Comparison of active measurements, lichen biomonitoring, and passive sampling for atmospheric mercury monitoring.

The number of atmospheric mercury (Hg) monitoring stations is growing globally. However, there are still many regions and locations where Hg monitoring is limited or non-existent. Expansion of the atmospheric Hg monitoring network could be facilitated by the use of cost-effective monitoring methods. As such, biomonitoring and passive monitoring offer a unique alternative to well-established monitoring by active measurements, since they do not require a power supply and require minimal workload to operate. The use of biomonitoring (lichens and mosses) and passive air samplers (PASs) (various designs with synthetic materials) has been reported in the literature, and comparisons with active measurement methods have also been made. However, these studies compared either biomonitoring or PASs (not both) to only one type of active measurement. In our work, we used transplanted (7 sampling sites) and in situ lichens (8 sampling sites) for biomonitoring, two PASs from different producers (3 sampling sites), and two different active measurement types (continuous and discontinuous active measurements, 1 and 8 sampling sites, respectively) to evaluate their effectiveness as monitoring methods. In the 9-month sampling campaign, 3 sampling locations with different characteristics (unpolluted, vicinity of a cement plant, and vicinity of a former Hg mine) were used. The results obtained with lichens and PASs clearly distinguished between sampling locations with different Hg concentrations; using both PASs and lichens together increased the confidence of our observations. The present work shows that biomonitoring and passive sampling can be effectively used to identify areas with elevated atmospheric Hg concentrations. The same can be said for discontinuous active measurements; however, the discrepancy between atmospheric Hg concentrations derived from PASs and discontinuous active measurements should be further investigated in the future.

Seven-year monitoring of mercury in wet precipitation and atmosphere at the Amsterdam Island GMOS station.

Mercury (Hg) fate and transport research requires more effort to obtain a deep knowledge of its biogeochemical cycle, particularly in the Southern Hemisphere and Tropics that are still missing of distributed monitoring sites. Continuous monitoring of atmospheric Hg concentrations and trend worldwide is relevant for the effectiveness evaluation of the Minamata Convention on Mercury (MCM) actions. In this context, Gaseous Elemental Mercury (GEM) and total mercury (THg) in precipitations were monitored from 2013 to 2019 at the Amsterdam Island Observatory (AMS - 37°48'S, 77°34'E) to provide insights into the Hg pathway in the remote southern Indian Ocean, also considering ancillary dataset of Rn-222, CO2, CO, and CH4. GEM average concentration was 1.06 ± 0.07 ng m-3, with a slight increase during the austral winter due to both higher wind speed over the surface ocean and contributions from southern Africa. In wet depositions, THg average concentration was 2.39 ± 1.17 ng L-1, whereas the annual flux averaged 2.04 ± 0.80 µg m-2 year-1. In general, both GEM and Volume-Weighted Mean Concentration (VWMC) of THg did not show an increasing/decreasing trend over the seven-year period, suggesting a substantial lack of evolution about emission of Hg reaching AMS. Air masses Cluster Analysis and Potential Source Contribution Function showed that oceanic evasion was the main Hg contributor at AMS, while further contributions were attributable to long-range transport events from southern Africa, particularly when the occurrence of El Niño increased the frequency of wildfires.

Recent applications and novel strategies for mercury determination in environmental samples using microextraction-based approaches: A review.

The growing need to monitor Hg levels in the environment to control its emissions and evaluate the effectiveness of reduction policies is driving the scientific community to focus efforts on creating analytical methods that are simpler, lower cost, more performing, and environmentally sustainable. In this context, an important contribution is provided by microextraction techniques, which have long proven to be simple, reliable, and to ensure an environmentally responsible sample preparation. This manuscript reviews the recent progress in the determination of environmental Hg using microextraction techniques. The considered studies involve all environmental compartments (i.e., air, water, soil, and biota) and have been discussed by grouping them according to the employed technique while pointing out the main advances achieved and the most important limitations. The ultimate goal is to provide an up-to-date overview of the analytical potential of microextraction techniques that can be exploited in various investigation fields and to highlight the most important knowledge gaps that should be addressed in the coming years, such as in-situ sampling, the use of natural materials, and the value of metrological support to obtain data SI-traceable and comparable.

First atmospheric mercury measurements at a coastal site in the Apulia region: seasonal variability and source analysis.

In the framework of the Italian Special Network for Mercury (ISNM) "Reti Speciali", a sampling campaign to monitor atmospheric mercury (Hg) was carried out at Monte Sant'Angelo (MSA). This is a coastal monitoring station in the Apulia region, representative of the Southern Adriatic area, within the Mediterranean basin. This work presents continuous Gaseous Elemental Mercury (GEM) measurements over about three years at MSA, using the Lumex RA-915AM mercury analyzer. The aim was to obtain a dataset suitable for the analysis of Hg concentrations in terms of source and transport variation. Diurnal cycles of GEM were evaluated to observe the influence of local atmospheric temperature and wind speed on potential re-emissions from surrounding sea and soil surfaces. Data were also analyzed in terms of long-range transport, using backward trajectory cluster analysis. The spatial distribution of potential sources, contributing to higher measured GEM values, was obtained employing Potential Source Contribution Function (PSCF) statistics. The influence of major Hg anthropogenic point sources, such as mining activities and coal-fuel power plants, both regionally and continentally, from mainland Europe, was observed. The role of the vegetation GEM uptake in modulating the seasonal GEM variability was also investigated. The potential of wildfire influence over the highest detected GEM levels was further examined using active fire data and the evaluation of the vegetation dryness index during the selected episodes.

An innovative green protocol for the quantification of benzothiazoles, benzotriazoles and benzosulfonamides in PM10 using microwave-assisted extraction coupled with solid-phase microextraction gas chromatography tandem-mass spectrometry.

Benzothiazoles (BTHs), benzotriazoles (BTRs), and benzenesulfonamides (BSAs) are chemicals used in several industrial and household applications. Despite these compounds are emerging pollutants, there is still a lack of information about their presence in outdoor air samples. In this paper, we developed a new method for the quantification of BTHs, BTRs, and BSAs in airborne particulate matter (PM10). The extraction of fourteen analytes from PM10 was accomplished by microwave-assisted extraction (MAE) using an environmentally friendly mixture of water and ethanol. SPME was used to analyze the target compounds from the MAE extract by gas chromatography-tandem mass spectrometry (SPME-GC-MS/MS), eliminating additional sample clean-up steps. The best working conditions for MAE and SPME were examined multivariately by experimental design techniques. The target compounds were quantified in selected reaction monitoring acquisition mode. The proposed method was carefully validated, and the achieved results were satisfactory in terms of linearity, lower limit of quantification (picograms per cubic meter), intra- and inter-day accuracy (81-118% and 82-114%, respectively), and precision (repeatability and reproducibility in the range 2.3-17% and 7.4-19%, respectively). The application in a real monitoring campaign showed that the developed protocol is a valuable and eco-friendly alternative to the methods proposed so far.

Analytical study on the primary and secondary organic carbon and elemental carbon in the particulate matter at the high-altitude Monte Curcio GAW station, Italy.

This study provides a thorough investigation of the trends of organic carbon (OC) and elemental carbon (EC) in particulate matter (PM)10 and PM2.5 samples collected at the Monte Curcio Observatory (1780 m a.s.l.), a station of the Global Atmosphere Watch (GAW) program and Global Mercury Observation System (GMOS) network. Although the drawn attention toward these pollutants, there is still a lack of data for southern Italy, and this work is a contribution toward the filling of this gap. PM was sampled daily in 2016 and analyzed by thermo-optical transmittance method, while equivalent black carbon (eBC) concentrations in PM10 were simultaneously measured using a multiangle absorption photometer. The results showed that in PM10, the average values of OC and EC were 1.43 µgC/m3 and 0.12 µgC/m3, whereas in PM2.5, these concentrations were 1.09 µgC/m3 and 0.12 µgC/m3, respectively. We detected a clear seasonal variability in OC and EC with higher concentrations during the warm period. Moreover, the analysis of the OC/EC ratio revealed that most of the carbonaceous aerosol was transported by long-range air masses, as further confirmed by the use of the concentration-weighed trajectory (CWT) model. The mass absorption cross-section at 632 nm of EC (MACEC) over the entire period was 9.67 ± 4.86 m2/g and 8.70 ± 3.18 m2/g in PM2.5 and PM10, respectively, and did not exhibit a clear seasonal variation. The concentrations for OC and EC were also used for the computation of the secondary organic carbon (SOC) content, whose outcomes resulted in a seasonal trend similar to those obtained for OC and EC. As regards the eBC, its weekly pattern showed a slight increase during the weekend in the warm period, consistent with the anthropic activities in the touristic area surrounding the observatory.

Modification of the EPA method 1631E for the quantification of total mercury in natural waters.

To support the effectiveness of the Minamata Convention, the accurate determinations of mercury (Hg) in natural waters is an important but certainly challenging task due to the low concentrations expected in ambient samples. Mercury contamination may occur from many sources such as the unproperly-cleaning of storage bottles or the use of reagents for sample analysis with Hg traces, thus leading the analyst to easily run into errors. In our work, we propose some key modifications to the United States Environmental Protection Agency(EPA) method 1631E aimed at reducing the Hg contamination of reagents, storage containers, and minimizing the carryover effect in the instrumental line of sampling. The changes introduced have been tailored for the use of the method with cold vapor atomic fluorescence spectroscopy (CV-AFS) instrumentation and tested as part of a United Nations Environment Program (UNEP) ring test. Although the edited method was tested with natural water samples, the proposed method improvements can also apply to the Hg analysis in solid matrices that require the prior acid digestion of the samples.•A customized version of the EPA method 1631E is proposed for the analysis of aqueous samples.•New protocols for the reduction of contamination in the storage bottles and reagents used for the preparation of BrCl solution are provided.•A useful strategy for the control of the memory effect is included.

Agrochemical treatments as a source of heavy metals and rare earth elements in agricultural soils and bioaccumulation in ground beetles.

The continuous and extensive application of agrochemicals leads to the accumulation of heavy metals (HMs) and rare earth elements (REEs) in agricultural soils and their transfer in the food web with consequent relevant risks for human and ecosystem health. In this study, HM and REE concentrations were quantified in the soil of wheat crop fields conventionally managed in the agricultural areas of Sila Mountain (Southern Italy) and compared with the concentration in a field of wild herbs, used as control. Statistical analyses and principal component analysis suggested that the use of pesticides, herbicides and fertilizers contributes to the accumulation of HMs and REEs in the soil. Different accumulation patterns were recorded in treated fields as a consequence of the type and amount of agrochemical used and the crop rotation. The exposure risk associated with the transfer through the tropic levels of agroecosystem was carried out measuring the concentration of HMs and REEs in adults of Harpalus (Pseudoophonus) rufipes (De Geer, 1774) collected from each monitored site. Different accumulation patterns found in specimens from the monitored sites highlighted the ability of this generalist predator to regulate metal uptake under field conditions. The values of bioaccumulation factor (BAF) allow to defining the order of accumulation in P. rufipes which was classified as a macroconcentrator of Cd, Cu, Mg and Zn. Our results can supplement the limited information regarding the REE accumulation in soil invertebrates and may provide reference data for assessing potential environmental risks in croplands.

A green approach for organophosphate ester determination in airborne particulate matter: Microwave-assisted extraction using hydroalcoholic mixture coupled with solid-phase microextraction gas chromatography-tandem mass spectrometry.

Particulate matter (PM) is among the most dangerous air pollutants, and there is a growing concern related to the effects of airborne particles on human health. Their harmful effects can be derived are directly linked to the size of particles themselves and the associated pollutants after they have been taken up by inhalation. In this work was developed a new analytical method for the quantification of organophosphorus esters (OPE) bound to airborne PM. The proposed protocol provides for the microwave-assisted extraction (MAE) of the analytes from the PM followed by solid-phase microextraction gas chromatography-tandem mass spectrometry determination (SPME-GC-MS/MS). Unlike to the traditional protocol, which provides for the use of tedious Soxhlet extraction with environmentally damaging organic solvents, the proposed method allows for a reliable quantification by using an eco-friendly hydroalcoholic mixture (water/ethanol; 50:50, v/v). The method was developed using as target compounds ten organophosphate esters, namely tripropyl phosphate (TPP), tri-n-butyl phosphate (TBP), tris(2-chloroethyl) phosphate (TCEP), tris(1-chloro-2-propyl) phosphate (TCPP), tris(1,3-dichloro-2-propyl) phosphate (TDCPP), tributoxyethyl phosphate (TBEP), triphenyl phosphate (TPhP), 2-ethylhexyl-diphenyl phosphate (EHDPP), tris(2-ethylhexyl) phosphate (TEHP) and tricresyl phosphate (TCP). The extraction performance of five SPME fibers was evaluated and the DVB/CAR/PDMS coating demonstrated to be the most suitable for the extraction of the target analytes. Experimental Design was used for the multivariate optimization of the parameters affecting the MAE process as well as the SPME extraction, and the optimal working conditions were determined by using Derringer's desirability function. The developed method was validated in terms of linearity, sensitivity (LLOQ values of 0.5 ng/mL for TDCPP and 0.1 ng/mL for the other analytes), matrix effect (81-117%), intra and inter day accuracy (83-115% and 80-115%, respectively), and precision (repeatability and reproducibility in the range 1.0-12.4% and 2.3-15.2%, respectively). The satisfactory performances reached make the proposed protocol a green and high-throughput alternative for OPE quantification in particulate matter.