Investigation on Luminescence Properties of Dy3+ Ions Doped NaBaB9O15 Phosphors for Optoelectronic Applications.

A series of Dy3+ ions doped NaBaB9O15 phosphors with different dopant concentration was synthesized by solid state reaction. The phase purity was checked by X-ray diffraction analysis and the functional groups present in as prepared phosphors was investigated with the help of FTIR spectral analysis. Under 386 nm excitation, the photoluminescence spectra exhibit three emission bands around 482 nm, 574 nm and 664 nm due to 4F9/2→6HJ/2 (J = 15, 13, 11) transions respectively. The optimum doping concentration of Dy3+ ions was found to be 5 mol%. The color coordinates are estimated from the emission spectra to check the dominant emission color and the color coordinates of the studied phosphors are fall on white region of CIE 1931 diagram. The decay curve analysis was made to determine the lifetime of excited state of Dy3+ ions and the decay curves are exhibited bi-exponential behavior irrespective of Dy3+ ion concentration. All these measurents are done in room temperature and the results obtained from these studies are discussed in detail to claim their usage in light emitting devices.

Carbon nanotubes synthesis over coal ash based catalysts using polypropylene waste via CVD process: Influence of catalyst and reaction temperature.

Coal ash containing significant amount of SiO2 and Al2O3 is utilized as a catalyst substrate for carbon nanotubes (CNTs) synthesis. Three different types of catalysts were made by impregnating coal ash with cobalt, iron, and nickel. These catalysts were used to produce CNTs through pyrolysis of waste polypropylene followed by chemical vapor deposition. The influence of catalyst type and reaction temperature (700, 800 and 900 °C) on CNTs yield and its quality was studied in detail. The produced CNTs were characterized by thermogravimetric analysis (TGA), Raman scattering and electron microscopes (FESEM and HRTEM). The TGA results revealed that the Ni catalyst produced CNTs with highest yield (266 %) compared to those synthesized over and Fe (96 %) and Co (95 %). However, the yield of the CNTs from all three metal impregnated coal ash based catalysts was found to have decreased with increase in reaction temperature. The thermal stability of CNTs obtained over different catalysts followed the order of Fe (570 °C) > Ni (550 °C) > Co (530 °C). Further, the Raman analysis demonstrated that the produced CNTs over different catalysts showed increasing degree of graphitization with the rise in reaction temperature. Additionally, the ID/IG ratios indicated that CNTs produced from Fe catalyst showed highest degree of graphitization followed by Co and Ni. FESEM and HRTEM analysis showed that the coal ash based catalysts produced multiwalled CNTs and the diameter of the CNTs was increasing with the rise in catalysis temperature. Therefore, co-utilization of coal ash and waste plastic for production of high value CNTs can be a sustainable approach to waste management while actively contributing in circular economy.

Influence of ultraviolet and chemical treatment on the biodegradation of low-density polyethylene and high-density polyethylene by Cephalosporium strain.

In the present work, the potential of Cephalosporium strain in degrading the pre-treated (ultraviolet irradiation followed by nitric acid treatment) low-density polyethylene and high-density polyethylene films was investigated. Our observations revealed a significant weight reduction of 24.53 ± 0.73% and 18.22 ± 0.31% in pre-treated low-density polyethylene and high-density polyethylene films respectively, after 56 days of incubation with the Cephalosporium strain. Changes in the physicochemical properties of the mineral salt medium (MSM) were studied to assess the extent of biodegradation. The pH of the MSM decreased gradually during the incubation period, whereas its total dissolved solids and conductivity values increased steadily. Fourier transform infrared spectroscopy (FTIR) indicated the formation of hydroxyl and C = C groups in biodegraded low-density polyethylene films, while in the case of biodegraded high-density polyethylene films it indicated the [Formula: see text]CH2 stretching. Furthermore, the thermogravimetric analysis (TGA) revealed an enhancement in the thermal stabilities of both the LDPE and HDPE films post the biodegradation. Modifications in the polymer surface morphologies after UV irradiation, chemical treatment, and biodegradation steps were visualized via scanning electron microscopy (SEM) analysis. All our observations confirm the ability of the Cephalosporium strain in biodegrading the pre-treated LDPE and HDPE films.

Influence of nitric acid on biodegradation of polystyrene and low-density polyethylene by Cephalosporium species.

Petroleum-based polymers are not susceptible to microorganisms because of its high molecular weight. Acid treatments convert the polymers into a more oxidized form having low molecular weight. The present in-vitro degradation study focuses on the potential of Cephalosporium species to degrade acid-treated polystyrene (PS) and low-density polyethylene (LDPE) films. A weight loss of around 12% and 13% was achieved for PS and LDPE films respectively in eight weeks of treatment with Cephalosporium species. Fourier transform infrared spectroscopy analysis showed the formation of hydroxyl and carbonyl groups in nitric acid treated PS and LDPE films, respectively. Scanning electron microscopy indicated modifications in the surface morphology of PS and LDPE films after chemical and microbial treatment. An increase in crystallinity of pre-treated polymer samples was observed after fungal treatment. The observations of present study confirmed the enzymatic deterioration and assimilation of pre-treated PS and LDPE samples by the microbial species.

Synergistic effect of UV and chemical treatment on biological degradation of Polystyrene by Cephalosporium strain NCIM 1251.

The present study approaches the capability of Cephalosporium strain NCIM 1251 to degrade pre-treated polystyrene films. Polystyrene was initially treated with UV for the introduction of oxygen molecules in pure polystyrene samples. UV treatment inserts aliphatic ketones functional group in polystyrene whereas it created C-C stretching after chemical treatment in UV-treated polystyrene as analyzed by Fourier-transform infrared spectroscopy (FTIR). The gravimetric study confirmed a decline in the weight of the pre-treated polystyrene by 20.62 ± 1.47% after 8 weeks of the incubation period. pH, total dissolved solids (TDS), and conductivity of mineral salt media were correlated with the extent of biodegradation. Treatment with UV and acid increased the thermal stability of pure polystyrene, whereas thermal stability decreased in pre-treated polystyrene after incubation with Cephalosporium strain NCIM 1251 as studied by Thermogravimetric analysis (TGA). Scanning Electron Microscopy (SEM) analysis observed revisions in the morphology and surface patterns in pre-treated polystyrene after inoculation with Cephalosporium strain NCIM 1251. The observed findings suggest that the Cephalosporium strain NCIM 1251 could be efficient for the decomposition of pre-treated polystyrene.

Synergistic effect of UV, thermal, and chemical treatment on biological degradation of low-density polyethylene (LDPE) by Thermomyces lanuginosus.

The present analysis deals with the ability of Thermomyces lanuginosus to degrade pre-treated low-density polyethylene (LDPE). The synergistic effect of UV irradiation, heat, and acid pre-treatments on the biodegradability of the polymer was thoroughly assessed. Oxidative structural modifications such as the appearance of carboxylate and carbonyl groups in LDPE chains were recorded post the UV and heat treatments. Furthermore, the nitric acid treatment incorporated NO2 groups into the polymer matrix. Alterations in the polymer thermal stabilities and surface morphologies after each pre-treatment were analyzed using thermogravimetric analysis and scanning electron microscopy (SEM), respectively. The gravimetric analysis revealed a reduction in the weight of the pre-treated LDPE films by 9.21 ± 0.84% after 1 month of the incubation period with Thermomyces lanuginosus. An increase in the thermal stability, disappearance of the incorporated hydrophilic functional groups, and reduction in the carbon content of the polymer samples post the incubation period further justified the biodegradation process. SEM analysis showed modifications in the morphology and texture patterns in pre-treated LDPE after inoculation with Thermomyces lanuginosus. The findings suggest that Thermomyces lanuginosus could be efficient for the decomposition of pre-treated LDPE under laboratory conditions.

A review on biocide reduced susceptibility due to plasmid-borne antiseptic-resistant genes-special notes on pharmaceutical environmental isolates.

Biocides (antiseptics and disinfectants) are widely used in hospitals and pharmaceutical industries for contamination control. The emergence of reduced susceptibility to biocides is the major concern and this is caused by various factors, among which plasmid-mediated resistance is common. Many publications describe the antibiotic resistance and mechanisms in a clinical setting. However, there are only limited studies available worldwide addressing the molecular mechanisms of biocide resistance in the pharmaceutical sector. In addition, there is a considerable lack of scientific reports regarding minimum inhibitory concentration (MIC) values of typical biocides against pharmaceutical cleanroom environmental isolates. This review analyses the plasmid-mediated resistance in typical pharmaceutical micro-organisms and prevalence of biocide-resistant genes among common clinical and pharmaceutical isolates. This review discusses the MIC values of biocides in pharmaceutical environmental isolates, indicating the importance of the correlation between the presence or absence of biocide-resistant genes and reduced susceptibility of MIC values. This review recommends that pharmaceutical organizations adopt policies and test methodologies to examine the MICs of common cleanroom biocides against the most common types of cleanroom environmental isolates.

Mcp1 Promotes Macrophage-Dependent Cyst Expansion in Autosomal Dominant Polycystic Kidney Disease.

BACKGROUND: In patients with autosomal dominant polycystic kidney disease (ADPKD), most of whom have a mutation in PKD1 or PKD2, abnormally large numbers of macrophages accumulate around kidney cysts and promote their growth. Research by us and others has suggested that monocyte chemoattractant protein-1 (Mcp1) may be a signal for macrophage-mediated cyst growth. METHODS: To define the role of Mcp1 and macrophages in promoting cyst growth, we used mice with inducible knockout of Pkd1 alone (single knockout) or knockout of both Pkd1 and Mcp1 (double knockout) in the murine renal tubule. Levels of Mcp1 RNA expression were measured in single-knockout mice and controls. RESULTS: In single-knockout mice, upregulation of Mcp1 precedes macrophage infiltration. Macrophages accumulating around nascent cysts (0-2 weeks after induction) are initially proinflammatory and induce tubular cell injury with morphologic flattening, oxidative DNA damage, and proliferation-independent cystic dilation. At 2-6 weeks after induction, macrophages switch to an alternative activation phenotype and promote further cyst growth because of an additional three-fold increase in tubular cell proliferative rates. In double-knockout mice, there is a marked reduction in Mcp1 expression and macrophage numbers, resulting in less initial tubular cell injury, slower cyst growth, and improved renal function. Treatment of single-knockout mice with an inhibitor to the Mcp1 receptor Ccr2 partially reproduced the morphologic and functional improvement seen with Mcp1 knockout. CONCLUSIONS: Mcp1 is upregulated after knockout of Pkd1 and promotes macrophage accumulation and cyst growth via both proliferation-independent and proliferation-dependent mechanisms in this orthologous mouse model of ADPKD.

Endovascular Management of Radiation-Induced Hemorrhagic Cystitis.

Radiation-induced hemorrhagic cystitis (HC) is an unpleasant and sometimes life-threatening complication confronted while treating pelvic malignancies. A wide array of treatment modalities such as bladder irrigation, fulguration, hyperbaric oxygen therapy, and surgical methods has been proposed to treat hematuria, but there is no consensus on the optimal therapeutic strategy for the same. Reported here is a successful superselective embolization of the bilateral vesical arteries in a patient with refractory radiation-induced HC. This technique proved to be effective in controlling intractable hemorrhage and can be considered an option for the treatment of HC not amenable to conventional techniques.

Soluble expression and purification of a full-length asparaginyl tRNA synthetase from Fasciola gigantica.

We report the molecular cloning, expression, and single-step homogeneous purification of a full-length asparaginyl tRNA synthetase (NRS) from Fasciola gigantica (FgNRS). Fasciola gigantica is a parasitic liver fluke of the class Trematoda. It causes fascioliasis that infects the liver of various mammals, including humans. Aminoacyl tRNA synthetases (AARS) catalyze the first step of protein synthesis. They attach an amino acid to its cognate tRNA, forming an amino acid-tRNA complex. The gene that codes for FgNRS was generated by amplification by polymerase chain reaction. It was then inserted in the expression vector pQE30 under the transcriptional control of the bacteriophage T5 promoter and lac operator. M15 Escherichia coli strain transformed with the FgNRS expression vector pQE30-NRS accumulates large amounts of a soluble protein of about 61 kDa. The protein was purified to homogeneity using immobilized metal affinity chromatography. The recombinant protein was further confirmed by immunoblotting with anti-His antibody. Following size exclusion chromatography, the FgNRS was stable and observed to be a dimeric protein. In this study, the expression and purification procedures have provided a simple and efficient method to obtain full-length FgNRS in large quantities. This will provide an opportunity to study the structure, dynamics and function of NRS.

Oral neoplasms in pickhandle barracuda Sphyraena jello from India.

We report the spontaneous occurrence of oral neoplasms in pickhandle barracuda Sphyraena jello Cuvier, 1829 from Parangipettai, on the southeast coast of India. A total of 11736 fish were examined, of which 43 were affected with oral tumours, with an overall prevalence of 0.37%. Gross and clinical symptoms included reddish to grayish-white distended tumourous growths on the gingiva, intra-oral bones and tongue. The tumours exhibited delayed eruption and intra- or extra-oral swelling, varied in consistency from extremely firm to fleshy and released mucinous material. The majority of tumours consisted of numerous clumped toothlets, but some included hardened tissues. Local area invasion/transmission was observed in most cases; however, necropsy examination revealed no gross evidence of distant metastasis into visceral organs. Radiographic examination of compound odontomas revealed distinct unilocular radio-opaque mini-toothlets surrounded by defined radiolucency, whereas complex odontomas exhibited unilocular and indistinct radio-opaque masses within a much more extensive radiolucent zone. Histopathologically, the intra-oral tumour lesions were characterized by numerous imperfect (germ) toothlets consisting of a disorganized combination of dental tissues: pulp tissues with manifested and predominantly mixed hard dental tissues of immature dentine and enamel, numerous small to large and round to polyhedral ossicles embedded in hypocellular fibrous stromal tissues and sparsely spaced bland spindloid cells with cleft-like spaces of loose mucoid stroma. Histochemically, the neoplastic lesions stained positive for periodic acid-Schiff and Masson's trichrome. Based on the clinical and histological findings, the tumours were diagnosed as compound odontomas, complex odontomas, odontogenic myxomas, lingual myxomas and psammomatoid ossifying fibromas.

A review of melanized (black) fungal contamination in pharmaceutical products--incidence, drug recall and control measures.

The aim of this study was to describe the incidence of contamination of pharmaceutical products by melanized fungi and to consider control measures in relation to bioburden and cleanrooms. This study reviews and analyses pharmaceutical product recalls and offers incidence rates of fungal detection from a typical cleanrooms. The recalls include some serious cases which resulted in the loss of life. Of different types of fungal contamination incidences some of the most damaging have been due to melanized fungi ('black mould'), such as Exserohilum rostratum. The focus of the article is with melanized fungi. The study concludes that, from the review of recent pharmaceutical product recalls, fungal contamination is either increasingly common within cleanroom environments or the accuracy of sampling and the level of reporting has risen. The prevalence of melanized fungi in pharmaceutical facilities rests on specific virulence factors particular to these types of fungi, which are outlined. The article identifies a gap in the way that such fungi are screened for using available cultural methods. The article provides some control strategies, including assessing the suitability of disinfectants and biocides, for reducing the risk of melanized fungal incidences within the pharmaceutical facility. Understanding the fungal risk to pharmaceutical products remains a poorly understood and often overlooked aspect of pharmaceutical microbiology. This article helps to identify this risk and offer some guidance to those involved with pharmaceutical products manufacture in relation to bio-contamination control strategies.

Glycogen synthase kinase-3ß promotes cyst expansion in polycystic kidney disease.

Polycystic kidney diseases (PKDs) are inherited disorders characterized by the formation of fluid filled renal cysts. Elevated cAMP levels in PKDs stimulate progressive cyst enlargement involving cell proliferation and transepithelial fluid secretion often leading to end-stage renal disease. The glycogen synthase kinase-3 (GSK3) family of protein kinases consists of GSK3α and GSK3ß isoforms and has a crucial role in multiple cellular signaling pathways. We previously found that GSK3ß, a regulator of cell proliferation, is also crucial for cAMP generation and vasopressin-mediated urine concentration by the kidneys. However, the role of GSK3ß in the pathogenesis of PKDs is not known. Here we found that GSK3ß expression and activity were markedly upregulated and associated with cyst-lining epithelia in the kidneys of mice and humans with PKD. Renal collecting duct-specific gene knockout of GSK3ß or pharmacological inhibition of GSK3 effectively slowed down the progression of PKD in mouse models of autosomal recessive or autosomal dominant PKD. GSK3 inactivation inhibited cAMP generation and cell proliferation resulting in reduced cyst expansion, improved renal function, and extended life span. GSK3ß inhibition also reduced pERK, c-Myc, and cyclin-D1, known mitogens in proliferation of cystic epithelial cells. Thus, GSK3ß has a novel functional role in PKD pathophysiology, and its inhibition may be therapeutically useful to slow down cyst expansion and progression of PKD.

Characterization and structure elucidation of antibacterial compound of Streptomyces sp. ECR77 isolated from east coast of India.

Forty marine actinobacteria were isolated from the sediments of east coast (Bay of Bengal) region of Tamilnadu, India. Morphologically distinct colonies were primarily tested against fish pathogenic bacteria such as Vibrio cholerae, V. parahaemolyticus, V. alginolyticus, Pseudomonas fluorescens and Aeromonas hydrophila by cross-streak plate method. The secondary metabolites produced by the highly potential strain cultured on starch casein broth were extracted separately with various solvents such as alcohol, ethyl acetate, methanol, petroleum ether and chloroform. The antibacterial assay of the bioactive compounds was tested against the fish pathogenic bacteria by well diffusion method. Of the various solvents used, the ethyl acetate extract of the isolate had good antibacterial activity. The potential strain was identified as Streptomyces labedae by phenotypic, 16S rRNA gene sequence and phylogenetic analysis. Purification of the biologically active compounds by column chromatography led to isolation of 27 fractions. The biologically active fraction was re-chromatographed on a silica gel column to obtain a single active compound, namely N-isopentyltridecanamide. The structure of the compounds was elucidated on the basis of ultra violet, Fourier transform infrared and nuclear magnetic resonance spectra.

In vitro fungicidal activity of biocides against pharmaceutical environmental fungal isolates.

AIMS: To determine the minimum inhibitory concentrations (MIC) of a range of cleanroom fungi against three disinfectants common to the pharmaceutical and healthcare sectors: biguanide (chlorhexidine) and two quaternary ammonium compounds (benzalkonium chloride and cetrimide). METHODS AND RESULTS: The in vitro fungicidal activities of the three biocides were studied against 112 cleanroom fungal isolates using broth microdilution technique (CLSI M38-A2 standard). CONCLUSIONS: Minimum inhibitory concentration (MIC) for all three biocides against hyaline fungi showed results of not more than 16 µg ml(-1). Alternaria showed <32 µg ml(-1) and other dematiaceous fungi reported that 8-16 µg ml(-1) for biguanides and QACs. This study clearly demonstrates that the most frequently isolated micro-organisms from an environmental monitoring programme may be periodically subjected to broth microdilution testing with cleanroom disinfectant agents used in the disinfection programme confirm their sensitivity profile. SIGNIFICANCE AND IMPACT OF THE STUDY: No large collection of data exists on the activity of biocides on pharmaceutical cleanroom fungal isolates. This is the first study report with large collection of cleanroom fungal isolates tested against common biocides using the broth microdilution antifungal susceptibility testing to determine the MIC value. The data presented support a quality control procedure for cleanroom disinfection.

Occurrence of tumour (odontoma) in marine fish Sphyraena jello from the southeast coast of India.

We examined the occurrence of odontoma in the marine fish Sphyraena jello sourced from 3 different landing centers (Cuddalore, Parangipettai and Nagapattinam) in Tamil Nadu (southeast India). A total of 19783 fishes were examined for odontoma presence, of which 2393 were affected with odontoma. The overall prevalence was 12.1% among the 3 stations. Fish landed at Parangipettai showed the highest peak prevalence of odontoma (16.8%) during the pre-monsoon, followed by Nagapatinam (9.1%) during summer 2011. The tumour lengths in premaxilla, supermaxilla and dentary bone were 1.1-3.6, 1.4-5.9 and 1.2-4.1 cm, respectively, and tumour widths were 0.3-1.9, 0.7-3.1 and 0.5-1.9 cm. Higher prevalence (0.206%) of tongue tumour along with odontoma was observed at Nagapattinam whereas it was lower (0.162%) at Cuddalore. Odontoma histopathology showed dense fibrous tissue with fine teeth roots. TEM analysis showed virus-like particles associated with odontoma. Radiography of the odontoma showed that the tumour masses were bony in nature and tissues were merged with upper and lower jaw.

An intelligent fuzzy-particle swarm optimization supervisory-based control of robot manipulator for industrial welding applications.

The propensity of manufacturers to produce goods at affordable cost, with more accuracy, and at a faster rate force them to search for novel solutions, such as deploying robots in place of people in a sector that can accommodate their needs. Welding is one of the most crucial processes in the automotive industry. This process is time-consuming, subject to error, and demands skilled professionals. The robotic application can improve this area of production and quality. Other industries, such as painting and material handling, can also profit from the use of robots. This work describes the fuzzy DC linear servo controller, which functions as a robotic arm actuator. Robots have been widely employed in most productive sectors in recent years, including assembly plates, welding, tasks at higher temperatures, etc. Controlling a robot accurately is a difficult undertaking as a robot is very nonlinear with many joints that are often organized and unstructured. To carry out the effective task, an effective PID control based on fuzzy logic has been employed together with the method of Particle Swarm Optimization (PSO) approach for the estimate of the parameter. This offline technique determines the lowest number of optimal robotic arm control parameters. To verify the controller design with computer simulation, a comparative assessment of controllers is given by means of a fuzzy surveillance controller with PSO which improves the parameter gain to provide a rapid climb, a smaller overflow, no steady condition error signal, and effective torque control of the robot arm.

Induction of fatty acid oxidation resists weight gain, ameliorates hepatic steatosis and reduces cardiometabolic risk factors.

OBJECTIVE: Fatty acid oxidation has been implicated in amelioration of obesity by burning off excessive accumulated lipid. BPR697, a peripheral cannabinoid receptor 1 (CB1) antagonist, elevated fat oxidation without added energy expenditure. Its impact on food intake, body weight changes and metabolic alterations were examined in rats fed standard chow and in diet-induced obesity (DIO) mice. MATERIALS AND METHODS: CB1 agonist-induced hypothermia and analgesia responses were measured to examine the brain activity of BPR697. The acute effects of BPR697 on food intake, body weight change and post-absorptive metabolic profiles were investigated in rats. Energy utilization with BPR697 was examined by indirect calorimetry. Chronic treatment of DIO mice was used to evaluate the long-term effects of BPR697. RESULTS: Distribution of BPR697 was significantly biased in favor of the periphery instead of the brain, as shown by its low brain/plasma concentration ratio and confirmed by the negative response of BPR697 in CB1 agonist-induced hypothermia and analgesia. When administered to rats at 20 mg kg(-1), BPR697 showed a unique spectrum of effects with significant weight loss without altered food intake. Furthermore, BPR697 increased serum levels of free fatty acids and ketone bodies and reduced hepatic lipid accumulation with preservation of liver glycogen in postprandial rats. Indirect calorimetric profiling of BPR697 revealed a similar trend, shifting whole-body energy catabolism toward fat oxidation, but without elevated energy expenditure. In DIO mice with chronic treatment, animals treated with BPR697 at 20 mg kg(-1) resisted weight gain and showed a reduction of high-fat-induced cardiometabolic abnormalities such as hyperglycemia, abdominal fat and liver steatosis. CONCLUSION: The induction of fatty acid oxidation without concomitant elevation of energy expenditure by the peripheral CB1 antagonist BPR697 is sufficient to cause substantial weight loss in chow-fed rats. In the presence of high-dietary fat intake, BPR697 resists weight gain and alleviates obesity-related cardiometabolic risk factors.

Optimization of Antimicrobial Production by a Marine Actinomycete Streptomyces afghaniensis VPTS3-1 Isolated from Palk Strait, East Coast of India.

Totally 25 marine soil samples were collected from the region of Palk Strait of Bay of Bengal, Tamil Nadu, and were subjected to the isolation of actinomycetes. Sixty-eight morphologically distinct isolates were obtained and 37% (25) of them had antimicrobial activity. The potential producer was named as Streptomyces sp. VPTS3-1 and the phylogenetic evaluation on the basis of 16S rDNA sequence further categorized the organism as Streptomyces afghaniensis VPTS3-1. Further, the antimicrobial compound was extracted from the isolate using various solvents and the antimicrobial efficacies were tested against bacterial and fungal pathogens. In addition, in vitro optimization of parameters for the antimicrobial compound production revealed that the suitable pH as 7-8, the period of incubation as 9 days, temperature (30°C), salinity (2%), and starch and KNO3 as the suitable carbon and nitrogen sources respectively in starch-casein medium.

Estimation of minoxidil in human plasma using UHPLC-MS/MS and its application in pharmacokinetic study.

Measurement of drug concentration in biological matrices (such as serum, plasma, blood, urine, and saliva) is important to determine Bioavailability (BA) and/or Bioequivalence (BE) of a drug product which are required during the drug product development and approval process to support applications for new active substances (INDs, NDAs) and generic (ANDAs) drug products to make critical decisions on safety and efficacy. Because of their vital role, bioanalytical methods should be well-characterized, fully validated and documented to yield reliable results. In present work, a simple, specific, high throughput, accurate and sensitive UHPLC-MS/MS method has been developed and validated for quantification of Minoxidil in human plasma. The analyte and the internal standard were extracted from plasma by Liquid-Liquid Extraction using ethyl acetate. The chromatographic separation was achieved on Thermo Hypersil Gold column (4.6x50mm, 5µm) using acetonitrile-0.1% formic acid in water (60:40, v/v) at a flow rate of 0.400 ml/min. Detection by turbospray positive ionization mass spectrometry in the multiple reaction monitoring mode with a mass transition ion-pair of m/z 210.152 → 163.965 (Minoxidil) and m/z 220.267 → 169.089 (Internal Standard-Minoxidil D10) was found to be linear over the concentration range of 1.280 to 151.075 ng/ml. The method was fully validated as per USFDA guidelines and the results were within regulatory limits. The inter and intra-day precision ranged from 5.42 to 9.27% and 2.55-9.42% respectively. The inter and intra-day accuracy ranged from 89.2 to 98.9% and 102-105% respectively. The method was successfully applied to a BE study involving human volunteers.