performance. This plasmonic ridge waveguide with deep-subwavelength outside-field confinements is of significance in a range of nano-optics applications, especially in nanosensing.

Efficient directional excitation of surface plasmons by a single-element nanoantenna.

Directional light scattering is important in basic research and real applications. This area has been successfully downscaled to wavelength and subwavelength scales with the development of optical antennas, especially single-element nanoantennas. Here, by adding an auxiliary resonant structure to a single-element plasmonic nanoantenna, we show that the highly efficient lowest-order antenna mode can be effectively transferred into inactive higher-order modes. On the basis of this mode conversion, scattered optical fields can be well manipulated by utilizing the interference between different antenna modes. Both broadband directional excitation of surface plasmon polaritons (SPPs) and inversion of SPP launching direction at different wavelengths are experimentally demonstrated as typical examples. The proposed strategy based on mode conversion and mode interference provides new opportunities for the design of nanoscale optical devices, especially directional nanoantennas.

Ultra-small wavelength splitters in a subwavelength plasmonic waveguide.

Miniaturizing optical devices beyond the diffraction limit is of great importance for high-integration photonic circuits. By directly fabricating a double-slit aperture structure of different sizes in a subwavelength plasmonic waveguide, an ultra-small plasmonic wavelength splitter is realized experimentally. Due to the different slit widths, the surface plasmon polaritons (SPPs) in the opposite directions exhibit anti-phase interferences. As a result, the SPPs excited at different wavelengths can be split to propagate in the opposite directions along the subwavelength plasmonic waveguide. The plasmonic wavelength splitter only occupies a footprint of about 1.4 µm² on the metal surface, and the splitting wavelengths and their separation can be easily varied by adjusting the structural parameters. This provides it with important applications in the areas of the optical modulating, sensing, and computing networks in highly integrated plasmonic circuits.

An ultrahigh-contrast and broadband on-chip refractive index sensor based on a surface-plasmon-polariton interferometer.

Using a double-slit structure fabricated on a gold film or a subwavelength (300 nm) plasmonic waveguide, high-contrast and broadband plasmonic sensors based on the interference of surface plasmon polaritons (SPPs) are experimentally demonstrated on chips. By adjusting the focused spot position of the p-polarized incident light on the double-slit structure to compensate for the propagation loss of the SPPs, the interfering SPPs from the two slits have nearly equal intensities. As a result, nearly completely destructive interference can be experimentally achieved in a broad bandwidth (>200 nm), revealing the robust design and fabrication of the double-slit structure. More importantly, a high sensing figure of merit (FOM*) of >1 × 10(4) RIU(-1) (refractive index unit), which is much greater than the previous experimental results, is obtained at the destructive wavelength because of a high contrast ratio (C = 0.96). The high-contrast and broadband on-chip sensor fabricated on the subwavelength plasmonic waveguide may find important applications in the real-time sensing of particles and molecules.

Fano resonances in a single defect nanocavity coupled with a plasmonic waveguide.

Two Fano resonances are theoretically predicted in a single defect nanocavity, consisting of a rectangular cavity with a small stub defect, side-coupled with a plasmonic waveguide. These two Fano resonances are found to originate from two different mechanisms. One is caused by the excitation of a high-order resonant mode in the rectangular cavity owing to the structural breaking, and the other is attributed to the inherent resonant mode in the small stub defect. The narrow high-order mode and inherent mode couple with the broad low-order resonant mode in the rectangular cavity, giving rise to two Fano resonances. Because of the different origins, these two Fano resonances exhibit quite different responses to the variations of the structural dimensions. This has important applications in highly sensitive and multiparameter sensing in the complicated environments.

Enhancing Thermoelectric and Cooling Performance of Bi0.5Sb1.5Te3 through Ferroelectric Polarization in Flexible Ag/PZT/PVDF/Bi0.5Sb1.5Te3 Film.

Bi2Te3-based thin films are gaining recognition for their remarkable room temperature thermoelectric performance. Beyond the conventional "process-composition-performance" paradigm, it is highly desirable to explore new methods to enhance their performance further. Here, we designed a sandwich-structured Ag/PZT/PVDF/Bi0.5Sb1.5Te3(BST) thin film device and effectively regulated the performance of the BST film by controlling the polarization state of the PZT/PVDF layers. Results indicate that polarization induces interlayer charge redistribution and charge transfer between PZT/PVDF and BST, thereby achieving the continuous modulation of the electrical transport characteristics of BST films. Finally, following polarization at a saturation voltage of 3 kV, the power factor of the BST film increased by 13% compared to the unpolarized condition, reaching 20.8 µW cm-1 K-2. Furthermore, a device with 7 pairs of P-N legs was fabricated, achieving a cooling temperature difference of 11.0 K and a net cooling temperature difference of 2.4 K at a current of 10 mA after the saturation polarization of the PZT/PVDF layer. This work reveals the critical effect of introducing ferroelectric layer polarization to achieve excellent thermoelectric performance of the BST film.

Thermal pattern of Tatun volcanic system by satellite-observed temperatures and its correlation with earthquake magnitudes.

The land surface temperature (LST) of volcanoes detected from satellite sensors reflects the thermal status of heat sources in the subsurface. Volcanic earthquakes occur as magma and volcanic fluids transport to the surface from depth. Thus, both LST and earthquake magnitude are key parameters to the study of active volcanoes. Here we investigate the volcanic status of Tatun Volcanic Group (TVG) based on LST and seismic observations. The Earth-observing satellites onboard thermal sensor derived land surface temperature, and the seismic records retrieved volcanic earthquake magnitude are used to delineate the past and current pattern of volcanic activity plus the future trend of the TVG. The spatiotemporal distribution of LST and volcanic earthquake magnitude in TVG are analyzed. The high-similarity trends of the 4-decade LST time series and 3-decade earthquake magnitude time series are inspected. The retrieved surface thermal pattern shows the non-steady-state nature of the subsurface thermal sources at this volcanic complex. The LST trend exhibits a rather positive correlation with the energy released from volcanic earthquakes and consequently, the presumption on the connection between LSTs and earthquakes is validated.

Three-dimensional ordered macroporous molybdenum doped NiCoP honeycomb electrode for two-step water electrolysis.

Two-step alkaline water electrolysis is considered a safe and efficient method for producing hydrogen from renewable energy. Reversal of the current polarity in a bifunctional electrocatalyst used as a gas evolution electrode (GEE) in two-step water electrolysis can generate H2/O2 at different times and in different spaces. The design of a bifunctional electrocatalyst with high durability and excellent activity is imperative to achieving continuous, safe, and pure H2 generation via two-step alkaline water electrolysis. Here, we present for the first time a novel 3D Mo-doped NiCo phosphide honeycomb electrocatalyst that was grown on nickel foam (3D Mo-NiCoP/NF) and fabricated using polystyrene as a template. The electrocatalyst exhibited extremely low overpotentials in both the hydrogen evolution reaction (HER; 117 mV at 10 mA/cm2) and the oxygen evolution reaction (OER; 344 mV at 100 mA/cm2). As a bifunctional electrocatalyst for two-step alkaline water electrolysis, the device had a 1.784 V cell voltage at 10 mA/cm2, 95% decoupling efficiency, and ∼83% energy conversion efficiency. Taken together, the use of 3D Mo-NiCoP/NF as a GEE reduced the complexity and lowered the cost of the electrolyzer. The latter could be used to construct highly competitive water-splitting systems for continuous H2 production and green energy harvesting.

High buffering capacity cobalt-doped nickel hydroxide electrode as redox mediator for flexible hydrogen evolution by two-step water electrolysis.

Two-step water electrolysis has been proposed to tackle the ticklish H2/O2 mixture problems in conventional alkaline water electrolysis recently. However, low buffering capacity of pure nickel hydroxide electrode as redox mediator limited practical application of two-step water electrolysis system. A high-capacity redox mediator (RM) is urgently needed to permit consecutive operation of two-step cycles and high-efficiency hydrogen evolution. Consequently, a high mass-loading cobalt-doped nickel hydroxide/active carbon cloth (NiCo-LDH/ACC) RM is synthesized via a facile electrochemical method. The proper Co doping can apparently enhance the conductivity and simultaneously remain the high-capacity of the electrode. Density functional theory results further confirms more negative values in redox potential of NiCo-LDH/ACC than Ni(OH)2/ACC on account of the charge redistribution induced by Co doping, which can prevent the parasitic O2 evolution on RM electrode during decoupled H2 evolution step. As a result, the NiCo-LDH/ACC combined the superiorities of high-capacity Ni(OH)2/ACC and high-conductivity Co(OH)2/ACC, and the NiCo-LDH/ACC with 4:1 ratio of Ni to Co presented a large specific capacitance of 33.52F/cm2 for reversible charge-discharge and high buffering capacity with two-step H2/O2 evolution duration of 1740 s at 10 mA/cm2. The necessary input voltage (2.00 V) of the whole water electrolysis was broken into two smaller ones, 1.41 and 0.38 V, for H2 and O2 production, respectively. NiCo-LDH/ACC provided a favorable electrode material for the practical application of two-step water electrolysis system.

Tracking interface position of a high-speed imploding composite liner based on magnetic diffusion difference.

A technique for tracking the interface position of non-metal-metal composite liners during high-speed implosion is proposed in this paper. Based on the magnetic diffusion difference between metal and non-metal, the interface position information is obtained by measuring magnetic fields in the cavity of the liner. An efficient magnetic flux estimation algorithm based on iterative magnetic diffusion simulation is also proposed to estimate the magnetic flux loss of the liner. Numerical experiments show that the estimation algorithm can reduce the relative error to less than 0.5%. The composite solid liner experimental results show that the maximum error is about 2% under imperfect experimental conditions. Detailed analysis suggests that this method can be widely applied to non-metallic sample materials (electrical conductivity is less than 103 ∼ 104 S/m). The technique provides a useful supplement to the existing interface diagnosis methods for high-speed implosion liners.

Development of a transient complex impedance measurement device used in quasi-isentropic compression experiments.

A complex impedance measurement device with a short response time and high noise immunity is presented in this paper. The device based on a radio-frequency reflectometer was specially developed for electro-physical property investigations of materials in quasi-isentropic compression experiments. The maximum operating frequency of the device is up to 600 MHz for reducing intense low-frequency noises. Meanwhile, an off-line signal processing code was developed to improve the response time of the device to less than 10 ns. Using the device, the complex impedance and electrical conductivity of water compressed by an explosive-driven magnetic flux compression generator were measured, and an abrupt change in the complex impedance of water caused by a liquid-solid transition was directly observed under intense electromagnetic interference.

A compact pulsed power driver with precisely shaped current waveforms for magnetically driven loading experiments.

Magnetically driven loading techniques based on high current pulsed power drivers are very important tools for researching material dynamic behaviors and high-pressure physics. Based on the technologies of a Marx generator energy storage and low impedance coaxial cable energy transmission, a compact high current pulsed power driver CQ-7 was developed and established at the Institute of Fluid Physics, China Academy of Engineering Physics, which can generate precisely shaped current waveforms for magnetically driven loading experiments. CQ-7 is composed of 256 two-stage Marx generators in parallel with low impedance, high voltage coaxial cables for current output. The 256 Marx generators are divided into 16 groups, and each separate group can be individually triggered to discharge and shape currents in sequence by a low jitter, high voltage pulse trigger with 16 output signals. The electrical parameters of CQ-7 are a capacitance of 20.48 µF, an inductance of 4.12 nH, and a resistance of 3.35 mΩ in a short circuit. When working at the charging voltage of ±40-±60 kV, CQ-7 can deliver a peak current from 5 to 7 MA to the short-circuit loads with a rising time of 400-700 ns at different discharging time sequences. Two different experiments were conducted to test the performance of CQ-7: magnetically driven high velocity flyer plates and solid liner implosion. The results show that CQ-7 can accelerate the aluminum flyer plate with a size of 12 × 8 × 1 mm3 to more than 7.5 km/s and uniformly drive the aluminum liner with an inner diameter of 6.2 mm and a thickness of 0.4 mm to more than 9.5 km/s. Furthermore, these experiments indicate that CQ-7 is a robust platform for material dynamics and high-pressure physics.

A compact platform for the investigation of material dynamics in quasi-isentropic compression to ~ 19 GPa.

This paper reports on the development of a magnetically driven high-velocity implosion experiment conducted on the CQ-3 facility, a compact pulsed power generator with a load current of 2.1 MA. The current generates a high Lorentz force between inner and outer liners made from 2024 aluminum. Equally positioned photonic Doppler velocimetry probes record the liner velocities. In experiment CQ3-Shot137, the inner liner imploded with a radial converging velocity of 6.57 km/s while the outer liner expanded at a much lower velocity. One-dimensional magneto-hydrodynamics simulation with proper material models provided curves of velocity versus time that agree well with the experimental measurements. Simulation then shows that the inner liner underwent a shock-less compression to approximately 19 GPa and reached an off-Hugoniot high-pressure state. According to the scaling law that the maximum loading pressure is proportional to the square of the load current amplitude, the results demonstrate that such a compact capacitor bank as CQ-3 has the potential to generate pressure as high as 100 GPa within the inner liner in such an implosion experiment. It is emphasized that the technique described in this paper can be easily replicated at low cost.

Hydrogen Clathrate Structures in Uranium Hydrides at High Pressures.

Room-temperature superconductivity has always been an area of intensive research. Recent findings of clathrate metal hydrides structures have opened up the doors for achieving room-temperature superconductivity in these materials. Here, we report first-principles calculations for stable H-rich clathrate structures of uranium hydrides at high pressures. The clathrate uranium hydrides contain H cages with stoichiometries of H24, H29, and H32, in which H atoms are bonded covalently to other H atoms, and U atoms occupy the centers of the cages. Especially, a UH10 clathrate structure containing H32 cages is predicted to have an estimated T c higher than 77 K at high pressures.