Gut Microbiome Associating with Carbon and Nitrogen Metabolism during Biodegradation of Polyethene in Tenebrio larvae with Crop Residues as Co-Diets.

Tenebrio molitor and Tenebrio obscurus (Coleoptera: Tenebrionidae) larvae are two commercial insects that eat plant and crop residues as diets and also biodegrade synthetic plastics polyethylene (PE). We examined biodegradation of low-density PE (LDPE) foam (Mn = 28.9 kDa and Mw = 342.0 kDa) with and without respective co-diets, i.e., wheat brain (WB) or corn flour (CF), corn straw (CS), and rice straw (RS) at 4:1 (w/w), and their gut microbiome and genetic metabolic functional groups at 27.0 ± 0.5 °C after 28 days of incubation. The presence of co-diets enhanced LDPE consumption in both larvae and broad-depolymerized the ingested LDPE. The diet type shaped gut microbial diversity, potential pathways, and metabolic functions. The sequence of effectiveness of co-diets was WB or CF > CS > RS for larval development and LDPE degradation. Co-occurrence networks indicated that the larvae co-fed with LDPE displayed more complex correlations of gut microbiome than the larvae fed with single diets. The primary diet of WB or CF and crop residues CS and RS provided energy and nitrogen source to significantly enhance LDPE biodegradation with synergistic activities of the gut microbiota. For the larvae fed LDPE and LDPE plus co-diets, nitrogen fixation function was stimulated compared to normal diets and associated with LDPE biodegradation.

Synergistic analysis of performance, functional genes, and microbial community assembly in SNDPR process under Zn(II) stress.

One of the most prevalent heavy metals found in rural sewage is Zn(II), while its effect on simultaneous nitrification, denitrification and phosphorus removal (SNDPR) remains unclear. In this work, the responses of SNDPR performance to long-term Zn(II) stress were investigated in a cross-flow honeycomb bionic carrier biofilm system. The results indicated that Zn(II) stress at 1 and 5 mg L-1 could increase nitrogen removal. Maximum ammonia nitrogen, total nitrogen, and phosphorus removal efficiencies of up to 88.54%, 83.19%, and 83.65% were obtained at Zn(II) concentration of 5 mg L-1. The functional genes, such as archaeal amoA, bacterial amoA, NarG, NirS, NapA, and NirK, also reached the highest value at 5 mg L-1 Zn(II), with the absolute abundances of 7.73 × 105, 1.57 × 106, 6.68 × 108, 1.05 × 109, 1.79 × 108, and 2.09 × 108 copies·g-1 dry weight, respectively. The neutral community model demonstrated that deterministic selection was responsible for the system's microbial community assembly. Additionally, response regimes with extracellular polymeric substances and cooperation among microorganisms facilitated the stability of the reactor effluent. Overall, the findings of this paper contribute to improving the efficiency of wastewater treatment.

Competitive Adsorption: Reducing the Poisoning Effect of Adsorbed Hydroxyl on Ru Single-Atom Site with SnO2 for Efficient Hydrogen Evolution.

Ruthenium (Ru) has been theoretically considered a viable alkaline hydrogen evolution reaction electrocatalyst due to its fast water dissociation kinetics. However, its strong affinity to the adsorbed hydroxyl (OHad ) blocks the active sites, resulting in unsatisfactory performance during the practical HER process. Here, we first reported a competitive adsorption strategy for the construction of SnO2 nanoparticles doped with Ru single-atoms supported on carbon (Ru SAs-SnO2 /C) via atomic galvanic replacement. SnO2 was introduced to regulate the strong interaction between Ru and OHad by the competitive adsorption of OHad between Ru and SnO2 , which alleviated the poisoning of Ru sites. As a consequence, the Ru SAs-SnO2 /C exhibited a low overpotential at 10 mA cm-2 (10 mV) and a low Tafel slope of 25 mV dec-1 . This approach provides a new avenue to modulate the adsorption strength of active sites and intermediates, which paves the way for the development of highly active electrocatalysts.

Thiophene-Based Conjugated Acetylenic Polymers with Dual Active Sites for Efficient Co-Catalyst-Free Photoelectrochemical Water Reduction in Alkaline Medium.

Although being attractive materials for photoelectrochemical hydrogen evolution reaction (PEC HER) under neutral or acidic conditions, conjugated polymers still show poor PEC HER performance in alkaline medium due to the lack of water dissociation sites. Herein, we demonstrate that tailoring the polymer skeleton from poly(diethynylthieno[3,2-b]thiophene) (pDET) to poly(2,6-diethynylbenzo[1,2-b:4,5-b']dithiophene (pBDT) and poly(diethynyldithieno[3,2-b:2',3'-d]thiophene) (pDTT) in conjugated acetylenic polymers (CAPs) introduces highly efficient active sites for water dissociation. As a result, pDTT and pBDT, grown on Cu substrate, demonstrate benchmark photocurrent densities of 170 µA cm-2 and 120 µA cm-2 (at 0.3 V vs. RHE; pH 13), which are 4.2 and 3 times higher than that of pDET, respectively. Moreover, by combining DFT calculations and electrochemical operando resonance Raman spectroscopy, we propose that the electron-enriched Cß of the outer thiophene rings of pDTT are the water dissociation active sites, while the -C≡C- bonds function as the active sites for hydrogen evolution.

Molecular Engineering of Conjugated Acetylenic Polymers for Efficient Cocatalyst-free Photoelectrochemical Water Reduction.

Conjugated polymers featuring tunable band gaps/positions and tailored active centers, are attractive photoelectrode materials for water splitting. However, their exploration falls far behind their inorganic counterparts. Herein, we demonstrate a molecular engineering strategy for the tailoring aromatic units of conjugated acetylenic polymers from benzene- to thiophene-based. The polarized thiophene-based monomers of conjugated acetylenic polymers can largely extend the light absorption and promote charge separation/transport. The C≡C bonds are activated for catalyzing water reduction. Using on-surface Glaser polycondensation, as-fabricated poly(2,5-diethynylthieno[3,2-b]thiophene) on commercial Cu foam exhibits a record H2 -evolution photocurrent density of 370 µA cm-2 at 0.3 V vs. reversible hydrogen electrode among current cocatalyst-free organic photocathodes (1-100 µA cm-2 ). This approach to modulate the optical, charge transfer, and catalytic properties of conjugated polymers paves a critical way toward high-activity organic photoelectrodes.

Carbon Nanozymes: Enzymatic Properties, Catalytic Mechanism, and Applications.

Nanozymes have advantages over natural enzymes, such as facile production on large scale, long storage time, low costs, and high stability in harsh environments. Carbon nanomaterials (CNMs), including fullerenes, carbon nanotubes, graphene, carbon quantum dots, and graphene quantum dots, have become a star family in materials science. As a new class of nanozymes, the catalytic activity of CNMs and their hybrids has been extensively reported. In this Minireview, recent progress of CNMs based artificial enzymes, focusing on those with peroxidase-like activity, has been summarized. The enzymatic properties, catalytic mechanisms, and novel applications of CNM nanozymes in sensing, therapy, and environmental engineering are discussed in detail. Additionally, we also highlight the remaining challenges and unsolved problems. With the fast development of bionanotechnology, the unique enzymatic properties and advantages of CNM nanozymes have received much attention and will continue to be an active and challenging field for the years to come.

Mesoporous Encapsulated Chiral Nanogold for Use in Enantioselective Reactions.

Although various nanomaterials have been designed for biocatalysis, few of them can accelerate chemical reactions with high selectivity and stereocontrol, which remains them from being perfect alternatives to nature enzymes. Herein, inspired by the natural enzymes, an enantioselective nanomaterial has been constructed, with gold nanoparticles (AuNPs) as active centers, chiral cysteine (Cys) as selectors for chiral recognition, and expanded mesoporous silica (EMSN) as a skeleton of the artificial enzyme. In the oxidation of chiral 3,4-dihydroxy-phenylalanine (DOPA), the nanozyme with d-Cys shows preference to l-DOPA while the artificial enzyme with l-Cys shows preference to d-DOPA. Subsequent calculation of apparent steady-state kinetic parameters and activation energies together with molecular dynamics (MD) simulations showed that the different affinity precipitated by hydrogen bonding formation between chiral Cys and DOPA is the origin of chiral selectivity.

Carbon Nanomaterials and DNA: from Molecular Recognition to Applications.

DNA is polymorphic. Increasing evidence has indicated that many biologically important processes are related to DNA's conformational transition and assembly states. In particular, noncanonical DNA structures, such as the right-handed A-form, the left-handed Z-form, the triplex, the G-quadruplex, the i-motif, and so forth, have been specific targets for the diagnosis and therapy of human diseases. Meanwhile, they have been widely used in the construction of smart DNA nanomaterials and nanoarchitectures. As rising stars in materials science, the family of carbon nanomaterials (CNMs), including two-dimensional graphene, one-dimensional carbon nanotubes (CNTs), and zero-dimensional graphene or carbon quantum dots (GQDs or CQDs), interact with DNA and are able to regulate the conformational transitions of DNA. The interaction of DNA with CNMs not only opens new opportunities for specific molecular recognition, but it also expands the promising applications of CNMs from materials science to biotechnology and biomedicine. In this Account, we focus on our contributions to the field of interactions between CNMs and DNA in which we have explored their promising applications in nanodevices, sensing, materials synthesis, and biomedicine. For one-dimensional CNTs, two-dimensional graphene, and zero-dimensional GQDs and CQDs, the basic principles, binding modes, and applications of the interactions between CNMs and DNA are reviewed. We aim to give prominence to the important status of CNMs in the field of molecular recognition for DNA. First, we summarized our discovery of the interactions between single-walled carbon nanotubes (SWNTs) with duplex, triplex, and human telomeric i-motif DNA and their interesting applications. For example, SWNTs are the first chemical agents that can selectively stabilize human telomeric i-motif DNA and induce its formation under physiological conditions. On the basis of this principle, two types of nanodevices were designed. One was used for highly sensitive detection of ppm levels of SWNTs in cells, and the other monitored i-motif DNA formation. Further studies indicated that SWNTs could inhibit telomerase activity in living cells and cause telomere dysfunction, providing new insight into the biological effects of SWNTs. Then, some applications that are based on the interactions between graphene and DNA are also summarized. Combined with other nanomaterials, such as metal and upconversion nanoparticles, several hybrid nanomaterials were successfully constructed, and a series of DNA logic gates were successfully developed. Afterwards, the newcomer of the carbon nanomaterials family, carbon quantum dots (CQDs), were found to be capable of modulating right-handed B-form DNA to left-handed Z-form DNA. These were further used to design FRET logic gates that were based on the CQD-derived DNA conformational transition. Taking into account the remaining challenges and promising aspects, CNM-based DNA nanotechnology and its biomedical applications will attract more attention and produce new breakthroughs in the near future.

Programmed Bacteria Death Induced by Carbon Dots with Different Surface Charge.

Based on a series of biochemical experiments for analysis and characterization, it is found that the uncharged C-dots have no effect on bacterial growth while the negatively charged and positively charged C-dots can induce bacteria apoptosis. For the positively charged C-dots, they can induce both bacteria apoptosis and bacteria death. These observations will provide new insights into bioapplications of carbon dots.

Carbon-dot-decorated TiO2 nanotube arrays used for photo/voltage-induced organic pollutant degradation and the inactivation of bacteria.

Photoluminescent carbon dots (c-dots) have recently attracted growing interest as a new member of the carbon-nanomaterial family. Here, we report for the first time that c-dot-decorated TiO2 nanotube arrays (c-dot/TiNTs) exhibit highly enhanced abilities regarding photo/voltage-induced organic pollutant degradation and bacterial inactivation. By applying UV irradiation (365 nm) or an electrochemical potential over 3 V (versus Ag/AgCl), an organic dye and a herbicide were efficiently degraded. Moreover, the inactivation of Gram-positive S. aureus and Gram-negative E. coli bacteria was realized on a c-dot/TiNT film. The c-dots were able to absorb light efficiently resulting in multiple exciton generation and also a reduction in the recombination of the e(-)/h(+) pair produced in c-dot/TiNT film during photo/voltage-induced degradation. It was also possible to readily regenerate the surface using ultraviolet light irradiation, leaving the whole film structure undamaged and with high reproducibility and stability.

Gold-nanoparticle-based multifunctional amyloid-ß inhibitor against Alzheimer's disease.

Targeting amyloid-ß (Aß)-induced complex neurotoxicity has received considerable attention in the therapeutic and preventive treatment of Alzheimer's disease (AD). The complex pathogenesis of AD suggests that it requires comprehensive treatment, and drugs with multiple functions against AD are more desirable. Herein, AuNPs@POMD-pep (AuNPs: gold nanoparticles, POMD: polyoxometalate with Wells-Dawson structure, pep: peptide) were designed as a novel multifunctional Aß inhibitor. AuNPs@POMD-pep shows synergistic effects in inhibiting Aß aggregation, dissociating Aß fibrils and decreasing Aß-mediated peroxidase activity and Aß-induced cytotoxicity. By taking advantage of AuNPs as vehicles that can cross the blood-brain barrier (BBB), AuNPs@POMD-pep can cross the BBB and thus overcome the drawbacks of small-molecule anti-AD drugs. Thus, this work provides new insights into the design and synthesis of inorganic nanoparticles as multifunctional therapeutic agents for treatment of AD.

Synthesis of fluorinated and nonfluorinated graphene quantum dots through a new top-down strategy for long-time cellular imaging.

Herein, a new strategy has been developed through combining a microwave-assisted technique with hydrothermal treatment to reduce graphene waste and improve production yield of graphene quantum dots (GQDs) prepared by top-down methods. By using fluorinated graphene oxide (FGO) as a raw material, fluorinated GQDs and nonfluorinated GQDs can be synthesized. Additionally, in the fluorinated GQDs, the protective shell supplied by fluorine improves the pH stability of photoluminescence and the strong electron-withdrawing group, -F, reduces the π-electron density of the aromatic structure; thus inhibiting reactivity toward singlet oxygen produced during irradiation and improving the photostability. Therefore, the as-prepared fluorinated GQDs with excellent photo- and pH stability are suitable for long-term cellular imaging.

Deciphering a nanocarbon-based artificial peroxidase: chemical identification of the catalytically active and substrate-binding sites on graphene quantum dots.

The design and construction of efficient artificial enzymes is highly desirable. Recent studies have demonstrated that a series of carbon nanomaterials possess intrinsic peroxidase activity. Among them, graphene quantum dots (GQDs) have a high enzymatic activity. However, the catalytic mechanism remains unclear. Therefore, in this report, we chose to decipher their peroxidase activity. By selectively deactivating the ketonic carbonyl, carboxylic, or hydroxy groups and investigating the catalytic activities of these GQD derivatives, we obtained evidence that the -C=O groups were the catalytically active sites, whereas the O=C-O- groups acted as substrate-binding sites, and -C-OH groups can inhibit the activity. These results were corroborated by theoretical studies. This work should not only enhance our understanding of nanocarbon-based artificial enzymes, but also facilitate the design and construction of other types of target-specific artificial enzymes.

Toward Functionality and Deactivation of Metal-Single-Atom in Heterogeneous Photocatalysts.

Single-atom heterogeneous catalysts (SAHCs) provide an enticing platform for understanding catalyst structure-property-performance relationships. The 100% atom utilization and adjustable local coordination configurations make it easy to probe reaction mechanisms at the atomic level. However, the progressive deactivation of metal-single-atom (MSA) with high surface energy leads to frequent limitations on their commercial viability. This review focuses on the atomistic-sensitive reactivity and atomistic-progressive deactivation of MSA to provide a unifying framework for specific functionality and potential deactivation drivers of MSA, thereby bridging function, purpose-modification structure-performance insights with the atomistic-progressive deactivation for sustainable structure-property-performance accessibility. The dominant functionalization of atomically precise MSA acting on properties and reactivity encompassing precise photocatalytic reactions is first systematically explored. Afterward, a detailed analysis of various deactivation modes of MSA and strategies to enhance their durability is presented, providing valuable insights into the design of SAHCs with deactivation-resistant stability. Finally, the remaining challenges and future perspectives of SAHCs toward industrialization, anticipating shedding some light on the next stage of atom-economic chemical/energy transformations are presented.

Polyoxometalate-based plasmonic electron sponge membrane for nanofluidic osmotic energy conversion.

Nanofluidic membranes have demonstrated great potential in harvesting osmotic energy. However, the output power densities are usually hampered by insufficient membrane permselectivity. Herein, we design a polyoxometalates (POMs)-based nanofluidic plasmonic electron sponge membrane (PESM) for highly efficient osmotic energy conversion. Under light irradiation, hot electrons are generated on Au NPs surface and then transferred and stored in POMs electron sponges, while hot holes are consumed by water. The stored hot electrons in POMs increase the charge density and hydrophilicity of PESM, resulting in significantly improved permselectivity for high-performance osmotic energy conversion. In addition, the unique ionic current rectification (ICR) property of the prepared nanofluidic PESM inhibits ion concentration polarization effectively, which could further improve its permselectivity. Under light with 500-fold NaCl gradient, the maximum output power density of the prepared PESM reaches 70.4 W m-2, which is further enhanced even to 102.1 W m-2 by changing the ligand to P5W30. This work highlights the crucial roles of plasmonic electron sponge for tailoring the surface charge, modulating ion transport dynamics, and improving the performance of nanofluidic osmotic energy conversion.

Donor-Acceptor Conjugated Acetylenic Polymers for High-Performance Bifunctional Photoelectrodes.

Due to the drastic required thermodynamical requirements, a photoelectrode material that can function as both a photocathode and a photoanode remains elusive. In this work, we demonstrate for the first time that, under simulated solar light and without co-catalysts, donor-acceptor conjugated acetylenic polymers (CAPs) exhibit both impressive oxygen evolution (OER) and hydrogen evolution (HER) photocurrents in alkaline and neutral medium, respectively. In particular, poly(2,4,6-tris(4-ethynylphenyl)-1,3,5-triazine) (pTET) provides a benchmark OER photocurrent density of ~200 µA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) at pH 13 and a remarkable HER photocurrent density of ~190 µA cm-2 at 0.3 V vs. RHE at pH 6.8. By combining theoretical investigations and electrochemical-operando Resonance Raman spectroscopy, we show that the OER proceeds with two different mechanisms, with the electron-depleted triple bonds acting as single-site OER in combination with the C4-C5 atoms of the phenyl rings as dual sites. The HER, instead, occurs via an electron transfer from the tri-acetylenic linkages to the triazine rings, which act as the HER active sites. This work represents a novel application of organic-based materials and contributes to the development of high-performance photoelectrochemical catalysts for the solar fuels' generation.

Promotion of anaerobic biodegradation of azo dye RR2 by different biowaste-derived biochars: Characteristics and mechanism study by machine learning.

The addition of biochar resulted in a 31.5 % to 44.6 % increase in decolorization efficiency and favorable decolorization stability. Biochar promoted extracellular polymeric substances (EPS) secretion, especially humic-like and fulvic-like substances. Additionally, biochar enhanced the electron transfer capacity of anaerobic sludge and facilitated surface attachment of microbial cells. 16S rRNA gene sequencing analysis indicated that biochar reduced microbial species diversity, enriching fermentative bacteria such as Trichococcus. Finally, a machine learning model was employed to establish a predictive model for biochar characteristics and decolorization efficiency. Biochar electrical conductivity, H/C ratio, and O/C ratio had the most significant impact on RR2 anaerobic decolorization efficiency. According to the results, the possible mechanism of RR2 anaerobic decolorization enhanced by different types of biochar was proposed.

Ciprofloxacin affects nutrient removal in manganese ore-based constructed wetlands: Adaptive responses of macrophytes and microbes.

Ciprofloxacin (CIP) has received considerable attention in recent decades due to its high ecological risk. However, little is known about the potential response of macrophytes and microbes to varying levels of CIP exposure in constructed wetlands. Therefore, lab-scale manganese ore-based tidal flow constructed wetlands (MO-TFCWs) were operated to evaluate the responses of macrophytes and microbes to CIP over the long term. The results indicated that total nitrogen removal improved from 79.93% to 87.06% as CIP rose from 0 to 4 mg L-1. The chlorophyll content and antioxidant enzyme activities in macrophytes were enhanced under CIP exposure, but plant growth was not inhibited. Importantly, CIP exposure caused a marked evolution of the substrate microbial community, with increased microbial diversity, expanded niche breadth and enhanced cooperation among the top 50 genera, compared to the control (no CIP). Co-occurrence network also indicated that microorganisms may be more inclined to co-operate than compete. The abundance of the keystone bacterium (involved in nitrogen transformation) norank_f__A0839 increased from 0.746% to 3.405%. The null model revealed drift processes (83.33%) dominated the community assembly with no CIP and 4 mg L-1 CIP. Functional predictions indicated that microbial carbon metabolism, electron transfer and ATP metabolism activities were enhanced under prolonged CIP exposure, which may contribute to nitrogen removal. This study provides valuable insights that will help achieve stable nitrogen removal from wastewater containing antibiotic in MO-TFCWs.

New insights into substrates shaped nutrients removal, species interactions and community assembly mechanisms in tidal flow constructed wetlands treating low carbon-to-nitrogen rural wastewater.

A limited understanding of microbial interactions and community assembly mechanisms in constructed wetlands (CWs), particularly with different substrates, has hampered the establishment of ecological connections between micro-level interactions and macro-level wetland performance. In this study, CWs with distinct substrates (zeolite, CW_A; manganese ore, CW_B) were constructed to investigate the nutrient removal efficiency, microbial interactions, metabolic mechanisms, and ecological assembly for treating rural sewage with a low carbon-to-nitrogen ratio. CW_B showed higher removal of ammonia nitrogen and total nitrogen by about 1.75-6.75 % and 3.42-5.18 %, respectively, compared to CW_A. Candidatus_Competibacter (denitrifying glycogen-accumulating bacteria) was the dominant microbial genus in CW_A, whereas unclassified_f_Blastocatellaceae (involved in carbon and nitrogen transformation) dominated in CW_B. The null model revealed that stochastic processes (drift) dominated community assembly in both CWs; however, deterministic selection accounted for a higher proportion in CW_B. Compared to those in CW_A, the interactions between microbes in CW_B were more complex, with more key microbes involved in carbon, nitrogen, and phosphorus conversion; the synergistic cooperation of functional bacteria facilitated simultaneous nitrification-denitrification. Manganese ores favour biofilm formation, increase the activity of the electron transport system, and enhance ammonia oxidation and nitrate reduction. These results elucidated the ecological patterns exhibited by microbes under different substrate conditions thereby contributing to our understanding of how substrates shape distinct microcosms in CW systems. This study provides valuable insights for guiding the future construction and management of CWs.

Insight into effect of polyethylene microplastic on nitrogen removal in moving bed biofilm reactor: Focusing on microbial community and species interactions.

Microplastics (MPs) pollution has emerged as a global concern, and wastewater treatment plants (WWTPs) are one of the potential sources of MPs in the environment. However, the effect of polyethylene MPs (PE) on nitrogen (N) removal in moving bed biofilm reactor (MBBR) remains unclear. We hypothesized that PE would affect N removal in MBBR by influencing its microbial community. In this study, we investigated the impacts of different PE concentrations (100, 500, and 1000 µg/L) on N removal, enzyme activities, and microbial community in MBBR. Folin-phenol and anthrone colorimetric methods, oxidative stress and enzyme activity tests, and high-throughput sequencing combined with bioinformation analysis were used to decipher the potential mechanisms. The results demonstrated that 1000 µg/L PE had the greatest effect on NH4+-N and TN removal, with a decrease of 33.5 % and 35.2 %, and nitrifying and denitrifying enzyme activities were restrained by 29.5-39.6 % and 24.6-47.4 %. Polysaccharide and protein contents were enhanced by PE, except for 1000 µg/L PE, which decreased protein content by 65.4 mg/g VSS. The positive links of species interactions under 1000 µg/L PE exposure was 52.07 %, higher than under 500 µg/L (51.05 %) and 100 µg/L PE (50.35 %). Relative abundance of some metabolism pathways like carbohydrate metabolism and energy metabolism were restrained by 0.07-0.11 % and 0.27-0.4 %. Moreover, the total abundance of nitrification and denitrification genes both decreased under PE exposure. Overall, PE reduced N removal by affecting microbial community structure and species interactions, inhibiting some key metabolic pathways, and suppressing key enzyme activity and functional gene abundance. This paper provides new insights into assessing the risk of MPs to WWTPs, contributing to ensuring the health of aquatic ecosystems.