Photocatalytic activity of P-doped TiO2 photocatalyst.

In this study, P-doped TiO2 photocatalysts with different molar percentages (in the range 0.071-1.25 mol %) of the non-metallic element were prepared and their photocatalytic activity under visible light irradiation was tested. All achieved samples were characterized by XRD, Raman, UV-Vis DRS and SEM-EDX techniques. XRD and Raman analysis showed that all doped photocatalysts were in anatase phase and evidenced that P ions were successfully incorporated into the TiO2 crystal lattice, affecting also the crystallinity degree of the P-doped TiO2 photocatalysts. Noticeably, the UV-Vis DRS spectra evidenced that the highest redshift in absorption edge was observed for the photocatalyst with the lowest P content (0.071PT), which showed also the lowest bandgap (2.9 eV). The photocatalytic performances of all P-doped TiO2 samples were compared with that of commercial TiO2 by evaluating the decolorization of methylene blue (MB) dye under visible light irradiation. Results showed that phosphorus doping strongly promoted photocatalytic activity in the presence of visible light. Furthermore, the most active photocatalyst in visible light tests (0.071PT) also showed better photocatalytic activity than commercial TiO2 in the decolorization of MB under simulated sunlight irradiation. Finally, 0.071PT photocatalyst was preliminarily tested against Escherichia coli (E. coli) under simulated solar light, showing an inactivation efficiency of 90% after 2 h of treatment time.

Hirudo verbana as a freshwater invertebrate model to assess the effects of polypropylene micro and nanoplastics dispersion in freshwater.

Plastics are a heterogeneous class of synthetic compounds that, due to their unique characteristics find numerous applications both in industrial and civil fields. However, despite the great advantages that these materials brought in everyday life, the plastic wastes resulting from their massive use represent one of the main environmental problems at the global level. Once released, plastics persist for a long time and are subjected both to biotic and abiotic processes leading to the formation of small particles, known as micro and to nanoplastics, that interact with organisms, accumulating inside tissues and risking to enter in the trophic chain. Among the different types of plastic, polypropylene (PP) is one of the diffused, widely exploited in food and textile industries for disposable packaging and to produce surgical masks. Owing to the huge distribution and the resultant abundant presence of PP waste products, it results necessary investigate the possible toxicity on living organisms. For these reasons, here we analyzed the effects of PP micro and nanoplastics dispersed in freshwater, using the medicinal leech Hirudo verbana as invertebrate model. To better follow the plastics fate, fluorescent particles, labeled with a fluorophore, have been used. Animals were examined at various timings after plastics exposure and results were analyzed by means of microscopy, immunofluorescent and molecular biology analyses. After assessing the entrance of PP fragments into leech tissues, the activation of the innate immune response was evaluated. The results show that the presence of micro and nanoplastics induces an initial physical protection that consists in the secretion of mucus, followed by an increase of blood vessels and the recruitment of immune cells, in particular macrophages. Moreover, macrophages were directly involved in both phagocytic and encapsulation processes, as demonstrated by acid phosphatase (ACP) histoenzymatic and Thioflavin-T assays, expressing specific pro-inflammatory factors, such as HvRNASET2 and HmAIF-1, as demonstrated by immunolocalization and qPCR experiments. Finally, the expression levels of genes related to oxidative stress-induced enzymes have been investigated, in order to evaluate the possible increase in reactive oxygen species (ROS), due to the entry into the leech tissues of PP micro and nanoplastics. This work allows deepening the current knowledge of the possible harmful effects on human health deriving from micro and nanoplastics dispersion, leading new insight about freshwater ecosystems that often represent the first environments interested in plastic pollution.

Polydopamine-Coated Poly-Lactic Acid Aerogels as Scaffolds for Tissue Engineering Applications.

Poly-L-lactic acid (PLLA) aerogel-based scaffolds were obtained from physical PLLA gels containing cyclopentanone (CPO) or methyl benzoate (BzOMe) molecules. An innovative single step method of solvent extraction, using supercritical CO2, was used to achieve cylindrical monolithic aerogels. The pore distribution and size, analyzed by SEM microscopy, were found to be related to the crystalline forms present in the physical nodes that hold the gels together, the stable α'-form and the metastable co-crystalline ε-form, detected in the PLLA/BzOMe and PLLA/CPO aerogels, respectively. A higher mechanical compressive strength was found for the PLLA/CPO aerogels, which exhibit a more homogenous porosity. In vitro biocompatibility tests also indicated that monolithic PLLA/CPO aerogels exhibited greater cell viability than PLLA/BzOMe aerogels. An improved biocompatibility of PLLA/CPO monolithic aerogels was finally observed by coating the surface of the aerogels with polydopamine (PDA) obtained by the in situ polymerization of dopamine (DA). The synergistic effect of biodegradable polyester (PLLA) and the biomimetic interface (PDA) makes this new 3D porous scaffold, with porosity and mechanical properties that are tunable based on the solvent used in the preparation process, attractive for tissue engineering applications.

Stereogradient Poly(Lactic Acid) from meso-Lactide/L-Lactide Mixtures.

The production of L-lactide from L-lactic acid involves a substantial formation of meso-lactide as an impurity, and, upon polymerization with the industrial catalyst tin octanoate, results in poly(L-lactic acid) of reduced crystallinity due to stereoerrors randomly distributed along the polymer chains. We describe a new approach wherein, instead of avoiding stereoerrors by removing the meso-lactide prior to polymerization, the stereoerrors in the polymer are tolerated, by crowding them in a stereogradient copolymer. A zirconium complex of an amine tris(phenolate) ligand is found to exhibit very high syndioselectivity in the ring opening polymerization catalysis of meso-lactide at room temperature, and gives rise to stereogradient copolymers in the polymerization of mixtures of meso-lactide/L-lactide in the melt at 180 °C. Relative to the stereo-random copolymers obtained with tin octanoate, the stereogradient copolymers exhibit enhanced crystallinities manifested in lower solubilities and higher melting temperatures and enthalpies.

Isoselective Polymerization of rac-Lactide by Highly Active Sequential {ONNN} Magnesium Complexes.

The coordination chemistry and the activities in the ring-opening polymerization catalysis of racemic lactide (LA) of magnesium complexes of a series of {ONNN}-type sequential monoanionic ligands are described. All ligands include pyridyl and substituted-phenolate as peripheral groups. The ligands bearing either chiral or meso-bipyrrolidine cores led to single diastereomeric complexes, whereas the ligands bearing a diaminoethane core led to diastereomer mixtures. All {ONNN}Mg-X complexes [X=Cl, HMDS (hexamethyldisilazide)] led to highly active and isoselective catalysts. The complexes bearing the chiral bipyrrolidine core exhibited the highest activities (full consumption of 5000 equiv. of rac-LA at RT within 5 min) and highest isoselectivities (Pm =0.91), as well as a living character. The complexes of the meso-bipyrrolidine based ligands were almost as active and slightly less stereoselective, while those of the diaminoethane based ligands exhibited reduced activities and isoselectivities.

The Dual-Stereocontrol Mechanism: Heteroselective Polymerization of rac-Lactide and Syndioselective Polymerization of meso-Lactide by Chiral Aluminum Salan Catalysts.

We describe alkoxo-aluminum catalysts of chiral bipyrrolidine-based salan ligands that follow the dual-stereocontrol mechanism wherein a given combination of stereogeneities at the metal site and the proximal center of the last inserted lactidyl ("match") is active towards lactide having a proximal stereogenic center of the opposite configuration, while the diastereomeric combination of stereogeneities ("mismatch") is inactive towards any lactide. Polymerization of rac-LA by the enantiomerically pure catalysts was sluggish and gave stereoirregular poly(lactic acid) (PLA) because selective insertion to a match diastereomer gives a mismatch diastereomer. The racemic catalysts showed higher activity and led to highly heterotactic PLA following polymeryl exchange between two mismatched catalyst enantiomers. A succession of match diastereomers in selective meso-LA insertions led to syndiotactic PLAs reaching a syndiotacticity degree of α=0.96. This polymer featured a Tm of 153 °C matching the highest reported value, and the highest crystallinity (ΔHm =56 J g-1 ) ever reported for syndiotactic PLA.

Polymerization of rac-Lactide Using Achiral Iron Complexes: Access to Thermally Stable Stereocomplexes.

Enantiopure poly(lactic acid) (PLA) can form stereocomplexes when enantiomeric PLA chains are mixed in equivalent amounts. Such materials provide interesting features that might be suitable for numerous applications. Despite several advantages, the main drawback of PLA is its narrow window of processing, thus limiting its use for industrial applications. Reported herein are achiral iron complexes, that are highly active, productive, and stereoselective under mild reaction conditions for the ring-opening polymerization of lactide. The corresponding catalytic systems enable the production of stereoblock polymers with high molecular weights, allowing the formation of thermally stable and industrially relevant stereocomplexes.

Block-Stereoblock Copolymers of Poly(ϵ-Caprolactone) and Poly(Lactic Acid).

A magnesium complex of the type {ONNN}Mg-HMDS wherein {ONNN} is a sequential tetradentate monoanionic ligand is introduced. In the presence of an alcohol initiator this complex catalyzes the living and immortal homopolymerization of the lactide enantiomers and ϵ-caprolactone at room-temperature with exceptionally high activities, as well as the precise block copolymerization of these monomers in a one-pot synthesis by sequential monomer addition. Copolymers of unprecedented microstructures such as the PCL-b-PLLA-b-PDLA and PDLA-b-PLLA-b-PCL-b-PLLA-b-PDLA block-stereoblock microstructures that feature unique thermal properties are readily accessed.

Group†4 Metal Complexes of Phenylene-Salalen Ligands in rac-Lactide Polymerization Giving High Molecular Weight Stereoblock Poly(lactic acid).

Phenylene-salalens-sequential tetradentate dianionic {ONNO}-type ligands that include an ortho-phenylene group bridging between an imine and amine internal donors bound to phenol arms with a broad variety of substitution patterns are described. Zirconium and hafnium complexes of the type [{ONNO}M(O-tBu)2 ] were formed as single diastereomers, which, according to crystallographic structures, featured the fac(around the amine)-mer(around the imine) wrapping mode. The reactivity and stereoselectivity in rac-lactide (rac-LA) polymerizations were found to depend on the substitution pattern: complexes featuring small groups on the imine-side phenol and bulky groups on the amine-side phenol exhibited the favorable combination of high activity and high isoselectivity (Pm ≤0.91). Isotactic stereoblock copolymers of high molecular weights were prepared. The polymers crystallized in the stereocomplex phase according to thermal (differential scanning calorimetry) and crystallographic analysis.

Tailor-Made Stereoblock Copolymers of Poly(lactic acid) by a Truly Living Polymerization Catalyst.

Poly(lactic acid) (PLA) is a biodegradable polymer prepared by the catalyzed ring opening polymerization of lactide. An ideal catalyst should enable a sequential polymerization of the lactide enantiomers to afford stereoblock copolymers with predetermined number and lengths of blocks. We describe a magnesium based catalyst that combines very high activity with a true-living nature, which gives access to PLA materials of unprecedented microstructures. Full consumption of thousands of equivalents of L-LA within minutes gave PLLA of expected molecular weights and narrow molecular weight distributions. Precise PLLA-b-PDLA diblock copolymers having block lengths of up to 500 repeat units were readily prepared within 30 min, and their thermal characterization revealed a stereocomplex phase only with very high melting transitions and melting enthalpies. The one pot sequential polymerization was extended up to precise hexablocks having "dialed-in" block lengths.

Selective Photocatalytic Reduction of Nitrobenzene to Aniline Using TiO2 Embedded in sPS Aerogel.

In recent years, aromatic substances have become the focus of environmental pollution-related concern due to their high stability and mutagenicity. In this regard, researchers have focused their attention on the development of photocatalytic processes to convert nitroaromatic compounds into aniline. In this work, the photocatalytic conversion of nitrobenzene (NB) to aniline (AN) was studied. The photocatalytic reaction was performed using commercial TiO2 (P25) and a photocatalytic aerogel, based on P25 embedded in syndiotactic polystyrene (sPS) aerogel (sPS/P25 aerogel) as photocatalysts. Different alcohols were used as hydrogen sources during the photocatalytic experiments. At the optimized operating conditions (photocatalysts dosage: 0.5 mg/L and 50% (v/v) EtOH%), an AN yield of over 99% was achieved. According to the results, this work could open avenues toward effective production of AN from NB using mild reaction conditions with sPS/P25 aerogel-in view of a possible scale-up of the photocatalytic process.

Nanoporous-Crystalline Poly(2,6-dimethyl-1,4-phenylene)oxide Aerogels with Selectively Sulfonated Amorphous Phase for Fast VOC Sorption from Water.

This paper describes the preparation and characterization of poly(2,6-dimethyl-1,4-phenylene)oxide (PPO) highly porous monolithic aerogels with a hydrophobic nanoporous-crystalline phase and a hydrophilic sulfonated amorphous phase. The sulfonated aerogels were obtained by the sulfonation of PPO physical gels, followed by the supercritical CO2 extraction of solvents. WAXD and FTIR analysis showed that the nanoporous-crystalline phase was preserved for a degree of sulfonation up to c.a. 35%, allowing a highly volatile organic compound (VOC) sorption capacity. The sulfonated PPO aerogels exhibited a high water sorption capacity, with a water uptake of up to 500 wt%, and faster VOC sorption kinetics from water with respect to unsulfonated aerogels.

Copolymerization of L-Lactide and ε-Caprolactone promoted by zinc complexes with phosphorus based ligands.

The zinc complexes 1 and 2 bearing chelating phosphorous based pincer ligands were found to catalyze the ring-opening copolymerization of L-lactide and ε-caprolactone in the melt at 110 °C to obtain a series of random copolymers in which the monomer distributions were coherent with the monomer ratio in the feed. All the obtained copolymers showed high molecular masses with monomodal and moderately narrow distributions. The thermal properties of the achieved copolymers (Tg, glass transition temperature, and Tm, melting temperature) were strongly dependent on their composition. A linear dependence of Tg with molar percentage of lactide in the copolymers was observed over a temperature range from -59 °C (pure polycaprolactone) to 55 °C (pure polylactide).

Aluminium complexes of salanol ligands: coordination chemistry and stereoselective lactide polymerization.

The tetradentate dianionic {ONNO}-type salanol ligands featuring phenolate and alcoholate arms and a chiral-bipyrrolidine core are introduced. The diastereoselectively-formed {ONNO}-Al-OBn complexes catalyze the ring-opening polymerization of rac-lactide and meso-lactide by either the dual stereocontrol or the chain-end stereocontrol mechanisms to give PLAs of all possible tacticities.

Molecular sensing by nanoporous crystalline polymers.

Chemical sensors are generally based on the integration of suitable sensitive layers and transducing mechanisms. Although inorganic porous materials can be effective, there is significant interest in the use of polymeric materials because of their easy fabrication process, lower costs and mechanical flexibility. However, porous polymeric absorbents are generally amorphous and hence present poor molecular selectivity and undesired changes of mechanical properties as a consequence of large analyte uptake. In this contribution the structure, properties and some possible applications of sensing polymeric films based on nanoporous crystalline phases, which exhibit all identical nanopores, will be reviewed. The main advantages of crystalline nanoporous polymeric materials with respect to their amorphous counterparts are, besides a higher selectivity, the ability to maintain their physical state as well as geometry, even after large guest uptake (up to 10-15 wt%), and the possibility to control guest diffusivity by controlling the orientation of the host polymeric crystalline phase. The final section of the review also describes the ability of suitable polymeric films to act as chirality sensors, i.e., to sense and memorize the presence of non-racemic volatile organic compounds.

Highly Robust and Selective System for Water Pollutants Removal: How to Transform a Traditional Photocatalyst into a Highly Robust and Selective System for Water Pollutants Removal.

Highly porous monolithic aerogels based on ZnO photocatalyst and syndiotactic polystyrene (s-PS) were obtained by supercritical CO2 treatment of ZnO/s-PS gels. The prepared aerogels were characterized and their photocatalytic activity was evaluated using phenol and toluene as water pollutant models. The s-PS nanoporous crystalline phase, able to absorb pollutant molecules, was proven to be necessary to ensure high photocatalytic efficiency as the aerogel acts not only as a support, but also as pollutant pre-concentrator. The reusability of ZnO/s-PS aerogels is also strong showing no decrease in photocatalytic activity after six consecutive degradation trials. Finally, the aerogel matrix prevents ZnO dissolution occurring under acidic conditions and promotes a selective removal of the pollutants. The synergy between the photocatalyst and the innovative polymeric support provides the composite system with robustness, chemical stability, easy recovery after treatment, high efficiency of pollutant removal with a marked selectivity which make these materials promising for large scale applications.

Stereoselective Ring-Opening (Co)polymerization of ß-Butyrolactone and ε-Decalactone Using an Yttrium Bis(phenolate) Catalytic System.

An effective route for ring-opening copolymerization of ß-butyrolactone (BBL) with ε-decalactone (ε-DL) is reported. Microstructures of the block copolymers characterized by 13C NMR spectroscopy revealed syndiotactic-enriched poly(3-hydroxybutyrate) (PHB) blocks. Several di- and triblock copolymers (PDL-b-PHB and PDL-b-PHB-b-PDL, respectively) were successfully synthesized by sequential addition of the monomers using (salan)Y(III) complexes as catalysts. The results from MALDI-ToF mass spectrometry confirmed the presence of the copolymers. Moreover, thermal properties of the block copolymers were also investigated and showed that the microphase separation of PDL-b-PHB copolymers into PHB- and PDL-rich domains has an impact on the glass transition temperatures of both blocks.

Divergent [{ONNN}Mg-Cl] complexes in highly active and living lactide polymerization.

Chloro-magnesium complexes of divergent tetradentate-monoanionic {ONNN}-type ligands which formed as either mononuclear or dinuclear complexes are reported. These complexes catalyze the ring-opening polymerization of lactide with high activity and in a living manner, and enable the synthesis of well-defined stereo-diblock copolymers with Mn > 200 kDa, as well as stereo-n-block copolymers (n = tri, tetra) with high molecular weights by sequential monomer addition. Thermal and crystallographic characterizations revealed that even the very high molecular weight PLA copolymers crystallized in a stereocomplex phase, and that their degradation temperature was as high as 354 °C.

Monolithic polymeric aerogels with VOCs sorbent nanoporous crystalline and water sorbent amorphous phases.

Monolithic syndiotactic polystyrene (s-PS) aerogels, formed by highly crystalline nanofibrils with a hydrophobic nanoporous-crystalline phase and a hydrophilic amorphous phase have been prepared and characterized. These aerogels, with a high degree of sulfonation of the amorphous phase and nearly negligible sulfonation of the crystalline phase, are obtained by treating physical gels exhibiting δ-clathrate form. With respect to unsulfonated nanoporous-crystalline polymeric aerogels, these new selectively sulfonated aerogels present the great advantage of a high water diffusivity and water uptake up to 600 wt %. This water uptake increases greatly the sorption kinetics of organic pollutants by the hydrophobic nanopores of the crystalline phase. For instance, for aerogels with a sulfonation of 10%, the diffusivity of a volatile organic compound (1,2-dichloroethane, DCE) from 10 ppm aqueous solution is more than 3 orders of magnitude higher than that for the unsulfonated aerogel and is very close to the DCE diffusivity in water.