Inverted pin beams for robust long-range propagation through atmospheric turbulence.

We introduce a new, to the best of our knowledge, class of optical beams, which feature a spatial profile akin to an "inverted pin." In particular, we asymptotically find that close to the axis, the transverse amplitude profile of such beams takes the form of a Bessel function with a width that gradually increases during propagation. We examine numerically the behavior of such inverted pin beams in turbulent environments as measured via the scintillation index and show that they outperform Gaussian beams (collimated and focused) as well as Bessel beams and regular pin beams, which are all optimized, especially in the moderate and strong fluctuation regimes.

Terahertz emission from curved plasma filaments induced by two-color 2D Airy wave packets.

We experimentally demonstrate that 2D Airy wave packets can produce intense curved two-color filaments that emit terahertz (THz) radiation with unique characteristics. Due to the curvature of the plasma channel, THz waves, emitted from different longitudinal regions of the plasma, propagate in different directions resulting in non-concentric THz cones in the far-field. These cones have different cone angles and polarization which we attribute to the way the two-color 2D Airy driving fields are produced in the nonlinear crystal and then propagate to form the curved plasma filament.

Taming femtosecond laser filamentation and supercontinuum generation in liquids using neural networks.

We report the spectral shaping of supercontinuum generation in liquids by employing properly engineered Bessel beams coupled with artificial neural networks. We demonstrate that given a custom spectrum, neural networks are capable of outputting the experimental parameters needed to generate it experimentally.

Altering the Surface Properties of Metal Alloys Utilizing Facile and Ecological Methods.

The development of a superhydrophobic and, even, water-repellent metal alloy surface is reported utilizing a simple, fast, and economical way that requires minimum demands on the necessary equipment and/or methods used. The procedure involves an initial irradiation of the metallic specimen using a femtosecond laser, which results in a randomly roughened surface, that is subsequently followed by placing the item in an environment under moderate vacuum (pressure 10-2 mbar) and/or under low-temperature heating (at temperatures below 120 °C). The effects of both temperature and low pressure on the surface properties (water contact angle and contact angle hysteresis) are investigated and surfaces with similar superhydrophobicity are obtained in both cases; however, a significant difference concerning their water-repellent ability is obtained. The surfaces that remained under vacuum were water-repellent, exhibiting very high values of contact angle with a very low contact angle hysteresis, whereas the surfaces, which underwent thermal processing, exhibited superhydrophobicity with high water adhesion, where water droplets did not roll off even after a significant inclination of the surface. The kinetics of the development of superhydrophobic behavior was investigated as well. The findings were understood when the surface roughness characteristics were considered together with the chemical composition of the surface.

Passive radiative cooling and other photonic approaches for the temperature control of photovoltaics: a comparative study for crystalline silicon-based architectures.

The radiative cooling of objects during daytime under direct sunlight has recently been shown to be significantly enhanced by utilizing nanophotonic coatings. Multilayer thin film stacks, 2D photonic crystals, etc. as coating structures improved the thermal emission rate of a device in the infrared atmospheric transparency window reducing considerably devices' temperature. Due to the increased heating in photovoltaic (PV) devices - that has significant adverse consequences on both their efficiency and life-time - and inspired by the recent advances in daytime radiative cooling, we developed a coupled thermal-electrical modeling to examine the physical mechanisms on how a radiative cooler affects the overall efficiency of commercial photovoltaic modules and how the radiative cooling impact is compared with the impact of other photonic strategies for reducing heat generation within PVs, such as ultraviolet and sub-bandgap reflection. Employing our modeling, which takes into account all the major intrinsic processes affected by the temperature variation in a PV device, we additionally identified the validity regimes of the currently existing PV-cooling models which treat the PV coolers as simple thermal emitters. Finally, we assessed some realistic photonic coolers from the literature, compatible with photovoltaics, to implement the radiative cooling requirements and the requirements related to the reduction of heat generation, and demonstrated their associated impact on the temperature reduction and PV efficiency. Consistent with previous works, we showed that combining radiative cooling with sub-bandgap reflection proves to be more promising for increasing PVs' efficiency. Providing the physical mechanisms and requirements for reducing PV operating temperature, our study provides guidelines for utilizing suitable photonic structures for enhancing the efficiency and the lifetime of PV devices.

Impact of gas dynamics on laser filamentation THz sources at high repetition rates.

We experimentally demonstrate that the terahertz (THz) emission from two-color laser filaments in gases is strongly affected by the pulse repetition rate of the driving laser. We show that at repetition rates above 100 Hz, propagation of every next laser pulse in the pulse train is altered by gas density depressions produced by the preceding laser pulses. As a result, plasma channels at higher repetition rates become shorter, leading to less efficient THz generation. In particular, we observe a 50% decrease in the emitted THz energy when the repetition rate increases from 6 Hz to 6 kHz.

Influence of air humidity on 248-nm ultraviolet laser pulse filamentation.

At first glance, the amount of water molecules naturally contained in humid air is negligibly small to affect filamentation of ultrashort laser pulses. However, here we show, both experimentally and numerically, that for ultraviolet laser pulses with 248 nm wavelength this is not true. We demonstrate that with increase of air humidity the plasma channels generated by the ultraviolet laser pulses in air become longer and wider, while the corresponding electron density in humid air can be up to one order of magnitude higher compared to dry air.

Optimal wavelength for two-color filamentation-induced terahertz sources.

We theoretically study the generation of terahertz (THz) radiation by two-color filamentation of ultrashort laser pulses with different wavelengths. We consider wavelengths in the range from 0.6 to 10.6 µm, thus covering the whole range of existing and future powerful laser sources in the near, mid and far-infrared. We show how different parameters of two-color filaments and generated THz pulses depend on the laser wavelength. We demonstrate that there is an optimal laser wavelength for two-color filamentation that provides the highest THz conversion efficiency and results in generation of extremely intense single cycle THz fields.

Ring-Airy beams at the wavelength limit.

We demonstrate that paraxial ring-Airy beams can approach the wavelength limit, while observing a counterintuitive, strong enhancement of their focal peak intensity. Using numerical simulations, we show that this behavior is a result of the coherent constructive action of paraxial and nonparaxial energy flow. A simple theoretical model enables us to predict the parameter range over which this is possible.

Phase Memory Preserving Harmonics from Abruptly Autofocusing Beams.

We demonstrate both theoretically and experimentally that the harmonics from abruptly autofocusing ring-Airy beams present a surprising property: They preserve the phase distribution of the fundamental beam. Consequently, this "phase memory" imparts to the harmonics the abrupt autofocusing behavior, while, under certain conditions, their foci coincide in space with the one of the fundamental. Experiments agree well with our theoretical estimates and detailed numerical calculations. Our findings open the way for the use of such beams and their harmonics in strong field science.

Janus waves.

We show the existence of a family of waves that share a common interesting property affecting the way these waves propagate and focus. The waves are a superposition of twin waves, which are conjugate to each other under inversion of the propagation direction. In analogy to holography, these twin "real" and "virtual" waves are related, respectively, to the converging and diverging parts of the beam and can be clearly visualized in real space at two distinct foci under the action of a focusing lens. Analytic formulas for the intensity distribution after focusing are derived, while numerical and experimental demonstrations are given for some of the most interesting members of this family, the accelerating Airy and ring-Airy beams.

Fano resonances in THz metamaterials composed of continuous metallic wires and split ring resonators.

We demonstrate theoretically and experimentally that Fano resonances can be obtained in terahertz metamaterials that are composed of periodic continuous metallic wires dressed with periodic split ring resonators. An asymmetric Fano lineshape has been found in a narrow frequency range of the transmission curve. By using a transmission line combined with lumped element model, we are able to not only fit the transmission spectra of Fano resonance which is attributed to the coupling and interference between the transmission continuum of continuous metallic wires and the bright resonant mode of split ring resonators, but also reveal the capacitance change of the split ring resonators induced frequency shift of the Fano resonance. Therefore, the proposed theoretical model shows more capabilities than conventional coupled oscillator model in the design of Fano structures. The effective parameters of group refractive index of the Fano structure are retrieved, and a large group index more than 800 is obtained at the Fano resonance, which could be used for slow light devices.

Infrared-reflective ultrathin-metal-film-based transparent electrode with ultralow optical loss for high efficiency in solar cells.

In this work we study in-depth the antireflection and filtering properties of ultrathin-metal-film-based transparent electrodes (MTEs) integrated in thin-film solar cells. Based on numerical optimization of the MTE design and the experimental characterization of thin-film perovskite solar cell (PSC) samples, we show that reflection in the visible spectrum can be strongly suppressed, in contrast to common belief (due to the compact metal layer). The optical loss of the optimized electrode (~ 2.9%), composed of a low-resistivity metal and an insulator, is significantly lower than that of a conventional transparent conductive oxide (TCO ~ 6.3%), thanks to the very high transmission of visible light within the cell (> 91%) and low thickness (< 70 nm), whereas the reflection of infrared light (~ 70%) improves by > 370%. To assess the application potentials, integrated current density > 25 mA/cm2, power conversion efficiency > 20%, combined with vastly reduced device heat load by 177.1 W/m2 was achieved in state-of-the-art PSCs. Our study aims to set the basis for a novel interpretation of composite electrodes/structures, such as TCO-metal-TCO, dielectric-metal-dielectric or insulator-metal-insulator, and hyperbolic metamaterials, in high-efficiency optoelectronic devices, such as solar cells, semi-transparent, and concentrated systems, and other electro-optical components including smart windows, light-emitting diodes, and displays.

Development of stochastically reconstructed 3D porous media micromodels using additive manufacturing: numerical and experimental validation.

We propose an integrated methodology for the design and fabrication of 3D micromodels that are suitable for the pore-scale study of transport processes in macroporous materials. The micromodels, that bear the pore-scale characteristics of sandstone, such as porosity, mean pore size, etc, are designed following a stochastic reconstruction algorithm that allows for fine-tuning the porosity and the correlation length of the spatial distribution of the solid material. We then construct a series of 3D micromodels at very fine resolution (i.e. 16 µ m) using a state-of-the-art 3D printing infrastructure, specifically a ProJet MJP3600 3D printer, that utilizes the Material Jetting technology. Within the technical constraints of the 3D printer resolution, the fabricated micromodels represent scaled-up replicas of natural sandstones, that are suitable for the study of the scaling between the permeability, the porosity and the mean pore size. The REV- and pore-scale characteristics of the resulting physical micromodels are recovered using a combination of X-ray micro-CT and microfluidic studies. The experimental results are then compared with single-phase flow simulations at pore-scale and geostatistic models in order to determine the effects of the design parameters on the intrinsic permeability and the spatial correlation of the velocity profile. Our numerical and experimental measurements reveal an excellent match between the properties of the designed and fabricated 3D domains, thus demonstrating the robustness of the proposed methodology for the construction of 3D micromodels with fine-tuned and well-controlled pore-scale characteristics. Furthermore, a pore-scale numerical study over a wider range of 3D digital domain realizations reveals a very good match of the measured permeabilities with the predictions of the Kozeny-Carman formulation based on a single control parameter, k 0 , that is found to have a practically constant value for porosities ϕ ≥ 0.2 . This, in turn, enables us to customize the sample size to meet REV constraints, including enlarging pore morphology while considering the Reynolds number. It is also found that at lower porosities there is a significant increase in the fraction of the non-percolating pores, thus leading to different k 0 , as the porosity approaches a numerically determined critical porosity value, ϕ c , where the domain is no longer percolating.

Monitoring adsorption and sedimentation using evanescent-wave cavity ringdown ellipsometry.

We monitor the adsorption of Rhodamine 800, and the sedimentation of a polytetrafluoroethylene (PTFE) suspension at the surface of a fused-silica prism, by measuring both the absorption and s-p phase shift Δ of a 740 nm probe laser beam, using evanescent-wave cavity ringdown ellipsometry (EW-CRDE). The two systems demonstrate the complementary strengths of EW-CRDE, as the progress of adsorption of the Rhodamine 800 dye can only be observed sensitively via the measurement of absorption, whereas the progress of sedimentation of PTFE can only be observed sensitively via the measurement of Δ. We show that EW-CRDE provides a sensitive method for the measurement of Δ and demonstrates precision in Δ of about 10(-4) deg.

Faithful communication Hamiltonian in photonic lattices.

Faithful communication is a necessary precondition for large scale all-optical networking and quantum information processing. Related theoretical investigations in different areas of physics have led to various proposals in which finite discrete lattices are used as channels for short-distance communication tasks. Here, in the framework of femtosecond-laser-written waveguide arrays, we present the first experimental realization of such a channel with judiciously engineered couplings.

Linear and nonlinear waves in surface and wedge index potentials.

We study optical beams that are supported at the surface of a medium with a linear index potential and by a piecewise linear wedge-type potential. In the linear limit the modes are described by Airy functions. In the nonlinear regime we find families of solutions that bifurcate from the linear modes and study their stability for both self-focusing and self-defocusing Kerr nonlinearity. The total power of such nonlinear waves is finite without the need for apodization.

Nonlinear birefringence due to non-resonant, higher-order Kerr effect in isotropic media.

The recent interpretation of experiments on the nonlinear non-resonant birefringence induced in a weak probe beam by a high intensity pump beam in air and its constituents has stimulated interest in the non-resonant birefringence due to higher-order Kerr nonlinearities. Here a simple formalism is invoked to determine the non-resonant birefringence for higher-order Kerr coefficients. Some general relations between nonlinear coefficients with arbitrary frequency inputs are also derived for isotropic media. It is shown that the previous linear extrapolations for higher-order birefringence (based on literature values of n2 and n4) are not strictly valid, although the errors introduced in the values of the reported higher- order Kerr coefficients are a few percent.

Off-resonance and non-resonant dispersion of Kerr nonlinearity for symmetric molecules [Invited].

The exact formula is derived from the "sum over states" (SOS) quantum mechanical model for the frequency dispersion of the nonlinear refractive index coefficient n2 for centrosymmetric molecules in the off-resonance and non-resonant regimes. This expression is characterized by interference between terms from two-photon transitions from the ground state to the even-symmetry excited states and one-photon transitions between the ground state and odd-symmetry excited states. When contributions from the two-photon terms exceed those from the one-photon terms, the non-resonant intensity-dependent refractive index n2>0, and vice versa. Examples of the frequency dispersion for the three-level SOS model are given. Comparison is made with other existing theories.

Observation of abruptly autofocusing waves.

We report on the experimental observation of abruptly autofocusing waves. This interesting family of wave packets has been realized by using a radially symmetric Airy intensity distribution. As demonstrated in our experiments, these waves can exhibit unusual features, such as the ability to autofocus by following a parabolic trajectory toward their focus.