Identification of genetic loci in lettuce mediating quantitative resistance to fungal pathogens.

KEY MESSAGE: We demonstrate genetic variation for quantitative resistance against important fungal pathogens in lettuce and its wild relatives, map loci conferring resistance and predict key molecular mechanisms using transcriptome profiling. Lactuca sativa L. (lettuce) is an important leafy vegetable crop grown and consumed globally. Chemicals are routinely used to control major pathogens, including the causal agents of grey mould (Botrytis cinerea) and lettuce drop (Sclerotinia sclerotiorum). With increasing prevalence of pathogen resistance to fungicides and environmental concerns, there is an urgent need to identify sources of genetic resistance to B. cinerea and S. sclerotiorum in lettuce. We demonstrated genetic variation for quantitative resistance to B. cinerea and S. sclerotiorum in a set of 97 diverse lettuce and wild relative accessions, and between the parents of lettuce mapping populations. Transcriptome profiling across multiple lettuce accessions enabled us to identify genes with expression correlated with resistance, predicting the importance of post-transcriptional gene regulation in the lettuce defence response. We identified five genetic loci influencing quantitative resistance in a F6 mapping population derived from a Lactuca serriola (wild relative) × lettuce cross, which each explained 5-10% of the variation. Differential gene expression analysis between the parent lines, and integration of data on correlation of gene expression and resistance in the diversity set, highlighted potential causal genes underlying the quantitative trait loci.

The genetic basis of water-use efficiency and yield in lettuce.

BACKGROUND: Water supply limits agricultural productivity of many crops including lettuce. Identifying cultivars within crop species that can maintain productivity with reduced water supply is a significant challenge, but central to developing resilient crops for future water-limited climates. We investigated traits known to be related to water-use efficiency (WUE) and yield in lettuce, a globally important leafy salad crop, in a recombinant inbred line (RIL) lettuce mapping population, produced from a cross between the cultivated Lactuca sativa L. cv. Salinas and its wild progenitor L. serriola L. RESULTS: Wild and cultivated lettuce differed in their WUE and we observed transgressive segregation in yield and water-use traits in the RILs. Quantitative trait loci (QTL) analysis identified genomic regions controlling these traits under well-watered and droughted conditions. QTL were detected for carbon isotope discrimination, transpiration, stomatal conductance, leaf temperature and yield, controlling 4-23 % of the phenotypic variation. A QTL hotspot was identified on chromosome 8 that controlled carbon isotope discrimination, stomatal conductance and yield under drought. Several promising candidate genes in this region were associated with WUE, including aquaporins, late embryogenesis abundant proteins, an abscisic acid-responsive element binding protein and glutathione S-transferases involved in redox homeostasis following drought stress were also identified. CONCLUSIONS: For the first time, we have characterised the genetic basis of WUE of lettuce, a commercially important and water demanding crop. We have identified promising candidate genomic regions determining WUE and yield under well-watered and water-limiting conditions, providing important pre-breeding data for future lettuce selection and breeding where water productivity will be a key target.

Drone phenotyping and machine learning enable discovery of loci regulating daily floral opening in lettuce.

Flower opening and closure are traits of reproductive importance in all angiosperms because they determine the success of self- and cross-pollination. The temporal nature of this phenotype rendered it a difficult target for genetic studies. Cultivated and wild lettuce, Lactuca spp., have composite inflorescences that open only once. An L. serriola×L. sativa F6 recombinant inbred line (RIL) population differed markedly for daily floral opening time. This population was used to map the genetic determinants of this trait; the floral opening time of 236 RILs was scored using time-course image series obtained by drone-based phenotyping on two occasions. Floral pixels were identified from the images using a support vector machine with an accuracy >99%. A Bayesian inference method was developed to extract the peak floral opening time for individual genotypes from the time-stamped image data. Two independent quantitative trait loci (QTLs; Daily Floral Opening 2.1 and qDFO8.1) explaining >30% of the phenotypic variation in floral opening time were discovered. Candidate genes with non-synonymous polymorphisms in coding sequences were identified within the QTLs. This study demonstrates the power of combining remote sensing, machine learning, Bayesian statistics, and genome-wide marker data for studying the genetics of recalcitrant phenotypes.

Quantitative Trait Loci and Candidate Genes Associated with Photoperiod Sensitivity in Lettuce (Lactuca spp.).

KEY MESSAGE: A population of lettuce that segregated for photoperiod sensitivity was planted under long-day and short-day conditions. Genetic mapping revealed two distinct sets of QTLs controlling daylength-independent and photoperiod-sensitive flowering time. The molecular mechanism of flowering time regulation in lettuce is of interest to both geneticists and breeders because of the extensive impact of this trait on agricultural production. Lettuce is a facultative long-day plant which changes in flowering time in response to photoperiod. Variations exist in both flowering time and the degree of photoperiod sensitivity among accessions of wild (Lactuca serriola) and cultivated (L. sativa) lettuce. An F6 population of 236 recombinant inbred lines (RILs) was previously developed from a cross between a late-flowering, photoperiod-sensitive L. serriola accession and an early-flowering, photoperiod-insensitive L. sativa accession. This population was planted under long-day (LD) and short-day (SD) conditions in a total of four field and screenhouse trials; the developmental phenotype was scored weekly in each trial. Using genotyping-by-sequencing (GBS) data of the RILs, quantitative trait loci (QTL) mapping revealed five flowering time QTLs that together explained more than 20% of the variation in flowering time under LD conditions. Using two independent statistical models to extract the photoperiod sensitivity phenotype from the LD and SD flowering time data, we identified an additional five QTLs that together explained more than 30% of the variation in photoperiod sensitivity in the population. Orthology and sequence analysis of genes within the nine QTLs revealed potential functional equivalents in the lettuce genome to the key regulators of flowering time and photoperiodism, FD and CONSTANS, respectively, in Arabidopsis.

Identification and mapping of new genes for resistance to downy mildew in lettuce.

KEY MESSAGE: Eleven new major resistance genes for lettuce downy mildew were introgressed from wild Lactuca species and mapped to small regions in the lettuce genome. Downy mildew, caused by the oomycete pathogen Bremia lactucae Regel, is the most important disease of lettuce (Lactuca sativa L.). The most effective method to control this disease is by using resistant cultivars expressing dominant resistance genes (Dm genes). In order to counter changes in pathogen virulence, multiple resistance genes have been introgressed from wild species by repeated backcrosses to cultivated lettuce, resulting in numerous near-isogenic lines (NILs) only differing for small chromosome regions that are associated with resistance. Low-pass, whole genome sequencing of 11 NILs was used to identify the chromosome segments introgressed from the wild donor species. This located the candidate chromosomal positions for resistance genes as well as additional segments. F2 segregating populations derived from these NILs were used to genetically map the resistance genes to one or two loci in the lettuce reference genome. Precise knowledge of the location of new Dm genes provides the foundation for marker-assisted selection to breed cultivars with multiple genes for resistance to downy mildew.

Genome-wide functional analyses of plant coiled-coil NLR-type pathogen receptors reveal essential roles of their N-terminal domain in oligomerization, networking, and immunity.

The ability to induce a defense response after pathogen attack is a critical feature of the immune system of any organism. Nucleotide-binding leucine-rich repeat receptors (NLRs) are key players in this process and perceive the occurrence of nonself-activities or foreign molecules. In plants, coevolution with a variety of pests and pathogens has resulted in repertoires of several hundred diverse NLRs in single individuals and many more in populations as a whole. However, the mechanism by which defense signaling is triggered by these NLRs in plants is poorly understood. Here, we show that upon pathogen perception, NLRs use their N-terminal domains to transactivate other receptors. Their N-terminal domains homo- and heterodimerize, suggesting that plant NLRs oligomerize upon activation, similar to the vertebrate NLRs; however, consistent with their large number in plants, the complexes are highly heterometric. Also, in contrast to metazoan NLRs, the N-terminus, rather than their centrally located nucleotide-binding (NB) domain, can mediate initial partner selection. The highly redundant network of NLR interactions in plants is proposed to provide resilience to perturbation by pathogens.

Genetics of Partial Resistance Against Verticillium dahliae Race 2 in Wild and Cultivated Lettuce.

Lettuce (Lactuca sativa) is one of the most economically important vegetables in the United States, with approximately 50% of the domestic production concentrated in the Salinas Valley of California. Verticillium wilt, caused by races 1 and 2 of the fungal pathogen Verticillium dahliae, poses a major threat to lettuce production in this area. Although resistance governed by a single dominant gene against race 1 has previously been identified and is currently being incorporated into commercial cultivars, identification of resistance against race 2 has been challenging and no lines with complete resistance have been identified. In this study, we screened germplasm for resistance and investigated the genetics of partial resistance against race 2 using three mapping populations derived from crosses involving L. sativa × L. sativa and L. serriola × L. sativa. The inheritance of resistance in Lactuca species against race 2 is complex but a common quantitative trait locus (QTL) on linkage group 6, designated qVERT6.1 (quantitative Verticillium dahliae resistance on LG 6, first QTL), was detected in multiple populations. Additional race 2 resistance QTLs located in several linkage groups were detected in individual populations and environments. Because resistance in lettuce against race 2 is polygenic with a large genotype by environment interaction, breeding programs to incorporate these resistance genes should be aware of this complexity as they implement strategies to control race 2.

The genetics of resistance to lettuce drop (Sclerotinia spp.) in lettuce in a recombinant inbred line population from Reine des Glaces × Eruption.

KEY MESSAGE: Two QTLs for resistance to lettuce drop, qLDR1.1 and qLDR5.1, were identified. Associated SNPs will be useful in breeding for lettuce drop and provide the foundation for future molecular analysis. Lettuce drop, caused by Sclerotinia minor and S. sclerotiorum, is an economically important disease of lettuce. The association of resistance to lettuce drop with the commercially undesirable trait of fast bolting has hindered the integration of host resistance in control of this disease. Eruption is a slow-bolting cultivar that exhibits a high level of resistance to lettuce drop. Eruption also is completely resistant to Verticillium wilt caused by race 1 of Verticillium dahliae. A recombinant inbred line population from the cross Reine des Glaces × Eruption was genotyped by sequencing and evaluated for lettuce drop and bolting in separate fields infested with either S. minor or V. dahliae. Two quantitative trait loci (QTLs) for lettuce drop resistance were consistently detected in at least two experiments, and two other QTLs were identified in another experiment; the alleles for resistance at all four QTLs originated from Eruption. A QTL for lettuce drop resistance on linkage group (LG) 5, qLDR5.1, was consistently detected in all experiments and explained 11 to 25% of phenotypic variation. On LG1, qLDR1.1 was detected in two experiments explaining 9 to 12% of the phenotypic variation. Three out of four resistance QTLs are distinct from QTLs for bolting; qLDR5.1 is pleiotropic or closely linked with a QTL for early bolting; however, the rate of bolting shows only a small effect on the variance in resistance observed at this locus. The SNP markers linked with these QTLs will be useful in breeding for resistance through marker-assisted selection.

Genetic Variation for Thermotolerance in Lettuce Seed Germination Is Associated with Temperature-Sensitive Regulation of ETHYLENE RESPONSE FACTOR1 (ERF1).

Seeds of most lettuce (Lactuca sativa) cultivars are susceptible to thermoinhibition, or failure to germinate at temperatures above approximately 28°C, creating problems for crop establishment in the field. Identifying genes controlling thermoinhibition would enable the development of cultivars lacking this trait and, therefore, being less sensitive to high temperatures during planting. Seeds of a primitive accession (PI251246) of lettuce exhibited high-temperature germination capacity up to 33°C. Screening a recombinant inbred line population developed from PI215246 and cv Salinas identified a major quantitative trait locus (Htg9.1) from PI251246 associated with the high-temperature germination phenotype. Further genetic analyses discovered a tight linkage of the Htg9.1 phenotype with a specific DNA marker (NM4182) located on a single genomic sequence scaffold. Expression analyses of the 44 genes encoded in this genomic region revealed that only a homolog of Arabidopsis (Arabidopsis thaliana) ETHYLENE RESPONSE FACTOR1 (termed LsERF1) was differentially expressed between PI251246 and cv Salinas seeds imbibed at high temperature (30°C). LsERF1 belongs to a large family of transcription factors associated with the ethylene-signaling pathway. Physiological assays of ethylene synthesis, response, and action in parental and near-isogenic Htg9.1 genotypes strongly implicate LsERF1 as the gene responsible for the Htg9.1 phenotype, consistent with the established role for ethylene in germination thermotolerance of Compositae seeds. Expression analyses of genes associated with the abscisic acid and gibberellin biosynthetic pathways and results of biosynthetic inhibitor and hormone response experiments also support the hypothesis that differential regulation of LsERF1 expression in PI251246 seeds elevates their upper temperature limit for germination through interactions among pathways regulated by these hormones. Our results support a model in which LsERF1 acts through the promotion of gibberellin biosynthesis to counter the inhibitory effects of abscisic acid and, therefore, promote germination at high temperatures.

Resistance to Downy Mildew in Lettuce 'La Brillante' is Conferred by Dm50 Gene and Multiple QTL.

Many cultivars of lettuce (Lactuca sativa L.) are susceptible to downy mildew, a nearly globally ubiquitous disease caused by Bremia lactucae. We previously determined that Batavia type cultivar 'La Brillante' has a high level of field resistance to the disease in California. Testing of a mapping population developed from a cross between 'Salinas 88' and La Brillante in multiple field and laboratory experiments revealed that at least five loci conferred resistance in La Brillante. The presence of a new dominant resistance gene (designated Dm50) that confers complete resistance to specific isolates was detected in laboratory tests of seedlings inoculated with multiple diverse isolates. Dm50 is located in the major resistance cluster on linkage group 2 that contains at least eight major, dominant Dm genes conferring resistance to downy mildew. However, this Dm gene is ineffective against the isolates of B. lactucae prevalent in the field in California and the Netherlands. A quantitative trait locus (QTL) located at the Dm50 chromosomal region (qDM2.2) was detected, though, when the amount of disease was evaluated a month before plants reached harvest maturity. Four additional QTL for resistance to B. lactucae were identified on linkage groups 4 (qDM4.1 and qDM4.2), 7 (qDM7.1), and 9 (qDM9.2). The largest effect was associated with qDM7.1 (up to 32.9% of the total phenotypic variance) that determined resistance in multiple field experiments. Markers identified in the present study will facilitate introduction of these resistance loci into commercial cultivars of lettuce.

Mapping taste and flavour traits to genetic markers in lettuce Lactuca sativa.

Lettuce is the most highly consumed raw leafy vegetable crop eaten worldwide, making it nutritionally important in spite of its comparatively low nutrient density in relation to other vegetables. However, the perception of bitterness caused by high levels of sesquiterpenoid lactones and comparatively low levels of sweet tasting sugars limits palatability. To assess variation in nutritional and taste-related metabolites we assessed 104 members of a Lactuca sativa cv. Salinas x L. serriola (accession UC96US23) mapping population. Plants were grown in three distinct environments, and untargeted NMR and HPLC were used as a rapid chemotyping method, from which 63 unique Quantitative Trait Loci (QTL) were identified. We were able to identify putative regulatory candidate genes underlying the QTL for fructose on linkage group 9, which accounted for up to 36 % of our population variation, and which was stable across all three growing environments; and for 15-p-hydroxyyphenylacetyllactucin-8-sulfate on linkage group 5 which has previously been identified for its low bitterness, while retaining anti-herbivory field effects. We also identified a candidate gene for flavonoid 3',5'- hydroxylase underlying a polyphenol QTL on linkage group 5, and two further candidate genes in sugar biosynthesis on linkage groups 2 and 5. Collectively these candidate genes and their associated markers can inform a route for plant breeders to improve the palatability and nutritional value of lettuce in their breeding programmes.

Leaf cuticular wax composition of a genetically diverse collection of lettuce (Lactuca sativa L.) cultivars evaluated under field conditions.

Cuticular waxes of plants impart tolerance to many forms of environmental stress and help shed dangerous human pathogens on edible plant parts. Although the chemical composition of waxes on a wide variety of important crops has been described, a detailed wax compositional analysis has yet to be reported for lettuce (Lactuca sativa L.), one of the most widely consumed vegetables. We present herein the leaf wax content and composition of 12 genetically diverse lettuce cultivars sampled across five time points during their vegetative growth phase in the field. Mean total leaf wax amounts across all cultivars varied little over 28 days of vegetative growth, except for a notable decrease in total waxes following a major precipitation event, presumably due to wax degradation from wind and rain. All lettuce cultivars were found to contain a unique wax composition highly enriched in 22- and 24-carbon length 1-alcohols (docosanol and tetracosanol, respectively). In our report, the dominance of these shorter chain length 1-alcohols as wax constituents represents a relatively rare phenotype in plants. The ecological significance of these dominant and relatively short 1-alcohols is still unknown. Although waxes have been a target for improvement of various crops, no such work has been reported for lettuce. This study lays the groundwork for future research that aims to integrate cuticular wax characteristics of field grown plants into the larger context of lettuce breeding and cultivar development.

Quantitative trait loci associated with tipburn, heat stress-induced physiological disorders, and maturity traits in crisphead lettuce.

Crisphead lettuce (Lactuca sativa L.) crops exhibit several economically important, physiological disorders when grown in high temperature conditions. These include tipburn, rib discoloration, premature bolting, ribbiness, and internal rib cracking. We evaluated seven physiological disorders and three agronomic traits segregating in a recombinant inbred line (RIL) population consisting of 152 F7 RILs derived from an intra-specific cross between two crisphead cultivars, L. sativa cv. Emperor x L. sativa cv. El Dorado; evaluations were carried out at each of two parental maturities in one planting and at one intermediate maturity in a second planting in each of 2 years for a total of six evaluations. A genetic map was developed using 449 polymorphic SNP markers; it comprises 807 cM in 20 linkage groups that covered 51 % of the nine lettuce chromosomes. Composite interval mapping revealed a total of 36 significant QTLs for eight out of the ten traits evaluated. Significant QTLs were distributed in 11 linkage groups on seven of the chromosomes and accounted for up to 83 % of the phenotypic variation observed. The three largest QTLs for rib discoloration, which accounted individually for 7-21 % of the variation, were clustered with stem length, two with ribbiness and one with head firmness. Three major clusters of QTLs revealed pleiotropic effects or tight linkage between tipburn incidence and severity, head type, stem length, head firmness and ribbiness. One QTL, qTPB5.2, was detected in multiple trials and described 38-70 % of the variation in tipburn incidence. qTPB5.2 is, therefore, a useful candidate gene for breeding for tipburn resistance using marker-assisted selection.

An intra-specific linkage map of lettuce (Lactuca sativa) and genetic analysis of postharvest discolouration traits.

Minimally processed salad packs often suffer from discolouration on cut leaf edges within a few days after harvest. This limits shelf life of the product and results in high wastage. Recombinant inbred lines (RILs) derived from a cross between lettuce cvs. Saladin and Iceberg were shown to be suitable for genetic analysis of postharvest discolouration traits in lettuce. An intra-specific linkage map based on this population was generated to enable genetic analysis. A total of 424 markers were assigned to 18 linkage groups covering all nine chromosomes. The linkage map has a total length of 1,040 cM with an average marker distance of 2.4 cM within the linkage groups and was anchored to the ultra-dense, transcript-based consensus map. Significant genetic variation in the postharvest traits 'pinking', 'browning' and 'overall discolouration' was detected among the RILs. Seven significant quantitative trait loci (QTL) were identified for postharvest discolouration traits providing markers linked to the QTL that can be used for marker-assisted selection. Phenotypic stability was confirmed for extreme lines possessing the corresponding QTL parental alleles and which had shown transgressive segregation. This study indicates that a desired phenotype with reduced levels of postharvest discolouration can be achieved by breeding using natural variation.

PhytoOracle: Scalable, modular phenomics data processing pipelines.

As phenomics data volume and dimensionality increase due to advancements in sensor technology, there is an urgent need to develop and implement scalable data processing pipelines. Current phenomics data processing pipelines lack modularity, extensibility, and processing distribution across sensor modalities and phenotyping platforms. To address these challenges, we developed PhytoOracle (PO), a suite of modular, scalable pipelines for processing large volumes of field phenomics RGB, thermal, PSII chlorophyll fluorescence 2D images, and 3D point clouds. PhytoOracle aims to (i) improve data processing efficiency; (ii) provide an extensible, reproducible computing framework; and (iii) enable data fusion of multi-modal phenomics data. PhytoOracle integrates open-source distributed computing frameworks for parallel processing on high-performance computing, cloud, and local computing environments. Each pipeline component is available as a standalone container, providing transferability, extensibility, and reproducibility. The PO pipeline extracts and associates individual plant traits across sensor modalities and collection time points, representing a unique multi-system approach to addressing the genotype-phenotype gap. To date, PO supports lettuce and sorghum phenotypic trait extraction, with a goal of widening the range of supported species in the future. At the maximum number of cores tested in this study (1,024 cores), PO processing times were: 235 minutes for 9,270 RGB images (140.7 GB), 235 minutes for 9,270 thermal images (5.4 GB), and 13 minutes for 39,678 PSII images (86.2 GB). These processing times represent end-to-end processing, from raw data to fully processed numerical phenotypic trait data. Repeatability values of 0.39-0.95 (bounding area), 0.81-0.95 (axis-aligned bounding volume), 0.79-0.94 (oriented bounding volume), 0.83-0.95 (plant height), and 0.81-0.95 (number of points) were observed in Field Scanalyzer data. We also show the ability of PO to process drone data with a repeatability of 0.55-0.95 (bounding area).

Development and application of a 6.5 million feature Affymetrix Genechip® for massively parallel discovery of single position polymorphisms in lettuce (Lactuca spp.).

BACKGROUND: High-resolution genetic maps are needed in many crops to help characterize the genetic diversity that determines agriculturally important traits. Hybridization to microarrays to detect single feature polymorphisms is a powerful technique for marker discovery and genotyping because of its highly parallel nature. However, microarrays designed for gene expression analysis rarely provide sufficient gene coverage for optimal detection of nucleotide polymorphisms, which limits utility in species with low rates of polymorphism such as lettuce (Lactuca sativa). RESULTS: We developed a 6.5 million feature Affymetrix GeneChip® for efficient polymorphism discovery and genotyping, as well as for analysis of gene expression in lettuce. Probes on the microarray were designed from 26,809 unigenes from cultivated lettuce and an additional 8,819 unigenes from four related species (L. serriola, L. saligna, L. virosa and L. perennis). Where possible, probes were tiled with a 2 bp stagger, alternating on each DNA strand; providing an average of 187 probes covering approximately 600 bp for each of over 35,000 unigenes; resulting in up to 13 fold redundancy in coverage per nucleotide. We developed protocols for hybridization of genomic DNA to the GeneChip® and refined custom algorithms that utilized coverage from multiple, high quality probes to detect single position polymorphisms in 2 bp sliding windows across each unigene. This allowed us to detect greater than 18,000 polymorphisms between the parental lines of our core mapping population, as well as numerous polymorphisms between cultivated lettuce and wild species in the lettuce genepool. Using marker data from our diversity panel comprised of 52 accessions from the five species listed above, we were able to separate accessions by species using both phylogenetic and principal component analyses. Additionally, we estimated the diversity between different types of cultivated lettuce and distinguished morphological types. CONCLUSION: By hybridizing genomic DNA to a custom oligonucleotide array designed for maximum gene coverage, we were able to identify polymorphisms using two approaches for pair-wise comparisons, as well as a highly parallel method that compared all 52 genotypes simultaneously.

A gene encoding an abscisic acid biosynthetic enzyme (LsNCED4) collocates with the high temperature germination locus Htg6.1 in lettuce (Lactuca sp.).

Thermoinhibition, or failure of seeds to germinate when imbibed at warm temperatures, can be a significant problem in lettuce (Lactuca sativa L.) production. The reliability of stand establishment would be improved by increasing the ability of lettuce seeds to germinate at high temperatures. Genes encoding germination- or dormancy-related proteins were mapped in a recombinant inbred line population derived from a cross between L. sativa cv. Salinas and L. serriola accession UC96US23. This revealed several candidate genes that are located in the genomic regions containing quantitative trait loci (QTLs) associated with temperature and light requirements for germination. In particular, LsNCED4, a temperature-regulated gene in the biosynthetic pathway for abscisic acid (ABA), a germination inhibitor, mapped to the center of a previously detected QTL for high temperature germination (Htg6.1) from UC96US23. Three sets of sister BC(3)S(2) near-isogenic lines (NILs) that were homozygous for the UC96US23 allele of LsNCED4 at Htg6.1 were developed by backcrossing to cv. Salinas and marker-assisted selection followed by selfing. The maximum temperature for germination of NIL seed lots with the UC96US23 allele at LsNCED4 was increased by 2-3°C when compared with sister NIL seed lots lacking the introgression. In addition, the expression of LsNCED4 was two- to threefold lower in the former NIL lines as compared to expression in the latter. Together, these data strongly implicate LsNCED4 as the candidate gene responsible for the Htg6.1 phenotype and indicate that decreased ABA biosynthesis at high imbibition temperatures is a major factor responsible for the increased germination thermotolerance of UC96US23 seeds.

The inheritance of resistance to Verticillium wilt caused by race 1 isolates of Verticillium dahliae in the lettuce cultivar La Brillante.

Verticillium wilt of lettuce caused by Verticillium dahliae can cause severe economic damage to lettuce producers. Complete resistance to race 1 isolates is available in Lactuca sativa cultivar (cv.) La Brillante and understanding the genetic basis of this resistance will aid development of new resistant cultivars. F(1) and F(2) families from crosses between La Brillante and three iceberg cultivars as well as a recombinant inbred line population derived from L. sativa cv. Salinas 88 × La Brillante were evaluated for disease incidence and disease severity in replicated greenhouse and field experiments. One hundred and six molecular markers were used to generate a genetic map from Salinas 88 × La Brillante and for detection of quantitative trait loci. Segregation was consistent with a single dominant gene of major effect which we are naming Verticillium resistance 1 (Vr1). The gene described large portions of the phenotypic variance (R(2) = 0.49-0.68) and was mapped to linkage group 9 coincident with an expressed sequence tag marker (QGD8I16.yg.ab1) that has sequence similarity with the Ve gene that confers resistance to V. dahliae race 1 in tomato. The simple inheritance of resistance indicates that breeding procedures designed for single genes will be applicable for developing resistant cultivars. QGD8I16.yg.ab1 is a good candidate for functional analysis and development of markers suitable for marker-assisted selection.

A Composite Analysis of Flowering Time Regulation in Lettuce.

Plants undergo profound physiological changes when transitioning from vegetative to reproductive growth. These changes affect crop production, as in the case of leafy vegetables. Lettuce is one of the most valuable leafy vegetable crops in the world. Past genetic studies have identified multiple quantitative trait loci (QTLs) that affect the timing of the floral transition in lettuce. Extensive functional molecular studies in the model organism Arabidopsis provide the opportunity to transfer knowledge to lettuce to explore the mechanisms through which genetic variations translate into changes in flowering time. In this review, we integrated results from past genetic and molecular studies for flowering time in lettuce with orthology and functional inference from Arabidopsis. This summarizes the basis for all known genetic variation underlying the phenotypic diversity of flowering time in lettuce and how the genetics of flowering time in lettuce projects onto the established pathways controlling flowering time in plants. This comprehensive overview reveals patterns across experiments as well as areas in need of further study. Our review also represents a resource for developing cultivars with delayed flowering time.

High-resolution genetic dissection of the major QTL for tipburn resistance in lettuce, Lactuca sativa.

Tipburn is an important physiological disorder of lettuce, Lactuca sativa L., related to calcium deficiency that can result in leaf necrosis and unmarketable crops. The major quantitative trait locus (QTL), qTPB5.2, can account for up to 70% of the phenotypic variance for tipburn incidence in the field. This QTL was genetically dissected to identify candidate genes for tipburn by creating lines with recombination events within the QTL and assessing their resistance to tipburn. By comparing lines with contrasting haplotypes, the genetic region was narrowed down to ∼877 Kb that was associated with a reduction of tipburn by ∼60%. Analysis of the lettuce reference genome sequence revealed 12 genes in this region, one of which is a calcium transporter with a single nucleotide polymorphism in an exon between haplotypes with contrasting phenotypes. RNA-seq analysis of recombinants revealed two genes that were differentially expressed between contrasting haplotypes consistent with the tipburn phenotype. One encodes a Teosinte branched1/Cycloidea/Proliferating Cell factor transcription factor; however, differential expression of the calcium transporter was detected. The phenotypic data indicated that there is a second region outside of the ∼877 Kb region but within the QTL, at which a haplotype from the susceptible parent decreased tipburn by 10-20%. A recombinant line was identified with beneficial haplotypes in each region from both parents that showed greater tipburn resistance than the resistant parent; this line could be used as the foundation for breeding cultivars with more resistance than is currently available.