RESUMO
Pyridinium electrolytes are promising candidates for flow-battery-based energy storage1-4. However, the mechanisms underlying both their charge-discharge processes and overall cycling stability remain poorly understood. Here we probe the redox behaviour of pyridinium electrolytes under representative flow battery conditions, offering insights into air tolerance of batteries containing these electrolytes while providing a universal physico-chemical descriptor of their reversibility. Leveraging a synthetic library of extended bispyridinium compounds, we track their performance over a wide range of potentials and identify the singlet-triplet free energy gap as a descriptor that successfully predicts the onset of previously unidentified capacity fade mechanisms. Using coupled operando nuclear magnetic resonance and electron paramagnetic resonance spectroscopies5,6, we explain the redox behaviour of these electrolytes and determine the presence of two distinct regimes (narrow and wide energy gaps) of electrochemical performance. In both regimes, we tie capacity fade to the formation of free radical species, and further show that π-dimerization plays a decisive role in suppressing reactivity between these radicals and trace impurities such as dissolved oxygen. Our findings stand in direct contrast to prevailing views surrounding the role of π-dimers in redox flow batteries1,4,7-11 and enable us to efficiently mitigate capacity fade from oxygen even on prolonged (days) exposure to air. These insights pave the way to new electrolyte systems, in which reactivity of reduced species is controlled by their propensity for intra- and intermolecular pairing of free radicals, enabling operation in air.
RESUMO
Large-scale energy storage is becoming increasingly critical to balancing renewable energy production and consumption1. Organic redox flow batteries, made from inexpensive and sustainable redox-active materials, are promising storage technologies that are cheaper and less environmentally hazardous than vanadium-based batteries, but they have shorter lifetimes and lower energy density2,3. Thus, fundamental insight at the molecular level is required to improve performance4,5. Here we report two in situ nuclear magnetic resonance (NMR) methods of studying redox flow batteries, which are applied to two redox-active electrolytes: 2,6-dihydroxyanthraquinone (DHAQ) and 4,4'-((9,10-anthraquinone-2,6-diyl)dioxy) dibutyrate (DBEAQ). In the first method, we monitor the changes in the 1H NMR shift of the liquid electrolyte as it flows out of the electrochemical cell. In the second method, we observe the changes that occur simultaneously in the positive and negative electrodes in the full electrochemical cell. Using the bulk magnetization changes (observed via the 1H NMR shift of the water resonance) and the line broadening of the 1H shifts of the quinone resonances as a function of the state of charge, we measure the potential differences of the two single-electron couples, identify and quantify the rate of electron transfer between the reduced and oxidized species, and determine the extent of electron delocalization of the unpaired spins over the radical anions. These NMR techniques enable electrolyte decomposition and battery self-discharge to be explored in real time, and show that DHAQ is decomposed electrochemically via a reaction that can be minimized by limiting the voltage used on charging. We foresee applications of these NMR methods in understanding a wide range of redox processes in flow and other electrochemical systems.
Assuntos
Fontes de Energia Elétrica , Espectroscopia de Ressonância Magnética , Eletrólitos/química , Elétrons , OxirreduçãoRESUMO
Iodide-based redox mediation in Li-O2 batteries is regarded as a promising system due to its relatively high round-trip efficiency, compared to alternative systems. Here we explore the role of electrolyte composition in the solvation of I-, which has been shown to be critical for the efficient operation of this redox mediator, using a molecular dynamics approach. A combinatorial exploration of I- and H2O concentrations was performed, for a fixed concentration of Li+, across a series of glymes, with increasing chain length (mono- to tetraglyme). The resulting radial distribution functions show that shorter glymes allow for a closer packing of the I- redox mediator. Furthermore, increasing the I- concentration also reduces the solvation of Li+ in the glymes, especially in G2. The presence of water further pulls the I- and Li+ together. With increasing water content, its presence in the iodide's coordination shell increases markedly - an effect most pronounced for monoglyme. Competition between Li+ and I- for the coordination of water is modulated by the different solvents as they perturb the local coordination shell of these important complexes, with longer chain lengths being less affected by increases in water concentrations.
RESUMO
We describe Reflection Absorption Infrared Spectroscopy (RAIRS) and first-principles Density Functional Theory (DFT) studies of ammonia adsorption on the Cu{311} surface. Our experimental results indicate an upright chemisorbed species at low coverages, with at least one additional species accompanying this at higher coverages. Our high-coverage RAIRS data cannot be fully explained by DFT models containing only ammonia or its dissociation products, even allowing for molecular tilt and/or the formation of a bilayer. We therefore also consider urea and formamide as possible products of surface reaction with residual carbon monoxide, but these species are again not fully compatible with our observed spectra. The overlayer composition at high coverages remains mysterious.
RESUMO
The mitigation of decomposition reactions of lithium-ion battery electrolyte solutions is of critical importance in controlling device lifetime and performance. However, due to the complexity of the system, exacerbated by the diverse set of electrolyte compositions, electrode materials, and operating parameters, a clear understanding of the key chemical mechanisms remains elusive. In this work, operando pressure measurements, solution NMR, and electrochemical methods were combined to study electrolyte oxidation and reduction at multiple cell voltages. Two-compartment LiCoO2/Li cells were cycled with a lithium-ion conducting glass-ceramic separator so that the species formed at each electrode could be identified separately and further reactions of these species at the opposite electrode prevented. One principal finding is that chemical oxidation (with an onset voltage of â¼4.7 V vs Li/Li+ for LiCoO2), rather than electrochemical reaction, is the dominant decomposition process at the positive electrode surface in this system. This is ascribed to the well-known release of reactive oxygen at higher states-of-charge, indicating that reactions of the electrolyte at the positive electrode are intrinsically linked to surface reactivity of the active material. Soluble electrolyte decomposition products formed at both electrodes are characterized, and a detailed reaction scheme is constructed to rationalize the formation of the observed species. The insights on electrolyte decomposition through reactions with reactive oxygen species identified through this work have a direct impact on understanding and mitigating degradation in high-voltage/higher-energy-density LiCoO2-based cells, and more generally for cells containing nickel-containing cathode materials (e.g., LiNixMnyCozO2; NMCs), as they lose oxygen at lower operating voltages.
RESUMO
Industrial synthesis of ammonia takes place at high temperatures and pressures via the dissociative adsorption of molecular nitrogen on a transition metal catalyst. In contrast, biological ammonia synthesis occurs under ambient conditions via the hydrogenation of intact molecular nitrogen at the active site of an enzyme. We hypothesise that the latter process may be mimicked within an inorganic system if the intact nitrogen molecule can be polarised, rendering it particularly susceptible to attack by hydrogen. Furthermore, by analogy with the surface chemistry of carbon monoxide at alkali-modified nickel and cobalt surfaces, we consider whether such a polarisation may be achieved by coadsorption with potassium on the same or similar transition metals. Here, we report on reflection absorption infrared spectroscopy results, interpreted with the aid of first-principles density functional calculations, which reveal both similarities and differences between the behaviour of carbon monoxide and nitrogen. Importantly, our calculations suggest that the surface-induced dipole of molecular nitrogen can indeed be enhanced by the coadsorbed alkali metal.
RESUMO
Li-O2 batteries (LOB) performance degradation ultimately occurs through the accumulation of discharge products and irreversible clogging of the porous electrode during the cycling. Electrode binder degradation in the presence of reduced oxygen species can result in additional coating of the conductive surface, exacerbating capacity fading. Herein, a facile method to fabricate free-standing is established, binder-free electrodes for LOBs in which multi-wall carbon nanotubes form cross-linked networks exhibiting high porosity, conductivity, and flexibility. These electrodes demonstrate high reproducibility upon cycling in LOBs. After cell death, efficient and inexpensive methods to wash away the accumulated discharge products are demonstrated, as reconditioning method. The second life usage of these electrodes is validated, without noticeable loss of performance. These findings aim to assist in the development of greener high energy density batteries while reducing manufacturing and recycling costs.
RESUMO
Weakening the intramolecular N-N bond is essential to promote direct hydrogenation of adsorbed N2 on catalyst surfaces. The interaction of N2 with Li on Ni{110} surfaces has been investigated. We show that the N-N bond is significantly weakened with increasing Li coverage, evidenced by large redshifts in N-N stretch frequency of up to 380 cm(-1) compared to the gas phase. Some increased thermal stability of the most weakened N2,ads states is also observed. We speculate that the various observed redshifts in N-N stretch frequency are associated with an enhanced backfilling of the 2π* antibonding orbital of N2 due to both the Li-induced surface electrostatic field, and the formation of Lix(N2)y surface complexes.
Assuntos
Lítio/química , Níquel/química , Nitrogênio/química , Adsorção , Catálise , Propriedades de SuperfícieRESUMO
The realization of practical nonaqueous lithium-air batteries (LABs) calls for novel strategies to address their numerous theoretical and technical challenges. LiOH formation/decomposition has recently been proposed as a promising alternative route to cycling LABs via Li2 O2 . Herein, the progress in developing LiOH-based nonaqueous LABs is reviewed. Various catalytic systems, either soluble or solid-state, that can activate a LiOH-based electrochemistry are compared in detail, with emphasis in providing an updated understanding of the oxygen reduction and evolution reactions in nonaqueous media. We identify the key factors that can switch the cell chemistry between Li2 O2 and LiOH and highlight the debate around these routes, as well as rationalize potential causes for these opposing opinions. The identities of the reaction intermediates, activity of redox mediators and additives, location of reaction interfaces, causes of parasitic reactions, as well as the effect of CO2 on the LiOH electrochemistry, all play a critical role in altering the relative rates of a series of interconnected reactions and all warrant further investigation.
RESUMO
We have investigated the interaction of nitrogen with single-crystal iron pyrite FeS(2){100} surfaces in ultra-high vacuum. N(2) adsorbs molecularly at low temperatures, desorbing at 130 K, but does not adsorb dissociatively even at pressures up to 1 bar. Atomic surface N can, however, be obtained with nitrogen ions and/or excited neutral species, generated by passing N(2) through an ion gun. Substantial nitrogen-induced disorder is seen with both ions and neutrals, and no ordered N overlayers form; a decrease in the S/Fe ratio is seen when exposing to nitrogen ions. Recombinative desorption leads to temperature-programmed desorption peaks at 410 and 520-560 K which we associate with interstitial atomic N and substitutional ionic N, respectively, in the surface regions. Thermal repair of sputter damage necessitates segregation of bulk S to the surface, which, over repeated experiments, leads to gross cumulative damage to the bulk crystal. The desorption temperatures associated with recombinative desorption of atomic N from FeS(2){100} are significantly lower than those measured for Fe surfaces. This is linked to the inability of FeS(2){100} to dissociate N(2), but suggests that N(ads) will be significantly more able to react with other species than it is on Fe surfaces.
Assuntos
Ferro/química , Nitrogênio/isolamento & purificação , Sulfetos/química , Adsorção , Cristalização , Modelos Moleculares , Propriedades de Superfície , Temperatura , VácuoRESUMO
Supercapacitive swing adsorption (SSA) is a recently discovered electrochemically driven CO2 capture technology that promises significant efficiency improvements over traditional methods. A limitation of this approach is the relatively low CO2 adsorption capacity, and the underlying molecular mechanisms of SSA remain poorly understood, hindering optimization. Here we present a new device architecture for simultaneous electrochemical and gas-adsorption measurements, and use it to investigate the effects of charging protocols on SSA performance. We show that altering the voltage applied to charge the SSA device can significantly improve performance. Charging the gas-exposed electrode positively rather than negatively increases CO2 adsorption capacity and causes CO2 desorption rather than adsorption with charging. We also show that switching the voltage between positive and negative values further increases CO2 capacity. Previously proposed mechanisms of the SSA effect fail to explain these phenomena, so we present a new mechanism based on movement of CO2-derived species into and out of electrode micropores. Overall, this work advances our knowledge of electrochemical CO2 adsorption by supercapacitors, potentially leading to devices with increased uptake capacity and efficiency.
RESUMO
High-capacity Ni-rich layered metal oxide cathodes are highly desirable to increase the energy density of lithium-ion batteries. However, these materials suffer from poor cycling performance, which is exacerbated by increased cell voltage. We demonstrate here the detrimental effect of ethylene carbonate (EC), a core component in conventional electrolytes, when NMC811 (LiNi0.8Mn0.1Co0.1O2) is charged above 4.4 V vs Li/Li+-the onset potential for lattice oxygen release. Oxygen loss is enhanced by EC-containing electrolytes-compared to EC-free-and correlates with more electrolyte oxidation/breakdown and cathode surface degradation, which increase concurrently above 4.4 V. In contrast, NMC111 (LiNi0.33Mn0.33Co0.33O2), which does not release oxygen up to 4.6 V, shows a similar extent of degradation irrespective of the electrolyte. This work highlights the incompatibility between conventional EC-based electrolytes and Ni-rich cathodes (more generally, cathodes that release lattice oxygen such as Li-/Mn-rich and disordered rocksalt cathodes) and motivates further work on wider classes of electrolytes and additives.
RESUMO
The chemical and electrochemical reactions at the positive electrode-electrolyte interface in Li-ion batteries are hugely influential on cycle life and safety. Ni-rich layered transition metal oxides exhibit higher interfacial reactivity than their lower Ni-content analogues, reacting via mechanisms that are poorly understood. Here, we study the pivotal role of the electrolyte solvent, specifically cyclic ethylene carbonate (EC) and linear ethyl methyl carbonate (EMC), in determining the interfacial reactivity at charged LiNi0.33Mn0.33Co0.33O2 (NMC111) and LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes by using both single-solvent model electrolytes and the mixed solvents used in commercial cells. While NMC111 exhibits similar parasitic currents with EC-containing and EC-free electrolytes during high voltage holds in NMC/Li4Ti5O12 (LTO) cells, this is not the case for NMC811. Online gas analysis reveals that the solvent-dependent reactivity for Ni-rich cathodes is related to the extent of lattice oxygen release and accompanying electrolyte decomposition, which is higher for EC-containing than EC-free electrolytes. Combined findings from electrochemical impedance spectroscopy (EIS), TEM, solution NMR, ICP, and XPS reveal that the electrolyte solvent has a profound impact on the degradation of the Ni-rich cathode and the electrolyte. Higher lattice oxygen release with EC-containing electrolytes is coupled with higher cathode interfacial impedance, a thicker oxygen-deficient rock-salt surface reconstruction layer, more electrolyte solvent and salt breakdown, and higher amounts of transition metal dissolution. These processes are suppressed in the EC-free electrolyte, highlighting the incompatibility between Ni-rich cathodes and conventional electrolyte solvents. Finally, new mechanistic insights into the chemical oxidation pathways of electrolyte solvents and, critically, the knock-on chemical and electrochemical reactions that further degrade the electrolyte and electrodes curtailing battery lifetime are provided.
RESUMO
The asymmetric hydrogenation of alpha-ketoesters on cinchona-modified supported platinum particles is a prototype reaction in heterogeneous chiral catalysis. The catalysis literature shows that the reaction is highly metal-specific, that it displays rate-enhancement with respect to the racemic reaction on the nonmodified surface, and that the observed stereoselectivity is a sensitive function of substrate and modifier structure. This set of observations has proven difficult to rationalize within the context of existing models for the mechanism of the Orito reaction. The most widely discussed mechanistic models are based on the formation of chemisorbed 1:1 complexes through H-bonding between the quinuclidine function of the cinchona modifier and the prochiral, keto-carbonyl, function of the substrate. Recent surface science studies, as well as advances in the area of C-H...O hydrogen bonding, suggest that chemisorption-induced polarization may lead to an aromatic-carbonyl H-bonding interaction between the aromatic anchor of the modifier and the coadsorbed substrate. By specifying that the aromatic C-H...O interaction is to the prochiral carbonyl and that it is accompanied by a H-bonding interaction between the ester carbonyl and the quinuclidine function, we show that it is possible to rationalize essentially all of the catalysis literature for the Orito reaction in terms of a single molecular mechanism. The generality of the proposed mechanistic model is demonstrated by addressing data from the literature for a representative range of substrates, modifiers, solvents, and metals. Results of catalytic tests on an asymmetric diketone substrate are presented in support of the model.