Tomographic reconstruction of oxygen orbitals in lithium-rich battery materials.

The electrification of heavy-duty transport and aviation will require new strategies to increase the energy density of electrode materials1,2. The use of anionic redox represents one possible approach to meeting this ambitious target. However, questions remain regarding the validity of the O2-/O- oxygen redox paradigm, and alternative explanations for the origin of the anionic capacity have been proposed3, because the electronic orbitals associated with redox reactions cannot be measured by standard experiments. Here, using high-energy X-ray Compton measurements together with first-principles modelling, we show how the electronic orbital that lies at the heart of the reversible and stable anionic redox activity can be imaged and visualized, and its character and symmetry determined. We find that differential changes in the Compton profile with lithium-ion concentration are sensitive to the phase of the electronic wave function, and carry signatures of electrostatic and covalent bonding effects4. Our study not only provides a picture of the workings of a lithium-rich battery at the atomic scale, but also suggests pathways to improving existing battery materials and designing new ones.

Double-Layered Perovskite Oxyfluoride Cathodes with High Capacity Involving O-O Bond Formation for Fluoride-Ion Batteries.

Developing electrochemical high-energy storage systems is of crucial importance toward a green and sustainable energy supply. A promising candidate is fluoride-ion batteries (FIBs), which can deliver a much higher volumetric energy density than lithium-ion batteries. However, typical metal fluoride cathodes with conversion-type reactions cause a low-rate capability. Recently, layered perovskite oxides and oxyfluorides, such as LaSrMnO4 and Sr3Fe2O5F2, have been reported to exhibit relatively high rate performance and cycle stability compared to typical metal fluoride cathodes with conversion-type reactions, but their discharge capacities (∼118 mA h/g) are lower than those of typical cathodes used in lithium-ion batteries. Here, we show that double-layered perovskite oxyfluoride La1.2Sr1.8Mn2O7-δF2 exhibits (de) intercalation of two fluoride ions to rock-salt slabs and further (de) intercalation of excess fluoride ions to the perovskite layer, leading to a reversible capacity of 200 mA h/g. The additional fluoride-ion intercalation leads to the formation of O-O bond in the structure for charge compensation (i.e., anion redox). These results highlight the layered perovskite oxyfluorides as a new class of active materials for the construction of high-performance FIBs.

Stacking Order Induced Anion Redox Regulation for Layer-Structured Na0.75 Li0.2 Mn0.7 Cu0.1 O2 Cathode Materials.

Stacking order plays a key role in defining the electrochemical behavior and structural stability of layer-structured cathode materials. However, the detailed effects of stacking order on anionic redox in layer-structured cathode materials have not been investigated specifically and are still unrevealed. Herein, two layered cathodes with the same chemical formula but different stacking orders: P2-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P2-LMC) and P3-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P3-LMC) are compared. It is found that P3 stacking order is beneficial to improve the oxygen redox reversibility compared with P2 stacking order. By using synchrotron hard and soft X-ray absorption spectroscopies, three redox couples of Cu2+ /Cu3+ , Mn3.5+ /Mn4+ , and O2- /O- are revealed to contribute charge compensation in P3 structure simultaneously, and two redox couples of Cu2+ /Cu3+ and O2- /O- are more reversible than those in P2-LMC due to the higher electronic densities in Cu 3d and O 2p orbitals in P3-LMC. In situ X-ray diffraction reveals that P3-LMC exhibits higher structural reversibility during charge and discharge than P2-LMC, even at 5C rate. As a result, P3-LMC delivers a high reversible capacity of 190.3 mAh g-1 and capacity retention of 125.7 mAh g-1 over 100 cycles. These findings provide new insight into oxygen-redox-involved layered cathode materials for SIBs.

Adaptive Cation Pillar Effects Achieving High Capacity in Li-Rich Layered Oxide, Li2 MnO3 -LiMeO2 (Me = Ni, Co, Mn).

Intensive research is underway to further enhance the performance of lithium-ion batteries (LIBs). To increase the capacity of positive electrode materials, Li-rich layered oxides (LLO) are attracting attention but have not yet been put to practical use. The structural mechanisms through which LLO materials exhibit higher capacity than conventional materials remain unclear because their disordered phases make it difficult to obtain structural information by conventional analysis. The X-ray total scattering analysis reveals a disordered structure consisting of metal ions in octahedral and tetrahedral sites of Li layers as a result of cation mixing after the extraction of Li ions. Metal ions in octahedral sites act as rigid pillars. The metal ions move to the tetrahedral site of the Li layer, which functions as a Li-layer pillar during Li extraction, and returns to the metal site during Li insertion, facilitating Li diffusion as an adaptive pillar. Adaptive pillars are the specific structural features that differ from those of the conventional layered materials, and their effects are responsible for the high capacity of LLO materials. An essential understanding of the pillar effects will contribute to design guidelines for intercalation-type positive electrodes for next-generation LIBs.

Improvement of Visible-Light H2 Evolution Activity of Pb2 Ti2 O5.4 F1.2 Photocatalyst by Coloading of Rh and Pd Cocatalysts.

Pb2 Ti2 O5.4 F1.2 modified with various metal cocatalysts was studied as a photocatalyst for visible-light H2 evolution. Although unmodified Pb2 Ti2 O5.4 F1.2 showed negligible activity, modification of its surface with Rh led to the best observed promotional effect among the Pb2 Ti2 O5.4 F1.2 samples modified with a single metal cocatalyst. The H2 evolution activity was further enhanced by coloading with Pd; the Rh-Pd/Pb2 Ti2 O5.4 F1.2 photocatalyst showed 3.2 times greater activity than the previously reported Pt/Pb2 Ti2 O5.4 F1.2 . X-ray absorption fine-structure spectroscopy, photoelectrochemical, and transient absorption spectroscopy measurements indicated that the coloaded Rh and Pd species, which were partially alloyed on the Pb2 Ti2 O5.4 F1.2 surface, improved the electron-capturing ability, thereby explaining the high activity of the coloaded Rh-Pd/Pb2 Ti2 O5.4 F1.2 catalyst toward H2 evolution.

Single-shot laser-scattering technique refined for the real-time monitoring and sizing of individual nanoparticles and nanobubbles in bulk water.

Understanding the growth dynamics and transport mechanism of nanoparticles/nanobubbles in a solution is an important issue in nanoscience and nanotechnology. Using a standard CMOS camera and a nanosecond laser at 532 nm, we demonstrate the far-field detection of polystyrene nanoparticles in bulk water. Conveniently, the sizes of individual nanoparticles are found to be reliably estimated from the brightness of scattering signals under the single laser pulses. Since the scattering efficiency of polystyrene nanoparticles is similar to that of nanobubbles, our results imply that the detection of nanobubbles in bulk solution is also possible.

Morphology Changes in Perfluorosulfonated Ionomer from Thickness and Thermal Treatment Conditions.

The morphological changes of Nafion thin films with thicknesses from 10 to 200 nm on Pt substrate with various annealing histories (unannealed to 240 °C) were systematically investigated using grazing incidence small-angle X-ray scattering (GISAXS) and grazing incidence wide-angle X-ray scattering (GIWAXS). The results revealed that the hydrophilic ionic domain and hydrophobic backbone in Nafion thin films changed significantly when the annealing treatment exceeded the cluster transition temperature, which decreased proton conductivity, due to the constrained hydrophilic/hydrophobic phase separation, and increased the crystalline-rich domain. This research contributed to the understanding of ionomer thermal stability in the catalyst layer, which is subjected to thermal annealing during the hot-pressing process.

Electrochemical phase transformation accompanied with Mg extraction and insertion in a spinel MgMn2O4 cathode material.

One of the key challenges when developing magnesium rechargeable batteries (MRB) is to develop Mg-intercalation cathodes exhibiting higher redox potentials with larger specific capacities. Although Mg-transition-metal spinel oxides have been shown to be excellent candidates as MRB cathode materials by utilizing the valence change from trivalent to divalent of transition metals starting from Mg insertion, there is no clear evidence to date that Mg can be indeed extracted from the initial spinel hosts by utilizing the change from trivalent to quadrivalent. In this work, we clearly present various experimental evidences of the electrochemical extraction of Mg from spinel MgMn2O4. The present electrochemical charge, i.e., extraction treatment of Mg, was performed in an ionic liquid at 150 °C to ensure Mg hopping in the spinel host. Our analyses show that Mg can be extracted from Mg1-xMn2O4 up to x = 0.4 and, afterwards, successively be inserted into the Mg-extracted (demagnesiated) host via a two-phase reaction between tetragonal and cubic spinels. Finally, we also discuss the difference in electrochemical features between LiMn2O4 and MgMn2O4.

Mechanistic Insight on the Formation of GaN:ZnO Solid Solution from Zn-Ga Layered Double Hydroxide Using Urea as the Nitriding Agent.

A solid solution of GaN and ZnO (GaN:ZnO) is promising as a photocatalyst for visible-light-driven overall water splitting to produce H2. However, several obstacles still exist in the conventional preparation procedure of GaN:ZnO. For example, the atomic distributions of Zn and Ga are nonuniform in GaN:ZnO when a mixture of the metal oxides, i.e. Ga2O3 and ZnO, is used as a precursor. In addition, GaN:ZnO is generally prepared under a harmful NH3 flow for long durations at high temperatures. Here, a facile synthesis of GaN:ZnO with homogeneous atomic composition via a simple and safe procedure is reported. A layered double hydroxide (LDH) containing Zn2+ and Ga3+ was used to increase the uniformity of the atomic distributions of Zn and Ga in GaN:ZnO. We employed urea as a nitriding agent instead of gaseous NH3 to increase the safety of the reaction. Through the optimization of reaction conditions such as heat treatment temperature and content of urea, single-phase GaN:ZnO was successfully obtained. In addition, the nitridation mechanism using urea was investigated in detail. NH3 released from the thermal decomposition of urea did not directly nitride the LDH precursor. X-ray absorption and infrared  spectroscopies revealed that Zn(CN2)-like intermediate species were generated at the middle temperature range and Ga-N bonds formed at high temperature along with dissociation of CO and CO2.

Undoped Layered Perovskite Oxynitride Li2 LaTa2 O6 N for Photocatalytic CO2 Reduction with Visible Light.

Oxynitrides are promising visible-light-responsive photocatalysts, but their structures are almost confined with three-dimensional (3D) structures such as perovskites. A phase-pure Li2 LaTa2 O6 N with a layered perovskite structure was successfully prepared by thermal ammonolysis of a lithium-rich oxide precursor. Li2 LaTa2 O6 N exhibited high crystallinity and visible-light absorption up to 500 nm. As opposed to well-known 3D oxynitride perovskites, Li2 LaTa2 O6 N supported by a binuclear RuII complex was capable of stably and selectively converting CO2 into formate under visible light (λ>400 nm). Transient absorption spectroscopy indicated that, as compared to 3D oxynitrides, Li2 LaTa2 O6 N possesses a lower density of mid-gap states that work as recombination centers of photogenerated electron/hole pairs, but a higher density of reactive electrons, which is responsible for the higher photocatalytic performance of this layered oxynitride.