Understanding of Crucial Factors for Improving the Energy Density of Lithium-Sulfur Pouch Cells.

Rechargeable lithium-sulfur (Li-S) batteries are the most promising next-generation energy storage system owing to their high energy density and low cost. Despite the increasing number of publications on the Li-S technology, the number of studies on real prototype cells is rather low. Furthermore, novel concepts developed using small lab cells cannot simply be transferred to high-energy cell prototypes due to the fundamental differences. The electrolyte and lithium anode excess used in small lab cells is known to have a huge impact on the cycle life, capacity, and rate capability of the Li-S system. This work analyses the performance of pouch cell prototypes demonstrating the potential and hurdles of the technology. The impact of electrolyte variations and the sulfur cathode loading are studied. The energy density of Li-S pouch cell is improved up to 436 Wh kg-1 by a combination of different approaches related to cell manufacturing, sulfur cathode optimization, and electrolyte amount adjustment.

Selection and Surface Modifications of Current Collectors for Anode-Free Polymer-Based Solid-State Batteries.

Anode-free batteries (AFB) have attracted increasing interest in recent times because they allow the elimination of the conventional anode from the cell, exploiting lithium inventory from a lithiated cathode. This implies a much simpler, cost-effective, and sustainable approach. The AFB configuration with liquid electrolytes is being explored widely in research but rarely using solid electrolytes. One of the main issues of AFB is the poor reversibility of the lithium-plating/striping process at the anode side. Therefore, in this work, different metal foils have been tested as anode current collectors (CC), and copper foil has been selected as the most promising one. Surface modifications of the selected copper foil have been achieved by its coating using composite layers made of carbon and different metal nanoparticles-such as Ag, Sn, or Zn-in different proportions and with different amounts of a binder. The impact of such coatings and their thickness on the electrochemical performance of single-layer solid-state anode-free pouch cells, based on a PEO electrolyte and a LiFePO4 cathode has been systematically studied. Consequently, a post-mortem analysis of the investigated solid-state AFB is also presented, trying to identify and elucidate possible failure mechanisms to enhance the electrochemical performance of solid-state AFB in the future.

High Performance Polymer/Ionic Liquid Thermoplastic Solid Electrolyte Prepared by Solvent Free Processing for Solid State Lithium Metal Batteries.

A polymer/ionic liquid thermoplastic solid electrolyte based on poly(ethylene oxide) (PEO), modified sepiolite (TPGS-S), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and 1-Butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR14TFSI) ionic liquid is prepared using solvent free extrusion method. Its physical-chemical, electrical, and electrochemical properties are comprehensively studied. The investigated solid electrolyte demonstrates high ionic conductivity together with excellent compatibility with lithium metal electrode. Finally, truly Li-LiFePO4 solid state coin cell with the developed thermoplastic solid electrolyte demonstrates promising electrochemical performance during cycling under 0.2 C/0.5 C protocol at 60 °C.