Mechanistic Investigation into Single-Electron Oxidative Addition of Single-Atom Cu(I)-N4 Site: Revealing the Cu(I)-Cu(II)-Cu(I) Catalytic Cycle in Photochemical Hydrophosphinylation.

Understanding the valency and structural variations of metal centers during reactions is important for mechanistic studies of single-atom catalysis, which could be beneficial for optimizing reactions and designing new protocols. Herein, we precisely developed a single-atom Cu(I)-N4 site catalyst via a photoinduced ligand exchange (PILE) strategy. The low-valent and electron-rich copper species could catalyze hydrophosphinylation via a novel single-electron oxidative addition (OA) pathway under light irradiation, which could considerably decrease the energy barrier compared with the well-known hydrogen atom transfer (HAT) and single electron transfer (SET) processes. The Cu(I)-Cu(II)-Cu(I) catalytic cycle, via single-electron oxidative addition and photoreduction, has been proven by multiple in situ or operando techniques. This catalytic system demonstrates high efficiency and requires room temperature conditions and no additives, which improves the turnover frequency (TOF) to 1507 h-1. In particular, this unique mechanism has broken through the substrate limitation and shows a broad scope for different electronic effects of alkenes and alkynes.

Formation and Fluorescent Mechanism of Multiple Color Emissive Carbon Dots from o-Phenylenediamine.

Carbon dots (CDs) have received considerable attention in many application areas owing to their unique optical properties and potential applications; however, the fluorescent mechanism is an obstacle to their applications. Herein, three-color emissive CDs are prepared from single o-phenylenediamine (oPD) by regulating the ratio of ethanol and dimethylformamide (DMF). Fluorescent mechanism of these CDs is proposed as molecular state fluorescence. Reaction intermediates are identified using liquid chromatrography-mass spectroscopy (LC-MS) and 1H nuclear magnetic resonance (NMR) spectra. 1H-Benzo[d]imidazole (BI), 2,3-diaminophenazine (DAP), and 5,14-dihydroquinoxalino[2,3-b] phenazine (DHQP) are proposed to be the fluorophores of blue, green, and red emissive CDs by comparing their optical properties. As per the LC-MS and 1H-NMR analysis, DHQP with red emission tends to form from DAP and oPD in pure ethanol. By adding DMF, BI formation is enhanced and DHQP formation is suppressed. The prepared CDs exhibit green emission with DAP. When the DMF amount is >50%, BI formation is considerably promoted, resulting in DAP formation being suppressed. BI with blue emission then turns into the fluorophore of CDs. This result provides us an improved understanding of the fluorescent mechanism of oPD-based CDs, which guides us in designing the structure and optical properties of CDs.

Highly Selective Photocatalytic Synthesis of Acetic Acid at 0-25 °C.

Acetic acid (AA), a vital compound in chemical production and materials manufacturing, is conventionally synthesized by starting with coal or methane through multiple steps including high-temperature transformations. Here we present a new synthesis of AA from ethane through photocatalytic selective oxidation of ethane by H2O2 at 0-25 °C. The catalyst designed for this process comprises g-C3N4 with anchored Pd1 single-atom sites. In situ studies and computational simulation suggest the immobilized Pd1 atom becomes positively charged under photocatalytic condition. Under photoirradiation, the holes on the Pd1 single-atom of OH-Pd1 ⊕ ${{}^{\oplus }}$ /g-C3N4 serves as a catalytic site for activating a C-H instead of C-C of C2H6 with a low activation barrier of 0.14 eV, through a concerted mechanism. Remarkably, the selectivity for synthesizing AA reaches 98.7 %, achieved under atmospheric pressure of ethane at 0 °C. By integrating photocatalysis with thermal catalysis, we introduce a highly selective, environmentally friendly, energy-efficient synthetic route for AA, starting from ethane, presenting a promising alternative for AA synthesis. This integration of photocatalysis in low-temperature oxidation demonstrates a new route of selective oxidation of light alkanes.

Ultra-Large Two-Dimensional Metal Nanowire Networks by Microfluidic Laminar Flow Synthesis for Formic Acid Electrooxidation.

Despite the great research interest in two-dimensional metal nanowire networks (2D MNWNs) due to their large specific surface area and abundance of unsaturated coordination atoms, their controllable synthesis still remains a significant challenge. Herein, a microfluidics laminar flow-based approach is developed, enabling the facile preparation of large-scale 2D structures with diverse alloy compositions, such as PtBi, AuBi, PdBi, PtPdBi, and PtAuCu alloys. Remarkably, these 2D MNWNs can reach sizes up to submillimeter scale (~220 µm), which is significantly larger than the evolution from the 1D or 3D counterparts that typically measure only tens of nanometers. The PdBi 2D MNWNs affords the highest specific activity for formic acid (2669.1 mA mg-1) among current unsupported catalysts, which is 103.5 times higher than Pt-black, respectively. Furthermore, in situ Fourier transform infrared (FTIR) experiments provide comprehensive evidence that PdBi 2D MNWNs catalysts can effectively prevent CO* poisoning, resulting in exceptional activity and stability for the oxidation of formic acid.

The Formation Process and Mechanism of Carbon Dots Prepared from Aromatic Compounds as Precursors: A Review.

Fluorescent carbon dots are a novel type of nanomaterial. Due to their excellent optical properties, they have extensive application prospects in many fields. Studying the formation process and fluorescence mechanism of CDs will assist scientists in understanding the synthesis of CDs and guide more profound applications. Due to their conjugated structures, aromatic compounds have been continuously used to synthesize CDs, with emissions ranging from blue to NIR. There is a lack of a systematic summary of the formation process and fluorescence mechanism of aromatic precursors to form CDs. In this review, the formation process of CDs is first categorized into three main classes according to the precursor types of aromatic compounds: amines, phenols, and polycyclics. And then, the fluorescence mechanism of CDs synthesized from aromatic compounds is summarized. The challenges and prospects are proposed in the last section.

Anammox Coupled with Photocatalyst for Enhanced Nitrogen Removal and the Activated Aerobic Respiration of Anammox Bacteria Based on cbb3-Type Cytochrome c Oxidase.

This study introduced photogenerated electrons into the anammox system by coupling them to a g-C3N4 nanoparticle photocatalyst. A high nitrogen removal efficiency (94.25%) was achieved, exceeding the biochemical limit of 89% imposed by anammox stoichiometry. Photogenerated electrons boosted anammox metabolic activity by empowering key enzymes (NIR, HZS, and WLP-related proteins) and triggered rapid algal enrichment by enhancing the algal Calvin cycle, thus developing multiple anammox-algae synergistic nitrogen removal processes. Remarkably, the homologous expression of cbb3-type cytochrome c oxidase (CcO) in anammox bacteria was discovered and reported in this study for the first time. This conferred aerobic respiration capability to anammox bacteria and rendered them the principal oxygen consumer under 7.9-19.8 mg/L dissolved oxygen, originating from algal photosynthesis. Additionally, photogenerated electrons selectively targeted the cb1 complex and cbb3-type CcO as activation sites while mobilizing the RegA/B regulatory system to activate the expression of cbb3-type CcO. Furthermore, cbb3-type CcO blocked oxidative stress in anammox by depleting intracellular oxygen, a substrate for reactive oxygen species synthesis. This optimized the environmental sensitivity of anammox bacteria and maintained their high metabolic activity. This study expands our understanding of the physiological aptitudes of anammox bacteria and provides valuable insights into applying solar energy for enhanced wastewater treatment.

Unravelling the adsorption and electroreduction performance of CO2 and N2 over defective and B, P, Si-doped C3Ns: a DFT study.

Two-dimensional carbon-based materials have great potential for electrocatalysis. Herein, we screen 12 defective and doped C3N nanosheets by evaluating their CO2RR and NRR activity and selectivity vs. the HER based on density functional theory calculations. The calculation results suggest that all 12 C3Ns can enhance CO2 adsorption and activation. And PN-VC-C3N is the best electrocatalyst for the CO2RR towards HCOOH with UL = -0.17 V, which is much more positive than most of the reported values. BN-C3N and PN-C3N are also good electrocatalysts that promote the CO2RR towards HCOOH (UL = -0.38 V and -0.46 V). Moreover, we find that SiC-C3N can reduce CO2 to CH3OH, adding an alternative option to the limited catalysts available for the CO2RR to CH3OH. Furthermore, BC-VC-C3N, BC-VN-C3N, and SiC-VN-C3N are promising electrocatalysts for the HER with |ΔGH*| ≤ 0.30 eV. However, only three C3Ns of BC-VC-C3N, SiC-VN-C3N, and SiC-VC-C3N can slightly improve N2 adsorption. And none of the 12 C3Ns are found to be suitable for the electrocatalytic NRR because all the ΔeNNH* values are larger than the corresponding ΔGH* values. The high performance of C3Ns in the CO2RR stems from the altered structure and electronic properties, which result from the introduction of vacancies and doping elements into C3N. This work identifies suitable defective and doped C3Ns for excellent performance in the electrocatalytic CO2RR, which will inspire relevant experimental studies to further explore C3Ns for electrocatalysis.

Photocatalyst for High-Performance H2 Production: Ga-Doped Polymeric Carbon Nitride.

A photocatalyst system is generally comprises a catalyst and cocatalyst to achieve light absorption, electron-hole separation, and surface reaction. It is a challenge to develop a single photocatalyst having all functions so as to lower the efficiency loss. Herein, the active GaN4 site is integrated into a polymeric carbon nitride (CN) photocatalyst (GCN), which displays an excellent H2 production rate of 9904 µmol h-1 g-1 . It is 162 and 3.3 times higher than that of CN with the absence (61 µmol h-1 g-1 ) and presence (2981 µmol h-1 g-1 ), respectively, of 1.0 wt % Pt. Under light irradiation the electron is injected and stored at the GaN4 site, where the LUMO locates. The HOMO distributes on the aromatic ring resulting in spatial charge separation. Transient photovoltage discloses the electron-storage capability of GCN. The negative GaN4 promotes proton adsorption in the excited state. The positive adsorption energy drives H2 desorption from GaN4 after passing the electron to the proton. This work opens up opportunities for exploring a novel catalyst for H2 production.

Highly efficient wurtzite/zinc blende CdS visible light photocatalyst with high charge separation efficiency and stability.

Mixed phase TiO2 (Degussa P25) exhibits superior photocatalytic performance and stability due to the formation of the hetero-phase junction between anatase and rutile. However, the large bandgap limits its visible light activity. CdS is a photocatalyst with a broad light absorption band up to 550 nm. Constructing a hetero-phase junction will greatly promote the photocatalytic activity of CdS. In this work, the one-step solvothermal method was used to synthesize CdS hetero-phase junction with both hexagonal wurtzite (WZ) and cubic zinc blende (ZB) phases. The ratio of WZ and ZB phases can be tuned by adjusting the solvent ratio and reaction time to construct type I junction and effectively separate the photogenerated electron-hole pair. Under visible-light illumination, the optimal photocatalytic activity of the prepared material reaches 7.96 mmol h-1 g-1, and the quantum efficiency is 36.7% at 420 nm, which is three times higher than that of any single-phase sample (cubic or hexagonal phase) and maintains high photocatalytic stability as well. It is expected that this work will provide a feasible prospect for the practical application of high-efficiency homogeneous junction photocatalysts.

C-C Coupling on Single-Atom-Based Heterogeneous Catalyst.

Compared to homogeneous catalysis, heterogeneous catalysis allows for ready separation of products from the catalyst and thus reuse of the catalyst. C-C coupling is typically performed on a molecular catalyst which is mixed with reactants in liquid phase during catalysis. This homogeneous mixing at a molecular level in the same phase makes separation of the molecular catalyst extremely challenging and costly. Here we demonstrated that a TiO2-based nanoparticle catalyst anchoring singly dispersed Pd atoms (Pd1/TiO2) is selective and highly active for more than 10 Sonogashira C-C coupling reactions (R≡CH + R'X → R≡R'; X = Br, I; R' = aryl or vinyl). The coupling between iodobenzene and phenylacetylene on Pd1/TiO2 exhibits a turnover rate of 51.0 diphenylacetylene molecules per anchored Pd atom per minute at 60 °C, with a low apparent activation barrier of 28.9 kJ/mol and no cost of catalyst separation. DFT calculations suggest that the single Pd atom bonded to surface lattice oxygen atoms of TiO2 acts as a site to dissociatively chemisorb iodobenzene to generate an intermediate phenyl, which then couples with phenylacetylenyl bound to a surface oxygen atom. This coupling of phenyl adsorbed on Pd1 and phenylacetylenyl bound to Oad of TiO2 forms the product molecule, diphenylacetylene.

Operando chemistry of catalyst surfaces during catalysis.

Chemistry of a catalyst surface during catalysis is crucial for a fundamental understanding of mechanism of a catalytic reaction performed on the catalyst in the gas or liquid phase. Due to the pressure- or molecular density-dependent entropy contribution of gas or liquid phase of the reactants and the potential formation of a catalyst surface during catalysis different from that observed in an ex situ condition, the characterization of the surface of a catalyst under reaction conditions and during catalysis can be significant and even necessary for understanding the catalytic mechanism at a molecular level. Electron-based analytical techniques are challenging for studying catalyst nanoparticles in the gas or liquid phase although they are necessary techniques to employ. Instrumentation and further development of these electron-based techniques have now made in situ/operando studies of catalysts possible. New insights into the chemistry and structure of catalyst nanoparticles have been uncovered over the last decades. Herein, the origin of the differences between ex situ and in situ/operando studies of catalysts, and the technical challenges faced as well as the corresponding instrumentation and innovations utilized for characterizing catalysts under reaction conditions and during catalysis, are discussed. The restructuring of catalyst surfaces driven by the pressure of reactant(s) around a catalyst, restructuring in reactant(s) driven by reaction temperature and restructuring during catalysis are also reviewed herein. The remaining challenges and possible solutions are briefly discussed.

Surface Defects Enhanced Visible Light Photocatalytic H2 Production for Zn-Cd-S Solid Solution.

In order to investigate the defect effect on photocatalytic performance of the visible light photocatalyst, Zn-Cd-S solid solution with surface defects is prepared in the hydrazine hydrate. X-ray photoelectron spectra and photoluminescence results confirm the existence of defects, such as sulfur vacancies, interstitial metal, and Zn and Cd in the low valence state on the top surface of solid solutions. The surface defects can be effectively removed by treating with sulfur vapor. The solid solution with surface defect exhibits a narrower band gap, wider light absorption range, and better photocatalytic perfomance. The optimized solid solution with defects exhibits 571 µmol h(-1) for 50 mg photocatalyst without loading Pt as cocatalyst under visible light irradiation, which is fourfold better than that of sulfur vapor treated samples. The wavelength dependence of photocatalytic activity discloses that the enhancement happens at each wavelength within the whole absorption range. The theoretical calculation shows that the surface defects induce the conduction band minimum and valence band maximum shift downward and upward, respectively. This constructs a type I junction between bulk and surface of solid solution, which promotes the migration of photogenerated charges toward the surface of nanostructure and leads to enhanced photocatalytic activity. Thus a new method to construct highly efficient visible light photocatalysts is opened.

Black-colored ZnO nanowires with enhanced photocatalytic hydrogen evolution.

Black-colored ZnO nanowires have been prepared in a metal-organic chemical vapor deposition system by employing a relatively low growth temperature and oxygen-deficient conditions. X-ray photoelectron spectroscopy reveals the incorporation of carbon into the nanowires. The photocatalytic hydrogen evolution activity of the black-colored ZnO nanowires is over 2.5 times larger than that of the pristine ZnO nanowires under simulated solar illumination conditions, and the enhanced photocatalytic activity can be attributed to the higher absorption of visible light by the black color and better carrier separation at the ZnO/carbon interface.

Plasmonic Ag@oxide nanoprisms for enhanced performance of organic solar cells.

Localized surface plasmon resonance (LSPR), light scattering, and lowering the series resistance of noble metal nanoparticles (NPs) provide positive effect on the performance of photovoltaic device. However, the exciton recombination on the noble metal NPs accompanying above influences will deteriorate the performance of device. In this report, surface-modified Ag@oxide (TiO2 or SiO2 ) nanoprisms with 1-2 nm shell thickness are developed. The thin film composed of P3HT/Ag@oxides and P3HT:PCBM/Ag@oxides is investigated by absorption, photoluminescence (PL), and transient absorption spectroscopy. The results show a significant absorption, PL enhancement, and long-lived photogenerated polaron in the P3HT/Ag@TiO2 film, indicating the increase of photogenerated exciton population by LSPR of Ag nanoprisms. In the case of P3HT/Ag nanoprisms, partial PL quench and relatively short-lived photogenerated polaron are observed. That indicates that the oxides layer can effectively avoid the exciton recombination. When the Ag@oxide nanoprisms are introduced into the active layer of P3HT:PCBM photovoltaic devices, about 31% of power conversion efficiency enhancement is obtained relative to the reference cell. All these results indicate that Ag@oxides can enhance the performance of the cell, at the same time the ultrathin oxide shell prevents from the exciton recombination.

Bandgap engineering of Magnéli phase Ti(n)O(2n-1): Electron-hole self-compensation.

An electron-hole self-compensation effect is revealed and confirmed in nitrogen doped Magnéli phase Ti(n)O(2n-1) (n = 7, 8, and 9) by using hybrid density functional theory calculations. We found that the self-compensation effect between the free electrons in Magnéli phase Ti(n)O(2n-1) (n = 7, 8, and 9) and the holes induced by p-type nitrogen doping could not only prevent the recombination of photo-generated electron-hole pairs, but also lead to an effective bandgap reduction. This novel electron-hole self-compensation effect may provide a new approach for bandgap engineering of Magnéli phase metal suboxides.

Surface Engineering of Perovskite Single Crystals by Atomic Layer Deposited Tin Oxide for Optical Communication.

Perovskite single crystals with excellent physical properties have broad prospects in the field of optoelectronics. However, the presence of dangling bonds, surface dislocations, and chemical impurities results in high surface defect density and sensitivity to humidity. Unfortunately, there are relatively few surface engineering strategies for single perovskite single crystals. We present a strategy utilizing atomic layer deposited SnOx to passivate surface defects in perovskite single crystals. The photodetector prepared based on the modified FAPbBr3 single crystals exhibits a low dark current of 1.89 × 10-9 A at a 5 V bias, close to 4 times lower with respect to the pristine device, a high detectivity of 2.3 × 1010 jones, and a fast response time of 27 µs. Moreover, the photodetectors feature long-term operational stability because the presence of a dense SnOx capping layer hinders the ingress of moisture and diffusion of ions. We further demonstrate the promise of our perovskite single crystal detectors for real-time subaqueous optical communication.

Synthesis of Multiple Emission Carbon Dots from Dihydroxybenzoic Acid via Decarboxylation Process.

Carbon dots (CDs), as a new zero-dimensional carbon-based nanomaterial with desirable optical properties, exhibit great potential for many application fields. However, the preparation technique of multiple emission CDs with high yield is difficult and complex. Therefore, exploring the large-scale and straightforward synthesis of multicolor CDs from a simple carbon source is necessary. In this work, the solvent-free method prepares a series of multicolor emission CDs from dihydroxybenzoic acid (DHBA). The maximum emission wavelengths are 408, 445, 553, 580, and 610 nm, respectively, covering the visible light region. The 2,4- and 2,6-CDs possess the longer emission wavelength caused by the 2,4-, and 2,6-DHBA easily undergo decarboxylation to form the larger sp2 domain graphitized structure. These CDs incorporated with g-C3N4 can significantly improve the photocatalytic water-splitting hydrogen production rate by extending the visible light absorption and enhancing the charge separation efficiency. The long-wavelength emission CDs can further enhance photocatalytic activity primarily by improving visible light absorption efficiency.

Highly efficient charge transfer from small-sized cadmium sulfide nanosheets to large-scale nitrogen-doped carbon for visible-light dominated hydrogen evolution.

Slow charge transfer and carrier recombination are key issues in photocatalytic reactions. The current solution is to load small-sized cocatalysts onto large-sized photocatalysts. Here a new strategy is proposed. Small-sized photocatalysts of cadmium sulfide (CdS) nanosheets are grown onto large-sized cocatalysts of N-doped amorphous carbon (a-CN) to construct CdS @ a-CN photocatalysts. Photoluminescence spectra and transient photocurrent demonstrate that optimized CdS @ a-CN shows effective charge separation compared with CdS. The corresponding photocatalytic H2 yield of optimized CdS @ a-CN is âˆ¼244 µmol, which is 3.6 times higher than that of CdS. Besides, the hydrogen yield for CdS under visible-light irradiation is significantly improved from âˆ¼44 µmol to âˆ¼217 µmol for the optimized CdS @ a-CN. Our design strategy provides an effective way to construct photocatalytic systems with outstanding photocatalytic performance.

Templated photocatalytic synthesis of well-defined platinum hollow nanostructures with enhanced catalytic performance for methanol oxidation.

Hollow metallic nanostructures exhibit important applications in catalysis, sensing, and phototherapy due to their increased surface areas, reduced densities, and unique optical and electronic features. Here we report a facile photocatalytic process to synthesize and tune hollow platinum (Pt) nanostructures. Through hierarchically structured templates, well-defined hollow Pt nanostructures are achieved. These nanostructures possess interconnected nanoporous framework as shell with high surface area for enhanced catalytic performance/mass transport for methanol oxidation.

Porous one-dimensional nanostructures through confined cooperative self-assembly.

We report a simple confined self-assembly process to synthesize nanoporous one-dimensional photoactive nanostructures. Through surfactant-assisted cooperative interactions (e.g., π-π stacking, ligand coordination, and so forth) of the macrocyclic building block, zinc meso-tetra (4-pyridyl) porphyrin (ZnTPyP), self-assembled ZnTPyP nanowires and nanorods with controlled diameters and aspect ratios are prepared. Electron microscopy characterization in combination with X-ray diffraction and gas sorption experiments indicate that these materials exhibit stable single-crystalline and high surface area nanoporous frameworks with well-defined external morphology. Optical characterizations using UV-vis spectroscopy and fluorescence imaging and spectroscopy show enhanced collective optical properties over the individual chromophores (ZnTPyP), favorable for exciton formation and transport.