Human gut Bacteroidetes can utilize yeast mannan through a selfish mechanism.

Yeasts, which have been a component of the human diet for at least 7,000 years, possess an elaborate cell wall α-mannan. The influence of yeast mannan on the ecology of the human microbiota is unknown. Here we show that yeast α-mannan is a viable food source for the Gram-negative bacterium Bacteroides thetaiotaomicron, a dominant member of the microbiota. Detailed biochemical analysis and targeted gene disruption studies support a model whereby limited cleavage of α-mannan on the surface generates large oligosaccharides that are subsequently depolymerized to mannose by the action of periplasmic enzymes. Co-culturing studies showed that metabolism of yeast mannan by B. thetaiotaomicron presents a 'selfish' model for the catabolism of this difficult to breakdown polysaccharide. Genomic comparison with B. thetaiotaomicron in conjunction with cell culture studies show that a cohort of highly successful members of the microbiota has evolved to consume sterically-restricted yeast glycans, an adaptation that may reflect the incorporation of eukaryotic microorganisms into the human diet.

Photoinduced Tyrosine Side Chain Fragmentation in IgG4-Fc: Mechanisms and Solvent Isotope Effects.

Immunoglobulin gamma (IgG) monoclonal antibodies (mAbs) are glycoproteins that have emerged as powerful and promising protein therapeutics. During the process of production, storage and transportation, exposure to ambient light is inevitable, which can cause protein physical and chemical degradation. For mechanistic studies of photodegradation, we have exposed IgG4-Fc to UV light. The photoirradiation of IgG4-Fc with monochromatic UVC light at λ = 254 nm and UVB light with λmax = 305 nm in air-saturated solutions revealed multiple photoproducts originating from tyrosine side chain fragmentation at Tyr300, Tyr373, and Tyr436. Tyr side chain fragmentation yielded either Gly or various backbone cleavage products, including glyoxal amide derivatives. A mechanism is proposed involving intermediate Tyr radical cation formation, either through direct light absorption of Tyr or through electron transfer to an initial Trp radical cation, followed by elimination of quinone methide. Product formation showed either no (cleavage of Tyr373) or significant (cleavage of Tyr436) inverse product solvent isotope effects (SIEs), indicating a role for proton transfer in the cleavage mechanism of Tyr436. The role of electron transfer in the cleavage of Tyr436 was further investigated through mutation of an adjacent Trp381. This is the first observation of a photoinduced Tyr side chain cleavage reactions in a protein.

A Multidimensional Analytical Comparison of Remicade and the Biosimilar Remsima.

In April 2016, the Food and Drug Administration approved the first biosimilar monoclonal antibody (mAb), Inflectra/Remsima (Celltrion), based off the original product Remicade (infliximab, Janssen). Biosimilars promise significant cost savings for patients, but the unavoidable differences between innovator and copycat biologics raise questions regarding product interchangeability. In this study, Remicade and Remsima were examined by native mass spectrometry, ion mobility, and quantitative peptide mapping. The levels of oxidation, deamidation, and mutation of individual amino acids were remarkably similar. We found different levels of C-terminal truncation, soluble protein aggregates, and glycation that all likely have a limited clinical impact. Importantly, we identified more than 25 glycoforms for each product and observed glycoform population differences, with afucosylated glycans accounting for 19.7% of Remicade and 13.2% of Remsima glycoforms, which translated into a 2-fold reduction in the level of FcγIIIa receptor binding for Remsima. While this difference was acknowledged in Remsima regulatory filings, our glycoform analysis and receptor binding results appear to be somewhat different from the published values, likely because of methodological differences between laboratories and improved glycoform identification by our laboratory using a peptide map-based method. Our mass spectrometry-based analysis provides rapid and robust analytical information vital for biosimilar development. We have demonstrated the utility of our multiple-attribute monitoring workflow using the model mAbs Remicade and Remsima and have provided a template for analysis of future mAb biosimilars.

Synthesis of a Bifunctional Peptide Inhibitor-IgG1 Fc Fusion That Suppresses Experimental Autoimmune Encephalomyelitis.

Multiple sclerosis (MS) is a neurodegenerative disease that is estimated to affect over 2.3 million people worldwide. The exact cause for this disease is unknown but involves immune system attack and destruction of the myelin protein surrounding the neurons in the central nervous system. One promising class of compounds that selectively prevent the activation of immune cells involved in the pathway leading to myelin destruction are bifunctional peptide inhibitors (BPIs). Treatment with BPIs reduces neurodegenerative symptoms in experimental autoimmune encephalomyelitis (EAE), a mouse model of MS. In this work, as an effort to further improve the bioactivity of BPIs, BPI peptides were conjugated to the N- and C-termini of the fragment crystallizable (Fc) region of the human IgG1 antibody. Initially, the two peptides were conjugated to IgG1 Fc using recombinant DNA technology. However, expression in yeast resulted in low yields and one of the peptides being heavily proteolyzed. To circumvent this problem, the poorly expressed peptide was instead produced by solid phase peptide synthesis and conjugated enzymatically using a sortase-mediated ligation. The sortase-mediated method showed near-complete conjugation yield as observed by SDS-PAGE and mass spectrometry in small-scale reactions. This method was scaled up to obtain sufficient quantities for testing the BPI-Fc fusion in mice induced with EAE. Compared to the PBS-treated control, mice treated with the BPI-Fc fusion showed significantly reduced disease symptoms, did not experience weight loss, and showed reduced de-myelination. These results demonstrate that the BPI peptides were highly active at suppressing EAE when conjugated to the large Fc scaffold in this manner.

Conjugation site heterogeneity causes variable electrostatic properties in Fc conjugates.

Immunoconjugates, including antibody-drug conjugates and Fc-conjugates, represent a rapidly growing class of therapeutics undergoing clinical development. Despite their growing popularity, the high intrinsic heterogeneity of immunoconjugates often complicates the development process and limits their widespread application. In particular, immunoconjugate charge variants exhibit markedly different colloidal stabilities, solubilities, pharmacokinetics, and tissue distributions. Charge variants arise spontaneously due to degradation and, depending on the type of drug, linker, and conjugation site, through drug conjugation. Electrostatic changes in naked antibodies often result in poor performance characteristics, and therefore, charge alterations due to degradation are critical to control. Charge properties are expected to be equally important to producing well-behaved ADCs. Charge-based methods of analysis, such as isoelectric focusing and ion exchange chromatography, are capable of probing the underlying complexities within immunoconjugate drug products. Despite the utility of these methods, there are only a few published reports of charge-based assays applied to immunoconjugates. In the present study, we sought to identify the effects of chemical conjugation on the electrostatic properties of Fc-conjugates. In order to minimize the effects of post-translational modifications (e.g., deamidation), a single Fc charge variant was isolated prior to conjugation of a fluorescent probe, Alexa Fluor 350, to the side chains of lysine residues. The resulting Fc-conjugates were assessed by a variety of analytical techniques, including isoelectric focusing and ion exchange chromatography, to determine their charge properties.

Modular assembly of dimeric HIV fusion inhibitor peptides with enhanced antiviral potency.

The HIV-1 envelope gp120/gp41 glycoprotein complex plays a critical role in virus-host cell membrane fusion and has been a focus for the development of HIV fusion inhibitors. In this Letter, we present the synthesis of dimers of HIV fusion inhibitor peptides C37H6 and CP32M, which target the trimeric gp41 in the pre-hairpin intermediate state to inhibit membrane fusion. Reactive peptide modules were synthesized using native chemical ligation and then assembled into dimers with varying linker lengths using Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) 'click' chemistry. Cell-cell fusion inhibition assays demonstrated that dimers with a (PEG)7 linker showed enhanced antiviral potency over the corresponding monomers. Moreover, the bio-orthogonal nature of the CuAAC 'click' reaction provides a practical way to assemble heterodimers of HIV fusion inhibitors. Heterodimers consisting of the T20-sensitive strain inhibitor C37H6 and the T20-resistant strain inhibitor CP32M were produced that may have broader spectrum activities against both T20-sensitive and T20-resistant strains.

Study of on-resin convergent synthesis of N-linked glycopeptides containing a large high mannose N-linked oligosaccharide.

Here we present a convergent on-resin glycosylamine coupling strategy for solid phase N-linked glycopeptide synthesis, and apply it to the synthesis of high mannose containing glycopeptides. In this strategy, the 2-phenylisopropyl protecting group is used as an orthogonal handle to create glycosylation sites on-resin after synthesis of nonglycosylated peptides. In addition to allowing selective deprotection of aspartic acid residues for creation of glycosylation sites, the 2-phenylisopropyl protecting group also efficiently suppresses aspartimide formation during peptide synthesis. The key step of on-resin glycosylamine coupling to an aspartic acid residue was first optimized for a small sugar, N-acetylglucosamine, and then applied to a much larger high mannose oligosaccharide, Man(8)GlcNAc(2). Satisfying coupling yields were obtained for both small and large sugars. The use of on-resin glycosylamine coupling simplifies purification of N-linked glycopeptides, and also allows convenient recovery of unreacted valuable large oligosaccharides. This approach was applied to the solid phase synthesis of glycosylated forms of the 34 amino acid HIV-1 gp41 C34 glycopeptide, which is an HIV-1 entry inhibitor. The HIV-1 entry inhibition assay of synthesized glycopeptides showed the retention of bioactivity of high mannose Man(8)GlcNAc(2)-C34.

Synthesis of N-terminally linked protein and peptide dimers by native chemical ligation.

Dimerization can be utilized to double the molecular weight of proteins and peptides and potentially increase their avidity of binding to target receptors. These dimerization effects may be utilized to increase in vivo half-lives in a manner similar to PEGylation and may also improve biological activity. In this paper, we report a new strategy for the synthesis of N-terminally linked protein and peptide homodimers utilizing native chemical ligation to conjugate a short dithioester linker to the N-terminal cysteines of protein and peptide monomers to form dimers in a single step. This strategy is general and has been applied to the production of dimers from three recombinantly expressed polypeptides, the IgG binding domain Protein G, an HIV entry inhibitor peptide C37H6, and human interleukin-1 receptor antagonist (IL-1ra). The biological activities of the C37H6 and IL-1ra dimers produced by these methods were retained or even slightly increased when compared to their corresponding monomers.

Multifaceted assessment of rituximab biosimilarity: The impact of glycan microheterogeneity on Fc function.

Biosimilars are poised to reduce prices and increase patient access to expensive, but highly effective biologic products. However, questions still remain about the degree of similarity and scarcity of information on biosimilar products from outside of the US/EU in the public domain. Thus, as an independent entity, we performed a comparative analysis between the innovator, Rituxan® (manufactured by Genentech/Roche), and a Russian rituximab biosimilar, Acellbia® (manufactured by Biocad). We evaluated biosimilarity of these two products by a variety of state-of-the-art analytical mass spectrometry techniques, including tandem MS mapping, HX-MS, IM-MS, and intact MS. Both were found to be generally similar regarding primary and higher order structure, though differences were identified in terms of glycoform distribution levels of C-terminal Lys, N-terminal pyroGlu, charge variants and soluble aggregates. Notably, we confirmed that the biosimilar had a higher level of afucosylated glycans, resulting in a stronger FcγIIIa binding affinity and increased ADCC activity. Taken together, our work provides a comprehensive comparison of Rituxan® and Acellbia®.

Targeting a homogeneously glycosylated antibody Fc to bind cancer cells using a synthetic receptor ligand.

The targeting of a glycosylated antibody Fc fragment to bind to cancer cells by site-selective incorporation of a synthetic ligand is described. Homogeneously glycosylated immunoglobulin G subclass 1 fragment crystallizable (IgG1 Fc) was produced by expression in a glycosylation-deficient yeast strain and subsequent treatment with mannosidase IA. A N-terminal cysteine was generated on the expressed IgG1 Fc by utilizing proteolytic processing enzymes in the yeast secretory pathway. A cyclic RGD peptide thioester 2 was synthesized and then site-selectively attached to the N-terminus of the IgG1 Fc glycoprotein using native chemical ligation. The resulting chemically modified antibody fragment, RGD-Man(5)-IgG1 Fc (5), retained biological activity similar to that of the free cyclic RGD peptide 1 when assayed for its ability to both promote and inhibit the adhesion of alpha(v)beta(3) integrin receptor-expressing WM-115 melanoma cells. In addition, fluorescent microscopy experiments were conducted using FITC-labeled 5 and confirmed binding of 5 to WM-115 melanoma cells. Site-selectively modified antibody fragments such as the one described here may be used to combine the beneficial properties of synthetic receptor ligands with antibody fragments to develop useful biochemical tools and improved therapeutics. The methods described here can also be used to produce glycoprotein fragments for the chemoenzymatic synthesis of homogeneous glycoproteins.

Synthesis of polymerizable protein monomers for protein-acrylamide hydrogel formation.

A novel method to produce protein polymer conjugates for protein-acrylamide hydrogel formation is described. Alkenes are incorporated onto the N-terminus of expressed proteins to produce polymerizable protein monomers that can be utilized in protein-acrylamide copolymerization. A 4-vinylbenzoic acid thioester was synthesized and attached to the N-termini of two protein models, the immunoglobulin-binding protein Protein G and the bacterial enzyme xanthine-guanine phosphoribosyltransferase (GPRT), utilizing native chemical ligation. N-terminal cysteine containing proteins utilized in native chemical ligation reactions were generated from His-tagged fusion proteins using tobacco etch virus NIa (TEV) protease cleavage. The 4-vinylbenzyl functionalized proteins were good substrates for immobilizing proteins into polyacrylamide hydrogels via free radical induced protein-acrylamide copolymerization. The protein copolymerization procedures developed in this report are mild enough to allow proteins to retain measurable biological activity as demonstrated by the retention of immunoglobulin binding ability by immobilized Protein G and enzymatic activity of immobilized GPRT.

Increasing solubility of proteins and peptides by site-specific modification with betaine.

Proteins and peptides with low solubility and which aggregate are often encountered in biochemical studies and in pharmaceutical applications of polypeptides. Here, we report a new strategy to improve solubility and prevent aggregation of polypeptides using site-specific modification with the small molecule betaine, which contains a quaternary ammonium moiety. Betaine was site-selectively attached to the N-termini of two aggregation-prone polypeptide models, the bacterial enzyme xanthine-guanine phosphoribosyltransferase (CG-GPRT) and the HIV entry inhibitor peptide CG-T20, utilizing native chemical ligation. N-terminal cysteines for the betaine ligation reactions were generated from His-tagged fusion proteins using TEV protease cleavage. Ligation of the betaine thioester (1) to the N-terminal cysteine-containing polypeptide models proceeded in high yield, though denaturing conditions were required for CG-T20 due to the hydrophobic nature of this peptide. CD spectroscopy and GPRT activity assays indicate that the betaine modification of CG-GPRT and CG-T20 does not significantly affect structure or activity of the polypeptides. Solubility and turbidity measurements of betaine-modified and unmodified polypeptides demonstrate that betaine modification can greatly increase solubility. Finally, it is shown that betaine-modified CG-T20 acts as an inhibitor of the aggregation of unmodified CG-T20.

Expression and characterization of human glycosylated interleukin-1 receptor antagonist in Pichia pastoris.

Interleukin-1 receptor antagonist is an inhibitor of the pro-inflammatory action of interleukin-1. The gene encoding for interleukin-1 receptor antagonist (IL-1ra) was cloned into a Pichia pastoris expression vector pPICzalphaA (Invitrogen, USA) and transformed into P. pastoris strain SMD1168H. Multi-copy selection of the gene produced a high expressing strain of IL-1ra that produced 17mg/L of total secreted purified protein. The IL-1ra produced in P. pastoris was a mixture of glycosylated and non-glycosylated IL-1ra where 70% of the total protein was glycosylated. SP-Sepharose purification allowed for separation of the two expressed forms of IL-1ra, which permits biochemical investigation of glycosylated and non-glycosylated IL-1ra using one expression system. Mass spectrometric analysis revealed the expression of the full-length protein and that the glycosylated IL-1ra contained high mannose glycoforms that ranged from Man(9)GlcNAc(2) to Man(14)GlcNAc(2).

Impact of Glycosylation on the Local Backbone Flexibility of Well-Defined IgG1-Fc Glycoforms Using Hydrogen Exchange-Mass Spectrometry.

We have used hydrogen exchange-mass spectrometry to characterize local backbone flexibility of 4 well-defined IgG1-Fc glycoforms expressed and purified from Pichia pastoris, 2 of which were prepared using subsequent in vitro enzymatic treatments. Progressively decreasing the size of the N-linked N297 oligosaccharide from high mannose (Man8-Man12), to Man5, to GlcNAc, to nonglycosylated N297Q resulted in progressive increases in backbone flexibility. Comparison of these results with recently published physicochemical stability and Fcγ receptor binding data with the same set of glycoproteins provide improved insights into correlations between glycan structure and these pharmaceutical properties. Flexibility significantly increased upon glycan truncation in 2 potential aggregation-prone regions. In addition, a correlation was established between increased local backbone flexibility and increased deamidation at asparagine 315. Interestingly, the opposite trend was observed for oxidation of tryptophan 277 where faster oxidation correlated with decreased local backbone flexibility. Finally, a trend of increasing C'E glycopeptide loop flexibility with decreasing glycan size was observed that correlates with their FcγRIIIa receptor binding properties. These well-defined IgG1-Fc glycoforms serve as a useful model system to identify physicochemical stability and local backbone flexibility data sets potentially discriminating between various IgG glycoforms for potential applicability to future comparability or biosimilarity assessments.

Structural characterization of the Man5 glycoform of human IgG3 Fc.

Immunoglobulin G (IgG) consists of four subclasses in humans: IgG1, IgG2, IgG3 and IgG4, which are highly conserved but have unique differences that result in subclass-specific effector functions. Though IgG1 is the most extensively studied IgG subclass, study of other subclasses is important to understand overall immune function and for development of new therapeutics. When compared to IgG1, IgG3 exhibits a similar binding profile to Fcγ receptors and stronger activation of complement. All IgG subclasses are glycosylated at N297, which is required for Fcγ receptor and C1q complement binding as well as maintaining optimal Fc conformation. We have determined the crystal structure of homogenously glycosylated human IgG3 Fc with a GlcNAc2Man5 (Man5) high mannose glycoform at 1.8Šresolution and compared its structural features with published structures from the other IgG subclasses. Although the overall structure of IgG3 Fc is similar to that of other subclasses, some structural perturbations based on sequence differences were revealed. For instance, the presence of R435 in IgG3 (and H435 in the other IgG subclasses) has been implicated to result in IgG3-specific properties related to binding to protein A, protein G and the neonatal Fc receptor (FcRn). The IgG3 Fc structure helps to explain some of these differences. Additionally, protein-glycan contacts observed in the crystal structure appear to correlate with IgG3 affinity for Fcγ receptors as shown by binding studies with IgG3 Fc glycoforms. Finally, this IgG3 Fc structure provides a template for further studies aimed at engineering the Fc for specific gain of function.

Biosimilarity under stress: A forced degradation study of Remicade® and Remsima™.

Remsima™ (infliximab) is the first biosimilar monoclonal antibody (mAb) approved by the European Medical Agency and the US Food and Drug Administration. Remsima™ is highly similar to its reference product, Remicade®, with identical formulation components. The 2 products, however, are not identical; Remsima™ has higher levels of soluble aggregates, C-terminal lysine truncation, and fucosylated glycans. To understand if these attribute differences could be amplified during forced degradation, solutions and lyophilized powders of the 2 products were subjected to stress at elevated temperature (40-60°C) and humidity (dry-97% relative humidity). Stress-induced aggregation and degradation profiles were similar for the 2 products and resulted in loss of infliximab binding to tumor necrosis factor and FcγRIIIa. Appearances of protein aggregates and hydrolysis products were time- and humidity-dependent, with similar degradation rates observed for the reference and biosimilar products. Protein powder incubations at 40°C/97% relative humidity resulted in partial mAb unfolding and increased asparagine deamidation. Minor differences in heat capacity, fluorescence, levels of subvisible particulates, deamidation and protein fragments were observed in the 2 stressed products, but these differences were not statistically significant. The protein solution instability at 60°C, although quite significant, was also similar for both products. Despite the small initial analytical differences, Remicade® and Remsima™ displayed similar degradation mechanisms and kinetics. Thus, our results show that the 2 products are highly similar and infliximab's primary sequence largely defines their protein instabilities compared with the limited influence of small initial purity and glycosylation differences in the 2 products.

Production, Characterization, and Biological Evaluation of Well-Defined IgG1 Fc Glycoforms as a Model System for Biosimilarity Analysis.

Four different well-defined IgG1 Fc glycoforms are proposed as a model system to examine important biological and physicochemical features for protein drug biosimilar analyses. The IgG1 Fc glycoforms were produced by yeast expression combined with in vitro enzymatic synthesis as a series of sequentially truncated high-mannose IgG1 Fc glycoforms with an anticipated range of biological activity and structural stability. Initial characterization with mass spectrometry, SDS-PAGE, size exclusion HPLC, and capillary isoelectric focusing confirmed that the glycoproteins are overall highly similar with the only major difference being glycosylation state. Binding to the activating Fc receptor, FcγRIIIa was used to evaluate the potential biological activity of the IgG1 Fc glycoproteins. Two complementary methods using biolayer interferometry, 1 with protein G-immobilized IgG1 Fc and the other with streptavidin-immobilized FcγRIIIa, were developed to assess FcγRIIIa affinity in kinetic binding studies. The high-mannose IgG1 Fc and Man5-IgG1 Fc glycoforms were highly similar to one another with high affinity for FcγRIIIa, whereas GlcNAc-Fc had weak affinity, and the nonglycosylated N297Q-Fc had no measurable affinity for FcγRIIIa. These 4 IgG1 Fc glycoforms were also evaluated in terms of physical and chemical stability profiles and then used as a model system to mathematically assess overall biosimilarity, as described in a series of companion articles.

Correlating the Impact of Well-Defined Oligosaccharide Structures on Physical Stability Profiles of IgG1-Fc Glycoforms.

As part of a series of articles in this special issue describing 4 well-defined IgG1-Fc glycoforms as a model system for biosimilarity analysis (high mannose-Fc, Man5-Fc, GlcNAc-Fc and N297Q-Fc aglycosylated), the focus of this work is comparisons of their physical properties. A trend of decreasing apparent solubility (thermodynamic activity) by polyethylene glycol precipitation (pH 4.5, 6.0) and lower conformational stability by differential scanning calorimetry (pH 4.5) was observed with reducing size of the N297-linked oligosaccharide structures. Using multiple high-throughput biophysical techniques, the physical stability of the Fc glycoproteins was then measured in 2 formulations (NaCl and sucrose) across a wide range of temperatures (10°C-90°C) and pH (4.0-7.5) conditions. The data sets were used to construct 3-index empirical phase diagrams and radar charts to visualize the regions of protein structural stability. Each glycoform showed improved stability in the sucrose (vs. salt) formulation. The HM-Fc and Man5-Fc displayed the highest relative stability, followed by GlcNAc-Fc, with N297Q-Fc being the least stable. Thus, the overall physical stability profiles of the 4 IgG1-Fc glycoforms also show a correlation with oligosaccharide structure. These data sets are used to develop a mathematical model for biosimilarity analysis (as described in a companion article by Kim et al. in this issue).

Biosimilarity Assessments of Model IgG1-Fc Glycoforms Using a Machine Learning Approach.

Biosimilarity assessments are performed to decide whether 2 preparations of complex biomolecules can be considered "highly similar." In this work, a machine learning approach is demonstrated as a mathematical tool for such assessments using a variety of analytical data sets. As proof-of-principle, physical stability data sets from 8 samples, 4 well-defined immunoglobulin G1-Fragment crystallizable glycoforms in 2 different formulations, were examined (see More et al., companion article in this issue). The data sets included triplicate measurements from 3 analytical methods across different pH and temperature conditions (2066 data features). Established machine learning techniques were used to determine whether the data sets contain sufficient discriminative power in this application. The support vector machine classifier identified the 8 distinct samples with high accuracy. For these data sets, there exists a minimum threshold in terms of information quality and volume to grant enough discriminative power. Generally, data from multiple analytical techniques, multiple pH conditions, and at least 200 representative features were required to achieve the highest discriminative accuracy. In addition to classification accuracy tests, various methods such as sample space visualization, similarity analysis based on Euclidean distance, and feature ranking by mutual information scores are demonstrated to display their effectiveness as modeling tools for biosimilarity assessments.