High-performance fibre battery with polymer gel electrolyte.

Replacement of liquid electrolytes with polymer gel electrolytes is recognized as a general and effective way of solving safety problems and achieving high flexibility in wearable batteries1-6. However, the poor interface between polymer gel electrolyte and electrode, caused by insufficient wetting, produces much poorer electrochemical properties, especially during the deformation of the battery7-9. Here we report a strategy for designing channel structures in electrodes to incorporate polymer gel electrolytes and to form intimate and stable interfaces for high-performance wearable batteries. As a demonstration, multiple electrode fibres were rotated together to form aligned channels, while the surface of each electrode fibre was designed with networked channels. The monomer solution was effectively infiltrated first along the aligned channels and then into the networked channels. The monomers were then polymerized to produce a gel electrolyte and form intimate and stable interfaces with the electrodes. The resulting fibre lithium-ion battery (FLB) showed high electrochemical performances (for example, an energy density of about 128 Wh kg-1). This strategy also enabled the production of FLBs with a high rate of 3,600 m h-1 per winding unit. The continuous FLBs were woven into a 50 cm × 30 cm textile to provide an output capacity of 2,975 mAh. The FLB textiles worked safely under extreme conditions, such as temperatures of -40 °C and 80 °C and a vacuum of -0.08 MPa. The FLBs show promise for applications in firefighting and space exploration.

A rechargeable calcium-oxygen battery that operates at room temperature.

Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both a highly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.

Scalable production of high-performing woven lithium-ion fibre batteries.

Fibre lithium-ion batteries are attractive as flexible power solutions because they can be woven into textiles, offering a convenient way to power future wearable electronics1-4. However, they are difficult to produce in lengths of more than a few centimetres, and longer fibres were thought to have higher internal resistances3,5 that compromised electrochemical performance6,7. Here we show that the internal resistance of such fibres has a hyperbolic cotangent function relationship with fibre length, where it first decreases before levelling off as length increases. Systematic studies confirm that this unexpected result is true for different fibre batteries. We are able to produce metres of high-performing fibre lithium-ion batteries through an optimized scalable industrial process. Our mass-produced fibre batteries have an energy density of 85.69 watt hour per kilogram (typical values8 are less than 1 watt hour per kilogram), based on the total weight of a lithium cobalt oxide/graphite full battery, including packaging. Its capacity retention reaches 90.5% after 500 charge-discharge cycles and 93% at 1C rate (compared with 0.1C rate capacity), which is comparable to commercial batteries such as pouch cells. Over 80 per cent capacity can be maintained after bending the fibre for 100,000 cycles. We show that fibre lithium-ion batteries woven into safe and washable textiles by industrial rapier loom can wirelessly charge a cell phone or power a health management jacket integrated with fibre sensors and a textile display.

Large-area display textiles integrated with functional systems.

Displays are basic building blocks of modern electronics1,2. Integrating displays into textiles offers exciting opportunities for smart electronic textiles-the ultimate goal of wearable technology, poised to change the way in which we interact with electronic devices3-6. Display textiles serve to bridge human-machine interactions7-9, offering, for instance, a real-time communication tool for individuals with voice or speech difficulties. Electronic textiles capable of communicating10, sensing11,12 and supplying electricity13,14 have been reported previously. However, textiles with functional, large-area displays have not yet been achieved, because it is challenging to obtain small illuminating units that are both durable and easy to assemble over a wide area. Here we report a 6-metre-long, 25-centimetre-wide display textile containing 5 × 105 electroluminescent units spaced approximately 800 micrometres apart. Weaving conductive weft and luminescent warp fibres forms micrometre-scale electroluminescent units at the weft-warp contact points. The brightness between electroluminescent units deviates by less than 8 per cent and remains stable even when the textile is bent, stretched or pressed. Our display textile is flexible and breathable and withstands repeated machine-washing, making it suitable for practical applications. We show that an integrated textile system consisting of display, keyboard and power supply can serve as a communication tool, demonstrating the system's potential within the 'internet of things' in various areas, including healthcare. Our approach unifies the fabrication and function of electronic devices with textiles, and we expect that woven-fibre materials will shape the next generation of electronics.

Effect of jujube pulp on acid- and rennet-induced coagulation properties of milk.

Milk coagulation is an important step in the production of fermented dairy products such as yogurt and cheese. Jujube is gaining popularity and acceptance as a food ingredient. In China, jujube yogurt is popular among consumers. However, there is limited information on the effect of jujube on acid- and rennet-induced coagulation properties of milk. The objective of this study was to evaluate the effects of jujube pulp at different concentrations on acid- and rennet-induced coagulation kinetics of milk and the microstructure of acid- and rennet-induced gels. During acid-induced coagulation, with increasing jujube pulp concentration, the initial pH value decreased; however, the final pH value increased. The initial elasticity index (EI) value increased, and the time point at which the mean square displacement curves lost the linear trend advanced. The sample with 10% jujube pulp had the densest structure and highest EI value. During rennet-induced coagulation, with increasing jujube pulp concentration, the production rate and amount of caseinomacropeptide decreased, and the final EI value increased. Protein aggregates in rennet-induced gels became rough, and the sample with 20% jujube pulp had the highest EI value. This study provides a new perspective and understanding of the application of jujube in fermented dairy products.

Interaction of physical activity and low-level air pollution on cardiovascular disease: a prospective cohort study in UK Biobank.

To investigate the associations of physical activity (PA), low-level air pollution, and interaction on cardiovascular diseases (CVD) incidence based on the UK Biobank. PA was measured by the International Physical Activity Questionnaire and five air pollutants were estimated using Land Use Regression. All association estimates were based on Cox regression. Dose-response relationship was explored by restricted cubic spline, while multiplicative and additive interaction were examined by Pinteraction and relative excess risk due to interaction (RERI). As deviating proportional hazards assumption, we analyzed data as follow-up < 4 years and ≥ 4 years, separately. PA with 1000-4000 Metabolic Equivalent Task (MET) min/week showed the strongest protective impact on CVD incidence, while only low-level nitrogen dioxides (NO2) showed negative impact among five air pollutants and was considered for further analysis. Multiplicative interaction between PA and NO2 was observed during ≥ 4 years follow-up (Pinteraction = 0.049) while not during < 4 years (Pinteraction = 0.290). Positive additive interactions were found for high PA and low NO2 (< 20 µg/m3) group (RERI: 0.07, 95% confidence intervals: 0.02-0.11) during < 4 years, and for moderate PA with NO2 at 40- µg/m3 (0.07, 0.02-0.13) and < 20 µg/m3 (0.07, 0.02-0.12), while high PA showed similar results with NO2 at 40-, 20- and < 20 µg/m3 during ≥ 4 years. PA about 1000-4000 METs min/week showed the lowest CVD risk. Possibility of interaction with PA and NO2 is more likely to present with the increase in follow-up duration. We call for the optimal thresholds of PA, and exploring interaction thoroughly by considering types of PA.

[Genetic analysis of a family with epilepsy accompanied by developmental delay and brain deformity due to a de novo variant of TUBB2A gene].

OBJECTIVE: To explore the clinical manifestations and pathogenic variant in a family with epilepsy, developmental delay and brain deformity. METHODS: Clinical data of the child and his family members who had visited the Department of Pediatrics, Linyi People's Hospital on July 2, 2022 were collected. The child, his sister and parents were subjected to high-throughput sequencing, and the result was verified by Sanger sequencing. RESULTS: The child was a 6-year-old boy with developmentally delay and had epileptic seizures with fever sensitivity for four years. Cranial imaging showed brain dysplasia, while the video electroencephalogram showed abnormal discharge. High-throughput sequencing showed the child has harbored a heterozygous c.5G>T (p.Arg2Leu) variant of TUBB2A gene, which was unreported previously. His sister also carried the variant and had similar clinical manifestations, whilst his parents were of the wild-type and had normal clinical phenotypes. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the variant was classified as pathogenic (PS2+PM2_Supporting+PM5+PP1+PP2+PP3). CONCLUSION: The heterozygous c.5G>T (p.Arg2Leu) variant of the TUBB2A gene, in the form of gonadal mosaicism, probably underlay the disorders in this family.

Association between Sleep Factors and Parkinson's Disease: A Prospective Study Based on 409,923 UK Biobank Participants.

INTRODUCTION: Limited evidence indicates an association between sleep factors and the risk of Parkinson's disease (PD). However, large prospective cohort studies including both sexes are needed to verify the association between daytime sleepiness, sleep duration, and PD risk. Furthermore, other sleep factors like chronotype and snoring and their impact on increased PD risk should be explored by simultaneously considering daytime sleepiness and snoring. METHODS: This study included 409,923 participants from the UK Biobank. Data on five sleep factors (chronotype, sleep duration, sleeplessness/insomnia, snoring, and daytime sleepiness) were collected using a standard self-administered questionnaire. PD occurrence was identified using linkages with primary care, hospital admission, death register, or self-report. Cox proportional hazard models were used to investigate the association between sleep factors and PD risk. Subgroup (age and sex) and sensitivity analyses were performed. RESULTS: During a median follow-up of 11.89 years, 2,158 incident PD cases were documented. The main association analysis showed that prolonged sleep duration (hazard ratio [HR]: 1.20, 95% confidence interval [CI]: 1.05, 1.37) and occasional daytime sleepiness (HR: 1.15, 95% CI: 1.04, 1.26) increased the PD risk. Compared to those who self-reported never or rarely having sleeplessness/insomnia, participants who reported usually having sleeplessness/insomnia had a decreased risk of PD (HR: 0.85, 95% CI: 0.75, 0.96). Subgroup analysis revealed that women who self-reported no snoring had a decreased PD risk (HR: 0.85; 95% CI: 0.73, 0.99). Sensitivity analyses indicated that the robustness of the results was affected by potential reverse causation and data completeness. CONCLUSION: Long sleep duration increased the PD risk, especially among men and participants ≥60 years, while snoring increased the risk of PD in women. Additional studies are needed to (i) further consider other sleep traits (e.g., rapid eye movement sleep behavior disorder and sleep apnea) that might be related to PD, (ii) objectively measure sleep-related exposure, and (iii) confirm the effects of snoring on PD risk by considering the impact of obstructive sleep apnea and investigating its underlying mechanisms.

Helical insertion of polyphenylene chains into confined cylindrical slits composed of two carbon nanotubes.

The helical insertion behavior of poly(para-phenylene) (PP) chains into confined cylindrical slits constructed by two carbon nanotubes (CNTs) with different diameters is studied by molecular dynamics simulations. The contribution of system energy and each energy component to helical self-assembly is discussed to further explain the conditions, driving force and mechanism. The width and length of the slit, the diameter of the outer tube and the temperature have a great impact on the helical insertion of PP chains. Two equations are proposed to confirm the diameter and the distances between the PP helix and the inner and outer walls of the given CNTs. The helical self-assembly of PP with different numbers of chains inserted into the slits is further studied. This study has a great benefit in understanding the conformational behavior of polymers, even biological macromolecules in confinements.

Long-term exposure to ambient air pollutants and their interaction with physical activity on insomnia: A prospective cohort study.

Exposure to air pollution or lack of physical activity (PA) increases the risk of insomnia. However, evidence on joint exposure to air pollutants is limited, and the interaction of joint air pollutants and PA on insomnia is unknown. This prospective cohort study included 40,315 participants with related data from the UK Biobank, which recruited participants from 2006 to 2010. Insomnia was assessed by self-reported symptoms. The annual average air pollutant concentrations of particulate matter (PM2.5, PM10), nitrogen oxides (NO2, NOX), sulfur dioxide (SO2) and carbon monoxide (CO) were calculated based on participants' addresses. We applied a weighted Cox regression model to evaluate the correlation between air pollutants and insomnia and newly proposed an air pollution score to assess joint air pollutants effect using a weighted concentration summation after obtaining the weights of each pollutant in the Weighted-quantile sum regression. With a median follow-up of 8.7 years, 8511 participants developed insomnia. For each 10 µg/m³ increase in NO2, NOX, PM10, SO2, the average hazard ratios (AHRs) and 95% confidence interval (CI) of insomnia were 1.10 (1.06, 1.14), 1.06 (1.04, 1.08), 1.35 (1.25, 1.45) and 2.58 (2.31, 2.89), respectively; For each 5 µg/m³ increase in PM2.5 and each 1 mg/m³ increase in CO, the corresponding AHRs (95%CI) were 1.27 (1.21, 1.34) and 1.83 (1.10, 3.04), respectively. The AHR (95%CI) for insomnia associated with per interquartile range (IQR) increase in air pollution scores were 1.20 (1.15, 1.23). In addition, potential interactions were examined by setting cross-product terms of air pollution score with PA in the models. We observed an interaction between air pollution scores and PA (P = 0.032). The associations between joint air pollutants and insomnia were attenuated among participants with higher PA. Our study provides evidence on developing strategies for improving healthy sleep by promoting PA and reducing air pollution.

Comparative effectiveness of non-pharmacological interventions for frailty: a systematic review and network meta-analysis.

BACKGROUND: Frailty endangers the health of older adults. Furthermore, the prevalence of frailty continues to increase as the global population ageing. OBJECTIVE: To update evidence on the effectiveness of non-pharmacological interventions for frailty by conducting a network meta-analysis (NMA) of randomised controlled trials (RCTs). METHODS: Eight databases were searched from January 1, 2000, until September 24, 2021. RCTs of interventions for frailty among participants aged ≥60 years were considered eligible. The primary outcome was frailty. Pairwise meta-analysis and NMA were performed, with the pooled standardised mean difference (SMD) and 95% confidence interval (CI) being reported. RESULTS: A total of 69 RCTs were included after screening 16,058 retrieved citations. There were seven types of interventions (11 interventions) for frailty among the included RCTs. Physical activity (PA) (pooled SMD = 0.43, 95% CI: 0.34-0.51), multicomponent intervention (pooled SMD = 0.34, 95% CI: 0.23-0.45) and nutrition intervention (pooled SMD = 0.21, 95% CI: 0.06-0.35) were associated with reducing frailty compared to control, of which PA was the most effective type of intervention. In terms of specific types of PA, resistance training (pooled SMD = 0.58, 95% CI: 0.33-0.83), mind-body exercise (pooled SMD = 0.57, 95% CI: 0.24-0.90), mixed physical training (pooled SMD = 0.47, 95% CI: 0.37-0.57) and aerobic training (pooled SMD = 0.36, 95% CI: 0.09-0.62) were associated with a reduction in frailty compared to usual care. Resistance training was the most effective PA intervention. CONCLUSION: Resistance training has the best potential to reduce frailty in older adults. This finding might be useful to clinicians in selecting interventions for older adults with frailty.

Analysis of Floral Color Differences between Different Ecological Conditions of Clematis tangutica (Maxim.) Korsh.

The Clematis tangutica (Maxim.) Korsh. is a wild flowering plant that is most widely distributed on the Qinghai-Tibet Plateau, with beautiful, brightly colored flowers and good ornamental properties and adaptability. In diverse natural environments, the blossom color of C. tangutica (Maxim.) Korsh. varies greatly, although it is unclear what causes this diversity. It was examined using UPLC-MS/MS and transcriptome sequencing for the investigation of various compounds, differentially expressed genes (DEGs), and flavonoid biosynthesis-related pathways in two flowers in two ecological settings. The results showed that a total of 992 metabolites were detected, of which 425 were differential metabolites, mainly flavonoid metabolites associated with its floral color. The most abundant flavonoids, flavonols and anthocyanin metabolites in the G type were cynaroside, isoquercitrin and peonidin-3-O-glucoside, respectively. Flavonoids that differed in multiplicity in G type and N type were rhoifolin, naringin, delphinidin-3-O-rutinoside, chrysoeriol and catechin. Rhoifolin and chrysoeriol, produced in flavone and flavonol biosynthesis, two flavonoid compounds of C. tangutica (Maxim.) Korsh. with the largest difference in floral composition in two ecological environments. In two ecological environments of flower color components, combined transcriptome and metabolome analyses revealed that BZ1-1 and FG3-1 are key genes for delphinidin-3-O-rutinoside in anthocyanin biosynthesis, and HCT-5 and FG3-3 are key genes for rhoifolin and naringin in flavonoid biosynthesis and flavone and flavonol. Key genes for chlorogenic acid in flavonoid biosynthesis include HCT-6, CHS-1 and IF7MAT-1. In summary, differences in flavonoids and their content are the main factors responsible for the differences in the floral color composition of C. tangutica (Maxim.) Korsh. in the two ecological environments, and are associated with differential expression of genes related to flavonoid synthesis.

[Clinical phenotype and genetic analysis of a child with 14q12q13 microdeletion syndrome manifesting as congenital hypothyroidism].

OBJECTIVE: To analyze the clinical phenotype and genetic etiology for a child featuring congenital hypothyroidism (CH). METHODS: Whole exome sequencing (WES), copy number variation (CNV) sequencing and chromosomal microarray analysis (CMA) were carried out for a newborn infant who had presented at Linyi People's Hospital for CH. Clinical data of the child was analyzed, in addition with a literature review. RESULTS: The main characteristics of the newborn infant had included peculiar face, vulvar edema, hypotonia, psychomotor retardation, recurrent respiratory tract infection with laryngeal wheezing and feeding difficulties. Laboratory test indicated hypothyroidism. WES suggested a CNV deletion on chromosome 14q12q13. CMA further confirmed a 4.12 Mb deletion at chromosome 14q12q13.3 (32649595_36769800), which has encompassed 22 genes including NKX2-1, the pathogenic gene for CH. The same deletion was found in neither of her parents. CONCLUSION: Through the analysis of clinical phenotype and genetic variant, the child was diagnosed with 14q12q13.3 microdeletion syndrome.

[Lianmei Qiwu Decoction relieves diabetic cardiac autonomic neuropathy by regulating AMPK/TrkA/TRPM7 signaling pathway].

This study investigated the effect of Lianmei Qiwu Decoction(LMQWD) on the improvement of cardiac autonomic nerve remodeling in the diabetic rat model induced by the high-fat diet and explored the underlying mechanism of LMQWD through the AMP-activated protein kinase(AMPK)/tropomyosin receptor kinase A(TrkA)/transient receptor potential melastatin 7(TRPM7) signaling pathway. The diabetic rats were randomly divided into a model group, an LMQWD group, an AMPK agonist group, an unloaded TRPM7 adenovirus group(TRPM7-N), an overexpressed TRPM7 adenovirus group(TRPM7), an LMQWD + unloaded TRPM7 adenovirus group(LMQWD+TRPM7-N), an LMQWD + overexpressed TRPM7 adenovirus group(LMQWD+TRPM7), and a TRPM7 channel inhibitor group(TRPM7 inhibitor). After four weeks of treatment, programmed electrical stimulation(PES) was employed to detect the arrhythmia susceptibility of rats. The myocardial cell structure and myocardial tissue fibrosis of myocardial and ganglion samples in diabetic rats were observed by hematoxylin-eosin(HE) staining and Masson staining. The immunohistochemistry, immunofluorescence, real-time quantitative polymerase chain reaction(RT-PCR), and Western blot were adopted to detect the distribution and expression of TRPM7, tyrosine hydroxylase(TH), choline acetyltransferase(ChAT), growth associated protein-43(GAP-43), nerve growth factor(NGF), p-AMPK/AMPK, and other genes and related neural markers. The results showed that LMQWD could significantly reduce the arrhythmia susceptibility and the degree of fibrosis in myocardial tissues, decrease the levels of TH, ChAT, and GAP-43 in the myocardium and ganglion, increase NGF, inhibit the expression of TRPM7, and up-regulate p-AMPK/AMPK and p-TrkA/TrkA levels. This study indicated that LMQWD could attenuate cardiac autonomic nerve remodeling in the diabetic state, and its mechanism was associated with the activation of AMPK, further phosphorylation of TrkA, and inhibition of TRPM7 expression.

An Implantable Fiber Biosupercapacitor with High Power Density by Multi-Strand Twisting Functionalized Fibers.

Biosupercapacitors (BSCs) that can harvest and store chemical energy show great promise for power delivery of biological applications. However, low power density still limits their applications, especially as miniaturized implants. Here, we report an implantable fiber BSC with maximal power density of 22.6 mW cm-2 , superior to the previous reports. The fiber BSC was fabricated by integrating anode and cathode fibers of biofuel cell with supercapacitor fibers through multi-strand twisting. This twisting structure endowed many channels inside and high electrochemical active area for efficient mass diffusion and charge transfer among different fibers, benefiting high power output. The obtained thin and flexible fiber BSC operated stably under deformations and performed high biocompatibility after implantation. Eventually, the fiber BSC was implanted subcutaneously in rats and successfully realized electrical stimulation of sciatic nerve, showing promise as a power source in vivo.

Metal-Backboned Polymers with Well-Defined Lengths.

Constructing the backbones of polymers with metal atoms is an attractive strategy to develop new functional polymeric materials, but it has yet to be studied due to synthetic challenges. Here, metal atoms are interconnected as the backbones of polymers to yield metal-backboned polymers (MBPs). Rational design of multidentate ligands synthesized via an efficient iterative approach leads to the successful construction of a series of nickel-backboned polymers (NBPs) with well-defined lengths and up to 21 nickel atoms, whose structures are systematically confirmed. These NBPs exhibit strong and length-depended absorption with narrow band gaps, offering promising applications in optoelectronic devices and semiconductors. We also demonstrate the high thermal stability and solution processsability of such nickel-backboned polymers. Our results represent a new opportunity to design and synthesize a variety of new metal-backboned polymers for promising applications in the future.

The leaf polarity factors SGS3 and YABBYs regulate style elongation through auxin signaling in Mimulus lewisii.

Style length is a major determinant of breeding strategies in flowering plants and can vary dramatically between and within species. However, little is known about the genetic and developmental control of style elongation. We characterized the role of two classes of leaf adaxial-abaxial polarity factors, SUPPRESSOR OF GENE SILENCING3 (SGS3) and the YABBY family transcription factors, in the regulation of style elongation in Mimulus lewisii. We also examined the spatiotemporal patterns of auxin response during style development. Loss of SGS3 function led to reduced style length via limiting cell division, and downregulation of YABBY genes by RNA interference resulted in shorter styles by decreasing both cell division and cell elongation. We discovered an auxin response minimum between the stigma and ovary during the early stages of pistil development that marks style differentiation. Subsequent redistribution of auxin response to this region was correlated with style elongation. Auxin response was substantially altered when both SGS3 and YABBY functions were disrupted. We suggest that auxin signaling plays a central role in style elongation and that the way in which auxin signaling controls the different cell division and elongation patterns underpinning natural style length variation is a major question for future research.

Clinical decision-making framework against over-testing based on modeling implicit evaluation criteria.

Different statistical methods include various subjective criteria that can prevent over-testing. However, no unified framework that defines generalized objective criteria for various diseases is available to determine the appropriateness of diagnostic tests recommended by doctors. We present the clinical decision-making framework against over-testing based on modeling the implicit evaluation criteria (CDFO-MIEC). The CDFO-MIEC quantifies the subjective evaluation process using statistics-based methods to identify over-testing. Furthermore, it determines the test's appropriateness with extracted entities obtained via named entity recognition and entity alignment. More specifically, implicit evaluation criteria are defined-namely, the correlation among the diagnostic tests, symptoms, and diseases, confirmation function, and exclusion function. Additionally, four evaluation strategies are implemented by applying statistical methods, including the multi-label k-nearest neighbor and the conditional probability algorithms, to model the implicit evaluation criteria. Finally, they are combined into a classification and regression tree to make the final decision. The CDFO-MIEC also provides interpretability by decision conditions for supporting each clinical decision of over-testing. We tested the CDFO-MIEC on 2,860 clinical texts obtained from a single respiratory medicine department in China with the appropriate confirmation by physicians. The dataset was supplemented with random inappropriate tests. The proposed framework excelled against the best competing text classification methods with a Mean_F1 of 0.9167. This determined whether the appropriate and inappropriate tests were properly classified. The four evaluation strategies captured the features effectively, and they were imperative. Therefore, the proposed CDFO-MIEC is feasible because it exhibits high performance and can prevent over-testing.

Associations of musculoskeletal disorders with occupational stress and mental health among coal miners in Xinjiang, China: a cross-sectional study.

BACKGROUND: Musculoskeletal disorders (MSDs), a common type of occupational diseases, have become the main cause of absenteeism and early retirement in the occupational population, as well as a major risk factor for occupational disability. The purpose of this study was to investigate the effects of occupational stress and mental health on MSDs in coal miners in Xinjiang, China, to provide a theoretical basis for reducing the incidence of MSDs in coal miners and improving their physical and mental health. METHODS: In this study, stratified cluster random sampling was used to randomly select six coal mining companies in Xinjiang, and 1675 coal miners were surveyed by questionnaire. The status of occupational stress, mental health and MSDs among coal miners was investigated by means of the Effort-Reward Imbalance questionnaire (ERI), Symptom Checklist-90(SCL-90), and Musculoskeletal disorders scale (MSDs) questionnaire. RESULTS: The prevalence of MSDs among coal miners was higher, and there were statistical differences among different sexes, ages, working years, shifts, types of work, educational level and monthly income (P < 0.001). The prevalence of MSDs in different body parts in the occupational stress group and mental disorder group was higher than that in the normal group. The results of multivariate logistic regression analysis showed that females had an increased risk of developing MSDs (OR = 2.23, 95% CI.:1.50,3.33). The risk of MSDs was higher with age < 30 years (30-39 years,OR = 2.39, 95% CI.,1.68,3.40; 40-49 years,OR = 2.15, 95% CI.:1.52,3.04; 50-60 years:OR = 3.25, 95% CI.:2.09,5.07), and the longer the working years, the higher the risk of MSDs (OR = 1.90, 95% CI.:1.38,2.62). The two shifts group (OR = 2.18, 95% CI.:1.59,2.98) had an increased risk of developing MSDs compared with the fixed day shift group. The risk of MSDs was lower in heading drivers (OR = 0.41, 95% CI.:0.29,0.60,) and transport workers (OR = 0.30, 95% CI.:0.20,0.43). The higher the education level, the lower the risk of MSDs (high school: OR = 0.46, 95% CI.:0.34,0.62, junior college and above: OR = 0.12, 95% CI.:0.08,0.17), and the higher the monthly income, the lower the risk of MSDs (OR = 0.50, 95% CI.:0.34,0.74). Occupational stress (OR = 1.32, 95% CI.:1.05,1.67) and mental disorder(OR = 2.94, 95% CI.:2.25,3.84) increased the risk of MSDs. A Bayesian network diagram showed that occupational stress and MSDs have direct effects on mental disorders, and occupational stress can have indirect effects on mental disorders through MSDs. CONCLUSION: Our research shows that MSDs are common among coal miners. Occupational stress and psychological disorders can increase the incidence of MSDs.

Transformation of Tetracycline by Manganese Peroxidase from Phanerochaete chrysosporium.

The negative impacts on the ecosystem of antibiotic residues in the environment have become a global concern. However, little is known about the transformation mechanism of antibiotics by manganese peroxidase (MnP) from microorganisms. This work investigated the transformation characteristics, the antibacterial activity of byproducts, and the degradation mechanism of tetracycline (TC) by purified MnP from Phanerochaete chrysosporium. The results show that nitrogen-limited and high level of Mn2+ medium could obtain favorable MnP activity and inhibit the expression of lignin peroxidase by Phanerochaete chrysosporium. The purified MnP could transform 80% tetracycline in 3 h, and the threshold of reaction activator (H2O2) was about 0.045 mmol L-1. After the 3rd cyclic run, the transformation rate was almost identical at the low initial concentration of TC (77.05-88.47%), while it decreased when the initial concentration was higher (49.36-60.00%). The antimicrobial potency of the TC transformation products by MnP decreased throughout reaction time. We identified seven possible degradation products and then proposed a potential TC transformation pathway, which included demethylation, oxidation of the dimethyl amino, decarbonylation, hydroxylation, and oxidative dehydrogenation. These findings provide a novel comprehension of the role of MnP on the fate of antibiotics in nature and may develop a potential technology for tetracycline removal.