RESUMO
Quantum dots (QDs) are inorganic semiconductor nanocrystals capable of emitting light. The current major challenge lies in the use of heavy metals, which are known to be highly toxic to humans and pose significant environmental risks. Researchers have turned to indium (In) as a promising option for more environmentally benign QDs, specifically indium phosphide (InP). A significant obstacle remains in sustaining the long-term photostability of InP-based QDs when exposed to the environment. To tackle this, electrospraying is used in this work to protect indium phosphide/zinc selenide/zinc sulfide (InP/ZnSe/ZnS) QDs by embedding them within polymer core-shell microparticles of poly[(lauryl methacrylate)-co-(ethylene glycol dimethacrylate)]/poly(methyl methacrylate) (poly(LMA-co-EGDMA)/PMMA). During the flight of droplets, the liquid monomer core of LMA and EGDMA with QDs is encapsulated by the solid shell of PMMA formed due to solvent evaporation, resulting in a liquid-core/solid-shell particle structure. After that, the captured core of monomers is polymerized into a cross-linked polymer with the embedded QDs via a thermal initiation. They demonstrate how a successful core-shell particle formation is achieved to produce structures for initially liquid monomer systems via coaxial electrospraying that are used for cross-linked polymers, which are of major interest for the encapsulation of InP-based QDs for generally improved photostability over pristine QDs.
RESUMO
Solid-state light-emitting diodes (LEDs) emit nearly monochromatic light, yet seamless tuning of emission color throughout the visible region remains elusive. Color-converting powder phosphors are therefore used for making LEDs with a bespoke emission spectrum, yet broad emission lines and low absorption coefficients compromise the formation of small-footprint monochromatic LEDs. Color conversion by quantum dots (QDs) can address these issues, but high-performance monochromatic LEDs made using QDs free of restricted, hazardous elements remain to be demonstrated. Here, we show green, amber, and red LEDs formed using InP-based QDs as on-chip color convertor for blue LEDs. Implementing QDs with near-unity photoluminescence efficiency yields a color conversion efficiency over 50% with little intensity roll-off and nearly complete blue light rejection. Moreover, as the conversion efficiency is mostly limited by package losses, we conclude that on-chip color conversion using InP-based QDs can provide spectrum-on-demand LEDs, including monochromatic LEDs that bridge the green gap.
RESUMO
InP/ZnSe/ZnS quantum dots (QDs) offer a cadmium-free solution to make white LEDs with a narrow blue, green and red emission peak. Such LEDs are required for display and lighting applications with high color gamut. An important phenomenon that hampers the efficiency of such quantum-dot-on-chip LEDs is re-absorption of already converted light by the QDs. Proposed solutions to remedy this effect often rely on complex or cost-ineffective manufacturing methods. In this work, four different RGB QD-on-chip LED package configurations are investigated that can be fabricated with a simple cavity encapsulation method. Using accurate optical simulations, the impact of QD re-absorption on the overall luminous efficacy of the light source is analyzed for these four configurations as a function of the photo-luminescent quantum yield (PLQY) of the QDs. The simulation results are validated by implementing these configurations in QD-on-chip LEDs using a single set of red and green emitting InP/ZnSe/ZnS QDs. In this way, the benefits are demonstrated of adding volume scattering particles or a hemispherical extraction dome to the LED package. The best configuration in terms of luminous efficacy, however, is one where the red QDs are deposited in the recycling cavity, while the green QDs are incorporated in the extraction dome. Using this configuration with green and red InP/ZnSe/ZnS QDs with a PLQY of 75% and 65% respectively, luminous efficacy of 102 lm/W was realized for white light with a CCT of 3000 K.
RESUMO
InP-based colloidal nanocrystals are being developed as an alternative to cadmium-based materials. However, their optical properties have not been widely studied. In this paper, the fundamental magneto-optical properties of InP/ZnSe/ZnS nanocrystals are investigated at cryogenic temperatures. Ensemble measurements using two-photon excitation spectroscopy revealed the band-edge hole state to have 1Sh symmetry, resolving some controversy on this issue. Single nanocrystal microphotoluminescence measurements provided increased spectral resolution that facilitated direct detection of the lowest energy confined acoustic phonon mode at 0.9 meV, which is several times smaller than the previously reported values for similar nanocrystals. Zeeman splitting of narrow spectral lines in a magnetic field indicated a bright trion emission. A simple trion model was used to identify a positive trion charge. Furthermore, the Zeeman split spectra allowed the direct measurement of both the electron and hole g-factors, which match existing theoretical predictions.
RESUMO
For their unique optical properties, quantum dots (QDs) have been extensively used as light emitters in a number of photonic and optoelectronic applications. They even met commercialization success through their implementation in high-end displays with unmatched brightness and color rendering. For such applications, however, QDs must be shielded from oxygen and water vapor, which are known to degrade their optical properties over time. Even with highly qualitative QDs, this can only be achieved through their encapsulation between barrier layers. With the emergence of mini- and microLED for higher contrast and miniaturized displays, new strategies must be found for the concomitant patterning and encapsulation of QDs, with sub-millimeter resolution. To this end, we developed a new approach for the direct patterning of QDs through maskless lithography. By combining QDs in photopolymerizable resins with digital light processing (DLP) projectors, we developed a versatile and massively parallel fabrication process for the additive manufacturing of functional structures that we refer to as QD pockets. These 3D heterostructures are designed to provide isotropic encapsulation of the QDs, and hence prevent edge ingress from the lateral sides of QD films, which remains a shortcoming of the current technologies.
RESUMO
Quantum dots (QDs) are semiconductor nanocrystals that are used in optoelectronic applications. Most modern QDs are based on toxic metals, for example Cd, and do not comply with the European Restriction of Hazardous Substances regulation of the European Union. Latest promising developments focus on safer QD alternatives based on elements from the III-V group. However, the InP-based QDs lack an overall photostability under environmental influences. One design path of achieving stability is through encapsulation in cross-linked polymer matrices with the possibility to covalently link the matrix to surface ligands of modified core-shell QDs. The work focuses on the formation of polymer microbeads suitable for InP-based QD encapsulation, allowing for an individual protection of QDs and an improved processibility via this particle-based approach. For this, a microfluidic based method in the co-flow regime is used that consists of an oil-in-water droplet system in a glass capillary environment. The generated monomer droplets are polymerized in-flow into poly(LMA-co-EGDMA) microparticles with embedded InP/ZnSe/ZnS QDs using a UV initiation. They demonstrate how a successful polymer microparticle formation via droplet microfluidics produces optimized matrix structures leading to a distinct photostability improvement of InP-based QDs compared to nonprotected QDs.
RESUMO
Photoluminescent color conversion by quantum dots (QDs) makes possible the formation of spectrum-on-demand light sources by combining blue LEDs with the light generated by a specific blend of QDs. Such applications, however, require a near-unity photoluminescence quantum efficiency since self-absorption magnifies disproportionally the impact of photon losses on the overall conversion efficiency. Here, we present a synthesis protocol for forming InP-based QDs with +90% quantum efficiency across the full visible spectrum from blue/cyan to red. The central features of our approach are as follows: (1) the formation of InP core QDs through one-batch-one-size reactions based on aminophosphine as the phosphorus precursor, (2) the introduction of a core/shell/shell InP/Zn(Se,S)/ZnS structure, and (3) the use of specific interfacial treatments, most notably the saturation of the ZnSe surface with zinc acetate prior to ZnS shell growth. Moreover, we adapted the composition of the Zn(Se,S) inner shell to attain the intended emission color while minimizing line broadening induced by the InP/ZnS lattice mismatch. The protocol is established by analysis of the QD composition and structure using multiple techniques, including solid-state nuclear magnetic resonance spectroscopy and Raman spectroscopy, and verified for reproducibility by having different researchers execute the same protocol. The realization of full-spectrum, +90% quantum efficiency will strongly facilitate research into light-matter interaction in general and luminescent color conversion in particular through InP-based QDs.