Effect of strain rates on the mechanical response of whole muscle bundle.

Muscle injuries frequently happen during sports activities and exercise, which could have serious consequences if not diagnosed and treated promptly. This research aims to investigate the quasi-static and dynamic responses of over 30 fresh frog semitendinosus muscles utilizing Split Hopkinson Pressure Bars (SHPB) and a material testing system under strain rates between 0.001 ~ 200 s-1. To accommodate the special shape of muscle-tendon-bone samples, PLA clampers were produced by the 3D printer to properly hold and prevent slipping during the testing process. The mechanical characteristics of the whole muscle bundle, including Young's modulus and stress-strain curve, are illustrated at various strain rates. The findings showed that the muscle properties were sensitive to strain rate when under passive deformation. Both maximum stress and Young's modulus increased with the rise of strain rate, and modulus at 200 s-1 can be as high as 10 times compared with quasi-static conditions.

Double Notched Long-Period Fiber Grating Characterization for CO2 Gas Sensing Applications †.

In this study, we applied a double-sided inductively coupled plasma (ICP) process to nanostructure long-period fiber grating (LPFG) in order to fabricate a double-notched LPFG (DNLPFG) sensor with a double-sided surface corrugated periodic grating. Using the sol-gel method, we also added thymol blue and ZnO to form a gas sensing layer, thus producing a DNLPFG CO2 gas sensor. The resulting sensor is the first double-sided etching sensor used to measure CO2. The experimental results showed that as the CO2 concentration increased, the transmission loss increased, and that the smaller the fiber diameter, the greater the sensitivity and the greater the change in transmission loss. When the diameter of the fiber was 32 µm (and the period was 570 µm) and the perfusion rate of CO2 gas was 15%, the maximum loss variation of up to 3.881 dB was achieved, while the sensitivity was 0.2146 dB/% and the linearity was 0.992. These results demonstrate that the DNLPG CO2 gas sensor is highly sensitive.

Perfectly notched long-period fiber grating filter based on ICP dry etching technique.

This study presents a new process using inductively a coupled plasma dry etching method to manufacture a long-period fiber grating filter with exact period, vertical sidewalls, and smooth etched surfaces, and the filter is thus named a perfectly notched long-period fiber grating (NLPFG). This process can dramatically reduce production time, and thereby provide higher volume production. The fabricated NLPFG has periods of 640 µm, resonant-attenuation wavelengths of 1518 nm, and maximum resonance-attenuation of 21.79 dB. A force induced loss-tunable calibration of the NLPFG filter was implemented, and a monotonically increasing quadratic fitting was observed. The results demonstrated that the proposed NLPFG has a much better period precision compared to corrugated LPFG, and it has great potential for a loss-tunable filter and force transducer applications.

Dynamic tensile properties of porcine knee ligament.

BACKGROUND: The knee plays an essential role in movement. There are four major ligaments in the knee which all have crucial functionalities for human activities. The anterior cruciate ligament (ACL) is the most commonly injured ligament in the knee, especially in athletes. OBJECTIVE: The aim of this study was to investigate the dynamic tensile response of the porcine ACL at strain rates from 800 to 1500 s-1 for simulations of acute injury from sudden impact or collision. METHODS: Split Hopkinson Tension Bar (SHTB) was utilized to create a dynamic tensile wave on the ACL. Stress-strain curves of strain rates between 800 s-1 to 1500 s-1 were recorded. RESULTS: The results demonstrated that the elastic modulus of the porcine ACL at higher strain rates was six to eight times higher than that of porcine and human specimens at quasi-static strain rate. However, the failure stress was quite similar while the strain was much smaller than that at the lower strain rate. CONCLUSIONS: ACL is highly strain rate sensitive and easier to break with lower failure strain when the strain rates increased to more than 1000 s-1. The stress-strain curves indicated that the sketching crimps at the slack region did not happen but switched to the sliding process of collagen fibers and was accompanied by some ruptures, which can develop into tears when strain and stress were large enough. On the other hand, the viscoelastic properties of the ligament, depending on the proteoglycan matrix and the cross-link, showed a limited value in the studied strain rate range.

Investigation of distinct welding parameters on mechanical and corrosion properties of dissimilar welded joints between stainless steel and low carbon steel.

The tensile strength and corrosion behavior of dissimilar welded joints are currently a subject of concern. In this work, gas metal arc welding (GMAW) and distinct welding parameters (welding current, arc voltage, and welding speed) were used to join 304 stainless steel (SUS304) and SS400 low carbon steel, and the ultimate tensile strength (UTS) of the dissimilar welded joints was investigated. A corrosion test was conducted by immersion in 3.5 wt.% sodium chloride (NaCl) solution for 7, 14, and 21 days. Based on tensile strength and Tafel testing, the welding parameters "Item 4" (welding current: 170 A, arc voltage: 20 V, welding speed: 40 cm/min) yielded good mechanical strength and low corrosion characteristics. The microstructure characterization showed that the area around the welded joints and SUS304 had more granular corrosion and corrosion tubercles with increasing immersion time. The chromium content gradually decreased. When exposed to the chloride environment, these welded joints easily underwent corrosion due to the loss of passivity. However, high-velocity oxygen-fuel (HVOF) spray used on the welded joints reduced the corrosion current density. Compared with the non-thermal spray sample (corrosion current density:7.49e - 05 A/cm2) while the corrosion current density (7.89e - 10 A/cm2) is five orders of magnitude lower. This spray effectively slowed down the corrosion rate of the welded joints and gave the structural objects good protection in the sodium chloride solution.

Sandwiched long-period fiber grating filter based on periodic SU8-thick photoresist technique.

A loss-tunable sandwiched long-period fiber grating (SLPFG) filter is proposed in this Letter. This SLPFG utilized thick SU8 photoresist layers to induce refractive index modulations, and ultrahigh period precision was hence achieved. The external force required to tune this SLPFG filter is about 0.3942 N with the deepest loss attenuation 31.29 dB at 1534 nm wavelength. This process not only improves the overall performance of traditional long period fiber grating but also cuts down the facility cost by 50%. The proposed SLPFG has great potential for low-cost and compact force transducer applications.

The Effect of Heat Treatment on the Sensitized Corrosion of the 5383-H116 Al-Mg Alloy.

In this study, the effects of heat treatment and sensitized corrosion on the 5383-H116 Al-Mg alloy were investigated for temperatures ranging from 100 to 450 °C. The results show that the heat treatment temperature is the main factor that causes changes to the microstructure and mechanical strength of the 5383-H116 Al-Mg alloy, inducing ß-phase (Al3Mg2) precipitation in the form of a continuous layer along the grain boundaries. Intergranular corrosion was caused by the ß-phase of the grain boundary precipitation, and the corrosion susceptibility of the recrystallized structure was significantly higher than the corrosion susceptibility of the recovered structure. According to the conductivity values detected, ß-phase precipitation can enhance the 5383-H116 Al-Mg alloy conductivity, with the response due to structural dislocation density being higher than that due to the recrystallized structure. As such, the ß-phase precipitation after sensitization is more significant than the ß-phase precipitation prior to the sensitization, such that after sensitization, the conductivity rises to a significantly higher level than that exhibited by the recrystallization structure.

Fiber-Optic Thermal Sensor for TiN Film Crack Monitoring.

The study focuses on the thermal and temperature sensitivity behavior of an optical fiber sensor device. In this article, a titanium nitride (TiN)-coated fiber Bragg grating (FBG) sensor fabricated using an ion beam sputtering system was investigated. The reflection spectra of the FBG sensor were tested using R-soft optical software to simulate the refractive index sensitivity. In these experiments, the temperature sensitivity of the TiN FBG was measured at temperatures ranging from 100 to 500 °C using an optical spectrum analyzer (OSA). The results showed that the temperature sensitivity of the proposed TiN FBG sensor reached 12.8 pm/°C for the temperature range of 100 to 300 °C and 20.8 pm/°C for the temperature range of 300 to 500 °C. Additionally, we found that the produced oxidation at temperatures of 400-500 °C caused a crack, with the crack becoming more and more obvious at higher and higher temperatures.

High strain-rate response of injectable PAA hydrogel.

Hydrogel materials have been widely considered as potential soft tissue replacements because of their high permeability, hydrophilicity, and biocompatibility, as well as their low coefficient of friction. Injectable (thermo-responsive) hydrogels can provide support and cushioning at irregularly shaped disease sites, and are thus suitable for use in treating osteoarthritis or degenerative disc disease. However, while some injectable hydrogels have been proven to sustain human body weight during daily activities, their mechanical properties under harsh dynamic conditions have not been well documented. A specified injectable polyacrylic acid (PAA) hydrogel was prepared for this study. To simulate sudden impacts or unexpected shocks to the PAA hydrogel, the split Hopkinson pressure bar technique was utilized. The dynamic responses of various hydrogels at confined high strain rates (100-2590 s(-1)) were presented. Hydrogel specimens with 3.37, 6.75, and 13.5% acrylic acid (AAc) concentrations were tested in the following three different material conditions: raw, phosphate-buffered saline (PBS) swollen, and PBS swollen with elevated temperature (37 °C). The dynamic bulk moduli of the hydrogels varied from 1.55 to 47.8 MPa depending on the given hydrogel's AAc concentration and swollen condition.